Used Optiflex 2 for sale (77,943)

Condition: used, Year of construction: 2022, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: GL61180KC, The 3E shredder is currently still in use. It will soon be replaced with a more powerful machine. Shaft length: 1800mm Chedoz Rmt Uspfx Anued 2 x 90kW motors The sale of this machine includes 1 new gearbox and 2 used gearboxes. Also included are 1 new motor and 2 used motors. For more information, please visit the 3E Machinery website, where we purchased this machine. This shredder has always been used for shredding car tires.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 3,342 h, load capacity: 2,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 43 kW (58.46 HP), empty load weight: 5,000 kg, drive type: Diesel, construction width: 1,800 mm, Telescopic forklift, rigid frame Mast type: Telescopic Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 0 - 20% Rear tire type: Solid rubber Rear tire condition: 0 - 20% Description: Manitou MT620 – 6m reach – 2-ton lifting capacity – year of manufacture 2009 – 3342 operating hours – mechanical quick coupler – 3-cylinder Perkins diesel engine, 43kW – 4-wheel steering – 4-wheel drive – 3 steering modes – cab – heater – lighting system – auxiliary hydraulics to the fork carriage, 3rd valve – with used pallet forks – front tires 20% – rear tires 20% – new bucket available at an extra cost – overall height: 1.92m – width: 1.80m – weight: approx. 5 tons – good condition – all mechanical – very maneuverable Chodps Ah Nlgjfx Anued 3rd valve, heater, Cab – heater – lighting system

Condition: good (used), Year of construction: 2005, overall weight: 6,000 kg, total height: 310 mm, total length: 3,985 mm, total width: 2,010 mm, Floorplate Length: 3985mm Floorplate Width: 2010mm Height: 310mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Chjdpfxs Ahg Szs Anujd Weight a plate approx.: 6000kg Number of matching pieces: 2 Length: 3985mm Width: 2010mm Height: 310mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2015, Industrial robot Manufacturer: Kuka Type: KR16-2 Year of manufacture: 2014/2015 Reach: 1611 mm Weight: 235 kg Payload: 16 kg Kuka KRC4 controller Chjdpfxji Ezwbs Anuod Year of manufacture: 2015 Weight: 145 kg Software version: V8.3.40 Kuka touch panel Kuka connection cables 41126ä

Condition: good (used), Year of construction: 2006, Industrial robot Manufacturer: Kuka Type: KR360L240-2 F Foundry Year of manufacture: 2006 Reach: 3326 mm Payload: 240 kg Weight: 2375 kg Kuka controller KRC2ed05 Year of manufacture: 2006 Weight: 208 kg Software version: V5.6.11 Csdjr H H Diopfx Anuohd Operating system: WinXP Kuka teach pendant KCP2ed05 Kuka connecting cables 41126ä

Condition: new, Year of construction: 2022, New robot in original packaging Chjdpfxozl Tlbs Anuod

Year of construction: 2000, condition: excellent (used), functionality: fully functional, • Motor power: 4 kW • Power supply: 3 x 400 V / 50 Hz • Grinding chamber opening: 170 x 330 mm • Rotor speed: 200 rpm • Number of rotor blades: 15 pieces • Number of stator blades: 2 pieces • Throughput: approx. 40–80 kg/h Low-speed grinder New blades!!! Chedo Ah Sppjpfx Anued Two units available. Price: 1700 EUR per unit. 10% discount when purchasing two units!!!

Condition: ready for operation (used), Grundig VAR56E, model 0.883.150-0, control board VAR56E, IN0853722, AES 2, serial number 2019031. Used, in good condition, 100% functional. Scope of delivery as shown in the photos. Csdpo Ahvgwofx Anuohd

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 3,500 kg, fuel type: electric, – Year of manufacture: 2015 – DTR, CE – Capacity up to 20 m³/h TECHNICAL PARAMETERS: – Width of feeder inlet: 500 mm – Height of feeder inlet: 180 mm – Diameter of knife shaft: 450 mm – Width of shaft: 515 mm – Two knives – Knife length: 515 mm – Toothed draw roller at the bottom Chsdpo Ah Eanefx Anujd – Power of motor for the bottom toothed draw roller: 2.2 kW – Toothed draw roller at the top – Power of motor for the top draw roller: 2.2 kW – (Length / width) of the feeding conveyor belt: 5000 x 520 mm – (Length / width) of the discharge conveyor belt: 10500 x 220 mm – Power of motor for the discharge conveyor belt: 3 kW – Belt feed forward / backward Transverse chain feeder / buffer for the shredder: – Overall length: 10600 mm – Width of feeder: 1750 mm – Distance between outermost chains: 1650 mm – Distance between chains: 550 mm – Height of feeder from base: 1500 mm – Motor power: 4 kW – 4 chains Transport dimensions: – Length: ~1300 cm – Width: 240 cm – Height: 225 cm – Weight: ~3500 kg

