Used Packaging Material for sale (24,435)

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, - Machine in very good technical and visual condition, completely overhauled Cjdpfx Aoy I Ubxon Ujrc - Immediately available - Wide range of additional attachments available

Condition: used, empty load weight: 5,600 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, first registration: 08/2005, total length: 12,360 mm, suspension: air, tire condition: 80 %, load capacity: 32,400 kg, • Pneumatic unlocking mechanism • Electro-hydraulic power unit • Sliding carriage Cjdpfxsy Tcf Nj An Uerc • Length: 12.36 m • Drum brakes

Condition: used, Year of construction: 2020, Becker BZ-2 - Packaging System - 2 identical, mirror-inverted packaging lines available - without cutting machine - Year of manufacture: 2020 The system first trims the front of the cardboard to remove any possible transport damage. After trimming, a minimum side trim of 30 mm is made on both sides. Additionally, if required, a corner is cut from the cardboard, depending on the Fefco type. Finally, the cardboard is scored along the folding lines and discharged from the machine. The resulting waste material is removed from the system via a waste conveyor located underneath the machine. At the machine's discharge, a conveyor belt transports the waste into a container. If the side trim sections are too long, they must be cut within the system to ensure they can be smoothly conveyed out of the line. The blanks and products are transported to the folding station, where the cartons are erected and filled. In the Box Closing Unit, the cartons are sealed, labeled, and conveyed out of the system. Machine components (see schematic): (1) Buffer Table | (2) Conveyor Pack System | (3) FT30 Folding Table | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) FT30 Folding Table | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor Technical Data: Packaging Dimensions (top closure): - min. carton dimensions LxWxH: 500 x 120 x 100 mm - max. carton dimensions LxWxH: 2250 x 420 x 320 mm - max. product weight: 50 kg Packaging Dimensions (side closure): - min. carton dimensions LxWxH: 300 x 150 x 120 mm Crodsygipmepfx An Uoc - max. carton dimensions LxWxH: 1050 x 620 x 470 mm - max. product weight: 50 kg Installation: - Operating voltage: 400 V / 50 Hz - Rated current: 47 A - Pre-fuse: 63 A - Connected load: 32.5 kW - Control voltage: 24 V - Compressed air supply: 6 bar - Air consumption: 10 l/min - Sound pressure level: < 70 dB(A) - Machine dimensions WxHxD: 21,260 x 4,000 x 18,030 mm

Condition: ready for operation (used), Year of construction: 1999, Complete bottling and jerrycan packaging line up to 10 liters, consisting of: 4-nozzle volumetric filler (last used for filling containers from 1 to 5 liters) Semi-automatic pneumatic capper DIDAC MENDEZ labeller with 2 heads and a maximum label height of 160mm Crodsy Ewnpepfx An Usc Brand: J. ESQUERDA Model: LL-H/10.000/BS Year: 1999

Condition: excellent (used), Year of construction: 2021, Bag in Box automatic line for industrial liquid packaging (2021). Low usage. Designed for standard VITOP® DN15 Bag in Box fitments. Suitable for volumes from 3 to 20 litres. Complete line comprising ECOPACK MASTERFORM automatic case former for B1–B1 cartons with central sealing, minimum/maximum carton dimensions 100 × 220 / 115 × 225 mm and minimum/maximum carton height 210 / 400 mm; ECOFILL MASTER automatic filling machine with production capacities of approximately 780 bags/hour at 2.25 litres, 600 bags/hour at 5 litres and 290 bags/hour at 20 litres; 100-litre pressurised buffer tank; ECOPACK HOTMELT hot-melt case sealer; and automatic cartesian palletiser for 3 to 10 litre Bag in Box cartons, configured for continuous, accurate and reliable production. Codpfsyid Dbox An Uerc

