Used Paint Removal for sale (8,146)

Condition: new, maximum load weight: 46,800 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck * Gooseneck with beveled front corners at approximately 45° and a rear bevel of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Extendable platform * with rear bevel of approximately 1,000 mm x 8° * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) Crsdpfszk S Dmex Aptsg * 3 pairs of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings, lying horizontally at the front of the platform (LC 10,000 daN) * Recesses in the outer frame of the platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with non-slip steel plate flooring over the axles Axles * BPW axles and suspension * 1st axle rigid, all other axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool kit * Tires * 245/70 R 17.5 3PMSF * Load index (146/146 F) * TPMS: TPMS tire pressure monitoring system according to ECE R 141 Kingpin * JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * in accordance with EU regulations with EBS-E (4S3M) Paint finish * Complete steel construction automatically blasted with a blasting wheel system after welding * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat * solid color in RAL 3002 carmine red according to the RAL 841GL system * Rims in silver gray. Rear section metallized and painted in RAL 9010 (pure white) * Metallic paint not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Steel construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system * in accordance with EU regulations Lighting * 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pole sockets * Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Incl. the following additional equipment * 2-inch kingpin * One galvanized steel front wall, approximately 400 mm high * Electro-hydraulic unit (± 45kg) * Steering from the front and rear via cable remote control, operated via push buttons, with single-axle steering (without installation in the central beam) * 1 pair of recessed lashing rings along the central beam at the rear in the bevel (LC 10,000 daN) (± 3kg) * On the gooseneck, aluminum side boards and rear wall, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized plug-in stakes are removable. (Length of the structure approximately 2,560 mm) (± 46kg) * A galvanized toolbox, integrated in the beveled gooseneck (± 47kg) * 3 pairs of WADER container pockets in the platform for a 20' (30?) or a 40? container (± 30kg) * 6 pairs of stake pockets for plug-in stakes, approximately 100 x 50 mm, in the outer frame of the platform (± 18kg) * Extensions, galvanized, extendable by app

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Cedpfsziwwiox Aptjrg Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with rear * 9-tonne Valx axles with disc brakes Ø 430 mm * Rims offset ET 120 * Automatic lift axle on the first axle * Operable via a switch on the chassis or by pressing the service brake three times * With traction aid, load on 2nd and 3rd axle up to 130% under 30 km/h * Raise/lower via EBS modulator control * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm Cedpfeyq Ufnjx Aptsrg * Branded tyres at manufacturer’s discretion, tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Frame top edge hot-dip galvanized * Paint: 1 layer, 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-chamber tail lights

Condition: used, mileage: 77,040 km, power: 63 kW (85.66 HP), first registration: 06/2020, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 0204. LR70391 ----EQUIPMENT - Fiesta Van: Rear seats removed - Ford Navigation incl. Ford SYNC 3, DAB/DAB+ - Paint: Frost White - ABS electronic with EBD - Airbag: Passenger airbag deactivation - Activated carbon filter - Ambient lighting, front - Exterior mirrors, adjustable and heated - Body styling kit - Brake light, third - Headliner, black fabric - Roof console with glasses compartment - Roof spoiler, painted in vehicle color - Diesel particulate filter - Rev counter - Door sill trim "ST-Line", front - Electronic Stability Program - Driver information system - Lane Keeping Assist incl. Lane Departure Warning - Suspension: Sport-tuned - Power windows, front - Ford Easy Fuel - FordPass Connect incl. Wi-Fi hotspot - Luggage compartment cover - Luggage compartment lighting - Speed limiter - Cruise control - Transmission: 6-speed manual - Glove compartment, illuminated - Rear window wiper/washer system - Rear window heating - Interior lighting with LED technology - Intelligent Safety System - Isofix mounting Cedpfx Apoyy Hhhstsrg - Coat hooks - Air conditioning with automatic temperature control - Headrests, height-adjustable - Radiator grille in "ST-Line" design - LED tail lights - Steering wheel: Leather steering wheel - Steering column, adjustable - Vanity mirror in driver and passenger side - Center console with integrated armrest - MyKey key system - Emergency brake light - Package: Driver Assistance Pack I - Pedals with aluminum accents - Upholstery: Fabric - Wheels: LM 7J x 17 - Wheels: Tire pressure monitoring system - Rear seat bench, split folding 40/60 - Shift knob in ST-Line design - Windscreen wipers with intermittent function - Windscreen wipers with rain sensor - Headlights in projection lens design - Headlights with "Welcome Function" - Headlight assist with day/night sensor - Power steering, electro-mechanical - Seat: Driver's seat, height-adjustable - Seat: Sports seats, front - Start-Stop system - Ford Power Start - Bumpers, painted in vehicle color - Door handles, painted in vehicle color - Variable radiator air intake - Immobilizer - Central locking with remote control ... and more ----The vehicle is in original condition! Nationwide delivery possible for an additional charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing/leasing also possible without a down payment! Do you have any questions? We would be happy to advise you!

