Used Optiflex 2 for sale (77,730)

Condition: used, Year of construction: 2020, Becker BZ-2 Atomic – Packaging System - 2 identical, mirror-inverted packaging lines available - Without cutting machine - Year of manufacture: 2020 In this system, the cardboard is first trimmed at the front to remove any potential transportation damage. After edge trimming, a side trim of at least 30 mm is performed on both sides. If necessary, corners are also cut from the cardboard, depending on the FEFCO type. Finally, the cardboard is creased along the fold lines and conveyed out of the machine. Waste generated during the process is transported out of the machine via a waste conveyor belt located underneath. At the machine’s discharge end, a conveyor belt removes the waste into a container. If the edge trim is too long, it must be cut inside the system to ensure trouble-free removal from the machine. The cut blanks and products are conveyed to the folding table where cartons are erected and filled. In the Box Closing Unit, the cartons are closed, labeled, and discharged from the system. Machine components (see diagram): (1) Buffer Table | (2) Conveyor Pack System | (3) Folding Table FT30 | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) Folding Table FT30 | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor Technical Data: - Sound pressure level: < 70 dB(A) - Operating voltage: 400 V / 50 Hz - Rated current: 47 A - Main fuse: 63 A - Connected load: 32.5 kW - Control voltage: 24 V - Compressed air supply: 6 bar - Air consumption: 10 l/min Codpfx Aeygipmsbpsgn - Machine dimensions (W x H x D): 21,260 x 4,000 x 18,030 mm

Condition: used, Year of construction: 2014, machine/vehicle number: CA76, Technical Specifications & Performance Data The Robino & Galandrino Fenix 2 is a dedicated capsuling machine engineered for precise capsule application on bottles within a used bottling line context. Built with industrial packaging reliability in mind, this unit integrates smoothly into beverage production environments and second hand bottling equipment upgrades. Manufactured by Robino & Galandrino, it leverages the brand’s engineering for consistent, repeatable results in capsule application. Manufacturer: Robino & Galandrino Model: Fenix 2 Year: 2014 Machine category: Capsuling machine Cgodpfx Asyhbi Isbpen Schema/code: FEX750 Electrical supply: 400 V, 3-phase Frequency: 50 Hz Nominal current: 6.5 A Typical application: Capsule application on bottles in beverage production lines Advanced Automation & Control Systems The Fenix 2 supports straightforward integration with modern line controls. Its 400 V 3-phase, 50 Hz electrical configuration is standard across European bottling equipment, simplifying installation alongside PLC/HMI-managed production lines. Designed for repeatability and operator efficiency, the machine supports clear operational states, standard interlocks, and controlled application parameters that help maintain consistent capsule quality. Production Line Integration Capabilities This capsuling machine is intended for inline operation as part of an industrial packaging system. It interfaces effectively with upstream and downstream modules such as corking/capping stations, labeling machines, and conveyors. The machine’s robust frame and standardized electrical architecture allow integration into a used bottling line or a mixed-manufacturer production line for beverages. It is suitable for configurations handling glass bottles commonly found in wine and premium beverage packaging. Machine Condition & Maintenance History As a second hand, 2014-manufactured unit, the Fenix 2 offers a solid balance between modern engineering and proven field reliability. It suits facilities seeking dependable capsuling performance within an established beverage production process or upgrading an existing used bottling line. Maintenance routines typically include capsule feed verification, head alignment checks, and inspection of wear parts to preserve application accuracy and throughput. Operational Performance & Versatility The Fenix series is recognized for stability in capsule application on bottles used in wine and premium beverage packaging. It is designed for precise placement and consistent shrink/application characteristics, supporting high-quality presentation standards demanded by beverage production. The machine is compatible with standard conveyor handling solutions for glass containers and is adaptable to different line layouts and speeds determined by upstream/downstream equipment. Installation Requirements & Site Preparation Installation requires a stable production floor, 400 V 3-phase 50 Hz electrical service, and alignment with existing conveyor and line control systems. The machine should be positioned to allow safe operator access for loading capsules, adjustments, and routine ...