Condition: excellent (used), functionality: fully functional, fuel type: diesel, operation weight: 24,600 kg, Year of construction: 2016, operating hours: 11,622 h, LIEBHERR LH24M, operating hours: 11,622. Weight: 24,600 kg. Engine: LIEBHERR 105W. Industrial boom: 6.10 m. Industrial stick: 4.50 m. Hydraulic cabin. Solid tires. Four outriggers. Cabin grill. CE certificate. In very good condition. Cedpfxjy U Huwe An Uerc

Condition: used, mileage: 4,88,223 km, power: 316 kW (429.64 HP), first registration: 06/2019, fuel type: diesel, overall weight: 18,000 kg, tire size: 385/65R22,5, axle configuration: 4x2, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, number of beds: 1, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), hydraulics, onboard computer, parking heater, soot filter, traction control, Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both procurement and sales extend beyond national borders; therefore, you will generally find the export price listed in our advertisements, as this is independent of the place of use. Yourtrucks GmbH compiles the contents of this website with the utmost care and ensures regular updates. This information is provided as general, non-binding guidance and does not replace detailed, individualized consulting regarding your purchasing decision. The provisions set forth in the sales contract are solely decisive. Subject to changes, errors, typographical mistakes, and prior sale. Exclusively our general terms and conditions apply. Languages - We speak English - On parle français - ?? ????? ?? ????? Credpfx Aney Sw U No Uec - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Year of construction: 2019, condition: good (used), Aluminum cylinders with diameters of 140 mm and 90 mm, wall thickness 5 mm; a clamping ring secures the 50 mm shaft stub, which is turned down to 45 mm; shell length: minimum 2720 mm, maximum 2800 mm. 27 pieces of 90 mm diameter cylinders, 6 pieces of 140 mm diameter cylinders. Price applies to the total quantity. Credpfey Nc H Ejx An Uec

Condition: used, functionality: unexamined, Complete metal testing and materials testing laboratory Industrial quality assurance/testing laboratory as a complete package A fully equipped professional metal and materials testing laboratory from the industrial QA sector is for sale. The package includes, among others: OES metal analysis, universal testing machine, technical cleanliness analysis according to VDA 19 / ISO 16232, metallography equipment, hardness testing, coating thickness measurement, laboratory scales, water analysis, laboratory devices, extensive Köttermann laboratory furnishings, and consumables. Crodpfx Aoy Rglnjn Uoc Manufacturers include: AMETEK/SPECTRO, GALDABINI, JOMESA, Struers, Fischer, List, Ernst, Zeiss, KERN, Mettler, IKA, Memmert, Macherey-Nagel, Hanna, WTW, and Köttermann. Key features: - AMETEK / SPECTRO SPECTROTEST TXC02 UV portable OES metal analyzer - GALDABINI QUASAR 100 universal testing machine / tensile tester 100 kN - JOMESA filter analysis system for technical cleanliness in accordance with VDA 19 / ISO 16232 - Struers TransPol-5 portable metallographic grinding and polishing system - Struers Rotopol-2 metallographic grinding and polishing machine - Fischer DELTASCOPE FMP30 coating thickness measuring system - List-Magnetik MEGA-CHECK Master coating thickness gauge - Ernst Computest SC portable hardness testing system - Carl Zeiss Jena Neophot metallographic reflected light microscope - Köttermann fume hoods, laboratory benches, hazardous materials cabinets, and chemical cabinets - Extensive laboratory consumables, laboratory glassware, and accessories Complete object description can be found in the documents.