Year of construction: 2019, condition: good (used), Sturm Coating System Description For sale is a complete industrial Sturm robotic painting system manufactured in 2019. The automated coating system was used for the serial coating of components and originates from an industrial production facility. Crodozka Sfopfx Aptsg The used paint line includes, among other components, a paint booth, drying and cooling zones, conveyor technology, and several KUKA and Yaskawa industrial robots. The system is complemented by a thermal exhaust air purification unit. Thanks to its automated system design, the robotic painting line is particularly suitable for industrial applications in the automotive industry, metalworking, and serial production. An inspection at the Hamburg site is possible by prior appointment. Technical Data & Scope of Delivery Manufacturer: Sturm (system) / KUKA & Yaskawa (robots) Year of manufacture of main system: 2019 Previous operation: Three-shift operation, condition consistent with age System components: Units, drying and cooling zone, paint booth, loading and unloading station Included robots / peripherals: Several spare KUKA robots, models KR 210L 150-2 / KR 210 2, manufactured between 2006 and 2012 Associated robot control cabinets 2x Yaskawa EPX 2900 robots 1x thermal post-treatment / exhaust air purification system, VeniaKab / RNV Condition Information Control technology: According to the plant maintenance department, the control technology is up to current technical standards Electrical and mechanical components: Predominantly in condition consistent with age or in good condition Cybersecurity Data Deletion For security reasons, all hard drives from the robots and PC-based stations were removed. Dismantling Ex Works Hamburg There are two options for dismantling, loading, and transport: You carry out the dismantling and loading yourself on site. If you do not have the necessary personnel or equipment for dismantling, we can provide the complete dismantling, professional removal from the production hall, and loading as an additional service. The costs are calculated by prior agreement and according to the work involved. Please contact us in advance if you are interested. “Everything from a single source: We are pleased to offer suitable bank financing for your project.” komplett-konzept.leasingo.de You can find further new and used items in our shop. International shipping costs available upon request.

Condition: used, maximum load weight: 48,300 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck with beveled front corners at approximately 45° and rear bevel of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approximately 30 mm thick. Loading platform with double extension and rear bevel of approximately 500 mm x 8°. 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 4 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings mounted horizontally at the front of the loading platform (LC 10,000 daN). 1 intermediate table approximately 250 mm wide. Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN). Hardwood flooring approximately 48 mm thick, with diamond plate flooring over the axles. Axles: BPW axles and suspension, all axles hydro-mechanically steered. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Tires: 245/70 R 17.5 3PMSF, load index (146/146 F). Kingpin: JOST kingpin (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking system: Complies with EU regulations, with EBS-E (4S3M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Steel construction: Made of high-strength fine-grain steels. Crjdpfxozqiitj Apteg Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa). Electrical system: Complies with EU regulations. Lighting: 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connecting strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098. Includes the following additional equipment: 2-inch kingpin. A galvanized steel front bulkhead, approximately 400 mm high. Yellow-red air couplings on the galvanized front connecting strip. 4 wheel chocks with holders on the front bulkhead. A spare wheel holder in front of the front bulkhead. Electro-hydraulic unit. Trailing steering at the front and rear, operable by cable remote control via push buttons, with single-axle control of the axles (without installation in the tractor unit). TPMS tire pressure monitoring system according to ECE R 14. Load gauge to determine the axle loads, including a load chart. Aluminum side walls and rear wall on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H). The rear galvanized plug-in profiles are removable (overall length approximately 2,560 mm). A galvanized toolbox, integrated in the beveled gooseneck. 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40' or 45' container. 7 pairs of profile pockets for plug-in profiles approximately 100 x 50 mm in the outer frame of the loading platform. Extensions, galvanized, extendable by approximately 230 mm on each side. Sliding attachment rails for aluminum loading ramps at the rear of the vehicle. 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear. Lift axle on the front axle with control via TEBS E depending on the current axle load and the current load status. Central lubrication system with 2 BEKAMAX (Pico) pumps with normal grease NLGI-2, removable protective cover around the pumps. 2