Condition: used, functionality: fully functional, power: 51 kW (69.34 HP), fuel type: diesel, empty load weight: 8,400 kg, Year of construction: 2019, operating hours: 1,643 h, drive type: Diesel, Mini excavator Condition: Ready for operation and fully functional Technical condition: Very good Description: Crawler excavator TAKEUCHI TB 290-2 – - KNICKER – - Year 2019 – - 1,643 operating hours – - hydraulic quick coupler – - MARTIN POWERTILT – - 3 digging buckets 30cm + 60cm + 90cm – - 1 ditch-cleaning bucket 150cm – - 4-cylinder Yanmar TURBO diesel engine 51.6 kW (70 HP) – - AIR CONDITIONING – - rearview camera – - refueling pump – - long reach arm – - excavator in very good condition – - rubber tracks approx. 80% – - Inspection and test digging possible on site – - Affordable delivery options! Cgedpfx Ajyfkzuobpen Quick coupler, buckets, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cab, air conditioning, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 1995, Hydraulic Press Brake Fab. MENGELE Type: H 80-2 Year: 1995 Technical Data Make: GWF-Mengele Cgjdpfoyhc Hujx Abpsn Type: H 80-2 Year of manufacture: 1995 Pressing force: 80 t Bending length: 2,550 mm Frame gap: 2,060 mm Table width: 180 mm Throat depth: 250 mm Stroke: 200 mm Oil capacity: approx. 250 L Operating pressure: 235 bar Dimensions: approx. L 3.85 x W 2.20 x H 2.70 m Weight: approx. 6.2 t Equipment • Controlled axes: Y1, Y2, X, R, Z1, Z2 • Cybelec DNC 800 CNC control • Amada tool clamping system • Automatic upper and lower tool clamping • CNC crowning • CNC die shifting • Support arms • Upper tool, straight, R 0.8 mm, L = 2,350 mm • Lower tool V8/V12, L = 2,350 mm • Operating manual All details without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2017, Dimensions: 2.4 x 2 x 2 m Drive power: 2 x 18.5 kW Number of knives: 2 x 72 Rotor diameter: approx. 354 mm Cgodpfx Aexvzzxjbpon Rotor length: 1,000 mm Screen size: 10 mm Weima shredder type HWN-2-1000 for the reduction of wood and similar materials such as plastics or cardboard. The machine stands out for its robust construction, large feed hopper, and two powerful rotors for continuous material intake. Optional with new knives at an additional cost.

Condition: used, Bore: 40 mm Cutting circle (ø): 125 mm Length: 240 mm Cgjdswma T Rjpfx Abpsn Material: aluminium Blades: strip planer blades Z2

Condition: used, Available: No. 1 and No. 2 Cgodpfxet Snzwo Abpen Used control cabinet from a Weinig Uniplan model, suitable as a spare parts donor or for rebuilding a control cabinet with operator panel.

Condition: used, Working width: 230 mm Working height: 120 mm Counter support: Yes Jointer: Yes Short piece package: Yes Spindle arrangement: Bottom (7.5 kW) – Top (7.5 kW) Spindle speed: 7,200 rpm Spindles: 2 Spindle diameter: 50 mm Codpfx Abot Rmbmepjgn Feed: 3 kW // max. 36 m/min Hydro finish planing machine Weinig Uniplan 23 for double-sided surface finishing, as an alternative to sanding (e.g. in window manufacturing), with high-performance spindles. - Very good original condition

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 35 h, functionality: fully functional, machine/vehicle number: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head The machine is sold with one driven circular knife and one punching tool. • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function Cgsdpfxjfnlkwe Abpon • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool Cjdpfx Absif Ek Rjpogn • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Cgodpfxewgc I Rj Abpjn Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: new, The RA 2 Tube End Finishing Machine is an essential tool for every workshop, designed to simplify the assembly and welding of tubes at a precise 90° angle. This robust device caters to various tube diameters while allowing for horizontal and vertical operation, making it versatile for both dual and corner unions. With its capability to handle tubes with wall thicknesses of up to 5 mm, from steel to non-ferrous metals, the RA 2 ensures quick and efficient machining. An eccentric shaft guarantees minimal effort during operation, enhancing productivity. The machine comes standard with an operator manual to facilitate setup and use. For your tube end finishing needs and additional inquiries, you can request a quote today and elevate your performance with KNUTH equipment. Cjdpswhkf Hjfx Abpogn

Condition: used, empty load weight: 4,140 kg, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2010, suspension: air, tire size: 235/75R17,5 143/141J, color: other, gearing type: other, front tire size: 235/75R17,5 143/141J, rear tire size: 235/75R17,5 143/141J, driver cabin: other, emission class: none, Equipment: ABS, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Codjyg Drpspfx Abpegn

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 3,080 h, load capacity: 4,500 kg, lifting height: 6,050 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork length: 1,200 mm, empty load weight: 7,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,700 mm, LPG forklift Load center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: normal Front tire type: Superelastic Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire condition: 0 - 20% Description: Thorough cleaning, new inspection with oil and filter change, new set of 6 black tires, overhaul according to FEM incl. approval. Csdpfovcf Rnsx Abpsgn Side shifter, 3rd valve, front work lights, full free lift, twin tires,

Condition: new, Brand new, never used!!! Year of manufacture: 2021 Axes: 6 Max reach: 2701 mm Rated load: 210 kg Max load: ~270 kg Net weight: 1107 kg Controller: KRC4 Pendant: KUKA SmartPad Model: KUKA KR 210 R2700-2 FLR (QUANTEC-2 Series). Cgsdpfsww Utasx Abpjn

