Used Oxy Cutting Machine for sale (66,223)

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine little used, in very good condition Equipment: – Pneumatic clutch and brake – Console – Heated plate – 3 working modes: single, continuous, time-delayed opening Cpjdpfxoyl Unxj Agkew – Centralized lubrication – Additional safety guards – Working tools – Hard pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication Codpfx Ageyl Um Uekopw – additional safety guards – operation tools – hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening Cjdpfx Agsyl Umnokepw – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: Cjdpeyl Ulwsfx Agkjpw – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Condition: excellent (used), Year of construction: 2020, operating hours: 22,500 h, functionality: fully functional, machine/vehicle number: 9041013, type of input current: three-phase, input current: 10 A, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, safety light barrier, Polar Mohr N 137 Plus – High-Performance Cutting Machine Year of manufacture: 2020 | Only 22,129 cuts | incl. spare blade | Top condition For sale is a Polar N 137 Plus high-performance cutting machine, built in 2020. The machine is in exceptionally good and well-maintained condition, with only 22,129 cuts on the counter – essentially as new. Highlights & Features • Professional industrial cutting machine for maximum precision • Very low cut count (22,129 cuts) • Spare blade included • Large air tables at the front and rear for gentle material handling • User-friendly operation via Polar N 137 Plus touch control panel • High cutting accuracy and repeat precision • CE-compliant, GS-certified • Made in Germany Key Technical Data (excerpt) • Model: Polar N 137 Plus • Year: 2020 • Total cuts: 22,129 • Cutting width: 1,370 mm • Power supply: 400 V / 50 Hz / 3-phase • Rated current: 10.1 A Areas of Application • Commercial and digital printing • Packaging and carton manufacturing • Further processing, collating, and cutting operations • Ideal for small to large production runs with the highest quality requirements Conclusion This Polar N 137 Plus is the perfect choice for companies seeking an almost new cutting machine with minimal operating hours. With its 2020 year of manufacture, extremely low cut count, and additional spare blade, this machine represents an exceptionally attractive market opportunity. Cedpfx Agsyc Hktjkjpw

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 441 h, machine/vehicle number: LCG3015AJ, laser hours: 228 h, laser power: 2,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 2 mm, table length: 3,070 mm, table width: 1,550 mm, travel distance Z-axis: 100 mm, type of cooling: water, compressed air connection: 6 bar, overall weight: 9,300 kg, total length: 10,136 mm, total width: 2,840 mm, total height: 2,432 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, The machine is in as-new condition. It is connected to power; test cuts are possible. Nozzle changer: 8 stations. Cpjdpfxjx Tft Aj Agkow

Condition: used, functionality: fully functional, Year of construction: 2007, Punching machine, barely used, weight: 8500 kg. Lot includes steel cabinet with contents. Contents consist of tooling, spares and miscellaneous small parts. Cjdpfx Aexzpuwsgkspw

Condition: used, Year of construction: 2020, x-travel , mm Cedpfjxtqxbex Agkopw y-travel , mm z-travel , mm STM MASTERCUT Waterjet Cutting Systems The all-round system for demanding requirements ----- MASTERCUT waterjet cutting systems are the perfect all-rounders for demanding cutting tasks. MasterCut waterjet systems offer the ability to create three-axis 3D cuts or sophisticated 2D cuts. The systems operate in a resource-efficient manner and are characterized by extremely low power, water, and air consumption. All structural components and screws are made of wear-resistant stainless steel or aluminum. Characteristic features include the flat underbody and smooth side walls with concealed linear guides without bellows and a high-pressure pipe integrated into the axes. The fully digital drive consists of a brushless AC servo motor with a multi-axis NUM or Eckelmann CNC control. The associated software runs on MS Windows and requires only a standard PC. ----- Advantages of MasterCut waterjet cutting systems Highest process reliability Automatic workpiece scanning and collision protection enable safe working. STM waterjet cutting systems can be marked as standard, and the use of the positioning laser allows for easy workpiece setup. Profitable and sustainable STM systems are characterized by low operating costs. The waterjet cutting systems are designed to use as little compressed air, electricity, and water as possible. SmartCut cutting software The easy-to-understand SmartCut waterjet cutting software can be adapted to your specific requirements through modular extensions. All parameters can be intuitively set and DFX files can be imported directly within the graphical user interface. Maximum operating comfort STM waterjet cutting systems are accessible from three sides. Control is via a standard Windows PC, and additional features such as manual control enable maximum operating comfort. ----- Technical specifications: Travel speed 15 m/min Positioning accuracy ± 0.08 mm (per meter at 20°) Repeatability ± 0.05 mm (per meter at 20°) Z-axis clearance 180 / 240 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!)