Condition: used, mileage: 10,700 km, power: 120 kW (163.15 HP), color: grey, gearing type: automatic, number of seats: 8, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice from us, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Phone: Crodpeztin Iefx Aptjg A50 Front axle with increased load capacity, B25 Parking brake, electric, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, CA3 Active Steering Assist, CF0 Standard chassis, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CM2 Bumpers and trim parts painted in vehicle color, CU4 Aerodynamics package, D12 Roof rails, E07 Hill-start assist, E1D DIGITAL RADIO (DAB), E1E Navigation, E4S Smartphone integration package, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, EL9 2-way loudspeakers front and rear, ET4 Active Distance Assist DISTRONIC, F2W Winter package, F3Z Comfort closing, F64 Exterior mirrors, electrically folding, F66 Lockable glove compartment, F68 Exterior mirrors, heated and electrically adjustable, F71 Interior mirror, automatically dimming, FK2 Radiator grille, chrome-plated, FKB PANEL VAN, FP2 Mirror package Vito, FP4 Chrome interior package, FR1 Rear camera, not foldable, G43 9G-TRONIC, H00 Warm air duct to passenger compartment, H12 Auxiliary hot water heater, H15 Seat heating for front passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, HZ0 Auxiliary heater, electric, HZ7 Climate control system, semi-automatic, TEMPMATIC in the rear, J55 Seatbelt warning system for front passenger seat, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JB7 Parking package with reversing camera, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JM2 Extended automatic restart on highways, JM3 Route-based speed adjustment, JM4 Active Speed Limit Assist, JS3 Driving Assistance Package, JW8 ATTENTION ASSIST, JX2 Service interval 40,000 km, K51 Mis-fueling prevention, KB5 Main tank 70 liters, L45 MULTIBEAM LED with high beam assist PLUS, LA2 Headlamp Assist, LC4 Comfort roof control unit, LD9 Interior light(s) in the rear, LE1 Adaptive brake light, LE6 Night lighting rear, LX5 Europe, M60 Generator 14 V / 250 A, M6A EMISSION STANDARD EURO 6E-BIS M1, M72 Vehicle compatible with HVO fuel, MG9 Generator management, MJ8 ECO Start-Stop function, MK8 Speed limitation 210 km/h, MU4 OM 654 DE 20 LA 120 kW (163 hp) 3800/min, MX0 BlueEFFICIENCY package, Q50 Trailer coupling, ball head, removable, QA4 Trailer load 2500 kg, R17 Light alloy wheels 7 J x 17, 5-spoke design, RX8 Wheel manufacturer Ronal, RY2 Tire pressure monitoring system on front and rear axle, wireless, SA1 Seat cushion depth adjustment, driver, SA2 Seat cushion depth adjustment, front passenger, SA6 Airbag, front passenger, SB1 Comfort driver's seat, SB2 Comfort front passenger seat, SE4 Lumbar support, front passenger seat, SE5 Lumbar support, driver's seat, SH1 Thorax-pelvis sidebag, driver, SH2 Thorax-pelvis sidebag, front passenger, SH9 Windowbags for driver and front passenger, SK2 Seat occupancy detection, driver's seat, SK6 Child detection in vehicle, passive, T14 Active door lock, sliding door, T19 Sliding door, left, T70 Childproof lock on doors in passenger compartment, T74 Grab handle for entry, U3R Seat rails with quick-release mechanism, 3 rails, U73 Armrests for seating in passenger compartment, US4 3-seater bench seat, comfort, 1st row, outer seat foldable, US5 3-seater bench seat

Condition: new, Year of construction: 2026, For sale: various nozzles from Nozzitec - COLD JET A quality. Also applicable to all COLD JET blasting machines. AERO 30 AERO 40 FP / HP Codpfjztkv Hox Aptsrg AERO 75 DX AERO 80 FP We have all parts in stock for these machines. Please contact us. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: new, Year of construction: 2026, For sale: various nozzles from Nozzitec - COLD JET. A quality. These nozzles can also be used on all COLD JET MICROCLEAN blasting machines. Credjztkw Ropfx Apteg We have all the parts in stock for these machines. Contact us. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, mileage: 33,200 km, power: 174 kW (236.57 HP), first registration: 02/2024, fuel type: diesel, overall weight: 3,100 kg, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 6, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, E07 Hill Start Assist, Z3N Night Package, Q50 Trailer coupling, ball head, removable, FB4 AMG spoiler lip on tailgate, JA7 Blind Spot Assist, T56 Electric operation for sliding door, left, T55 Electric operation for sliding door, right, EY5 Mercedes-Benz emergency call system, BS1 Brake calipers with Mercedes-Benz lettering, EY6 Breakdown management, JS1 360-degree camera, FK4 Radiator grille, painted black, FK5 Edge trim strip, black, anodized, LG2 LED Intelligent Light System, R1U AMG light-alloy wheels, 8 J x 19, black, LG4 Tail, brake and indicator lights in LED technology, LG8 High beam assist PLUS, SE1 Active seat ventilation for front passenger, SE0 Active seat ventilation for driver, EZ6 Parking package with 360-degree camera, XO7 Mercedes-Benz Mobilo with roadside assistance and extended warranty, EZ8 PARKTRONIC, SE5 Lumbar support for driver's seat, SE4 Lumbar support for front passenger seat, QA4 Trailer load 2500 kg, T70 Child safety lock on doors in the passenger compartment, T74 Grab handle for entry, Y10 First-aid kit, MJ8 ECO Start-Stop function, 804 AEJ X3/1, IB6 Model series C447 Vito/V-Class, SF2 Front passenger seat, electrically adjustable, SF1 Driver's seat, electrically adjustable, VL7 AMG floor mats, H00 Warm air duct to the passenger compartment, Z42 Approval as a passenger car, C70 Pedestrian protection, C74 Illuminated Mercedes-Benz lettering on entry, H12 Auxiliary hot water heating, J55 Seatbelt warning system for front passenger seat, H16 Seat heating for driver, H15 Seat heating for front passenger, XA8 Weight variant 3,100 kg, JF1 Rain sensor, RF1 Tire brand Continental (10), SH2 Thorax-Pelvis-Sidebag front passenger, SH1 Thorax-Pelvis-Sidebag driver, SH8 Windowbags for driver/front passenger and rear, H20 Heat-insulating glass all around, JW5 Lane keeping assist, JW8 ATTENTION ASSIST, PS2 AMG Line, Y44 Warning triangle, ZG2 All-wheel drive, We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM! Further:!! Leasing/financing and trade-in possible! !! !! - Errors and prior sale excepted! Cjdpfx Apoztkxuotorg - All information without guarantee ... more on our homepage

