Used Optimum S 181 for sale (104)

Condition: as good as new (ex-display), Year of construction: 2025, GT 40 – The OPTIMUM Premium NC Grinding Machine with Siemens Touch Screen. • Electromagnetic clamping plate for securing the workpiece, featuring automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter-guides for high wear resistance and low friction • Grinding spindle equipped with premium precision bearings • The grinding wheel can be dressed directly on the machine using the dressing device • Digital position display • Machine base made from stable, torsion-resistant cast iron for maximum rigidity and stability • Guideways for longitudinal, cross, and vertical movements are backlash-free and self-centering, designed as V and flat ways • Precision ball screw drives • Guideways and feed screws with centralized lubrication • All flat guides are hand-scraped, guaranteeing the highest precision for all manual movements • Safety electronics with 24 V DC voltage • Large, decoupled handwheels on all three axes • Hydraulic lines compliant with DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all common steels • Swiveling control panel for greatly simplified operation Kwedpfsymduqox Abcew • Separate hydraulic unit with heat exchanger to prevent vibrations and thermal stress • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly reduces energy consumption and provides substantial cost savings Dimensions and Weights Length approx. 3600 mm Width/Depth approx. 2400 mm Height approx. 1900 mm Weight approx. 3600 kg Electrical Data Total connected load: 7.5 kW Supply voltage: 400 V Mains frequency: 50 Hz Surface Grinding Table Clamping area length: 400 mm Clamping area width: 800 mm Grinding Wheel(s) Outer diameter: 350 mm Width: 40 mm Bore: 127 mm Peripheral speed: 27 m/s Spindle Speed: 1450 rpm Run-out accuracy: 0.005 mm X-Axis Feed rate: 5 – 25 m/min Standard Features • Digital position display • Coolant system • Balancing arbor • Grinding wheel, grit 46 • Diamond dresser • Operating tools • Manual oil pump • LED lamp • Electromagnetic clamping plate • Demagnetization function Equipment • Electromagnetic clamping plate • Table enclosure with splash guard • Demagnetization device • Parallel dressing device ✔ • Coolant system 125 W • Working light: LED lamp • Leveling feet ✔

Condition: as good as new (ex-display), Year of construction: 2025, GT 30 - The OPTIMUM premium NC sanding machine with Siemens touch screen. - Electromagnetic clamping plate for fixing the workpiece with automatic demagnetization function - High-quality spindle with precision tapered roller bearings - Hardened and ground table guideways - Turcite-B coated counter guides for high wear resistance and low friction - Grinding spindle with high-quality precision bearings - Grinding wheel can be resharpened directly on the machine using a sharpening device - Digital position indicator - Machine base made of sturdy torsion-resistant cast iron for maximum rigidity and stability - Guideways for longitudinal, transverse and vertical movements are backlash-free and self-centring as V and flat tracks - Precision recirculating ball screws - Guideways and transport spindle with central lubrication - All flat guides are finely scraped and thus guarantee maximum precision of all manual movements - Safety electrics with 24 V DC voltage - Large decoupled handwheels in all three axes - Hydraulic lines according to DIN EN 853 - Sanding accuracy: 0.005 mm - Grain 46 corundum grinding wheel for all common steels - Swivel-mounted control panel makes work considerably easier - Separate hydraulic unit with heat exchanger, avoids vibrations and thermal stress - Two-channel safety electronics - Grinding table splash guard - EMC filter class - With IE3 motor - consumes considerably less energy, resulting in significant cost savings Dimensions and weights Length approx. 3200 mm Width/depth approx. 2200 mm Height approx. 2100 mm Weight approx. 3000 kg Electrical data Total connected load 6.5 kW Supply voltage 400 V Mains frequency 50 Hz Surface grinding table Ksdpfjymdtyex Abcjww Clamping surface length 300 mm Clamping surface width 600 mm Grinding wheel(s) Outer diameter 350 mm Width 40 mm Bore 127 mm Peripheral speed 27 m/s Spindle Speed 1450 min¯¹ Concentricity 0.005 mm X-axis Feed speed 5 - 25 m/min Scope of delivery Unit of measure: piece Packaging unit: 1 Digital position indicator Coolant device Balancing mandrel Grinding wheel grit 46 Diamond pin Operating tool Manual oil pump LED lamp Electromagnetic clamping plate Demagnetizing function Equipment Electromagnet clamping plate Splash guard table enclosure Automatic demagnetizing device Parallel dressing device ✔ Coolant device 125 W Work light LED lamp Alignment feet ✔

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Kjdpsvvi Aujfx Abcjww Storage location: Nattheim

