Used Paper Printing for sale (7,578)

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. Hfedpfxohg Rcxo Adwsk The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Hfsdpfjvy Aipex Adwek Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, The Massivit 5000 3D printer enables ultra-fast custom manufacturing for both the visual communication market and industrial sectors such as the automotive, aerospace, railway, and marine industries. Equipped with a dual-material system and two printheads, the M5000 allows you not only to print two different objects but also to print with two different materials simultaneously. The extraordinary build volume of 145 x 111 x 180 cm enables the production of full-scale parts in no time. Large, complex forms are no challenge for this machine. Hfedpfx Aexwpvgodwek Furthermore, a variety of materials is available for the machine.

Condition: ready for operation (used), Various Pad Printing Machines | Industrial Pad Printers | €2000 Each Selection of pad printing machines available – ideal for small parts, promotional items, and industrial marking. Hjdpfsyz T Hgox Adwjfk 🔧 Details: Multiple pad printing machines in stock Suitable for plastics, metals, and promotional products Simple and reliable operation 💶 Price: €2000 each

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Hfjdpeya Hvqefx Adwek Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Auction of a Kornit Allegro textile printer! The machine is still operational and available for inspection in the Greater Paderborn area until calendar week 30. After disassembly in calendar week 30, the machine will be stored. The machine will be made available for free loading in the Greater Wuppertal area. EQUIPMENT ACS dryer Material feed Material take-up Caldera RIP software The following technical data is based on the manufacturer's specifications. The seller cannot guarantee its accuracy. TECHNICAL DETAILS Max. media thickness: 15 mm Max. roll width: 180 cm Max. roll outer diameter: 40 cm Max. roll weight: 50 kg Compressed air: 6-8 bar / < 0.4 m³/min MACHINE DETAILS Ink type: Kornit NeoPigment Intenso, water-based Ink capacity: 4 liters Colors: Black, Red, Green, Gray, Cyan, Magenta, Yellow Print heads: 64 x Spectra Polaris, recirculating - (7 color channels, 1 channel for pretreatment) Print width up to 180 cm Print speed: Up to 200 m²/hour Resolution: 400-1200 dpi Recommended print mode: 600 x 600 dpi in 6 passes using staggered line printing Power supply: 110/220V, 60/50 Hz, 40A, 3Ph+N+GND 25kW Media transport: High-precision, adhesive belt conveyor system Fabric feeding system: Axial unwinding device with adjustable fabric width and tensioning mechanisms Hjdpfxozquife Adwjfk Weight: 3500 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 5 offset + 1 Rhino + 1 Offset +1 Flexo + 1 FP4 + 1 Screen Hfsdpfozr E Nxsx Adwjk

Condition: good (used), Automatic cloth rewinder for offset printing machines Manufacturer: Vliesstoff Kasper Very good condition. 380V power supply, foot pedal control Hedpfxozuryio Adwjfk Device suitable for B1 and B2 format machines

Condition: used, Year of construction: 2009, functionality: fully functional, Horizon HT-30 (2009) – USED Type: Three-side Trimmer Language: Japanese Total Counter: 1743573 Technical Specifications • Untrimmed Book Size (Max./Min.): 320 × 235 mm / 200 × 134 mm • Finished Book Size (Max./Min.): 305 × 230 mm / 200 × 134 mm  – Minimum finished size with the optional cutting table (cutting module): 148 × 134 mm • Trimming Width: 2.0 – 99.9 mm Hsdpfxjztlyyj Adwefk • Trim Thickness: Max. 51 mm • Book Stack Height: Max. 300 mm • Production Speed:  – Up to 440 books/hour (25 mm thick, 2 books stacked)  – Up to 500 books/hour (10 mm thick, 5 books stacked) • Power Requirement: 3-Phase 200 V, 50/60 Hz

Condition: good (used), Ideal 5222 Digicut Hydraulic Guillotine The machine is 100% functional and has been serviced. This model has the most extensive equipment. The machine was purchased from a government office. Technical specifications: Working width: 520mm Stack height: 80mm Minimum remnant: 22mm Maximum distance from the saddle to the knife: 520mm 230V power supply Key features: The machine has a full EP programmer with the ability to save individual steps to memory. Hydraulic pressure beam drive, fully adjustable pressure from 200-1100N Electromechanical knife and saddle drive Automatic pressure synchronized with the knife’s cutting movement Electronically controlled saddle adjustment knob with adjustable speed Side tables Photocells „SCS” safety system, including: Electronically controlled two-handed cutting start Automatic knife return from any position Transparent cover on the rear table Laser cutting indicator Hfodpfx Aszt H Tzodwsk Additional equipment includes: spare knife, cutting sticks, tool kit, paper stack tapping device, safe knife change device, and documentation.

Condition: good (used), Adast Maxima MS 58S Guillotine The machine is fully operational, in excellent technical and visual condition. It has just been serviced. The set includes a spare knife, cutting stick, paper stacker, and tools. Technical specifications: Hfsdjzt H Sqjpfx Adwek Working width: 580mm Stack height: 85mm Power supply: 380V Weight: 450kg All key components are made of cast iron, including a flywheel and adjustable pressure force – this is a professional production guillotine in a compact design. Electronic approach controller, cutting line, and safety guards.

