Used Paint Sprayer for sale (4,204)

Condition: used, Year of construction: 2018, operating hours: 2,040 h, Makor Spraying Robot RoboSTAR M – 2018 Makor RoboSTAR M spraying robot, manufactured in 2018 and in good working condition. The machine has low operating hours and has been well maintained, making it an excellent option for automated spraying applications. Ideal for businesses looking to improve efficiency, consistency, and production capacity. Bdjdpfozw Hzaox Andsi

Condition: like new (used), Year of construction: 2011, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 111313, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: R-30iA, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended for painting blades for wind turbines. For this purpose, it was installed on a 60 m long rail, which had another rail with which the robot could travel up and down. For this reason, two large additional amplifiers are installed in the control system. This is why the encoder break module is also present twice. Another special feature of this robot is that motors are installed in the shoulder to control two gear pumps. So a 2-component mixture on the robot is no problem. Bdedpfx Astu Hpqsndsi The robot was never actually used. The operating hours only occurred because the robot was live. This was also confirmed to me by the operator of the system (Enercon). The actual servo ON time is 0.2 hours. The robot has slight soiling, but is practically as good as new. Unfortunately, the teach pendant and the teach cable are very dirty. However, this could be replaced if necessary. The cable length between the robot and controller is 5m and can be plugged into the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. We have two of them. The price is for one robot. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device can be inspected under voltage at Paintrobotics.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: lighting, For sale: a BUMEX brand dry paint booth, model TUXXYY, manufactured in 2019 and in perfect working order. This booth is designed for the application of lacquers and paints, both water-based and solvent-based, and complies with all European safety and quality regulations. Bodpez Riuzjfx Andjdi It is the ideal solution for automotive workshops, metalworking shops, or any industry requiring a professional and safe finish. It includes complete technical documentation (installation, safety, and maintenance manual) and a delivery protocol. Key technical features: - Brand: BUMEX (F.H.U.) - Model: TUXXYY (Dry paint booth) - Year of manufacture: 2019 - Total power: 2.0 - 3.5 kW - Supply voltage: 230/400 V (50 Hz) – Single-phase and three-phase - Protection rating: IP-65 (IP-56 in control cabinet) - Filtration system: Double-stage with Andrea paper filter and G4 fiber filter (PaintStop). - Extraction fan: Included for removing excess paint. - Construction: Galvanized sheet metal (stainless steel option available). - Regulatory compliance: ISO 9001:2015 certified, CE marking. - Applicable standards: PN-EN 12215, PN-EN 60204-1, PN-EN 1127-1 (safety in explosive atmospheres). Condition and maintenance: - Condition: Excellent condition. Operation verified. - Maintenance: Preventive maintenance has been performed according to the manufacturer's instructions (filter and electrical connection inspection). - Includes: Original documentation (Instruction Manual, Delivery Protocol), filters Important notes (according to the manual): - Requires installation in a location with adequate ventilation, a minimum temperature of +10°C, and effective grounding. - Designed for use in Zone 2 (potentially explosive atmospheres), complying with the required safety measures.

Condition: used, functionality: unexamined, 3x KREMLIN Airmix paint spraying/material pumps – 1x Type 17A + 2x Type 20-15 – with accessories Description: For sale is a package consisting of three professional KREMLIN Airmix paint spraying/material pumps from a former paint shop. The units were used for professional painting applications and are mounted on mobile or stationary units with corresponding accessories. Scope of supply: 1x KREMLIN Airmix Type 17A - KREMLIN pneumatic Airmix pump - Type plate: 17A - Translation according to type plate: 10:1 - Serial No.: 72989 - with material container - Pressure regulator - Pressure gauge - Hose set - mobile base 2x KREMLIN Airmix Type 20-15 - Type: 20-15 - one unit with visible serial no. 06E 1581 - each with pressure regulators and pressure gauges - Material container - Material and air hoses - Accessories as shown in the pictures - mounted on mobile units/cabinets The units have not been in operation for a longer period. A current functional test has not been carried out. Due to the prolonged period of inactivity, an inspection, cleaning, and possibly an overhaul of the pumps, seals, and valves should be performed before recommissioning. The units are therefore explicitly offered in their current condition and without testing. Technical documentation is still available for the KREMLIN 20-15; specific spare parts and repair parts such as repair kits and coupling parts are also still offered. Therefore, in addition to recommissioning, the pumps can also be used as a source of spare parts or as a spare parts package for existing KREMLIN Airmix systems. Location: 3608 Thun, Switzerland Availability: immediate Inspection: possible by appointment Bdodpjz Iuiqefx Andoi Sale: preferably as a complete package The sale is ex works, in the current condition, without warranty or guarantee. Subject to prior sale. Selling price: 1,450.00 EUR Price net, any applicable statutory taxes and duties are not included. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2016, operating hours: 10,000 h, functionality: fully functional, Complete painting system comprising two Cefla Flexispray spraying units and three Cross Oven drying ovens. The system was purchased new in 2016 and is customized for painting softwood interior door frames for the Dutch market. The system includes the following units: Cefla Cross Oven #1 Width 320 cm, length 300 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #1 Bdjdpfx Anjz Hbm Tedei Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #2 Width 320 cm, length 390 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #2 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #3 Width 570 cm, length 700 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. The painting system is installed at the factory and is available for a test run. The system is sold "as-is," and its dismantling, relocation, and transport are the buyer's responsibility. Sales price for the system is 120.000 EUR VAT 0% and is negotiable. If there are several buyers, we reserve rights to sell the system to the highest bidder.