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Chedovvkfwjpfx Anuod

Year of construction: 1985, condition: repair required (used), Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools Codpfxoi Huvhs Anuohd -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Condition: used, machine/vehicle number: 1484.04.01, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Precision coordinate grinding machine Machine weight: approx. 4.5 t Travel and working area X-axis travel: 700 mm Y-axis travel: 400 mm Workpiece height: 620 mm Internal grinding diameter: 250 mm Axial movement of the grinding spindle: 115 mm Chsdpfx As Aa Aqaonued Work table Table size: 1,000 × 630 mm Feed and accuracy Feed rate: 0.5–63 mm/min Stroke: 5–100 mm Resolution: 0.001 mm Grinding spindles High-speed spindle: 30,000–60,000 RPM Additional spindle: 12,000–30,000 RPM Planetary spindle speed: 5–250 RPM Slide head Slide travel: ±50 mm Control and operation Digital control: ARKURITE VRO 300 Interface: RS 232 Speed adjustment: electronic, stepless Operating modes: manual and NC operation Performance data Total power consumption: 6 kW Dimensions Space requirement: approx. 2.375 × 2.470 × 2.560 m EQUIPMENT High-speed spindle Second high-speed additional spindle Slide head Feed rate display Digital speed display Electronic stepless speed adjustment ARKURITE VRO 300 digital control RS-232 interface Switch for manual and NC operation Safety emergency stop

Condition: used, functionality: fully functional, power: 11 kW (14.96 HP), fuel type: diesel, empty load weight: 1,860 kg, Year of construction: 2012, operating hours: 2,810 h, Equipment: rubber tracks, Mini excavator HITACHI ZX17U-2 Year of manufacture: 2012 According to the meter, 2,810 operating hours 1,860 KG 11 KW - POWERTILT - Mechanical quick coupler MS 01 - Deep-digging bucket - Grading bucket - Protective canopy (lightweight and quickly removable) - Hydraulic adjustable undercarriage - Immediately ready for operation - Very good tracks - Minimal play on pins and bushings Selling price: €14,900 net Cedpfx Ao Adr Enjnushd Affordable delivery also possible!

Condition: used, functionality: fully functional, Maweg SE 2 belt grinder Codoz Sxtijpfx Anuohd Working width: 200 mm Working height: up to 180 mm Upper and lower grinding heads Power of grinding heads: 2 x 4 kW Electrically adjustable grinding head height

Condition: used, Profiling milling machine with 2 profiling spindles, hardware milling unit, and sanding unit Cjdpfx Anjz S Nrpeujhd Technical data and equipment 1. Power supply and compressed air * Electrical connection: 3-phase, 380 V, 50 Hz * Compressed air requirement: approx. 13 NL/min * Operating pressure: 8 bar * Compressed air quality: according to Pneurop 6611 2. Profiling spindle 1 * Spindle arrangement: right * Drive power: 11 kW * Speed: 7,000 RPM * Direction of rotation: clockwise and counterclockwise * Spindle diameter: 40 mm * Effective length: 252 mm * Max. tool diameter: 230 mm Vertical positioning: * U-shaped movement of the profiling spindle * Pneumatic cylinder with 120 mm stroke * 2 tool positions * Position detection via limit switches Horizontal positioning: * Pneumatic forward and backward movement * Position detection via limit switches * Automatic plunge function with adjustable plunge speed for tear-free milling * Protective and extraction hood with extraction nozzle Ø 140 mm 3. Profiling spindle 2 * Spindle arrangement: right * Drive power: 11 kW * Speed: 7,000 RPM * Direction of rotation: counterclockwise * Spindle diameter: 50 mm * Effective length: 272 mm * Max. tool diameter: 230 mm Vertical positioning: * U-shaped movement of the profiling spindle * Pneumatic cylinder with 90 mm stroke * 3 tool positions * Position detection via limit switches Horizontal positioning: * Pneumatic forward and backward movement * Position detection via limit switches * Protective and extraction hood with extraction nozzle Ø 140 mm 4. Hardware milling unit EG * Spindle arrangement: right * Drive: Three-phase motor, 3 kW * Speed: 6,000 RPM * Spindle diameter: 30 mm * Effective length: 47 mm Positioning: * Vertical positioning: not available * Horizontal positioning: pneumatic forward and backward movement * Position detection via limit switch (rear position) * Protective and extraction hood with extraction nozzle Ø 80 mm 5. Stop system * 1. Stop in front of profiling spindle 1: * Manual chip removal * Quick adjustment via parallelogram guide * 2. Stop between profiling spindle 1 and 2: * Pneumatically adjustable chip removal * 3. Stop behind profiling spindle 2: * Fixed stop 6. Sanding unit * Sanding unit with automatic infeed and outfeed 7. Feed device * Roller spacing (center to center): 130 mm * Roller diameter: 110 mm * Roller width: 50 mm * Feed device can be swiveled away * Pneumatic control of the working stroke 8. Support rail for edge milling * Rail length: approx. 3,000 mm * Adjustment range forward: approx. 100–600 mm