Condition: used, mileage: 6,54,000 km, power: 331 kW (450.03 HP), first registration: 03/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Scania S450 4x2 tractor unit * Euro 6C * Automatic transmission * Retarder * Leaf-air suspension * Long-distance cab with 2 bunk beds * ACC adaptive cruise control * Lane departure warning system Crsdpfx Ansy R Iw Sj Usc * Emergency brake assist * Differential lock * Alcoa aluminium rims * 2 tanks, 1200 liters (700/500) * Stationary air conditioning * Automatic climate control * Auxiliary heater * Heated seats * Refrigerator compartment * Xenon headlights * Multimedia infotainment navigation system * Electric windows * 1st owner * ADR EXII EXIII FL AT

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, 🔧 Multivac Semi-Automated Blister Packaging Line (2021 – Unused) Complete Medical Device Packaging System – Fully Stainless Steel Available now at Used Machine Tools Ireland Ltd, this Multivac semi-automated packaging line is in as-new condition, originally installed in 2021 at a medical device facility but never used. This is a high-spec, turnkey blister packaging solution, ideal for medical, pharmaceutical, food and high-spec manufacturing environments requiring cleanroom-compatible, stainless steel equipment. This Multivac semi-automated blister packaging line (2021) includes dual T700 tray sealers, MR625 labelling system, robotic handling modules, inspection stations, and full conveyor system, designed for medical-grade blister packaging in stainless steel environments. Suitable for 150–180mm blister packs with double sealing process. 🚀 Key Highlights ✔️ As new – never used (2021 installation) ✔️ Full stainless steel construction – medical grade ✔️ Complete automated blister packaging line ✔️ Dual Multivac T700 tray sealers ✔️ Integrated labelling, inspection & robotic handling ✔️ Designed for precision medical device packaging ✔️ Includes large quantity of spare parts & tooling ⚙️ Packaging Process Overview This line is designed for high-efficiency double blister packaging: 4-place carrier tray automatically loaded with empty blister packs Manual filling of blister packs with product Tray moves to Multivac T700 Sealer #1 Automatic sealing + labelling via Multivac MR625 Cross Web Labeller Small blister packs are automatically transferred into larger blister packs (double pack) using a Multivac H242 Robotic Handler (double pack) Packs placed into 2-place carrier tray Tray moves to Multivac T700 Sealer #2 for final sealing Finished trays move to manual unloading & boxing stations via a Multivac H242 Robotic Handler Three inspection stages ensure quality control 📦 Product Size Capability Blister Pack Sizes: Credpfsyzf Ucsx An Ujc 150 x 150 x 70mm 180 x 180 x 80mm 🏭 Full Equipment List 🔹 Multivac Equipment 2 x Multivac T700 Automatic Tray Sealers High-performance automatic tray sealing system 1 x Multivac MR625 / MR6318 Cross Web Labeller Fully automatic cross web labelling 2 x Multivac H242 Robotic Handling Modules Automated product transfer High-speed pick & place functionality Designed for integration with packaging lines 2 x Multivac MTD351 Tray Denesters Automatic tray separation and feeding Reliable high-speed tray handling 🔹 ASYS Tecton Automation Equipment 2 x ASYS Tecton Tray Stackers 1 x Horizontal Tray Stacker (6 x 5 carriers) 1 x Horizontal Tray Stacker (4 x 5 carriers) 3 x ASYS Tecton Inspection Stations 🔹 Additional Equipment 23 x Conveyor Sections (various lengths) Multiple HMI Control Panels throughout line 13 x Stainless Steel Handling Trolleys Extensive spare parts package included 💡 Typical Applications Medical device blister packaging Pharmaceutical packaging lines Cleanroom packaging systems Double blister / sterile barrier packaging High-spec manufacturing environments 📦 Condition Installed 2021 Never used – as new condition Fully maintained & preserved Now dismantled - videos of line in operation are available Note: Specifications and information provided in each listing are supplied in good faith; however, their accuracy cannot be guaranteed. Some tables in the videos/photos are not included No printers are included

Condition: like new (used), functionality: fully functional, Of the total 24 material containers, 8 units are currently still available. Crjdswpp Ebjpfx An Uoc All containers are offered without material conveying devices. Only 4 units feature an extraction box beneath the container. External dimensions are 120 x 120 x 200 cm (length x width x height). Capacity is approx. 1,250 litres. The containers are in very good condition and originate from a cleanroom production environment where only PP material was processed.