Condition: used, mileage: 48,292 km, power: 103 kW (140.04 HP), first registration: 06/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,363 mm, total width: 2,050 mm, total height: 2,522 mm, loading space length: 4,070 mm, loading space width: 1,860 mm, loading space height: 1,921 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 1182. G007077 ----EQUIPMENT * Rear doors with a 270° opening angle * Paint: Solid color paint * Package: City - Blind Spot Assist: (+ Rear Traffic Alert + Trailer Assist: Trailer and trailer length detection) - Electrically folding exterior mirrors - Rear parking aid: Reversing camera (incl. 7" audio system with touchscreen + DAB + Apple CarPlay and Android Auto) * Blind Spot Assist * Seat Belts: Three-point safety belts on all seats - Seat belt force limiter, front - Double seat belt pretensioners, front * ABS * Storage compartment on the dashboard * Storage: - Storage compartment under the driver's seat (not with seat base trim) - Storage compartments in the front doors - Storage compartment above the glove compartment - Storage compartments above the ventilation nozzles in the center of the dashboard - Container, removable under the front passenger seat - Glove compartment on the right * Airbag: Driver airbag * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, incl. side turn signal with wide-angle insert * Hill-Start Assist * On-board computer * Brake assistant, mechanical * Double dome light in the cab with delay function * Tachometer * Adaptive third brake light * ESP incl. ASR: Brake assistant, hydraulic + Hill-Holder automatic locking for starting on a slope + Load-Adaptive Control (adjustment of ABS, ASR and ESP functions to vehicle load) * Rear parking aid, acoustic * Power windows, front, electric with convenience function on the driver's side * Pedestrian warning (acoustic) rear * Speed limiter/cruise control * Transmission: 6-speed manual transmission * Cup holder and clipboard Crjdpfx Aezr Az Eopteg * Rear door (double-leaf), closed * Air conditioning, front, manual, with pollen filter, incl. cooled glove compartment * Headrests, front, fully padded * Steering wheel with reach adjustment * Headlight range adjustment, manual * Multifunction display with display for time, warning messages for lights on and exceeding the selected speed, as well as on-board computer * Particulate filter: Diesel particulate filter * Upholstery: Fabric * Side protection strips in black * Service interval display * Power steering * Seats: Driver's seat with longitudinal, height and backrest adjustment * Seats: Driver's seat with armrest and lumbar support + Front passenger double seat * Start/Stop system * Socket (12 volts) in the center console * Rear bumper with step * Daytime running lights * Partition, closed * Doors: Sliding door on the right, sheet metal * Inertia switch to interrupt fuel and electrical supply in the event of an accident * 10x lashing eyes according to DIN 75410-3 on the cargo floor * Warning tone and light for unfastened seat belts, front * Immobilizer with transponder * Central locking with high-frequency remote control ... and more ----The vehicle is not detailed! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle in part exchange. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,250 kg, maximum load weight: 14,750 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 1,120 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis for central-axle swap trailers Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy 20"-based arms for 7.15 m, 7.45 m, and 7.82 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) 1 pair of front gear-driven support legs, with straight lower section and single-sided operation on the right side 1 pair of rear gear-driven support legs, with straight lower section and single-sided operation on the right side Side impact protection set inward, for optimal clearance to the swap body supports Steel underrun protection Rear mud flaps across the entire width *Towing equipment for central-axle trailers Towing beam with certified 50 mm tow eye, freight forwarding version Towing beam clamped/bolted, easily replaceable and partially adjustable in length! Lower coupler on towing beam, free towing beam length approx. 2200 mm Folding bracket with spring support on the towing beam, for routing the connection cables to the truck *Axles + Suspension SAF disc brake axles “Laser-aligned axles/chassis” reduces tire wear and fuel consumption Air suspension without lift axle *Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Air reservoir: 208 liters Spring-loaded parking brake Duomatic connection at the front, with connecting line to the tractor unit, connection at the rear right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection at the rear right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve, hold function in both lower and lift positions Vehicle – Vehicle Stability Control System Brake release function via a pushbutton on the vehicle next to the lift & lower valve, for releasing the brake while coupled; EBS power supply must be ensured! *Wheels and Tires 385/55 R22.5" Manufacturer's choice Steel rims, factory silver Crsdozd Trrspfx Apteg *Electrical System 24 volts, multi-chamber LED lights, yellow LED side lighting, LED license plate lighting, (Note: With certain towing vehicles, false diagnostics may occur even though the function is working properly) 2 white LED front position lights 2 white/red LED rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection on the right rear Additional LED work light(s), recessed and integrated into the rear, activated via the reverse light LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of Registration/License Plates Germany With DEKRA approval and certification (per §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Warning sign per ECE - 70 ADR warning sign at the rear, foldable Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Frame Hot-dip galvanized or painted according to customer specifications

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,250 kg, maximum load weight: 14,750 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 1,250 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with central-axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy 20"-based arms for 7.15 m, 7.45 m, and 7.82 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) 1 pair of front transmission support legs, with straight lower section and single-side operation on the right rear 1 pair of transmission support legs at the rear, with straight lower section and single-side operation on the right side 2 wheel chocks with holders Aluminum side impact protection Side impact protection set inward, for optimal clearance to the swap body supports Steel underrun protection Rear mud flaps across the entire width Half-shell fenders Mud flaps Csdpfozd Udcex Aptorg *Towing Equipment for Central-Axle Trailers Towing beam with certified 50 mm tow eye, freight carrier version Flat flange plate for tractors with a clearance-type low-bed trailer, connected to the towing beam at the top and bottom Towing beam clamped/bolted, easily replaceable, and partially adjustable in length! Lower coupler drawbar, free drawbar length approx. 2200 mm Fold-down bracket with spring assistance on the drawbar, for routing the connection cables to the truck *Axles + Suspension BPW disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake system 2-line compressed air brake system Color-coded wiring for easy servicing. Air reservoir: 208 liters Air-spring parking brake, Control panel at the rear right Duomatic connection at the front, with connecting line to the tractor unit, connection at the rear right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection at the rear right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift and lower valve, hold function in both lower and lift positions Vehicle - Vehicle Stability Control System *Wheels and Tires 385/65 R22.5" Manufacturer's choice Steel rims, factory silver *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting Connectors for electrical and air connections on the drawbar 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection at FR-right 2 additional LED work lights, recessed and integrated into the rear, activated via the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of Registration/License Plates Germany With DEKRA approval and certification (per §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Warning sign per ECE - 70 Night parking sign front and rear Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Frame Hot-dip galvanized or painted according to customer specifications

