Used Optiflex B for sale (39,290)

Condition: refurbished (used), overall weight: 11 kg, Technical specifications: Product number RA 0400 B 4ZI Engine power 11 kW Capacity 400 m3/h Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1100 rpm Weight 350 kg Dimensions [h x l x w] 1411 x 981 x 1410 mm The pump achieves a vacuum of 0.5 mbar, which is confirmed by our recorded video (5.8 to the power of minus 1 on the sensor indicates 0.58 mBar). Pedjzvrhpjpfx Abpjra The unit, after a major overhaul, operates like new. New seals, filters, and separators. Oil-lubricated vacuum pump, suction – a device used in technology for removing gases (creating a vacuum) in a closed space. Pumps are classified according to their operating principle into: volumetric, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with that pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), functionality: fully functional, Technical specifications: Product number: WV 1500 B 001 Year of manufacture: 2004 Capacity: 1500 m3/h Maximum vacuum: 0.09 mbar The booster pump must operate in conjunction with an oil pump with a capacity 2 to 3 times lower. Podpfx Abszvrgrepera The unit has undergone a major overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.09 mbar.

Condition: new, empty load weight: 4,650 kg, maximum load weight: 14,350 kg, overall weight: 19,000 kg, axle configuration: 2 axles, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, , with hydraulic tailgate, three-sided tipper, sideboards 600 mm high, galvanized, loading height approx. 1,080 mm, 4 x lashing eyes, each with a capacity of 5 tons, embedded in the floor, 8 x lashing eyes, each with a capacity of 3 tons, embedded in the floor, reinforced gearbox support winch with load and fast-running gear at the front, 435/50 R 19.5, chassis hot-dip galvanized and tipper body hot-dip galvanized or painted, surcharge for: aluminum ramps (approx. 3,500 mm long) and 2 folding supports at the rear, price: 1,900 euros, printing errors, errors and changes excepted, sample images, more details under: !, more details: ! Pedpfx Abszug Uhspsra

Condition: new, empty load weight: 4,460 kg, maximum load weight: 14,540 kg, overall weight: 19,000 kg, axle configuration: 2 axles, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, sideboards 600 mm high, galvanized, loading height approx. 1,080 mm, 4 x lashing eyes, each rated at 5 tons, embedded in the floor, 8 x lashing eyes, each rated at 3 tons, embedded in the floor, reinforced gearbox support winch with load and fast-running gear at the front, 435/50 R 19.5, chassis and tipper body hot-dip galvanized, surcharge for: aluminum ramps (approx. 3,500 mm long) and 2 folding supports at the rear, price: 1,900 euros, printing errors, errors and changes excepted, sample images, more data at: ! Prsdpfezug Ubex Abpja