Condition: excellent (used), functionality: fully functional, power: 160 kW (217.54 HP), fuel type: electric, maximum load weight: 48,800 kg, lifting height: 18,000 mm, Year of construction: 2012, Fuchs Terex RHL860D – Electric Material Handling / Loading Equipment Crsdjyf Nnyepfx An Uoc We offer this excellent-condition, ready-to-work Fuchs Terex unit. Manufacturer: Fuchs Terex Model: RHL860D Year of Manufacture: 2012 Condition: Very good This machine is fully electric driven, offering significant operational and environmental advantages: Key Advantages of Electric Drive: Zero CO₂ emissions Low noise levels with high-torque electric motors Minimal heat generation Future-proof drive technology Low maintenance and operating costs Comprehensive monitoring of power supply quality and machine grounding Designed for 24/7 operation Large working radius, expandable with optional cable drums or power packs An ideal solution for efficient, sustainable, and continuous material handling operations. Shipping assistance available from the Port of HaminaKotka, Finland. An electric excavator is well suited for this type of application, where the need for relocation is minimal. When necessary, the machine can be driven to the maintenance hall using a dedicated power cable. Compared to an internal combustion engine, the electric motor is largely maintenance-free. Another major advantage of electric power is that fuel does not gel even in severe cold conditions. During cold periods, the hydraulic system is kept continuously running, ensuring that the hydraulic oils remain warm. The Terex Fuchs contains 700 liters of hydraulic oil, and oil change intervals are determined through oil sample analysis. A significant reduction in operating costs is achieved through electric operation, which is considerably cheaper than diesel. The power supply comes from the factory network at 690 volts, which is stepped down on the machine to the Terex Fuchs operating voltage of 400 volts. The electric motor driving the hydraulics has an output of 160 kW. The pump delivers nearly 500 liters per minute at a pressure of 360 bar. Power to the pump is supplied according to the oil demand of the hydraulic consumers, which reduces overall power requirements.

Year of construction: 2007, condition: good (used), For Sale: Neat Ibonhart horizontal bag loader Brand: Ibonhart Model: APH6 Year: 2007 - With automatic bag table system - Infeed and outfeed conveyors included - Adjustable distances set mechanically - Robust and reliable machine - Manual and documentation present - Central oil lubrication Csdpfoy Egyzjx An Usrc Maximum product dimensions: Length: 50 cm Width: 20 cm Height: 14 cm Capacity: 50 pieces per minute Machine inspection on location is possible. Price: €19,000 EXW Includes proper loading and packaging. Transport negotiable Subject to type and typographical errors.