Condition: used, Year of construction: 1997, functionality: fully functional, working width: 200 mm, working height: 100 mm, The device is designed for coating all types of profiles (e.g., baseboards, furniture trims, balustrade elements, etc.) in a continuous process. Its high operating speed will help optimize production processes. Important information: Year of manufacture: 1997 Without painting accessories Operating speed: up to 56.4 m/min ATEX extraction fan Max. element height: ~100 mm Max. element width: 200 mm Min. element length: ~850 mm Paint overflow collection tray in the form of a drawer Option to purchase used hydrodynamic painting accessories (in very good condition) from DURR – 4 Airmix guns + pump. Bodpfe Afk I Dsx Andjdi

Condition: like new (used), SHIPPING AVAILABLE 🚚 - Brand: Graco - Reference: X60DH3 - For general industry, paints, and contractors. - Maximum flow rate: 13.2 l/min (Output per cycle: 220 cc) - Xtreme Pump 60:1, cart-mounted - Maximum working pressure: 420 Bar - For high-viscosity paints, polyurethanes, enamels, etc. - Includes new hose, gun, and nozzle - New XTR7 Graco gun - New 15-meter, 500 Bar hose - New XHD519 Graco nozzle - Used product, fully inspected. - 1-year warranty Bedpfx Anoz D Tkxjdsdi - Shipping or in-store pickup available - VAT not included

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Oven for powder coating, with internal dimensions of 8200x1600x3600. Gas burner with a power output of 125-390 kW. Bdedozylxcspfx Andsi

Condition: used, Year of construction: 2018, This system consists of anautomatic spraying machine with part detectionand, in addition, a glass detection system. Roller conveyor is installed in front of and behind the machine. Technical data: Item 1 Roller conveyor - Manufacturer: Venjakob - VEN Trans - Year of manufacture: 2018 - Length: 1,200 mm - Width 1,438 mm - Working width 1,300 mm - Working height 940 mm ± 20 mm - Roller diameter 80 mm - All rollers with hose cover - Roller pitch 150 mm - Motor power 0.75 kW - Feed speed 0.7 – 3 m/min Bsdpo Aba U Eofx Andsdi via frequency inverter Item 2 Automatic spray painting machine - Manufacturer: Venjakob - Model: VENSPRAY Smart - Year of manufacture: 2018 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Control panel on the right - Suitable for solvent-based and water-based paints - Price for reconditioned machine - As-is condition, machine not overhauled - Spray gun drive in Duo configuration - Dry extraction - Extraction nozzle diameter 400 mm - Exhaust air flow rate 7,000 m³/h - Feed speed continuously variable ~ 1.5 – 4 m/min. - Light curtain, part detection type LS 25 and glass detection system - Touchscreen control - Paper belt transport system - 1 paint circuit installed - 1 pump stand - Air atomisation system - Number of paint pumps: 1 - Length: 3,630 mm - Width: 3,575 + 990 mm - Total power consumption: 13 kW - Paint finish: RAL 7035 light grey and 9005 black - Location: not in stock - Voltage fluctuations: max. +/- 5 % Item 3 Roller conveyor - Manufacturer: Venjakob - VEN Trans - Year of manufacture: 2018 - Length: 1,200 mm - Width: 1,438 mm - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Roller diameter: 80 mm - All rollers fitted with hose covers - Roller pitch: 150 mm - Motor power: 0.75 kW - Feed speed 0.7 – 3 m/min via frequency converter