Condition: excellent (used), Year of construction: 2013, Band saw, Semi-automatic saw, Metal saw, Metal band saw, Frame metal saw Toptech / Optimum GB 4240, Used machine Manufacturer: Toptech / Optimum Type: GB 4240 Year/month of manufacture: 2013/06 Inclusion dimensions: 2200 x 1100 x 2000 mm Electrical data: 400 V / 50 Hz / 4 kW Kwodpfx Aem Akwzsbcsw Tape size: 34 x 11 x 4320 mm Belt speed: 19-86 m/min - Hydraulic vise - Adjustable feed Material size: 400 x 400 mm

Condition: used, Year of construction: 2014, Technical details: turning diameter over bed: 356 mm turning diameter over support: 220 mm turning length: 1000 mm centre height: 180 mm centre distance: 1000 mm spindle bore of work spindle: 38 mm range of revolution per miute: 45 -1800 U/min longitudinal feeds:: 0,043 -0,653 steps 42 tailstock quill taper MT: MK3 tailstock quill adjustment:: 95 mm total power requirement: 4 kW Kodpfx Asw D Dcqsbcjww weight of the machine ca.: 0,85 t dimension machine xH: 1,92 x 0,8 x 1,49 inkl. Anzeigeneinheit m

Condition: good (used), Year of construction: 2017, operating hours: 60 h, functionality: fully functional, machine/vehicle number: 333840, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 510 mm, spindle mount: MK 3, quill travel distance: 120 mm, type of input current: three-phase, table width: 210 mm, input voltage: 400 V, table length: 750 mm, drilling capacity: 32 mm, distance table center to spindle nose: 275 mm, rotational speed (max.): 3,200 rpm, rotational speed (min.): 95 rpm, rapid traverse X-axis: 240 m/min, Equipment: documentation/manual, The milling machine is fully functional and can be tested. It is being sold due to the purchase of a larger model. Technical documentation is available. The milling machine has a robust base cabinet housing the coolant pump. The automatic table feed features: - Emergency stop function, no automatic restart - Infinitely variable speed control and rapid traverse Kwodpfx Abeyrib Tjcsw - Left/right feed direction - Overload protection and limit switches - Speed: 0 - 165 rpm - Rapid traverse: 240 rpm Three-axis position display, accuracy class 0.01 mm.

Condition: used, Technical Data: Travel X/Y/Z: 700 / 250 / 430 mm Kjdpfjyi E Udex Abcsww Upper slide travel: 630 mm Spindle speeds: 45 - 1660 rpm Spindle taper: SK 40 Control: conventional Table feed: 24 - 402 mm/min Milling head swivels: 360° Table size: 1120 x 260 mm Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (W x D x H), approx.: 1600 x 1700 x 1700 mm Weight, approx.: 1200 kg Equipment: - Digital readout - Machine lamp - Coolant device - Machine feet

Condition: used, Year of construction: 2017, Milling machine Optimium Optimil F 105 Kjdpfx Aboyphnyscoww

Condition: used, spindle taper 750 W // 400 V // 50 Hz Boring power 25 mm connected load MK 2 Kwjdpst Rmbyefx Abcow

Condition: used, Year of construction: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH Signs of use present • Hardened and ground Z-axis guideway • Spindle mount: Camlock DIN ISO 702-2 No. 8 • Precisely machined carriage • Handwheels with adjustable fine graduation 0.04 / 0.02 mm • All guides adjustable via gib strips • Shafts, gears, and main spindle running in oil bath • Compound slide adjustment range ± 90° • Guaranteed spindle nose runout accuracy better than 0.015 mm • Gear wheels move smoothly, hardened and ground, mounted with 2 adjustable precision tapered roller bearings • Clearly arranged selector levers for feed speed selection • Enclosed rapid-shift feed gearbox design • Gears and shafts hardened and ground, running in oil bath on precision bearings • Switches with lifecycle calculation, tested according to EN ISO 13849 • Bed carriage with reversible operation via shift spindle • Centralized lubrication on bed carriage • Leadscrew cover • Emergency stop pushbutton, motor protection switch, lockable main switch • Tailstock quill and handwheel with adjustable fine graduation 0.025 mm • Fast, simple, tool-free adjustment via clamping lever • Heavily ribbed prism bed, inductively hardened and precision-ground from cast iron • Coolant system with separate coolant tank, fill level indicator and oil separator; easy and complete draining and cleaning according to DIN • LED machine lamp in chip guard • Two gearbox stages • Spindle bore / bar capacity Ø 105 mm • Siemens Sinamics frequency converter / Safety Integrated • Drag chain for gentle routing of cables and hoses • Thread dial gauge scale adjustable • Quick-change toolholder SWH 7-C • 1 toolholder 32 x 150 Type D for 25 mm square tool bits • Digital position display DPA 21 • Glass scales Dimensions and Weight Length approx. 3450 mm Width/depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Range Centre height: 280 mm Centre distance: 1910 mm Swing over bed: 560 mm Swing in bed gap: 790 mm Ksdpfxsx Dzxao Abcjww Swing over cross slide: 355 mm Turning length in bed gap: 170 mm Bed width: 350 mm Speed range Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data Output power (motor): 7.5 kW Total power rating: 8.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant System Coolant pump capacity: 125 W Standards and Approvals Standard: DIN EN 55011 Tailstock Mount: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Max. toolholder seat height: 25 mm Spindle taper: Ø 113 (Taper 1:20) mm Metric thread pitches: 0.1–14 mm/rev Number of metric threads: 47 Imperial thread pitches: 112–2 TPI Number of imperial threads: 60 Diametral pitch: 4–112 DPI Number of diametral pitch threads: 50 Module threads: 0.1–7 mm/rev Number of module threads: 34 Compound slide travel: 130 mm Cross slide travel: 316 mm Bed carriage travel: 1710 mm Longitudinal feed range: 0.031–1.7 mm/rev Number of longitudinal feeds: 42 Face feed range: 0.014–0.784 mm/rev Number of face feeds: 42