Condition: good (used), Year of construction: 2011, Industrial robot Manufacturer: Kuka Type: KR30L16-2 (SafeRobot) Year of manufacture: 2011 Reach: 3102 mm Weight: 700 kg Payload: 16 kg Kuka controller KRC2ed05 (SafeRobot) Weight 185 kg Processor 2 GHz Operating system: WinXP Software version: V5.6.6 Csdpfx Aen Uv S Aenushd Kuka teach pendant KCP2 Kuka connecting cables 7m / 15m 41126

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, year of last overhaul: 2024, compressed air connection: 10 bar, We offer 2 HUSKY machines. Available technical specifications for the HUSKY 2 machine, produced on 18/12/24, 23.5 GR, as per the listed data: Model: GL 6L 300 PET Type: P 100/120 E100 Series: 3.0 TONNE Hydraulic pressure: 180 BAR Weight: 57,800 kg Number: 14065 Csdpoy Tpfijfx Anujhd Date: 98/02/04 Encore Husky Package 20 Serial Number: 54360P Code: S2PP-N01 Reference Number: 726698 Year: 3123-64 Additional Information: Hot Runner and Mold Weight: 2315 gr (72) CAV MOLD 48 gr 2 lit. 28 gr 0.5 lit. HOT RUNNER 48 CAV MAAI 48 CAV MAAI 48 CAV KOBOTS / ROBOTS 48 – 1.4 – 27 gr 28 gr Available technical specifications for the HUSKY 1 machine, produced on 29/11/24, 10.5 GR, as per the listed data: HUSKY 1 type P100/120 E100 14/04/1998 SERIES 300 TONNER HYD. PRESSURE: 180 BAR WEIGHT: 21,600 kg Material / Specifications NOVTCO GL300 PET P 100/120 E100 3L Dates DATE: 14/3/14 DATE: 98/04/14 Details AW 5830-A01 72698 E. 3293-111 Remarks ENCORE HUSKY EXTENSION (2)T AP PERIOD 543588 HOT RUNNER AND MOLD 1QTS 92 (F2) WATER CAVITY The machines come with many spare parts and molds, as well as all auxiliary production machines, such as a plastic preform production or PET packaging line: The resin is stored in hoppers. It is dried using a dryer/dehumidifier. It is transferred to the Husky machine via vacuum pumps. The injection molding machine produces the preforms. The water circuit cools the molds and robots. There are filters, metal detectors, and conveyors for material and scrap management. The two lines are almost identical, with separate equipment for each line (No1 and No2). Code Description Function HUSKY Husky Machine Injection molding machine DRYER Dryer Drying of plastic resin FAN Fan Air circulation / cooling CONVEYING RESIN TO HOPPER Resin Transfer Transfer of raw material to hopper VACUUM PUMP Vacuum Pump Creating a vacuum for material transfer WATER PUMP Water Pump Circulation of cooling water DEHUMIDIFIER Dehumidifier Removal of moisture from air/resin RESIN HOPPER Resin Hopper Storage and feeding of material COMPRESSOR Compressor Supply of compressed air AIR TANK Air Tank Storage of compressed air WATER FILTER Water Filter Filtering of cooling circuit METAL DETECTOR Metal Detector Checking material for metal objects PLASTIC SYSTEM CONVEYOR Plastic System Conveyor Transfer of product/material PREFORM BREAKER Preform Breaker Breaking of rejected preforms STRAP Strapping Machine Binding of packaging OVERHEAD CRANE Overhead Crane Lifting loads

