Used Okuma Lu 25 for sale (163)

Year of construction: 1999, condition: good (used), turning diameter 580 mm turning length1.500 mm Hsdpsiicllefx Aabefn X/Z 568/1660 mm Y-axis C-axis spindle 3.200 min-1 driven tools 3.000 min-1

Year of construction: 2007, condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Hodpfxsku Aaao Aabefn Table Ø 210 mm Horizontal movement support 360 mm ATC / revolver 12 Speeds / ranges 4000 Rpm C-Axis 360000 ° Dimensions (Estimate) There are no dimensions for this machine (yet). Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1998, condition: excellent (used), machine/vehicle number: 1728, CNC turret lathe Okuma LB15 immediately available The OKUMA LB 15 CNC lathe has been professionally serviced regularly since it was purchased and is in perfect technical condition. It has a hydraulic chuck with a diameter of 250 mm and a turret mount for 12 tools. The lathe spindle rotates at a speed of 70-3800 rpm and has a diameter of 75 mm. Specifications of the OKUMA LB-15 CNC lathe – CNC control: OSP 5000L-G CNC system (German) – Data transmission: RS232 – Tool turret: 12-position type BOLT ON – Lathe chuck: 250 mm – Spindle: 70-3800 rpm. (11 kW, 30 min; 7.5 kW – continuous operation) – non-continuous spindle – Spindle bore diameter: fi 75 mm (at a depth of 70 mm, measured from the face of the lathe chuck and without jaws) – Spindle bore diameter: fi 28 mm (at a depth of 200 mm, measured from the face of the lathe chuck and without jaws) – X-axis travel: 400 x 0.001 mm – Z-axis travel: 500 x 0.001 mm – Cutting speed XZ: 0.01-1000 mm / rev Hsdpsm Ux A Sefx Aabsfn – XZ feed: 12,000 mm / min. – Power supply: 3 x 400V – Machine rated power: 21 kVA – maximum load current: 36A – Machine dimensions (width x depth x height): 2.9 (3.9 m with chip conveyor) x 1.8 x 1.72 m – Machine weight: 4500 kg NC control OKUMA OSP 5000 L-G very good repeatability with chip conveyor The machine can be inspected at any time Timely, insured delivery with forwarding agency possible Inexpensive financing / installment purchase possible

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 107963, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller model: OSP U100, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 1,050 mm Y-axis travel: 560 mm Z-axis travel: 460 mm Table Max. workpiece dimensions: 1,300 x 560 mm Distance from table surface to spindle nose: 150 – 610 mm Max. table load: 900 kg Spindle Spindle speed: 15,000 rpm Spindle power: 22 / 18.5 kW Cooling through spindle: 20 bar Feed rates Rapid traverse X/Y-axis: 40 m/min Hfjdpfxewh Tfvo Aabjn Rapid traverse Z-axis: 32 m/min Working feed X/Y/Z-axis: 32 m/min Tool magazine Tool capacity: 20 tools Tool holder: BT 40 Tool selection: Memory Random MACHINE DETAILS Footprint: 2,510 x 3,100 mm Machine height: 2,476 mm Machine weight: 7,500 kg EQUIPMENT - Chip conveyor

Condition: excellent (used), Year of construction: 2010, operating hours: 15,600 h, functionality: fully functional, Spindle speed: 50-6000rpm Movement XA-XB: 205mm ZA-ZB: 700mm Hodowfr R Eepfx Aabsfn W: 730mm YA-YB: 95mm Turrets: 2x 16pos Multitasking V16 Spindlespeed live tools: 45-6000rpm Motors live tools: 5.5/3.7kW Spindle motors: 22/15kW Manufacturing year: 2010.12 Length: 3300mm Width: 2500mm Height: 2500mm Weight: 9000kg Robot interface