Condition: used, Year of construction: 2020, Spray coating machine Manufacturer: Homag Type: PROFI GSF100/P/13 Year of manufacture: 2020 Technical data Spray machine for automated coating of furniture components, doors, stairs, and interior design elements with water-based or solvent-based paints. - Sled runner with a spray arm to accommodate four spray guns - Workpiece transport with a vacuum conveyor belt with additional paper support - Feed speed: 1 - 4.5 m/min Bdodo Adr Hxjpfx Andoi - Average coating speed: 1.5 - 2.5 m/min - Working height: 900 mm - Extraction volume: approx. 10,000 m³/h - Diameter of extraction nozzle: 350 mm - Electrical connection power (without additional equipment): 10 kW - Compressed air consumption (without spray application): approx. 150 nl/min Workpiece parameters Workpiece width: 100 - 1300 mm Workpiece length: 300 - 3000 mm (without additional workpiece support) Workpiece thickness: 5 - 60 mm Workpiece weight: max. 80 kg Workpiece material - Chipboard, MDF and HDF boards - Solid wood components - Lightweight panels - The difference in height between workpieces may be a maximum of 2 mm Coating material - Paint based on water or solvent Electrical parameters - Operating voltage 400 volts, 50 Hz Roller table for machine infeed/outfeed - Powered roller table for automatic transport of workpieces Mobile paper roll trolley - For quick changing of the unwinding paper roll Touchscreen operation - Machine operation is performed via a touchscreen control panel, which is ergonomically positioned on the operating side of the machine. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2007, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 82351, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem. The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. Bdjdpfxstu H Ave Andsi The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest. We would bring the device to us from Frankfurt.

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Technical data: Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load The painting booth has dimensions of 6 x 4 meters. Bodpfxsz D Evye Andsdi The system includes an exhaust duct with extraction via the roof. In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Dismantling will be carried out by the buyer.

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Bdodpfx Asy A Tpqondji Location: in stock at 54634 Bitburg - immediately available -

Year of construction: 2003, condition: used, A spray booth with air conditioning is offered. Equipped with glazed booth enclosure, access door, interior lighting, perforated floor panels, workpiece support and separate air conditioning unit. Technical specifications of the associated air conditioning unit: Supply air volume flow rate: 9000m³/h, exhaust air volume flow rate: 9000m³/h, external static pressure of supply air: 360Pa, heating medium temperatures: 60/40°C, cooling capacity: 51kW, heat recovery capacity: 75.8kW, filter classes: F5/F7, refrigerant: R407C. Air conditioning unit control system: Weiss Technik Process Control 2. Inspection possible by arrangement. Bdedpfx Ano Ahi S Hjdji

Year of construction: 2023, operating hours: 16 h, condition: like new (used), functionality: fully functional, GCV Glass Picasso V2 260 glass painting machine, year of manufacture 2023, condition - as new. AUTOMATIC PAINTING MACHINE GCV Picasso-V2 260 Max. Glass Width (mm): 2600mm Bdjdpfx Anezhagkedoi Max. Glass Length (mm): unlimited Max. Glass Weight (kg): 600 kg Min. Glass Size * Width * Length (mm): W 220mm * D 900mm (single panel size) ADDITIONAL PRODUCTION EQUIPMENT 1 pc. transport table, equipped with wheels 1 pc. large stand for drying and storage portable sample boards with color palettes Mixer with pigment stand, Number of containers: 24, Container volume: 2.3 l

Condition: used, Year of construction: 2000, power: 157 kW (213.46 HP), Equipment: all wheel drive, cabin, More data and images will follow! More photos and details coming soon! -----Internal vehicle number: 12255 Bsdpfx Aew Nfb Rondedi Errors and prior sale excepted.

Condition: like new (used), functionality: fully functional, Year of construction: 2006, For sale is a Strojstav MPCS 4 dry shotcrete and guniting machine that has never been used and is in like-new condition (Year of manufacture: 2006). This high-performance machine has 0 operating hours and has been stored securely, offering the build quality and performance of a brand-new machine at a highly competitive price. It is designed for transporting and applying dry concrete mixtures and refractory materials. Technical Specifications & Features: Condition: Like new / Never used (0 operating hours) Year of Manufacture: 2006 Application Method: Dry shotcrete / guniting (pneumatic dry conveying) Feeding Options: Supports standard bagged materials or large-volume Big-Bags using an auxiliary feeding frame. Mobility & Chassis: Heavy-duty wheels with a front-steered twin-axle system for easy manual positioning on-site. Control System: Integrated, user-friendly control station directly on the machine for safe and precise operation. Bedpfx Ansz Akvrodjdi