Condition: reconditioned (used), functionality: fully functional, fuel: super 95, overall weight: 66 kg, KARCHER HD 1050 B COLD WATER PRESSURE WASHER This device features new accessories, including a pressure gun, stainless steel lance, steel braided hose, and adjustable nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. The highly efficient Honda GX 390 combustion engine ensures stable operation even during prolonged use. With operating parameters of 230 bar and 930 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Predpfx Aezvd H Robpoa Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power: Combustion Engine: Honda GX 390 Discharge capacity [l/h]: 930 Operating pressure [bar]: 230 Maximum pressure [bar]: 250 Weight [kg]: 66 Dimensions (L x W x H) (mm): 1044 x 549 x 662 Hose length [m]: 10 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: good (used), axle configuration: 2 axles, first registration: 03/2006, loading space length: 11,600 mm, loading space width: 2,510 mm, loading space height: 2,650 mm, total length: 12,100 mm, total width: 2,600 mm, total height: 4,050 mm, suspension: air, tire size: 425/65R22,5, wheelbase: 8,410 mm, color: other, Year of construction: 2006, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Remarks = Number of axles: 2, Payload: 21210 kg, Tare weight: 10790 kg, Gross vehicle weight: 32000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, ABS, EBS, Body construction year: 2006, Axle type: BPW, Tail lift, Tail lift design: Rear door, Tail lift manufacturer: Amtek, Tail lift material: Steel, Tail lift size: 255 x 190, Battery for ramp = Additional Information = General information Cab: Day cab Registration number: OJ-07-GS Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Tire size: 425/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 7 mm Axle 2: Steerable; Tire tread depth left: 17 mm; Tire tread depth right: 17 mm Weights Tare weight: 10,790 kg Payload: 21,210 kg GVW: 32,000 kg Functional Tail lift: Amtek, Rear door Height of loading platform: 125 cm Environment Emission class: Euro 0 Maintenance APK (Technical Inspection): valid until 03/2027 Condition Technical condition: good Optical condition: good Damage: none = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of construction and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged Pjdpfx Aszgbmpebpjra • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: new, power: 154 kW (209.38 HP), fuel type: diesel, brakes: retarder, color: white, gearing type: automatic, number of seats: 29, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, 2 x new Iveco Daily vehicles with COC certificate, available for immediate delivery, equipped with GSR 3 systems. 1 x in black Prodpfszxa I Asx Abpsa 1 x in white We are the representative of Ferqui in Germany. Ferqui is known for its high-quality fiberglass bodies. Ferqui has been using fiberglass since the late 1960s, making it one of the pioneers in this segment. The vehicles have a permissible total weight of 7200 kg and are therefore covered by the Iveco warranty. Iveco C70 chassis with automatic transmission and 210 hp Air-suspended rear axle, Telma auxiliary brake, LED headlights, auxiliary heater, driver's luxury seat with seat heating - Iveco Daily - 2 x touring buses on Iveco C70 chassis - Air-suspended rear axle - Telma - Length 8.59 meters, width 2.50 meters, height 3.1 meters - Fiberglass body - Framework construction made of galvanized steel - Front air conditioning - Webasto air conditioning in the passenger compartment RT 190 = 19 kW (thus dual/AC) - Double glazing - Panoramic windshield - Electric front door with recessed entry - Entry height at the front, without lowering, maximum 300 mm - Rear emergency door - Total capacity for the touring bus: 29 (28+1+1) - USB ports at each row of seats in the touring bus - Luggage compartment on the left and right in the touring bus - Fresh air vents at each row of seats with service set - Convector heater - Iveco auxiliary heater with water and timer Touring bus has a 4.2 m3 luggage compartment - Rear luggage compartment - Spare wheel compartment - 2 side luggage compartments - Exterior color: white Price per unit: 169,990.00 Euro Net export possible.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Working area X: 3640 mm Working area Y: 1342 mm Part clearance: 180 mm 12 kW C-axis electrospindle, ISO30 mounting Drill bits for vertical drilling: 24 Drill bits for horizontal drilling X: 6 Drill bits for horizontal drilling Y: 4 Saw blade for grooving in the X direction 12-position revolver tool changer Work table with 6 rails with EPS automatic positioning of the rails, vacuum cups Chip conveyor belt 1 vacuum pump with a capacity of 90 m3/h Safety mats Prsdpfx Aozmff Nobpoa Approximate weight: 4000 kg. Includes 3 aggregates (for door milling, mortising, etc.), vacuum cups, and some Uniclamps. Only 1406 operating hours on the 4-axis electrospindle, and 831 hours on the drilling unit. Available from January 2027.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 140 bar, empty load weight: 110 kg, warranty duration: 6 months, KARCHER HDS 801 B PETROL HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. The highly efficient HONDA GX160 combustion engine ensures stable operation even during prolonged use. Prodpfx Abozu Nizepsa With operating parameters of 140 bar and 600 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Discharge capacity (l/h): 600 Operating pressure (bar/MPa): 140 / 14 Maximum water supply temperature (°C): 80 Fuel consumption (kg/h): 4.1 Engine type: GX 160 Engine manufacturer: HONDA Weight (kg): 1110 Dimensions (L x W x H) (mm): 1168 x 862 x 767 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: used, power capacity / kW volt / V ampere / A BBC Brown Boveri disc armature FD MC23AS R0006 B 0781 SERVO MOTOR Code: FD MC23AS R0006 B 0781 Psdpfx Asy S D Ayjbpera

Condition: used, volt / V ampere / A weight / kg Psdpey Surxofx Abpjra total power requirement / kW BELLHEIMER METALLWERK - gear motor Type: SK80 S/4 BRE10 SRTW No.: NM1008302361.00 Power: 0.55kW - 0.63kW Rotation: 1375 rpm - 1650 rpm IP55