Year of construction: 2024, condition: used, This listing is for the Frozen in Time F100 Automated Freeze Dryer & Frigel Chiller Package. The unit is in full working condition and is ready for immediate release An exceptional opportunity to acquire a high-capacity, premium industrial freeze-drying setup purchased brand new in June 2024. This turnkey package pairs a high-performance Frozen in Time F100 Automated Freeze Dryer with a top-tier Frigel Air-Cooled Industrial Chiller Unit. Meticulously maintained and in excellent working condition, this system was built for reliable, continuous production. The current owner is transitioning away from the freeze-dried sweets market to refocus other business sectors, making this high-demand asset available immediately without the standard manufacturer build lead times. What’s Included in the Sale? - [x] 1 x Frozen in Time F100 Industrial Automated Freeze Dryer - [x] 1 x Frigel Industrial Air-Cooled Chiller Unit - [x] 3 x Complete Sets of Production Trays (To fully utilize the 22-slot configuration) - [x] Original Technical Documentation: Complete manufacturer specification sheets, engineering drawings, and manuals. Technical Specifications 1. Frozen in Time F100 Automated Freeze Dryer Designed specifically for food and industrial processes, the F100 handles the entire cycle from initial conduction freezing to final drying within a single pre-programmed sequence. - Manufacturer: Frozen in Time - Drying Capacity: Rated to freeze-dry 100kg+ of product per 16–24 hour cycle (dependent on product type). - Ice Condenser Capacity: 150kg - Ice Condenser Performance: 130kg / 24 hours - Ice Condenser Temperature: -60°C - Defrost System: Hot Gas - Shelves & Slots: 13 shelves featuring 22 tray slots. - Total Shelf Area: 10.4 m² - Shelf Spacing: 30mm - Chamber Temperature Range: -50°C to +90°C - Vacuum Pump: Premium Pfeiffer Duo 65 system Crjdpsy Tmrmefx An Uec - Refrigeration: Powerful 155m³/h Compressor utilizing R404A refrigerant - Unit Dimensions (H x W x L): 2.1m x 1.8m x 3.6m 2. Frigel Industrial Air-Cooled Water Chiller (MRS Series) An industrial-grade process cooling unit characterized by an ultra-efficient, small footprint designed to sit perfectly alongside processing machinery. - Manufacturer: Frigel - Compressor: High-reliability hermetic rotary Scroll compressor - Refrigerant: Ozone-friendly R410A - Condenser Technology: High-efficiency full-aluminium microchannel condenser. Delivers 20% to 40% higher heat exchange performance and a 60% weight reduction compared to conventional finned-tube models. - Working Parameters: Supports water working temperatures from 0°C to 25°C and is rated for high ambient temperatures up to 45°C. - Maintenance: Robust design that is exceptionally easy to clean using a standard pressure washer.

Condition: used, mileage: 5,45,368 km, power: 355 kW (482.67 HP), first registration: 06/2022, fuel type: diesel, empty load weight: 7,516 kg, maximum load weight: 12,984 kg, overall weight: 20,500 kg, axle configuration: 4x2, wheelbase: 3,800 mm, next inspection (TÜV): 06/2026, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, number of seats: 2, Equipment: air conditioning, cruise control, low noise, onboard computer, parking heater, Unladen weight: 7516 kg, permissible total weight: 20,500 kg. 1st axle: 385/65 R22.5, 2nd axle: 315/70 R22.5. Fabric seats, grey interior, leaf/air suspension, retarder, tachograph, fifth wheel coupling, electronic braking system (EBS), electronic stability program (ESP), adaptive cruise control (ACC), comfort seats, air-suspended driver’s seat, seat heating, radio, leather steering wheel, lumbar support, alloy wheels, electric windows, outside temperature display, electrically adjustable exterior mirrors, wide-angle mirror, immobilizer, central locking, sun visor, refrigerator, daytime running lights, information and service system, speed limiter, wide tires: 385 front axle, storage box. Tyres: 385/65R22.5 9mm front axle, 315/80R22.5 6-10mm rear axle. Subject to errors and changes. Credpfx Ajyixudsn Usc

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 47070001, For separating and separating light and impurities Drum diameter x width: 1,400 x 1,200 mm Vibrating feeder Crodpjqi Eh Hjfx An Uec Blower with V = 7,000 m³/h incl. steel construction, platform, railings, etc.

Condition: good (used), fuel type: diesel, color: green, Year of construction: 2019, operating hours: 9,400 h, General information Year of manufacture: 2019 Field of application: Construction Serial number: 818.0.2497 Technical information Number of cylinders: 1 Empty weight: 19.000 kg Functional Mast length: 9 m Condition Technical condition: good Visual appearance: very good Codpfx Aoyzh Ncsn Uerc Warranty Warranty: Sennebogen 818E K9 ULM Nice Sennebogen with low hours. sorting grab optional. For more information please contact us. Other information Emissions class: Stage V

Condition: good (used), fuel type: diesel, Year of construction: 2017, operating hours: 8,550 h, Year of manufacture: 2017 Drive: Wheel Mast length: 14 m CE mark: yes Technical condition: good Visual appearance: good Warranty: LH30 M GA14 dealer maintained Nice Liebherr LH30 with low hours. Liebherr orange peel grab optional. For more information please contact us. Price: On request Serial number: 094970 Crjdpfx Ajy Shpkjn Ujc