Condition: new, Durma HD-FO fiber laser Max. sheet size: 3048 x 1524 mm Max. sheet weight: 200 kg/m2 Z-axis stroke: 125 mm Cedpfsh H Dpkjx Agkjpw Max. Vector speed (x-Y): 141 m/dk. Max. Vector acceleration: 14m/s2 Positioning tolerance: +/- 0.05 mm Repetition accuracy: +/- 0.05 mm Dimensions: 5308x2810 mm, h= 1860 mm, 6582 mm with filter unit Power 1- 4 kW Focus distance: 125 mm with automatic focus

Condition: new, thread dia. M6 - M36 turning speeds 30 - 150 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - Includes quick-change chuck - for use with taps - for through holes and blind holes - Swivel motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting - Thread is guaranteed to be right-angled (90°) - High productivity - significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes swivel arm with large radius - for easy positioning of the tap on the workpiece - Highly economical due to low investment and maintenance costs - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals Scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-change holder according to DIN - Quick-change chuck Codoxab Elopfx Agkopw - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame with 2 drawers * milled support surface 900 x 600 mm * including 3 T-slots (16 mm) * large storage space and 2 drawers for storing tools * 4x swivel castors including parking brake - Mounts according to DIN 376: * M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36

Condition: used, Year of construction: 2013, table width 6000 mm table length 2000 mm Cedpfx Agoyk Dgzekspw burner heads 1 Equipment: - Plasma source Kjellberg Hi Focus 161i - suction unit - Compressor Technical data Kjellberg Hi Focus 161i plasma cutter: Cutting current at 100 % ED 10 - 160 A Marking current 5 - 25 A Cutting range 0.5 - 50 mm Piercing up to 30 mm Dimensions (L x W x H) 985 x 570 x 1140 mm Mass 206 kg

Condition: new, Year of construction: 2026, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min weight 4980 kg dimensions of the machine ca. 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 12 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver Cedsxv D T Ropfx Agkjpw 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Extraction system 20. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 35 mm STAINLESS STEEL 35 mm ALUMINUM 25 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Year of construction: 2017, condition: new, functionality: fully functional, Universally applicable bridge-type swing-beam cutting machine with lift table. Model: 5300A Designed for the manual cutting of sheet and roll materials. Machine configuration includes the following components: • Model 5300A / 1600 x 800 / 800 kN • Blade holder rails for fixed sheet width mounted on the bridge • Plastic cutting pad, type HY 78 Additional equipment: • Automatic die shifting device • Unwinding unit with powered feed for roll materials • Material hold-down device mounted at the table infeed for securing roll material during cutting • Laser material positioning device with 4 cross lasers • 1 spare cross laser Automatic die shifting device Material hold-down device mounted at the table infeed for fixing roll material during cutting Unwinding device with motorized feeding for roll materials Laser positioning system with 4 cross lasers and 1 spare laser Technical data: Cutting force: 800 kN Table area: 1600 x 800 mm Table height, approx.: 1000 mm Max. material passage height: 190 mm Stroke, adjustable: 15 – 165 mm Adjustable stops: 40 mm Height of safety light curtain: 750 mm Machine weight, approx.: 5,100 kg Hydraulics and drives: Cpsdpfxsyly R Es Agksw Bridge travel drive power requirement: 1.5 kW Bridge travel time, approx.: 2 sec. Closing speed: approx. 90 mm/s Cutting speed: 33 / 5.5 mm/s Return speed: approx. 52 mm/s Hydraulic motor power: 4 kW Oil requirement: 200 l (ISO VG 46) (The required quantity of oil is not included in the delivery.) Plastic cutting pad: Quality: HY 78 natural Shore hardness (D): 78 Dimensions: 1600 x 800 mm Pad thickness: 10 mm Material: polypropylene

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 50,000 h, control type: CNC control, actuation type: electric, controller manufacturer: Fanuc, laser type: CO₂ laser, laser hours: 50,000 h, laser power: 2,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, table length: 5,040 mm, table width: 1,550 mm, working length: 2,520 mm, working width: 1,500 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 60 m/min, workpiece weight (max.): 330 kg, type of cooling: water, overall weight: 6,500 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, Amada CO2 laser. Purchased in 2006. Operated intensively until 2017. In 2017, we acquired a fiber laser, and since then this unit has been used only occasionally for specialised tasks. The laser is fully operational but requires an inspection of certain components. X-axis is virtually unlimited after repositioning; Y-axis – 1500 mm. The laser is housed in a heated hall and has not been exposed to weather conditions. If purchased, we can assist with arranging loading onto transport. Cpedpfoyly Hmex Agkew