Condition: used, Year of construction: 2023, Optimum Optiturn TX 5216V – used machine. - Machine bed made from heavily ribbed cast iron - One-piece steel machine base - High rigidity of the spindle head housing due to heavily ribbed 25GG cast iron - Precisely machined saddle - Shafts mounted on needle bearings, all components lubricated in oil bath - Bed guideways hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made from hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with lifecycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed shaft guard - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures extreme accuracy and durability - Due to the machine’s high cutting capacity, substantial material removal during rough machining is no problem - Energy chain ensures gentle routing of cables and hoses - Lockable chip guard moves with the saddle, featuring integrated position display and coolant hose, manually adjustable - No change gears required - Equipped with safety device to prevent simultaneous operation of thread cutting and feed mechanisms - Electronic feed shut-off for the Z-axis - Coolant system with separate coolant tank, fill level indicator and oil separator; easy, complete draining and cleaning per DIN - Electrical position shut-off with quadruple position stop - 3-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 type D for 25 mm square tools - Large spindle bore Dimensions and Weights - Length approx. 2925 mm - Width/depth approx. 1195 mm - Height approx. 1930 mm - Weight approx. 2470 kg Working Ranges - Centre height 260 mm - Centre distance 1600 mm - Swing over bed 520 mm - Swing over cross slide 324 mm - Bed width 350 mm Speed Range - Number of speed ranges: 2 x 3 steps - Spindle speed range: 12 – 1800 rpm Electrical Data - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Rated voltage: 400 V - Mains frequency: 50 Hz Coolant System - Coolant pump output: 60 W - Data type: Usage data Tailstock - Mount: MK 5 - Quill stroke: 180 mm - Quill diameter: 72 mm Spindle - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar pass diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Threading - Metric thread pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Inch thread pitch: 60 – 2 tpi - Number of inch threads: 55 - Diametral pitch: 120 – 4 DP - Number of diametral pitches: 55 - Module thread pitch: 0.25 – 7.5 mm x π - Number of module pitches: 55 Traverse Paths - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1400 mm Feed Ksdpfxjx Hdq To Abcoww - Longitudinal feed range: 0.05 – 1.5 mm/rev - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Year of construction: 2017, condition: ready for operation (used), Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement. Kwsdpfx Ajxyk Ucjbcsw

Year of construction: 2016, condition: ready for operation (used), A barely used surface grinding machine Optimum is available. Grinding width: 220mm, grinding length: 470mm, grinding height: 350mm, table dimensions X/Y: 210mm/450mm, max. table spindle center distance: 450mm, grinding wheel dimensions X/Y/Z: 200mm/13mm/31.75mm. Machine dimensions X/Y/Z: approx. 1200mm/1450mm/2000mm, weight: approx. 800kg. Dokumentation vorhanden. An on-site inspection is possible. Kwjdpfx Abjxx Udlscsw

Condition: new, turning diameter 360 mm turning length 1000 mm Kwodpjw U U Tmofx Abcew swing diameter over bed slide 360 mm centre height 180 mm turning speeds 70-2400 U/min total power requirement 2,2 kW weight of the machine ca. 680 kg dimensions of the machine ca. 2000x1500x900 mm

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm Ksdpfxjk Egrpe Abcjww - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm Kwsdpfsucgr Iex Abcsw - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, Year of construction: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm speeds 115 - 1750 U/min table surface area 1000 x 240 mm Kjdpfx Abetv Riajcsww tool taper ISO 40 total power requirement 4,5 kW weight of the machine ca. 820 kg dimensions of the machine ca. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user Scope of delivery: - Gear rim drill chuck 1 - 16 mm / B 18 - Arbor drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, disc milling cutter holder Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Vertical and horizontal drawbar - T-slot nuts - Drifter - Operating tool