Condition: used, mileage: 3,34,726 km, power: 412 kW (560.16 HP), first registration: 02/2023, fuel type: diesel, empty load weight: 7,986 kg, maximum load weight: 10,014 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 03/2027, color: green, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2023, Equipment: ABS, air conditioning, cruise control, hydraulics, navigation system, parking heater, Color: Royal Green (RAL6004 CM), Current tires: M+S tires, Unladen weight: 7,986 kg, Permissible total weight: 18,000 kg, Tire size: 315/80 R22.5, 1st axle: , 2nd axle: , Seats: black leather, Air suspension, Retarder: R4700D, Digital tachograph: Smart ADR STONERIDGE, Fifth wheel coupling, PTO: EG9R DCP1B, Electronic braking system (EBS), Electronic stability program (ESP), Automatic climate control, Stationary air conditioning, Radio navigation system, Adaptive Cruise Control (ACC), Auxiliary heater: 3 kW, Air-suspended driver's seat: "Premium" with seat ventilation, LED headlights, Digital radio reception (DAB), Scania Lane Departure Warning System, Rain sensor, Leather steering wheel, Alloy wheels: Alcoa Dura-Bright, Electric roof hatch, Fog lights: LED, Electrically adjustable and heated exterior mirrors: driver/passenger side, Sun visor: external trim, Storage package: external storage compartment driver/passenger side, Refrigerator, Axle load indicator: front/rear axle, LED daytime running lights, Scania Side Defender, Foldable passenger seat, Emergency braking assistant, - Roof console rear wall driver's cab - Microwave - Electric sunblind - Long-range roof spotlights, Non-binding offer, errors and prior sale reserved. Crsdpfxoy N Igke An Uoc

Condition: used, mileage: 4,86,245 km, power: 353 kW (479.95 HP), first registration: 03/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2019, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, For sale: 1 x DAF Super Space Cab * 1st owner * Built in 2019 * First registration: 03/2019 * Front axle: 315/70 R22.5 * Rear axle: 315/70 R22.5 * Original mileage: 486,000 km * ZF automatic transmission * Intarder * Wheelbase: 3,800 mm * Refrigerator * Luxury bed * 1 x fuel tank * OBU prepared * Luxury driver's seat * Rear axle air suspension * Front leaf suspension * New service * ADR * Tipping hydraulics * 2 x keys with remote central locking If you have any questions, you can reach us during the day: Richard Kanwischer: Phone and WhatsApp (German and English) Paul: Phone and WhatsApp (German, ?????, ?????, English) Crodpfx Asy Riuxon Ujc Paul: Viber (German, ?????, ?????, English)

Year of construction: 2009, condition: good (used), machine/vehicle number: 6863.209.036, The machine has previously been used for triangular shaped packages containing Swedish crisp bread. It can be powered on at inspection. The machine is stored in our warehouse in Lund. Cjdpoy Nmhtsfx An Ujrc