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 14,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,970 mm, total width: 2,550 mm, total height: 1,250 mm, suspension: air, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis for central-axle trailer Fine-grained steel welded construction Front stop, transverse, in a foldable/adjustable design, as previously delivered with AU 257359 1 pair of removable guide rollers, front and rear 1 additional pair of removable guide rollers 4 container locks with sturdy arms based on 20" for swap bodies 7.45 m and 7.82 m 1 pair of front transmission support legs, with straight lower section and single-side operation on the right side 1 pair of rear transmission support legs, with straight lower section and single-side operation on the right side (FR) Side impact protection set inward, for optimal clearance to the swap body supports Steel underrun protection *Towing equipment for central-axle trailers Towing beam with certified 50 mm tow eye, freight forwarding version Flat flange plate for tractors with underrun-protected LBW, connected to the drawbar at the top and bottom Drawbar clamped/bolted, easily replaceable and partially adjustable in length! Under-coupler drawbar, free drawbar length approx. 2150 mm Folding bracket with spring support on the drawbar, for routing the connection cables to the truck *Axles + Suspension SAF or BPW disc brake axles “Laser-aligned axles/chassis” reduces tire wear and fuel consumption Travel odometer/odometer Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Air reservoir: 208 liters Spring-loaded parking brake, Control panel in the front right Duomatic connection at the front, with connecting line to the tractor unit, connection in the front right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection in the front right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve, hold function in both lower and lift positions Vehicle – Vehicle Stability Control System Brake release function via a pushbutton on the vehicle next to the lift & lower valve, for releasing the brake when coupled; EBS power supply must be ensured! “TPMS” Tire Pressure Monitoring System according to ECE R 141, display in the towing vehicle via EBS *Wheels and Tires 385/65 R22.5" steel rims, factory silver *Electrical System 24 volts, multi-chamber LED lights, yellow LED side lights, LED license plate lights, (Note: With certain towing vehicles, false diagnostic errors may occur even though the system is functioning properly) Yellow LED side lights linked to the turn signals “Flashing side lights” Parking sockets for electrical and air connections on the drawbar 2 white LED front position lights 2 white/red LED rear lane-keeping lights Codpfszd U I Usx Aptorg 1 x 15-pin connector at the front, with connecting cable, located on the right rear 2 additional LED work lights, recessed and integrated into the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Prepared for single-line license plate holder Night parking sign at front and rear *Paint Finish Frame Hot-dip galvanized or painted according to customer preference

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,500 kg, maximum load weight: 15,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,260 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Fliegl “V-Stream” frame Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy 20"-based arms for 7.15- and 7.45-meter swap bodies Note! Not suitable for 20" containers, or only possible if the container has a tunnel or opening at the front center approximately 200 mm long and 800 mm wide! Credpfozd U Uusx Aptsg Swivel frame with heavy-duty ball bearing swivel ring 2 wheel chocks with holders Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Half-shell fenders Rear mud flaps across the entire width *Trailer Coupling Device (Turntable) Towing fork with certified 40 mm tow eye Spring-loaded towing fork height adjustment *Axles + Suspension SAF disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system; color-coded lines for easy servicing. Air reservoir: 208 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Brake System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions *Wheels and Tires 385/65 R22.5" Manufacturer’s choice Steel rims, factory silver, ET 120 *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof connectors at the front, with connecting cable, 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear *Paint finish Frame Hot-dip galvanized or painted according to customer specifications Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: new, maximum load weight: 35,510 kg, overall weight: 43,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross members, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as UNP profile, wear plate approx. 8 mm, goose neck height front approx. 130 mm Fifth wheel coupling: * 2-inch kingpin Underrun protection: * Bolted design, according to EC Side impact protection: * According to EC, made of aluminum profiles, anodized Kingpin supports: * 2 x 12 t kingpin supports with leveling foot and one-sided operation on the right side Axles: * 3 x 9 t air suspension axle, manufacturer SAF, disc brakes 22.5" * Total stroke approx. 180 mm, raising and lowering device via rotary slide valve Braking system: * Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front cross member, without connection line to the towing vehicle Tires: * 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice * Tire pressure monitoring system (TPMS) via CAN-bus system of the EBS Fenders: * According to EC Spare wheel holder: * None Load securing: * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * In the outer frame, holes approx. every 400-600 mm for attaching lashing straps Front wall: * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm screen-printed flooring (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame with galvanized omega steel profiles Crodpfx Apszhd Ncjteg Lighting: * According to EC, 24 volts, with multi-chamber lights, LED side marker lights, LED position lights white front, LED outline lights rear, license plate lights * Lane-keeping lights LED * 1x15- and 2x7-pole connector sockets on the front cross member Equipment: * Warning signs ECE 70 * Holder for rotating beacon, including rotating beacon * Foldable and extendable access ladder at the rear right (without platform) * 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Painting: * Front wall: RAL 5010 azure blue * Chassis: Hot-dip galvanized * Outer frame: Hot-dip galvanized + RAL 5010 azure blue * Crossbars: RAL 5010 azure blue * Kingpin supports: Aluminum, anodized * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanized/KTL black * Rims: silver Accessories: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of crossbar pockets in the outer frame, evenly distributed * 4 rows of crossbar pockets transverse to the loading area * 20 pieces of crossbars made of galvanized tube 80/50, total length approx. 1,200 mm * Inside on the front wall, a magazine for 20 pieces of plug-in crossbars * 5 x 25 mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable crossbars * Side board magazine under the chassis left and right * Sliding rails for side boards * Container locks for 1 x 40" and 2 x 20" containers, flush at the rear * Containe