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B/BP, used machine Psdpezqbmdjfx Abpsra Manufacturer: Tool-Temp Type: TT 138 B/BP Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: good (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1105, spindle bore: 48 mm, center height: 170 mm, total length: 1,800 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,500 kg, input voltage: 380 V, input frequency: 50 Hz, WEILER CONDOR B – Guide and Feed Spindle Lathe - Connection: 4 kW - Rated current: 9.5 A - Distance between centers: approx. 900 mm - Distance between centers above the bed: approx. 170 mm - Swing over bed: approx. 340 mm - Distance between centers above the carriage: approx. 90 mm - Swing over carriage: approx. 180 mm - Spindle bore: approx. 48 mm The machine is equipped with a tailstock, a Multifix tool holder, and a digital display from the manufacturer ACU-RITE. The machine comes from a training workshop; therefore, the guide and feed spindle are covered. Predpfx Ajztwwksbpoa FCA D-73235 Weilheim Teck – loaded onto a truck.

Condition: new, empty load weight: 4,460 kg, maximum load weight: 14,540 kg, overall weight: 19,000 kg, axle configuration: 2 axles, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, sideboards 600 mm high, galvanized, loading height approx. 1,080 mm, 4 x lashing eyes, each rated at 5 tons, embedded in the floor, 8 x lashing eyes, each rated at 3 tons, embedded in the floor, reinforced gearbox support winch with load and fast-running gear at the front, 435/50 R 19.5, chassis and tipper body hot-dip galvanized, surcharge for: aluminum ramps (approx. 3,500 mm long) and 2 folding supports at the rear, price: 1,900 euros, printing errors, errors and changes excepted, sample images, more data at: ! Prodpfeztnqzox Abpja

Condition: ready for operation (used), Fanuc A06B-6079-H207 / B-65162 servo amplifier, serial number: EA8801236, used, in good condition, 100% functional. Scope of delivery as shown in the photos. Pjdjzuigmopfx Abpsra

Condition: ready for operation (used), Siemens 6FC5357-0BA21-1AE1 NCU 572.2 Version: B, Serial No.: T-K32026206, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Prsdpfx Aboi Envxspsa

Condition: used, mileage: 3,07,824 km, power: 300 kW (407.89 HP), first registration: 07/2013, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 09/2026, color: white, gearing type: semi-automatic, emission class: euro5, Equipment: ABS, air conditioning, * Sun visor * ABS Pjdpjzwypkofx Abpjra * ASR * Radio * On-board computer * Cruise control * Air horns * Hill start assist * Electric windows * Electrically adjustable mirrors * Mirror heating * Central locking * Sunroof * Rear window * Driver's comfort seat * Seat heating * Longitudinal and transverse differential locks * AP axles * Steel bumper * Air dryer * Towing hitch * Foldable underbody protection * Digital tachograph * Exhaust behind the cab * Air intake on top * 16-speed * Suspension: leaf spring * Payload: 17740 * Parking brake: engine brake ----Superstructure: Liebherr concrete mixer HTM 904 L, capacity 9,000 liters, 500-liter water tank.----EEV Class 1 For sale to commercial businesses only. IN THE CASE OF EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase agreements, invoices, proforma invoices, orders, and sales discussions.

Condition: new, pressure 220 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 150 mm/sec work speed 10.0 mm/sec return speed 140 mm/sec work stroke 265 mm dayligth 480 mm table height 900 mm table width 110 mm oil volume 300 ltr. voltage 400 Volt total power requirement 18.5 kW weight 15000 kg range L-W-H 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC Product Video Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! ALUMINUM CAST REAR STOP COMPONENTS ! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. More quiet. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Maximum performance when it's really needed ! Main motor is only activated by the foot pedal ! No energy wasted in standby mode ! Controlled start-up process Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA-66T- graphics/touchscreen * 2D graphic touchscreen programming operation * 3D display in simulation and production * 17" high-resolution color TFT screen * Bending sequence calculation * Product programming and display in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - CNC electro-motorized backgauge (X-axis) * on ball screws * Travel: max. 750 mm * X-axis travel speed: 350 mm/s * with 2x CNC-controlled backgauge fingers - CNC electro-motorized height adjustment (R-axis) * Travel: max. 250 mm * R-axis travel speed: 300 mm/s - CNC electro-motorized table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with sliding system * easily and keylessly height-adjustable - FIESSLER freely movable double foot control - CE marking / Declaration of Conformity Pjdpfxeynnk Eo Abpera