Condition: new, diameter of brush Ø 250 mm width of brush 40.0 mm turning speed range 2850 U/min voltage 400 Volt total power requirement 1.3 / 1.8 kW weight of the machine ca. 36.0 kg dimensions of the machine ca. 415 x 467 x 356 mm Equipment: Kwedpfx Absxaamnocew - Deburring of individual pieces and small series - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions

Condition: used, Universal tool milling machine Brand: OPTIMUM Model: MT 100 Year of manufacture: 2018 – workshop tested Machine no.: J33021808035 Geometric acceptance with test report Accessories: Kodpfx Abow Rlvqocsww - 3-axis digital display DPA 2000 - Vertical milling head SK 40 with drawbar thread M 16 - Fixed table 1,120 x 260 mm (T-slot: 14 mm) - Machine lamp - Coolant system - Manual central lubrication - Operating manual Used as seen, without warranty The machine technically corresponds to the state of the art at the time of manufacture.

Condition: new, Year of construction: 2026, Heavy-duty design of the entire machine High running smoothness thanks to new spindle design Industrial motor Separate emergency-stop pushbutton Drilling depth stop LED machine light integrated in the drill head Precisely machined, stable drilling table with diagonally running T-slots with circumferential cooling water channel Drilling table can be tilted ± 45° and rotated 360 V-belt cover with safety switch Precision spindle bore Machine operation Safety electrics in 24 V DC voltage. Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle Thick-walled steel column for high force absorption and stability Solid, large dimensioned base plate with T-slots Dimensions and weights Column diameter 92 mm Length approx. 945 mm Width/depth approx. 485 mm Height approx. 2040 mm weight approx. 162 kg Drilling capacity Drilling capacity steel (S235JR) 30 mm Continuous drilling capacity steel (S235JR) 25 mm Drilling table Working surface length 355 mm Working surface width 355 mm Type of T-slots diagonal T-slots size 14 mm T-slots number 2 Rotation 360 ° Inclination 45 ° Distance spindle - drilling table max. 784 mm Speed range Speed range 120 - 1810 min¯¹ Number of speed ranges 9 Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Working surface length 230 mm Working surface width 300 mm T-slots size 16 mm T-slots number 2 Spindle quill stroke 125 mm Kodpfx Abog Uaiuecsww spindle mounting MK 4 throat 270 mm Location: Ex stock 54634 Bitburg - immediately available- [...]

Condition: new, Year of construction: 2026, OPTIturn TU 2004V - Lathe with infinitely variable speed control and digital speed display Picture shows OPTIturn TU 2004V Lathe with infinitely variable speed control and digital speed display Ksdpfecnxrcsx Abcoww Precise processing Heavily ribbed prismatic bed made of cast steel, inductively hardened and precision ground Hardened and ground bed guideways Hardened spindle nose (DIN 6350) Guaranteed concentricity of the spindle nose better than 0.009 mm Automatic length/lead spindle drive With longitudinal, cross and top slide Right-/left-handed rotation switchable in the control panel Emergency-stop pushbutton Rotary chuck protection Thrust bearing Lead screw mounted in two sintered bearings Large thread cutting range due to change gear set Simple and fast speed change via V-belt Change gearbox EMV filter class B (use in private households) Equipment details: Digital speed display Easy to read digital speed display Chip protection on the top slide Quadruple steel holder rotatable Roll rolled trapezoidal threads Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scaling 0.02 mm Main spindle Hardened and mounted in adjustable precision taper roller bearings Tapered roller bearings in P5 quality Cylindrical centering seat Hardened spindle nose with Ø 21 mm spindle bore Lathe chuck Concentricity better than 0,04 mm Scope of delivery: Three-jaw chuck Ø 100 mm centric clamping

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Ksdeg U Uv Uepfx Abceww Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A

Condition: new, Year of construction: 2025, functionality: fully functional, center height: 155 mm, total length: 1,632 mm, total width: 770 mm, total height: 540 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, bed width: 190 mm, overall weight: 360 kg, three-jaw chuck diameter: 160 mm, Substructure is not included, but can be added. Delivery Contents: Kwedpfx Asx Tr Rzebcjw Three-jaw lathe chuck Ø 160 mm, No. 4 Reducing sleeve MK 5 / MK 3 Two non-moving center points MK 3 Quadruple steel holder 25 mm Set of change gears Machine initial filling with quality oil Operating tool

Condition: new, Year of construction: 2010, Center of spindle to wall or column 235 mm Column diameter 60 mm Size of table plate 290 x 290 mm Motor output 1 kW Speed 50 - 4000 U/min. weight of the machine ca. 72 kg Kwjdpfsw Spc Rex Abcew

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 28 mm Kedpfx Aexh Swnjbcsww throat 200 mm bore stroke 105 mm table surface area 360x340 mm Distance spindle/table max. 540 mm turning speed range - stepless 120-3000 U/min