Condition: new, maximum load weight: 45,115 kg, overall weight: 53,000 kg, axle configuration: 3 axles, Equipment: ABS, More vehicles can be found at [website address]. Excerpt from the equipment list. Complete equipment list available upon request. Loading area: Loading area with approximately 30 mm thick hardwood flooring. 8 pairs of lashing rings that can be folded outwards (LC 10,000 daN). Kingpin: JOST kingpins (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 tons (approx. 50 tons test load). Tires: 385/65 R 22.5. TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Axles and suspension: BPW axles, technically rated at 10,000 kg each. 1st and 3rd axles are hydro-mechanically forced-steered and mounted on a turntable. 2nd axle is fixed. Air-suspended with lifting and lowering valve. Axle spanner. Braking system: Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit. Electrical system: Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098. Steel structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa). Cjdpfx Ajzhd Niepterg Painting: Complete steel structure automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red according to the RAL 841GL system. Rear part is metallic and painted in RAL 9010 (pure white). Rims in silver. Coating tested in a salt spray test according to ISO 9227-NSS. Sealing of cavities with special wax. Accessories: Loading area with approximately 30 mm thick hardwood flooring. 2-inch kingpin. One galvanized steel front panel (EN12642-XL), approximately 1,200 mm high. Yellow-red air couplings on the galvanized front connection bar. 4 pieces of wheel chocks with holders on the front panel. Storage for approximately 1,000 mm lashing bars in the rear central beam. On the gooseneck and rear panel, one holder each on the left and right sides for warning signs including a socket. Yellow reflector tape according to EU regulations on the side and rear of the trailer. 10 pairs of lashing bar pockets for lashing bars approximately 100 x 50 mm in the outer frame of the loading area. European reflector signs (red-yellow) on the rear of the trailer. One holder for a rotating beacon on the rear of the trailer. One mud flap on the rear of the trailer. Manual and description on a USB stick. Speed stickers 80 km/h on the rear and both sides. Electro-hydraulic unit. 1 maneuvering coupling with reinforcement bolted to the end cross member. Load manometer for determining the axle loads including a load diagram. Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and a removable guard around the pump. Follow-up steering from the front and rear using a cable remote control via push buttons, with single-axle steering control (without installation in the tractor unit). 7 pairs of galvanized lashing bars approximately 100 x 50 mm, approximately 1,000 mm high. 4 pairs of lashing bar strip rails, mounted transversely in the loading area, for las