Condition: new, Year of construction: 2026, New machine Year of manufacture: 2026 Equipment: Psdpozttnfjfx Abpera Base machine Additional cost for radius milling cutter unit with blowing device + extraction system Additional cost for surface milling cutter unit Additional cost for diamond tools, height = 55 mm, for jointing unit EVA/PUR glue tank with drain function instead of standard glue tank Collection table / pipe bridge Pre-carriage Location: Flörsheim Availability: Immediate

Condition: used, mileage: 1,64,720 km, power: 92 kW (125.09 HP), first registration: 05/2019, fuel type: diesel, empty load weight: 1,835 kg, maximum load weight: 1,205 kg, overall weight: 3,040 kg, tire size: 215/60 R17, axle configuration: 4x2, wheelbase: 3,498 mm, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space volume: 6 m³, loading space length: 2,937 mm, loading space width: 1,690 mm, loading space height: 1,387 mm, Equipment: ABS, air conditioning, cruise control, traction control, trailer coupling, Color: White, Fit-out solution: Shelves and storage compartments, Fit-out manufacturer: Sortimo, Fit-out for industry: Service and installation, Unladen weight: 1835 kg, Permissible total weight: 3040 kg, Load compartment (L W H): 2,937 mm x 1,690 mm x 1,387 mm, 1st axle: 215/60 R17, Seats: Fabric, Torsion bar suspension, 1 x airbag, Trailer coupling: ball type, Electronic stability program ESP, Anti-slip regulation ASR, Driver's seat: height-adjustable, Driver's armrest, Passenger bench seat, Radio, USB connection, Hands-free system Bluetooth, Rear-view camera, Multifunction steering wheel, Electric windows, Exterior mirrors: electric and heated, Immobilizer, Central locking, Load compartment floor: wood, Rear doors: 180° opening angle, Daytime running lights, Sortimo vehicle equipment: Shelf system on the left and right, The following work will be carried out before delivery: Oil change with filter and new MOT/emission test. Optionally available at an extra cost of €800.00 (net). 1-year used car guarantee Intec Premium Plus with deductible. For further questions, please contact Jan Furtak. Tel. Errors and changes excepted. Sale only to commercial customers. Errors and changes excepted. Sale only to commercial customers. Podpfx Abezwx U Sspera

Condition: ready for operation (used), Nilfisk Scrubber-Dryer Scrubtec R 253 B Combi Scrubber-Suction Machine Working width: 530 mm Suction width: 720 mm Tank volume: 70 l fresh water / 70 l dirty water Total weight: approx. 342 kg 0.6 kW You are welcome to visit us for an inspection. We can also arrange affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Psdpfx Abszw Dxvspora Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data and errors in the description of the article may occur and are subject to change.

Condition: used, empty load weight: 4,800 kg, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2011, next inspection (TÜV): 02/2027, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 800 mm, suspension: air, tire size: 385/65R22.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: en route / in transit, steel body, side tipping mechanism on the left, 2 axles, tandem, air suspension, ABS (anti-lock braking system), underrun protection, front support. Prodpfozna Saox Abpoa Body: Tandem 3-sided tipping trailer with side tipping mechanism on the left, 2 x 9-ton axles, drum brakes! All information is provided without guarantee as the trailer is currently en route! The trailer can be inspected at Robert-Bosch-Strasse 22, 72186 Empfingen! ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: ready for operation (used), Fanuc A06B-6087-H115 / B-65162 power supply module, serial number: EA7Y26836, used, in good condition, 100% functional, scope of delivery as shown in the photos. Psdpfx Aozt Uwuobpora

Condition: ready for operation (used), Year of construction: 1960, Available immediately ex works: Table drilling machine, Scharmann Type FB 125 b Year of manufacture 1960 Complete retrofit in 2020 Spindle 125 mm Metric 80 / SK 50 mounting Quill stroke 800 mm Table 1600 x 1200 mm Table traverse 2000 mm Installation height, spindle / table 1400 mm Table longitudinal travel 2500 mm Spindle speeds 5 – 740 rpm, 7.5 – 1100 rpm Podpfszwvmrjx Abpsra With Wohlhaupter machining: 5 – 74 rpm 3-axis Heidenhain digital display Vertical head Large Wohlhaupter turning head Various other accessories Weight 21 tons Price: Euro 7,500.00 + VAT, ex works

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Podpjx A Hggofx Abpera Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3