Double mitre crosscut saw

OMGA TR2A

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces Gsdpfxjx Sq E Is Ah Hoil - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), Cambio debarking line, max. debarking diameter 450 mm, cross-feed conveyor with a length of 12.5 m Giodpfx Ahowvhkve Hel

Condition: excellent (used), Year of construction: 1994, TECHNICAL DATA - Max. disc diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 units - Pneumatic cutting (saw blade movement up/down) Gedpfexrl Rijx Ah Hsil - Saw units adjustable to a 45° angle - Manual adjustment of the saw unit spacing - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2,820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamping devices: 2 units - Foot switch control - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3,620×1,100×1,250 mm - Weight: approx. 500 kg – Unpainted – Swiveling saw units – Used saw, in very good condition

Condition: used, functionality: limited functionality, cutting height (max.): 90 mm, cutting width (max.): 140 mm, cutting length (max.): 2,820 mm, total width: 950 mm, total length: 3,600 mm, total height: 1,250 mm, saw blade diameter: 300 mm, type of input current: three-phase, rotational speed (min.): 3,000 rpm, OMGA TR2-A Double Mitre Saw for Wood and Aluminium Specifications: • Condition - used, requires adjustments and minor repairs • Manufacturer - OMGA • Model - TR2-A • Main motors - 2 x 2.2 kW (3,000 rpm) • Pneumatic head control • Max cutting length - 282 cm • Min cutting length - 15 cm • Max cutting cross-section - 90x140 mm (at right angles) • Max blade diameter - 300 mm • Extraction nozzles diameter 80 mm • Angle cutting range from -45 to +45 degrees (right, left) • Vertical clamps for material hold-down • Weight - approx. 600 kg • Overall dimensions - 360 x 95 x 125 cm (L x W x H) Additional information: • Machine operational but requires minor fixes and adjustments • Provided photos show the actual condition of the item for sale Gjdpfxexl Ecxs Ah Hsil • Possibility to power up and test the machine on site

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Gijdpfx Ahed N Rb Ds Hsl Drilling front heads on each side included Very good condition. Available immediately.

Condition: ready for operation (used), Technical characteristics Distance between blades: 225 to 2800 mm Minimum distance between blades at 45°: 385 mm Cutting capacity at 90°: 140 mm Cutting capacity at 45°: 102 mm Max. cutting height: 90 mm Blade diameter: 300 mm Suction: 2 x 80 mm Godpfx Ahsuciq Ts Hsil Pneumatic clamping system Simultaneous blade lowering Power and Motors Voltage: 380 V Pluging: Three-phased Power: 5 Kw Motor: 2 x 3 CV Overall dimensions Lenght: 4000 mm Width: 650 mm Height: 1400 mm Weight: 800 Kg

Year of construction: 1972, condition: used, machine/vehicle number: 51512/72, pression: 75 t throat: 300 mm table size: 620 x 800 mm clearance hole in the die: 225 x 325 mm table adjustment: 175 mm tappet area: 180 x 475 mm Gijdpfxob Tdque Ah Hel tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW space needed: 1700 x 1200 x 2500 mm weight: 3,3 t

Condition: good (used), Edger line / automatic edger / double edger with automatic measurement and adjustment EWD Esterer Type: DK90 TL 1000 Year of construction: 1994 Maximum passage width: 1000 mm Maximum cutting height: 120 mm 2-stile variable Measurement Combimes with S-conveyor with cross-cut saw with Esterer ARS TR infeed with 2-lamellar splinter separator new saw shaft, new bearings and new chains 3 years ago. Incl: External infeed for boards to DK90 with tilt destacking Gedpfjvg Ecfox Ah Hsil with cross conveyor

Condition: used, Cutting thickness calculator for log band saw Cutting thickness computer Alternative to the Mudata control system with the option of individual customization Touch industrial PC Siemens Simatic S7 with rotary encoder or other measuring system Gijdpfxjiwaxnj Ah Hol Cutting programs are easy to change Cutting programs can also be divided into groups Program is adapted according to customer requirements Operation via touch display or keyboard possible The next step in the cutting program via buttons on the joystick All relevant values can be shown individually on the display (e.g. total distance, next cut, complete cutting program, dimension of the previous cut, feed speed, etc.) all parameters can be displayed and changed on their own parameter page or on the main page the sensor of a blade deviation monitor can be evaluated (possibly linked to feed speed) Infeed via proportional valve and hydraulic motor or via a stepper motor Inspection also possible in operation currently in operation with Primultini SGA 1300 CEB Suitable for any trolley size and make For a viewing appointment or further details please contact us by phone.

Condition: ready for operation (used), Slab recovery line with below machines: Gijdegwqk Sjpfx Ah Hol One 2-blade board edger One single blade horisontal resaw Conveyors system between the machines included.