Condition: excellent (used), Paint mist extraction unit, ALKO spray wall Increased flexibility thanks to extraction technology with a frontal plate system Bjdpfx Ansy Dpfwjdjdi Motor data: 0.75 / 2.1 kW ex/ 400 V / 50 Hz Speed: 950 / 1,420 rpm Airflow: 3,000 / 6,800 m3/h Dimensions (W/H/D): 1,912 x 1,405 x 943 mm with side panels extended: 2,971 x 1,405 x 1,215 mm Filter surface: 2 m2 Weight: 248 kg Condition: very good

Condition: new, functionality: fully functional, total height: 74 mm, total length: 63 mm, total width: 51 mm, overall weight: 43 kg, Husky 1590 SS Air-Operated Double Diaphragm Metal Pump, SS/PT Product number DB4311 - 199 The Stainless Steel + PTFE combination offers universal chemical compatibility and allows working with low to medium/high viscosity products: Solvents and Alcohols: Acetone, MEK, toluene, xylene, ethanol, methanol, isopropyl alcohol. Acids and Bases: Nitric acid, phosphoric acid, diluted sulfuric acid, caustic soda, alkaline solutions. Resins and Adhesives: Epoxy resins, polyurethanes, solvent-based or water-based adhesives. Inks and Paints: Industrial paints, enamels, lacquers, flexographic and gravure inks. Sanitary/CIP Chemicals: Concentrated detergents, industrial disinfectants, deionized water. - Chemical and Petrochemical Industry: Processing and transfer of reagents, solvents, acids, and alkalis in the plant. - Pharmaceutical and Cosmeceutical: Loading, mixing, and dispensing of raw materials and finished products. - Food and Beverage (auxiliary processes): Transfer of concentrates, flavorings, additives, and CIP (Clean-in-Place) cleaning that require aggressive chemicals. - Paints, Inks, and Coatings: Handling of resins, cleaning solvents, printing inks, and corrosive enamels. - Water and Industrial Treatment: Dispensing of flocculants, chemical neutralizers, and aggressive waste fluids. Features - Diaphragm life up to 5 times longer compared to other pneumatic diaphragm pumps in its class. - Wide range of materials to suit a multitude of applications. - Fewer parts than the competition; the pneumatic valve is accessible from the outside, allowing for quick and easy maintenance without disassembling the diaphragm pump. - Available in ATEX configuration. - 1-1/2 inch (38.1 mm) ANSI end connections. - High flow rate: 100 gpm (378 lpm) in a compact and portable size. - Fluid pressure up to 120 psi (8.4 bar, 0.84 MPa). - Lubrication-free operation. - Available in polypropylene, aluminum, and stainless steel. - Pneumatic section with epoxy coating for harsh environmental conditions. Technical Specifications Air inlet diameter (inches) 1/2 Fluid outlet thread type: Female Fluid outlet diameter (mm) 38.1 Maximum air consumption (SCFM) 125 Maximum air pressure (bar) 8.27 Fluid inlet thread type Female Fluid inlet diameter (mm) 38.1 Maximum flow rate (L/min) 379 Maximum fluid pressure (bar) 8.27 Fluid inlet size (in.) 37257 Maximum operating temperature (°C) 66 Maximum operating temperature (°F) 150 Maximum solid particle size (cm) 0.4763 Maximum solid particle size (in.) 0.1875 Maximum solid particle size (mm) 4763 Husky Model diaphragm_compatible_material PTFE Air inlet thread type Female Bsdpfx Ansz Snr Uedodi Maximum air pressure (psi) 120 Maximum cycle frequency (CPM) 200 Maximum fluid pressure (psi) 120 VAT NOT INCLUDED