Condition: good (used), Polar Mohr R-2 Paper Jogger Hedpfx Adozt H N Njwefk Machine in very good condition, lightly used. Technical specifications: Maximum format: 820x720mm Stack height: 150mm Weight: 450kg Power supply: 400V Air table Right/left shaking option Tilt angle adjustment Jogging frequency adjustment (inverter) Chrome table surface Pneumatically controlled flaps

Condition: good (used), Nagel Citoborma 180 Paper Drill This machine is 100% functional. This is the latest model. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill has an automatic table lock that releases after each cycle. Very good condition. Solid construction – weight 65 kg. 230V power supply One drilling head. Hedpfx Adozt H N Aewofk Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Hjdpfx Adsztz Elewefk Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Condition: good (used), Paper cutting guillotine Perfecta 76 TVC Device in perfect condition, very low mileage. After general renovation in 2013. Technical data: Cutting width: 760 mm Stack height: 110 mm Weight: 1650 kg Power supply: 400 V Equipment: – programmer with touch screen – photocells – air table – cutting line – chrome table surface – enlarged side tables – hydraulic clamp with smooth force regulation – instructions – full set of tools – plate for clamp – tapping block Hodpfjztz Efex Adwjfk – spare knife

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Hsdpfx Asztz D Iodwefk Load capacity: 600 kg. Pallet/sheet dimensions: 760 x 1090 mm

Condition: good (used), Paper guillotine EBA 5260 The machine is 100% functional, after inspection in very good condition. Hsdpfxjztn Igs Adwofk This is the currently produced, newest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max. distance of the saddle from the knife: 520mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromagnetic knife and pressure beam drive Photocells laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: good (used), Durselen PB 16A four-head paper drill The device is in perfect condition, like new! This is the newest one. currently produced model. Production Germany. Four drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system. Sliding work table. Automatic column system – a belt that is moved to the next position when worn out Technical data: Drill diameter: 2-16 mm, Stack height: 50 mm, weight: 300 kg Hodpfxoztn D Is Adwsfk Power supply 380V Automatic drilling cycle, controlled by a foot pedal. Smooth regulation of spindle speed and lowering speed of heads on inverters. Solid construction on a pedestal. Waste is directed to the built-in bin Drill table adjustable in every plane, front and side margins. The set includes operating tools and drills.

Condition: good (used), HANG 114-00/4 paper drill The device is in very good condition. This is the latest product of the hang brand. The highest class of machines among drilling machines.. Waste directed to an external container. Controlled by an electric foot switch. Each head is independently adjustable, which allows the use of drills of different lengths. Hfjdeztn Duopfx Adwjk Technical data: number of drilling heads: 4 drill diameter: 3-10mm stack height: 65mm drill spacing max260mm drill speed: 1500 rpm two table lifting speeds table dimensions: 600x480mm Power supply: 400V Weight: 400kg The machine has documentation, operating tools and drills.

Condition: good (used), Hang 117-01 paper drill The device is in perfect condition, 100% functional. The highest class of machines among drilling machines. Each head is independently adjustable, which allows the use of drills of different lengths. Drill table adjustable in every plane, with a lock. The spacing of the heads is adjustable with a crank. Waste directed to an external container. Two operating speeds: 950 and 1900 rpm Hedpfx Adjztn Dbewofk Technical data: number of drilling heads: 2 diameter of lights: 3-10mm stack height: 60mm drill spacing min: 45mm / max 160mm table dimensions: 780x430mm Weight: 100kg Power supply 380V The machine has documentation, maintenance tools, drills, and a new column

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Very good Polar 66 paper cutting machine with a 67 cm cutting width. Stack height: 8 cm. Fully hydraulic paper cutting machine. Hjdpfszulvksx Adwefk Hydraulic pressure continuously adjustable from 200 daN to 1500 daN. Programming function. Safety light curtain. Weight: 620 kg. Dimensions: 125 x 182.5 x 151.5 cm. Electrical connection: 400 V / 50 Hz. Includes 2 blades, tools, and documentation.

Condition: good (used), Year of construction: 2004, functionality: fully functional, NATGRAPH UV DRYER Automatic Stacker: NATGRAPH Raised Hfjdpjy Twkmofx Adwok Fully Cleaned

Condition: good (used), Year of construction: 2008, Mabeg Feeder SPS UV2 + C: UV Drying tunnel with material cooling Hfsdpfx Ajw Eb Uajdwok Automatic Stacker: SPS AUTOSTACK 2

Condition: good (used), Year of construction: 2006, functionality: fully functional, Stack cutter IDEAL 5221-05 Digicut with hydraulic clamping Year of manufacture: 2006, machine fully functional and well-maintained 52 cm cutting width 8 cm working height Hydraulic clamping pressure infinitely adjustable from 200-1100N Hsdpjztrkrjfx Adwsfk Program function and direct dimension input Manual pre-clamping via foot pedal 1 new blade Electrical connection 230V/50Hz, 250 kg

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Hodszrfdiepfx Adwofk Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.