Automatic pneumatic end cutting saw

OMGA T521

Condition: new, working length 2451 mm Working width 2170 mm Working height 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor Ledpfx Aji Hmpiji Hjrr - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW - Approximately 1750mm lock to lock Roller conveyor - outlet - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG ----- Conveyor belt approx. 320mm x 3500mm base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor belt for wood lengths from 300mm to 4200mm - Conveyor belt for timber widths up to 240mm - Conveyor belt on castors with brake tape - Continuously driven approx. 5 - 25m/min - Drive via geared motor 0.37kW - Tape PVC coated 260mm wide - Stop on both sides approx. 15mm ----- Steering: - Ready to plug in with its own controller and logic - Siemens PLC, 24VDC - Siemens frequency converter - Optical limit switches and emergency stop loop - Ready installed with 16A Euro plug - Connection: 400V AC, 2kW, 50Hz ----- Pneumatic: 6-8 bar, consumption approx. 16NL/min Colour: RAL 7035 light grey Basic EC Directive 2006/42/EC in accordance with 2006/95/EG Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ----- Price of the above version ex works: on request! plus packaging and transport costs ----- (Technical information according to the manufacturer without guarantee!)

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Ljdpfx Aisxnlavo Hsrr

Condition: excellent (used), Optimizing cross-cut system GreCon type 2004 with infeed cross conveyor with outfeed conveyor with 4 ejectors with chain bed Technical specification: Max. width of workpieces: 250 mm Max. Thickness of workpieces: 80 mm Diameter of saw blade: 450 mm Cutting speed: 90 m/sec. Saw motor: 5,5 kW Control saw shaft: pneumatic Drive chain: servo motor Min. working width: 40 mm Min. input length: 500 mm Net weight: approx. 1.800 kg was overhauled and then no longer used Lredpon Hwl Asfx Ai Hsr Location: Austria, near Ried im Innkreis

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2920x980x1450 mm Ljdpjvz Hzrefx Ai Horr Weight 1500 kg Total power requirement 11,5 kw

Condition: used, Year of construction: 2020, saw blade diameter: 600 mm, cutting height (max.): 200 mm, total length: 8,000 mm, total width: 2,000 mm, Push-feed crosscut saw, equipped with a 4-meter pusher, cutting height: 30 to 200 mm, cutting width: 300 to 580 mm, pusher capacity: 350 kg. Lrjdpfx Aisyzrb Ao Her

Condition: like new (used), Year of construction: 2018, operating hours: 800 h, functionality: fully functional, The machine is in like-new condition and has only 800 operating hours. CURSAL TRV 1200 E optimizing saw Year of manufacture: 2018 Saw blade diameter: 500 mm Maximum cutting height: 90 mm Maximum cutting width: 250 mm Ledpfozlbizox Ai Hsrr Adjustable feed rate, max. 195 m/min Saw motor power: 7.09 kW Infeed table length: 3000 mm – belt-driven feed Outfeed table length: 5000 mm – 3 ejectors/sorters Machine in very good technical condition – lightly used Full optimization – industrial computer/controller allowing programming of up to 128 independent work programs, supporting up to 16 width classes and 8 wood quality classes.

Condition: excellent (used), functionality: fully functional, Grecon Dimter Opticut S50 Optimizer Maximum material input length: 5000 mm Wood width min/max: 20-300 mm Wood thickness min/max: 10-100 mm Capability to cut bundles Defect cutting Lsdpfx Aiozaug Ro Hjrr CE certified

Condition: used, Year of construction: 1991, machine/vehicle number: DS11, functionality: fully functional, power: 9 kW (12.24 HP), saw blade diameter: 370 mm, Equipment: saw blade guard, Manufacturer: Bäuerle Type: DS11 Year of manufacture: 1991 Power: 2 x 4.5 kW Lrodpfx Aey Tphksi Hor Saw blade diameter: 370 mm Length measuring system (automatic): Shortest dimension: 225 mm Longest dimension: approx. 1900 mm

Condition: excellent (used), Year of construction: 1994, Automatic defect cross-cut system Wood width max. 260 mm Ljdpfx Aekv Untsi Hjrr Wood height max. 100 mm Saw 7.5 kW Feed 6,9 kW worked 1995 - 2012 approx. 4 hours/day

Condition: used, functionality: fully functional, machine/vehicle number: SBR-250, For sale: OSAMA SBR-250 glue roller The machine is fully operational and in very good condition. Ideal for gluing strips, sheets, panels, etc. Technical specifications: Working width: 230 mm Working height: 0 - 100 mm Applicator roller diameter: Ø 150 mm Feed speed: 28 m/min Motor power: 0.18 kW Working surface height: 790 mm Machine dimensions (width/length/height): 700 x 500 x 750 mm Machine base height: 1300 mm Net weight: 90 kg Lrjdpjx Eyxqsfx Ai Hjr Available for inspection at Sitańcu 127, 22-400 Zamość You are welcome to view the machine