Condition: new, Year of manufacture: 2021 Axes: 6 Max reach: 2701 mm Rated payload: 210 kg Max payload: ~270 kg Dead weight: 1107 kg Controller: KRC4 Teach pendant: KUKA SmartPad Cgodpsxnbafjfx Abpen Model: KUKA KR 210 R2700-2 FLR (QUANTEC-2 Series) Serial number: 1077132.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2367, total width: 1,235 mm, total length: 2,840 mm, total height: 1,660 mm, input current: 230 A, type of input current: DC, table width: 360 mm, table length: 450 mm, overall weight: 450 kg, operating speed: 1,000 mm/s, input frequency: 50 Hz, Tajima TFMX II C1206 Cgedpfeygqu Dsx Abpsn

Condition: new, Year of construction: 2015, functionality: fully functional, Dimensions: 1,500 x 600 mm Csdpsyg Ed Hsfx Abpsgn Passage width x height: 1,300 x 300 mm Working width: 1,000 mm With spacer frame and control electronics 650/2 S-2 Year of manufacture: 2015 – still unused and in original packaging

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, directional control valve -Solenoid valve -Type: MEH-5/2-1/8-B -Series: V402 -PN: 2.5-8 bar Codob A H Hpepfx Abpogn -Number: 5 valves available -Price: per piece -Weight: 0.3 kg

Condition: excellent (used), Catalogue number 7840 TECHNICAL DATA - max working width: 630 mm - max working height: 110 mm - 2 units: 1) grooved rubber calibration roller 2) grooved rubber calibration roller + pad + metal roller - from above: - metal feed roller, sliding - unit - metal sliding roller - unit - metal sliding roller - from below: - 2 metal sliding rollers - feed belt - 2 metal sliding rollers - pneumatic belt oscillation - 2 feed speed options - motor: 2×7.5 kW - electric table lift - working pressure: 6-8 bar - extraction connection diameter: 2x160 mm - overall dimensions (L/W/H): 1650x1060x1970 mm - weight: 972 kg Cgedjydb H Sspfx Abpen ADVANTAGES – Polish production – 2 working units – Unpainted – Very good condition – Used sander Net price: 21,900 PLN Net price: 5,200 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Units: Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg Cgsdpsxwyhtjfx Abpen – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Condition: used, Year of construction: 2001, Heidelberg Quickmaster 46-2 Cgsdpfoygubnsx Abpsn Format: 46 x 34 cm Available at short notice

Condition: new, The 2 T Workshop Press is a versatile Manual Workshop Press that excels in driving in and out arbors, bushings, spindles, and pins, as well as keyway broaching. This compact machine is characterized by its heavy one-piece casting design, offering stability and reliability for a wide range of applications in mechanics and repair shops. With a press force of 10 kN and a throat depth of 145 mm, it is particularly suited for press-fitting and pulling bearings, aligning, and bending tasks. The simple functionality of this press, combined with the included operator manual, makes it an essential tool for any workshop. As a robust offering from KNUTH, the 2 T Workshop Press stands ready for your pressing needs, allowing you to handle tasks with efficiency. Don't hesitate to order online and enhance your toolkit with this reliable Manual Workshop Press today. Cgsdpfxju E I E Ro Abpen

Condition: used, Year of construction: 2021, HAAS MINIMILL 2 Year: 2021 Table size: 1016 mm x 356 mm X-axis travel: 508 mm Y-axis travel: 406 mm Z-axis travel: 356 mm Spindle: SK40 Spindle speed: 0-6000 rpm 2x Renishaw probes Tool changer: 20 tools Approximate weight: 2313 kg Cjdsyaqtaepfx Abpegn

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2023, loading space length: 9,395 mm, total width: 2,480 mm, Year of construction: 2023, Equipment: ABS, KRONE 2-axle swap body, type: MAXI AZW 18 eL3B7, built in February 2023 > Offer subject to change and prior sale > Gross vehicle weight 18,000 kg > Technically ready for use with normal signs of wear, as shown in the pictures > Body / chassis: RAL color: 9005 / black > For BDF-7.45 bodies with a parking height of 1,020 to 1,320 mm > Unladen ride height: 1,080 mm Cedpfxjyhmr Ij Abpogn > Tires: 4-ply: 445/45 R19.5? Good condition > Axles: BPW > Brake system: EBS 4S/3M > Drawbar: length-adjustable (12 x 50 mm) from 1,800 to 2,400 mm with towing eye / 40 mm > MOT + SP current / NEW > Air connections: RED / YELLOW > Electrical connections: ABS and 1 x 15-pin > Additional galvanized bumper at the rear > Available immediately and multiple units available > Price ex location, D-59269 Beckum: €14,650.00 net