Condition: excellent (used), CATALOGUE NUMBER 7773 TECHNICAL SPECIFICATIONS - max. width of workpiece: 900mm - max. height of workpiece: 160mm – Top: - metal, sliding roller I unit – ribbed rubber roller for calibrating II unit – 2x metal roller for calibrating + shoe – Bottom: Cjdpoztw D Dsfx Anuohd - conveyor belt - pneumatic belt oscillation - electric table lifting - main motor: 15kW/11kW - feed motor: 1.5kW - working pressure: 6-8bar - diameter of extraction nozzle: 2x200mm - dimensions (L/W/H): 1850x1950x2040mm - weight: approx. 3000kg ADVANTAGES – Made in Italy – Calibrating grinder + shoe – Used grinder, very good condition Net price: 13900 PLN Net price: 3230 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 2016, functionality: fully functional, carrying capacity per cantilever arm: 650 kg, total length: 5,800 mm, total width: 3,180 mm, total height: 4,500 mm, load capacity per stand: 1,875 kg, number of shelf rows: 4, throat depth: 1,500 mm, Equipment: double-sided, FOR AN ABSOLUTELY UNBEATABLE "EVERYTHING MUST GO" PRICE!!!! 4 sturdy cantilever racks, galvanized – can be used on 2 sides or 1 side, for indoor and outdoor use. Ideal for steel construction, roofing, carpentry, timber construction companies, drywall construction, and trades businesses. Cedpfx Ansz Rm Hueujhd Due to the closure of our business, we are selling 4 high-quality cantilever racks. The racks are immediately available and offer an ideal solution for the organized and space-saving storage of wood, laths, timbers, boards, profiles, and other long materials. The stated price is the price per unit. If you purchase at least 2 units, the price is reduced by €150.00 including VAT per unit. Self-pickup only!!!!!

Condition: good (used), Year of construction: 2012, Industrial robot Manufacturer: Kuka Type: KR6-2 Year of manufacture: 2012 Operating hours: 2,500 Chsdpjiryylofx Anuod Reach: 1611 mm Weight: 235 kg Payload: 6 kg Controller: KRC4 Weight: 145 kg Software version: V8.2.19 Touch panel: Kuka KCP4 Connection cables 41126ä

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Pfaff Creative Icon 2” sewing machine Items for sale: 1x Pfaff Creative Icon 2 with the following accessories: Chsdpfxez Sx Ruj Anusd incl. additional embroidery module or embroidery unit incl. ‘Grand Endless Hoop’ fabric or embroidery material incl. embroidery hoop or embroidery accessories Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A video recording of a functional test will be made for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, mileage: 2,70,718 km, power: 300 kW (407.89 HP), first registration: 08/2013, number of seats: 52, gearing type: mechanical, emission class: euro5, color: white, Year of construction: 2013, Mercedes-Benz Tourismo M/2 / Evobus * Possibly from Bundeswehr stock! * First registered: 08/2013 * EURO 5 * Retarder Codpfs Ahdx Ujx Anujhd More information coming soon!

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-2_2, Our carton sealing machine, type VOGEL MH-FJ-2, is equipped with a side drive belt system. The machine automatically adjusts to the respective carton size within the specified range. Carton formats: Length 150 – ∞ mm Width 140 – 480 mm Height 120 – 480 mm Technical data: Length 1,150 mm Width 1,005 mm Codpfx Aj Ah E Iqonushd Weight 250 kg Operating voltage 220 V Air pressure 5 kg/cm² CE marking IMPORTANT: An air supply is required to operate the machine; this is not included in the delivery scope. Our carton sealer MH-FJ-2 is specifically designed for changing carton formats. Thanks to the pneumatic adjustment of height and width, a wide variety of carton sizes can be processed quickly and easily without manual intervention. The machine adapts immediately to different formats. Two side and two top conveyor belts transport your cartons safely through the sealer. The top flaps of the cartons must be folded down manually before they are fed into the machine. This machine is designed for adhesive tapes with a 76 mm core diameter and 50 mm width. We recommend using machine tapes with longer lengths per roll (compared to hand rolls), allowing you to work longer without having to change the tape. Both PP and PVC tapes as well as eco-friendly paper tapes can be used. The tape units can be easily removed for quick tape change. Additionally, this function can be used if you wish to seal cartons only on top (keyword: auto-bottom cartons). Of course, this machine is also CE marked. Please note that a compressed air connection on-site is required for operation! Accessories: For our VOGEL carton sealer range, we offer optional castors, infeed and outfeed tables, and roller conveyors.

Condition: good (used), MBO T500-2/4 folding module + T-500-2-X cross-folding knife unit Machine in very good condition, ready for production. From the original owner. This is a secondary (cross-folding) module for an MBO folding machine, complete with an additional knife-folding unit. Includes 4 folding cassettes and one cross-folding knife. Equipped with sound-dampening cassettes. Can be connected to virtually any MBO machine model or used as an add-on unit for other machinery. Mounted on casters for easy mobility. Independent control system. Chsdpfx Ansz S Uptouod

Condition: good (used), Year of construction: 2008, Industrial robot Manufacturer: Kuka Type: KR150-2 Swingarm Carbon Year of manufacture: 2008 Weight: 1267 kg Kuka controller KRC2ed05 Weight: 205 kg Processor: 2 GHz Language: WinXP Software version: V5.6.6 Kuka teach pendant KCP2ed05 Kuka connecting cables: 7 m / 15 m Chsdpjq N A Hpjfx Anuod Special design with a longer carbon upper arm. This allows axis 3 to swing through to the rear. Originally, it was a KR150-2 Series 2000 from 2008. 41126