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 1,850 kg, maximum load weight: 8,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 3,100 mm, loading space width: 1,740 mm, total length: 4,900 mm, total width: 2,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. Cjdpfozhfzgjx Aptsrg ### Chassis – Tandem Low-Bed Trailer for Skip Containers * High-tensile steel welded chassis construction * 1 pair of adjustable and removable skip container locking wedges * 1 pair positioned in front of the container * Lashing rails for skip containers on both sides of the body * Front jockey wheel * Steel mudguards covering both wheels * Aluminium side underrun protection * 2 wheel chocks with holders * Recessed rear storage compartment integrated into the floor, approx. 650 × 240 × 240 mm (W × L × D), with slightly raised lid ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * 2 Euro axles (manufacturer's choice) with tapered roller bearings and S-cam drum brakes * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Parabolic leaf suspension with maintenance-free steel-rubber bushings and mechanical load equalisation (walking beam system) ### Wheels & Tyres * 235/75 R 17.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * 24 V ABS and automatic load-dependent braking (ALB), with front ABS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 × 7-pin non-interchangeable front connectors with connecting cable ### Low-Bed Body (TTS) * Low-profile steel well body * Steel floor plate * Steel side walls fully welded to the floor for maximum durability Note: Minor floor distortion caused by the welding process is technically normal. ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis painted in customer's colour * Drawbar painted to match the chassis --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: used, mileage: 1,48,380 km, power: 140 kW (190.35 HP), first registration: 07/2018, fuel type: diesel, overall weight: 3,200 kg, fuel: diesel, energy efficiency: C, CO₂ emissions: 199 g/km, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 6.7 l/100km, fuel consumption (combined): 7.5 l/100km, color: silver, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 5, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, E07 Hill-Start Assist, EJ9 COMAND Online, Q50 Trailer coupling with removable ball head, JP4 Lane Keeping Package, JA7 Blind Spot Assist, EY5 Mercedes-Benz emergency call system, BS1 Brake calipers with Mercedes-Benz lettering, EY4 Remote Online, G42 7G-TRONIC PLUS, CM2 Bumpers and trim painted in vehicle color, FS5 Illuminated mirrors for sun visors, FC1 Electronic key in chrome finish, JK5 Instrument cluster with color display, LG2 LED Intelligent Light System, LG4 Tail, brake and turn signal lights in LED technology, RK1 Tires 245/45 R19, EZ5 Parking Package, XO7 Mercedes-Benz Mobilo with roadside assistance and extended warranty, SE5 Lumbar support for driver's seat, EZ7 Active Parking Assist, SE4 Lumbar support for passenger's seat, QA4 Towing capacity 2500 kg, T70 Childproof locks on doors in the passenger compartment, ZC6 Sales code 1, T74 Grab handle for entry, HH4 Automatic climate control THERMOTRONIC, UR1 Seat rail system with quick-release mechanism, V33 Carpet in the rear, RL3 Light alloy wheels 8 J x 19, V36 Headliner, E1D Digital radio (DAB), Y10 First-aid kit, MJ8 ECO Start-Stop function, IB6 Model series C447 Vito/V-Class, HY1 Remote control for auxiliary hot water heater, ES3 12V sockets for rear seat rows on the right and left, ES2 12V socket in the trunk/cargo area, VD5 Interior headliner crystal gray, H00 Hot air duct to the passenger compartment, MS1 TEMPOMAT (cruise control), IK3 Luxury station wagon, HI1 Climate zone 1 (cold/comfort), W64 Rear window that can be opened separately, US4 3-seater comfort bench seat EASY-ENTRY in the 1st row in the rear, V44 Carpet in the vehicle interior at the front, RM4 Comfort tires, W68 EASY-PACK tailgate, Z42 Approved as a passenger car, LA2 Headlamp Assist, RM7 Summer tires, HZ0 Auxiliary heater electric, HZ7 Air conditioning semi-automatic controlled TEMPMATIC in the rear, E34. We are available by phone Monday - Friday until 8:00 PM and Saturday until 4:00 PM!! Furthermore:!! Leasing/financing and trade-in possible!! !! !! -Errors and prior sales excepted!! -All information without guarantee ... more on our website Crodjzt R Atjpfx Aptog

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: unknown Load to be transported: unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections. Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Credpsxrtluefx Aptsg Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. For rental or sale EU-wide.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,802 h, functionality: fully functional, machine/vehicle number: 12230000107, spindle speed (max.): 10,000 rpm, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl, laser power: 100 W, Highly accurate 5-axis milling, laser texturing, and laser paint removal on a precision machine! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 650 mm Travel range Z-axis: 560 mm Credpfx Apszcxwretsg Main spindle speed range: 20 - 10,000 rpm Main spindle drive power: 13 / 9 kW Torque: max. 83 / 57 Nm Tool holder: HSK A63 according to DIN 69893 Table clamping surface: 800 x 650 mm Table load capacity: max. 600 kg Swivel range B-axis: ± 120° Rotational range C-axis: 360° T-slots: 9 x 14 x 63 mm Workpiece dimensions: max. 650 (840) x 500 mm Number of tool positions: 30 Tool weight: max. 6 kg Tool diameter: max. 80 mm Tool diameter with free neighboring pocket: max. 160 mm Tool length: max. 315 mm Tool change time (tool to tool): 1.6 s Tool change time (chip to chip): 8.0 s Rapid traverse: 40 m/min Feed force: 7 / 13 / 10 kN Feed rate: 1 - 40,000 mm/min MACHINE DETAILS Control system: Siemens 840D sl Axes: 5 Total power consumption: 24 kVA Dimensions & Weight Footprint: approx. 4.5 x 3.5 x 2.3 m Machine weight: approx. 11.5 t Operating hours milling machine Spindle hours (according to counter): 4,738 h Power-on hours (according to counter): 18,703 h Operating hours laser Spindle hours (according to counter): 2,802 h Power-on hours (according to counter): 6,177 h EQUIPMENT Swiveling rotary table Laser head 100 W Coolant system Electronic handwheel Documentation

Condition: new, empty load weight: 2,810 kg, maximum load weight: 8,990 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,500 mm, total length: 8,120 mm, suspension: other, color: grey, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, - FLIEGL Tandem platform trailer TPS 118 with angled rear and ramps - New vehicle, delivery time upon request - Price: 21,900 EUR plus VAT - Fine-grained steel welded construction, hot-dip galvanized - 6 pairs of lashing eyes in the floor, each rated at 5 tons - Storage box - BPW drum brake axles - Parabolic suspension with maintenance-free steel/rubber/bearing system - 235/75R17.5 tires - Permissible total weight: 11,800 kg, unladen weight: 2,810 kg - Payload: 8,990 kg - Overall length: 8,080 mm, overall width: 2,550 mm - Internal platform dimensions: L 6,200 x W 2,550 - Loading height: 910 mm - Coupling height: 700 to 950 mm - Steel corrugated floor, hot-dip galvanized - Rear angle of approx. 900 mm - Aluminum front and side panels, 400 mm high - Center and corner posts removable - Steel ramps with wooden covering, L 2,300 x 510 mm, laterally adjustable - Gas spring supports for single-person operation - Reflective strips according to ECE R048, white on the sides, red at the rear - Axle and frame painted in DB7350 Novagrau - 10-year warranty against rust - Errors and prior sales excepted! - More information and additional photos on our website: ... VAT can be shown, ABS, new, HSN 7951, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban) Crodpfxezv Nrfe Aptjg