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 21-2584 BE ATS, type of input current: three-phase, total height: 1,680 mm, input voltage: 400 V, total width: 2,950 mm, total length: 1,800 mm, air demand: 38 m³/h, Equipment: documentation/manual, Description: For sale: Automatic Cartoning Machine SOCO PACK BE-2200 ATS (RIGHT) High-speed automatic carton erector with bottom sealing module and conveyor Basic information: Model: SOCO BE-2200 ATS RIGHT Type: Automatic carton erector with bottom tape sealing Version: Right-hand (RIGHT) with CE enclosure Condition: New / very well maintained, ready for immediate operation Location: EXW Prešov, Slovakia Technical specifications: Capacity: High-speed operation – suitable for fully automated lines Power supply: 3 x 400 V AC, 50 Hz, 0.5 kW Air consumption: 38 l/cycle, min. 6 bar Discharge height: Adjustable: 560 – 850 mm Pneumatic components: FESTO Control system: Siemens S7-1200 PLC with touch panel and Ethernet connection Operating languages: English, German, Slovak Equipment and features: Cjdpfoy Exa Hsx An Ujrc Automatic bottom carton sealing with tape Horizontal motorized carton magazine (length 1500 mm, capacity approx. 190 cartons) Magazine setup using counter and hand crank – quick format changeover Touchscreen control panel with cycle management, alarms, and demo mode Safety sensors with end-of-conveyor alarm Pneumatic stop system A-60 + powered roller conveyor (1230 mm, height 490–700 mm, speed 20 m/min) Color: RAL 9006 (aluminium grey, powder-coated) Accessories: Extension kit for 0.5 L and 0.7 L cartons Feeding brush for square cartons Vacuum suction cups (2 pcs) – cover the full required size range Flap spreader for bottom flaps – suitable for thin or 5-ply cartons Tape monitoring sensor (optional): detects empty tape, breakage, or incorrect application

Condition: like new (used), functionality: fully functional, power: 97 kW (131.88 HP), fuel type: diesel, color: yellow, overall weight: 22,950 kg, Year of construction: 2024, operating hours: 500 h, Equipment: air conditioning, cabin, Material Handling Machine JCB JS 20 MH IndustryPLUS featuring JCB DieselMax 4-cylinder turbo diesel engine 4.8 L displacement with 97 kW (130 HP) Emission standard: EU Stage V Equipment: * Hydraulically height-adjustable comfort cab * Sun visor (roof window) * 2 x 12V sockets * Air-suspended and electrically heated comfort seat * SCR (Selective Catalytic Reduction) * 7" LCD color display with rear and side camera * Protective grille for windshield, 2 mm thick, with opening size 25 x 25 mm * 5 x LED work lights for boom and cab * 3 x rotating beacons (1 on cab roof, 2 on counterweight) * Electric refueling pump * LiveLink * Telematics system * SS/1594 system generated * Wheel chocks (in toolbox) Crsdpfx Anjy Ivhme Usc * Coarse-mesh cooler * Spiral/tube fan * Wastemaster chassis with 2.50 m ZF axles and 4-point outriggers * 8 solid rubber tires * Sorting grab * Bucket coupler without load lifting point for sorting grab * German homologation * Activated carbon filter, fresh air filter for the cab

Condition: used, mileage: 5,45,368 km, power: 355 kW (482.67 HP), first registration: 06/2022, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2026, brakes: retarder, color: white, gearing type: automatic, Equipment: air conditioning, electronic stability program (ESP), parking heater, soot filter, Model Year * Model Year: 2022 Transmission * Automatic transmission, 12+2 gears Assistance Systems * Electronic Braking System (EBS) * Adaptive Cruise Control (ACC) Lighting & Visibility * Daytime running lights Audio & Communication * Radio * Information and service system Exterior * Leaf/air suspension Crsdpfxsyiwtxj An Ujc * Fifth wheel coupling * Low-noise * Alloy wheels * Electrically adjustable exterior mirrors * Speed limiter * Wide tyres: 385 front axle * Storage box Safety * Retarder * Electronic Stability Program (ESP) * Outside temperature display * Wide-angle mirrors * Immobiliser Interior * Fabric seats * Tachograph * Leather steering wheel * On-board computer * Sun visor * Cool box Comfort * Air conditioning * Auxiliary heater (parking heater) * Comfort seats * Air-suspended driver's seat * Heated seats * Lumbar support * Electric windows * Central locking Tyre Sizes * 1st axle: 385/65 R22.5 * 2nd axle: 315/70 R22.5 Other Dimensions & Weights * Payload: 12,984 kg * Permissible gross weight: 20,500 kg * Fuel tank capacity: 310 l * Wheelbase: 3,800 mm ----Tyres: 385/65R22.5 9 mm front axle; 315/80R22.5 6-10 mm rear axle Errors and changes reserved.