Condition: used, Year of construction: 2007, operating hours: 20,000 h, functionality: fully functional, total height: 1,800 mm, total length: 1,000 mm, total width: 1,200 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 6 m/min, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 50 mm, We offer this used DIMA (Selective Protective Coating Machine) Hybrid Coating System HC-200, manufactured in 2007. Sale is ex works. Operating hours: 20,000 h, machine is operational. If you have any questions or require further information, please send us a message or call us. On-site inspection is welcome. Technical data: Type: HC-200 Selective protective coating machine Dimensions (L x W x H): 1000 x 1200 x 1800 mm (+500 mm for signal light) Stepper motor in combination with encoder, with ball screw and linear guide and spline axis XY speed 0.2 m/s Z-axis speed 0.1 m/s XYZ resolution 0.00625 mm Resolution of the rotary axis 0.036° Bdedez Ix R Espfx Andji Rotation 370 degrees Working area (based on a valve on the Z-slide) 600 x 600 mm – Z-movement 50 mm Inline chain conveyor 500 x 600 mm – Z-movement 50 mm Inline belt conveyor with clamping 525 x 600 mm – Z-movement 50 mm Min./Max. conveyor width (chain): 35 mm / 500 mm (manually adjustable) 35 mm / 500 mm (automatically adjustable) Min./Max. conveyor width (belt): 35 mm / 500 mm

Condition: good (used), Year of construction: 2009, For sale GIARDINA MOS/4PLUS paint line Bdsdpfxjtxnp Ne Andoi

Condition: new, functionality: fully functional, total height: 48 mm, total length: 150 mm, total width: 42 mm, overall weight: 68 kg, Dura-Flo NXT 2-ball piston pump, 15:1, low-noise air motor, CS, 3 PTFE seals / 2 leather seals Product number: P15LCD - 076A Graco's Dura-Flo pumps with NXT technology provide a smooth and easily controlled flow. Ideal for dispensing applications, these durable pumps feature an NXT motor and can now achieve an even higher pressure range without compromising flow rate. - General industry - Application: Painting, Bonding, Sealing, PVC, Grouting, Encapsulation, Molding, Discharging, Filling in case of material shortage Bjdsz Sniuspfx Andodi Features The 2-ball piston design and positive displacement provide a smooth and easily controlled flow. Excellent flow and pressure performance to handle a wide range of paints and coatings. Improved service performance with fewer parts, faster repairs, and lower ownership costs. Technical specifications Fluid outlet size (mm) 38.1 Fluid outlet thread gender: Female Includes: Carbon steel pump, low-noise air motor, 3 PTFE seals / 2 leather seals Maximum air inlet pressure (bar) 6.9 Maximum air inlet pressure (kPa) 690 Maximum air inlet pressure (psi) 100 Maximum continuous cycle speed (CPM) 60 Maximum flow rate (L/min) 26.12 Maximum operating temperature (°C) 66 Maximum operating temperature (°F) 150 Maximum working pressure (bar) 109 Maximum working pressure (kPa) 10900 Maximum working pressure (psi) 1580 Model: Dura-Flo Mounting: Wall or stand Not portable Series: 2-Ball Maximum working pressure (MPa) 10.9 VAT not included.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2433380060, overall weight: 176 kg, nominal power: 0.75 kW (1.02 HP), rotational speed (max.): 950 rpm, protection type (IP code): IP54, The devices in the COLOUR JET series are optimally designed for extracting paint mist and solvents at wet painting workstations. The front guide plate ensures that the mist is captured from below and at the side inlets, as solvents from paints settle and collect near the floor. At the same time, the guide plate enables uniform air distribution over the filter and protects the filter medium from direct exposure. Paint pigments are separated by the large-area replaceable filter, and the cleaned exhaust air is then discharged to the outside via a pipe or hose. Bedpfx Anozkgwnsdjdi Dimensions (W x D x H) in mm: 1,012 x 1,405 x 943

Condition: good (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 40 kg, CABO Mixspace Multispeed Paint Mixer Gyroscopic Mixer (gyromixer) Year of manufacture: 2015 Display Alphanumeric 20 x 4 Maximum bucket weight 40 kg Bucket holder tray Pull-out Bucket gripper Automatic Gyroscopic ratio 1:1.8 Bdedpfxovmtw Rj Andei Speed ​​settings 3 programmable Mixing speed 80 - 180 rpm Acceleration / deceleration during the mixing cycle Automatic speed adjustment to the bucket height Mixing cycle time 20sec - 30m Maximum bucket diameter 380 mm Bucket height: min - max 90 - 490 mm Bucket height 340 (+30) mm Bucket types Round/Square/Oval Mains voltage: 230v 50Hz 3A Machine weight 190 kg machine dimensions: width:860mm length:850mm height:1150mm

Condition: like new (used), Year of construction: 2011, functionality: fully functional, volume flow: 2,30,000 m³/h, nominal power (apparent): 22 kVA, For sale: filter for removing haze from paint. Fine dust filter. Bsdezhbqqepfx Andjdi