Condition: new, thread dia. bis M 36 turning speeds 0-100 U/min Csdpfx Asxab Igegkspw thread M5 - M36 working area 2050 Rmax. working range 500 Rmin. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 5,5 kW weight - pallet system ca. 500 kg Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disk * Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base * Oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 M27 / M30 / M33 / M36

Condition: new, thread dia. bis M 24 turning speeds U/min Cpodpfx Agoxab Iaoksw thread M5 - M24 working area 2050 Rmax. working range 500 Rmin. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3,0 kW weight - pallet system ca. 300 kg Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disk * Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base * Oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22

Condition: new, thread dia. M5 - M24 turning speeds 70 - 200 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - with micro spray system for constant cooling & minimal Cooling lubricant consumption - Includes blow-out device to remove chips, ensuring optimal visibility on the borehole - Includes quick-change chuck for using taps for Through and blind holes - Swivel motor unit for thread cutting at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting, thread is guaranteed right angle (90°) - high productivity, significant time savings compared to manual Threading - Quick-change chuck with integrated slip clutch prevents breaking of the tap - Includes large radius swivel arm for easy positioning tap on the workpiece - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals Cpedpfx Agsxaaybskew scope of delivery - Operation via touchscreen - Digital drilling depth display - Micro spray system - Blow-out device - Quick change mount - Quick-change chuck according to DIN - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame 900 x 600 mm (Art. No.: Mounts: DIN 376: M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24

Condition: good (used), Year of construction: 2002, functionality: fully functional, Waterjet System IR Manufacturer: WATER JET Ingersol Rand Model: OEM 30 S/N: 0211141 Year of manufacture: 2002 Control: TH 2030 – new and never used Pump completely overhauled in 2015 Working area: 3000 x 1500 mm Max. working pressure: 60 KSPI Operating voltage: 400 V Control voltage: 24 V Main fuse: 63 A Nominal current: 55 A Frequency: 50 Hz Cedpfsyrfg Esx Agkopw

Condition: new, thread dia. 12 M max. turning speeds 400 U/min thread M 3 - M 12 M working area 1600 R max. working range 500 Rmin. weight 16.0 kg Description: The AT II models have a radius of up to 1600 mm and thanks to their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - Tool holder with 6 cutter holders Cpodpfsxabbmox Agksw • M3 20111812 DIN 371 19 • M4 20111814 DIN 371 19 • M6 20111816 DIN 371 19 • M8 20111817 DIN 371 19 • M10 20111818 DIN 376 19 • M12 20111820 DIN 376 19 - with slip clutch - Control valve with lubrication - Including compressed air motor / maintenance unit - Adapter connection size 1

Condition: new, thread dia. 20 M turning speeds 400 U/min thread M 4 - M 20 M working area 1900 Rmax. working range 200 Rmin. Description: The AT models have a radius of up to 1900 mm and their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - including 7 thread cutting inserts • M3 20111812 DIN 371 19 • M6 20111823 DIN 371 31 • M8 20111824 DIN 371 31 • M10 20111826 DIN 371 31 • M12 20111827 DIN 376 31 • M16 20111829 DIN 376 31 • M20 20111831 DIN 376 31 - Control valve with lubrication - Including air motor - Adapter connection size 2 - The cutting head can be pivoted vertically downwards by 90 ° - The cutting head is pivoted and rotatable through 360 ° - Operating instructions in German Cedjxaaa Iepfx Agkspw * without the perforated table as per Fig.

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 4000 S Full Otomatik Alüminyum Pvc Çift Kafa Kesim Makinası, functionality: fully functional, - It is a fully automatic controlled cutting machine designed to cut PVC and Aluminum profiles straight or angled with a double head Ø550 mm saw. - Complies with CE standards. Cpedpfx Asramypogkow - Hydro - pneumatic hydro-check controlled saw movement - Cutting accuracy +/- 0.1 mm - Automatically adjusts to two inward angles of 90 and 45 degrees - Automatic slicing at 90 degree angle - 10" touch color panel display - Remote connectivity and technical support - 2 Ø550 mm saws - Servo motor motion system - 180 mm saw exit distance and cut 80 mm x 2 profiles - Hydro-check saw speed adjustment - 8 meter cutting feature - Multi-language support - Unlimited size capacity - Spray saw cooling system - 2 vertical clamps - 4 horizontal clamps OPTION - Barcode printer - Data transfer via USB memory