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 1,630 mm, turning diameter: 500 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 430 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 1,474 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, total height: 23,000 mm, total length: 54,050 mm, total width: 28,880 mm, Equipment: documentation/manual, Okuma MacTurn 30 - 1500 OSP U100L CNC-Controller Number of axis - 5 +2 Swing over bed - Ø500mm Swing over carriage - Ø500mm Max dia. turning - Ø500 mm Max turning length - 1474 mm X axis Upper travel - 430 mm X axis Lower travel - 140 mm Z axis Upper travel - 1474 mm Z axis Lower travel - 1305 mm Y axis travel - 190 mm (+95/-95mm) W axis travel - 1305 mm C axis 360° (0.001 increment) Rapid travers Upper X-axis 20,000 mm/min Lower X-axis 15,000 mm/min Upper Z-axis 25,000 mm/min Lower Z-axis 20,000 mm/min Y -axis 12,000 mm/min C-axis 200 rpm Spindle nose - JIS A2-6 Main spindle speed - 45-4500 rpm Sub spindle speed - 45-4500 rpm Main spindle power - 15 kW Sub spindle power - 15 kW Main spindle diameter - Ø100 mm Sub spindle diameter - Ø100 mm Main spindle boring - Ø62 mm Sub spindle boring - Ø62 mm Hfjdpjrdvhhofx Aabon Rotary tool spindle - 6000rpm Rotary tool spindle - 6,8kW ATC Magazine - BT40 Tool storage capacity - 40 tool Max tool dia. - Ø110 mm Max. tool lenght 300 mm Max. tool mass - 10 kg Chip conveyor type high Wight - 12100kg

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 0316, travel distance X-axis: 1,000 mm, Equipment: chip conveyor, Technical information - Okuma MC-600H General information Width: 4358 mm Depth: 12141 mm Height: 3310 mm Machine weight: 17700 kg Brand: OKUMA Model: OSP 5020M Main drive Number of spindles: 1 Speed frequency of spindle: 5000 1/min Movement X-AXIS Movement: 1000 mm Y-AXIS Movement: 800 mm Z-AXIS Movement: 750 mm Tools Hedpfxswaw S Dj Aabsfn Maximum weight: 25 kg Maximum tool diameter: ISO 50 MM Maximum tool length: 450 mm Media Main electrical connection: 380 V / 50 Hz / 3 P Power consumption: 43 kVA Swarf conveyor: Yes

Condition: good (used), Year of construction: 2000, 🔧 FOR SALE – OKUMA MX 45 VAE Vertical Machining Center 📍 Available immediately: OKUMA MX 45 VAE vertical machining center in excellent condition, ready to integrate into your workshop! 📌 Key Features: ✅ Brand: OKUMA ✅ Type: Machining Center ✅ Model: MX 45 VAE ✅ CNC: OSP-U10 M ✅ Year: 2000 ✅ X-travel: 760 mm ✅ Y-travel: 460 mm ✅ Z-travel: 450 mm ✅ Speed: 7000 rpm ✅ Table surface: 1000 x 460 mm ✅ Max. table load: 1000 kg : 500 kg ✅ Internal coolant supply ✅ Tool magazine for 20 tools Hjdpfjwwkuasx Aabsfn ✅ Tool holder: SK 40 ✅ Cutting speed x, y, z: 10 m/min ✅ Rapid traverse x, y (z): 20 (15) m/min ✅ Dimensions: 1,800 mm x 2,380 mm x 2,650 mm 📸 See photo below (machine visible on site) 📦 Condition: Very good 💰 Price: upon request 👉 Do not hesitate to contact us for more technical information, additional photos, or a visit.

Condition: excellent (used), Okuma lc40 spindle stock Hfjdpfx Aaswqgb Njben

Condition: used, Year of construction: 1989, turning length 220 mm control Fabnuc OSPL 500 L Hfedpevt Ekiofx Aabon turning diameter 150 mm weight of the machine ca. 4 t

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Hfsdju U E Avjpfx Aaben Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Okuma, controller model: OSP-E100M, workpiece length (max.): 600 mm, workpiece width (max.): 710 mm, workpiece weight (max.): 400 kg, total height: 2,760 mm, total length: 4,535 mm, total width: 2,415 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 11,500 kg, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Okuma Space Center MA400HA Horizontal Machining Centre Machine Type: CNC Horizontal Machining Centre Year: 2004 Control: OSP-E100M Axes: 4 No. of Pallets: 2 Hfjdpfxswcd Evj Aabsn Condition: Good Includes Cromar Swarf Conveyor Coolant Filtration System Technical Specifications Pallets: 2 Size of Pallets: 400 x 400mm X Axis Travel: 560mm Y Axis Travel: 610mm Z Axis Travel: 625mm B Axis Travel: 360 Deg Rapid Traverse: 60m/min Spindle Centre to Pallet Top: 50 - 660mm Spindle Nose to Pallet Centre: 85 - 710mm Max Pallet Load: 400kg Max Workpiece Dimensions: 600 x 710mm Tool Pockets: 40 Spindle Taper: BT40 Spindle Power: 15kW Spindle Speed: 10,000rpm Machine Dimensions: 4535 x 2415 x 2760mm Machine Weight: 11,500kg

Condition: used, Year of construction: 1996, Switch-on time: 68743 h Hfedjvfucfjpfx Aabsn Spindle hours: 17338 h