Condition: used, maximum load weight: 31,331 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2024, total length: 9,529 mm, total width: 2,470 mm, total height: 1,280 mm, Equipment: ABS, D-TEC Flexitrailer LS Axles / Tires: VALX axles with disc brakes, 430 ET 120 * 1st axle as a lift axle * Steel rims * Branded tires: Goodyear / Bridgestone / Continental * Tire size: 385/55 R22.5 * Geared support winch Attachments: Removable, hot-dip galvanized container guides at the front * Folding ADR sign at the rear * 2x wheel chocks * Blue mud flap Suitable for the following containers: 1x 20-foot container, flush at the rear * 2x 20-foot containers * 1x 30-foot container * 1x 40-foot container with tunnel Crjdpfxezuux Ij Apteg * 1x 40-foot HC container Lighting: 4x round rear lights * 2x LED work lights Painting / Chassis: Chassis top surface spray-galvanized * Chassis in RAL 9005 Deep Black We are happy to provide further information.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, DESCRIPTION: The KCK-1000-FCP-UC30 pressure chamber is a versatile device with a wide range of applications. It enables the following types of work: - Cleaning the surfaces of metal objects, - Removing: welding residues, scale, rust, oxides, surface deposits, and old paint coatings, - Deburring the edges of objects, - Achieving the desired surface roughness. Technical data: - Width: 1470 mm - Depth: 1600 mm - Height: 2140 mm - Working chamber: 950 × 880 × 880 mm - Abrasive circulation: pressure-fed Crsdpfx Ajzvdfaoptsg - Hand openings: 2 - Nozzle: boron carbide, ø 6 mm - Weight: approx. 300 kg - Lighting: fluorescent - Abrasive tank: 30 l - Air consumption: according to the manufacturer's table

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21801012535, empty load weight: 3,860 kg, maximum load weight: 14,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2026, next inspection (TÜV): 06/2027, loading space length: 7,750 mm, loading space width: 2,480 mm, loading space height: 1,200 mm, total length: 9,925 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: silver, Year of construction: 2026, Demonstration vehicle - Please note: images shown are archive photos. The vehicle may currently be in use! #Chassis – centre-axle trailer - Fine-grain steel welded construction - Outer frame slightly angled, new design, featuring a "Load Lock" profile for lashing strap attachment - 1 pair of geared landing legs front, semi-round base plate, shock-compensating foot, single-side operation, direction of travel right - 1 pair of geared landing legs rear, semi-round base plate, shock-compensating foot, single-side operation, direction of travel right - 2 wheel chocks with holder - Side impact protection, aluminium - Underrun protection, steel - Quarter-shell mudguards - 2 plastic tool boxes with drawer and insert shelf, w=650 / h=520 / d=670 mm, lockable with a padlock #Towing gear – centre-axle trailer - Drawbar with certified 50 mm towing eye, general haulage version - Lower coupling head on drawbar - Folding bracket with spring support on drawbar, guiding the connecting cables to the truck #Axles + suspension - SAF disc-brake axles, 430 mm disc diameter - "Axles/chassis laser-measured" reducing tyre wear and fuel consumption - Air suspension with lift & lower valve #Wheels and tyres - 385/65 R 22.5", manufacturer's choice - Steel rims, factory silver #Braking system - Two-line compressed-air braking system - Spring-loaded parking brake - Vehicle stability system - Duomatic connection front, with connecting line to towing vehicle, direction of travel right - EBS electronic braking system, EBS connector front with connecting cable #Electrics - 24V multi-chamber LED lights, yellow LED side marker lights, LED number plate light (note: false fault warnings possible with certain towing vehicles despite correct function) - 2 white position lights front - 2 white/red outline marker lights rear - 1x 15-pin plug front with connecting cable, direction of travel right - Reversing camera system, colour flat-screen monitor, wireless link, screen with suction-cup mount, powered via 24V vehicle socket #Floor - Phenolic-coated plywood, approx. 30 mm, high point-load capacity - Note: floor warping possible due to weather - "Premium floor sealing", sealed all round - Platform length approx. 7,750 mm #Front wall / front corner posts - 25 mm aluminium hollow-section, 1,950 mm high, corner posts steel, reinforced profile, +2 additional centre supports - Front wall internally lined with 1,250 mm high phenolic-coated plywood #Centre stakes - 2 pairs of folding stakes at side-board height, foldable and removable #Side boards - 25 mm aluminium hollow-section, 700 mm high, foldable and removable, without tarpaulin rail #Rear wall / rear corner posts - 1 pair of folding stakes at side-board height, foldable and removable - 25 mm aluminium hollow-section, 700 mm high, foldable and removable, with internal folding step #Country of registration / plates - Warning plate ECE-70 - Warning plate "A" for waste transport, foldable - ADR warning plate at rear, foldable Cedpfx Apjzw Ep Netsrg #Paint finish - Frame hot-dip galvanised incl. passivation - "15-year warranty against corrosion perforation"