Condition: good (used), functionality: fully functional, Year of construction: 1999, laser power: 2,400 W, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,740 mm, overall weight: 23,000 kg, total length: 9,100 mm, total width: 7,900 mm, total height: 2,400 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, The machine is in good condition. Cpedoymrn Espfx Agkjw

Condition: new, functionality: fully functional, Year of construction: 2023, laser power: 3,000 W, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, NS-6022HG Tube laser cutting machine 3kw 3 Chuck Professional Pipe Laser Cutting Machine with automatic loading system with 6m automatic unloading with Chinese 3D bevel head-BLT tubes T Cedpfswu Rm Rjx Agkopw CE Anti-radiation glass protective guards AVR KIT OF NOZZLE, LENS ETC(SPCS FOR EACH) Series: NS-HG Type: Three chucks Groove function: Standard Power: 3KW Maximum pipe length: 7000mm Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm~150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flatoval tube: Short axis≥15mm, long axis ≤ 210mm Channel steel: Max20# I-beam: Max18# H steel: Max175*90mm Maximum acceleration: 1.0G Chuck maximum speed: 100r/min Machine weight: 10t Power supply specification: 380VAC, 50Hz Standard: Support servo (groove), dust prevention (Y axis), dust prevention (X axis), dust prevention (Z axis), safety fence (light curtain), zero tail material, cutting area dust removal, rear card hollow dust removal

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 049004, For Sale: Complete Set of Trimming Machinery Cedst Nd Eyepfx Agkjpw This set includes: Horizon HT-80 Three-Knife Trimmer Horizon DC-1000S Docking Conveyor Horizon CV8-3 Cooling Conveyor This equipment can seamlessly integrate with a Horizon BQ-470, BQ-500, SB-07 or SB-09S, SB-09V binding machines, enabling a fully automated trimming process. (Refer to the last picture for a visual explanation.) Perfect for streamlining your production line and improving efficiency! The process is as follows: after the brochure is bound and exits the Horizon binding machine, it is transported to the Horizon DC-1000S docking conveyor, where it is lowered and transferred to the Horizon CV8-3 cooling conveyor. As the binding process continues, the brochures move slowly along the conveyor toward the trimming machine, allowing the glue to cool. By the time the untrimmed brochure reaches the Horizon HT-80 three-knife trimming machine, it has already cooled and is automatically fed into the trimmer. Once the book is trimmed, it is automatically transferred to the gravity conveyor, where the final product is ready for packing. This streamlined layout minimizes the need for additional personnel, requiring only two workers: one to load the brochures into the binding machine and another to pack the trimmed books. 1. Horizon HT-80 Three-Knife Trimmer Serial No.: 049004 Year of Manufacture: 2016 Condition: Excellent, ready to use Counter: Approximately 800,000 Specifications: Min. Untrimmed Book Size: 145 x 105 mm Max. Untrimmed Book Size: 330 x 330 mm Min. Finished Book Size: 139 x 99 mm Max. Finished Book Size: 300 x 300 mm Accessories Included: Cutting and pressing plates (A4 and A5) Production Speed: 400–1,000 cycles/hour Controlled through color touch screen 2. Horizon CV8-3 Cooling Conveyor Serial No.: 008002 Year of Manufacture: 2016 Condition: Excellent, ready to use Key Features: Adjustable height, Metal plate for precise positioning of untrimmed brochures before entering the trimmer 3. Horizon DC-1000S Docking Conveyor Serial No.: 000005 Year of Manufacture: 2016 Key Feature: The main difference between the Horizon DC-1000S and the Horizon SS-80 docking conveyor is its superior design, which prevents untrimmed books falling from a high height, making it particularly suitable for thick books. Additionally, books are fed onto the conveyor individually, enhancing cutting precision and quality. Additional Details: Selling terms: EXW The equipment is sold only as a complete set; individual components are not available for separate purchase. The Horizon BQ-470 binding machine shown in one of the pictures is not for sale This is a direct sale from the printing house, not through a dealer. A video demonstration or manufacturer‘s brochure is available upon request. Currently located in Kaunas, Lithuania For inquiries or more details, please feel free to contact me.

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor >control panel >electric cabinet >capacity through spindle 60 mm Cedem Nb Rispfx Agkepw >max. piece length 340 mm