Used Part Washer for sale (15,750)

Condition: used, Year of construction: 2026, functionality: fully functional, AURORA MP150 Pressure Cabinet Washer is a compact cleaning device designed for washing mechanical parts, tools, and workshop components. The enclosed cabinet limits liquid splashing, while the operating pressure of 5–8 bar makes it easier to remove oil, grease, carbon deposits, and other difficult contaminants. Cleaning is performed using a closed-loop circulating cleaning fluid system. The pneumatic gun allows the operator to apply a mixture of cleaning fluid and compressed air, and after the cleaning process it can also be used for blowing and drying the component. Main advantages of the AURORA MP150 washer Operating pressure of 5–8 bar – effective removal of oil, grease, carbon deposits, and dirt from hard-to-reach areas. Two-function pneumatic gun – enables cleaning with a mixture of fluid and air, as well as drying components using compressed air only. Closed-loop fluid circulation – reduces cleaning agent consumption during regular operation. Internal cabinet lighting – improves visibility of cleaned surfaces and difficult-to-access areas. Integrated protective gloves – allow convenient handling of components without opening the cabinet. Gas struts supporting the lid – make opening and closing the working chamber easier. Cabinet ventilation system – improves working conditions inside the machine. Compact design – allows installation on a suitable workbench or sturdy table. Cleaning and drying with one gun The AURORA MP150 cabinet washer is equipped with a pneumatic gun offering two operating modes. During cleaning, the nozzle delivers a mixture of compressed air and cleaning fluid, helping remove contaminants from holes, channels, recesses, and complex-shaped surfaces. After cleaning, the operator can switch the gun to compressed-air mode. This allows removal of remaining fluid residues and faster preparation of the component for further work, inspection, repair, or assembly. Enclosed and illuminated working cabinet The cleaning process takes place inside a closed chamber, which helps reduce splashing of the cleaning solution around the workstation. Integrated gloves allow free rotation and positioning of the cleaned component without opening the lid. The built-in cabinet lighting improves visibility of the workpiece, allowing the operator to accurately control the cleaning process on dirty surfaces, openings, and hard-to-reach areas. Closed-loop cleaning fluid system Cleaning is performed in a closed circulation system using fluid stored in the machine’s tank. The tank capacity is 8–14 liters. Cedpfx Afsz E Hntozjhd This solution allows repeated use of the cleaning agent and reduces fluid consumption during everyday workshop operations. The simple fluid replacement system makes draining and preparing the washer for further use easier. Standard equipment Two-function pneumatic cleaning gun Protective gloves integrated into the cabinet Internal cabinet lighting Ventilation system Gas struts supporting lid opening Compressed air supply adjustment system Technical specifications – AURORA MP150 pressure cabinet washer Parameter Specification Cabinet capacity 150 L Cleaning fluid tank capacity 8–14 L Operating pressure 5–8 bar Dimensions 770 × 610 × 700 mm Weight 29 kg Gun type Pneumatic, two-function Cabinet lighting Yes Ventilation Yes Please note!!! This is a display model (3 units available) and shows visible signs of corrosion. No warranty or returns.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. Cjdpfs Ahybmsx Afzshd FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, operating pressure: 275 bar, pressure: 275 bar, overall weight: 71 kg, PROFESSIONAL PETROL PRESSURE WASHER WITH BRASS PUMP – TECHKAR "G275" MODEL Operating parameters: 275 bar, 15 l/min Product Description: We offer a professional petrol-powered pressure washer featuring a robust yet compact design and large pneumatic tires, ensuring convenient, efficient, and safe transport to locations where standard electric washers cannot be used. Thanks to its petrol engine and a pump capable of self-priming water from tanks, this unit operates independently of mains electricity and water supplies. It is ideally suited for various outdoor tasks, such as work on allotment gardens. High performance specifications—specifically a maximum pressure of 275 bar and a flow rate of 15 l/min—enable it to handle the vast majority of tasks required of pressure washers. Utilizing standard fittings (M22 thread and standard petrol washer quick-connectors), the unit can be expanded with a wide range of accessories, including brushes, lances, turbo nozzles, sandblasting kits, sludge removers, and T-Racer surface cleaners. The brass pump, equipped with a pressure regulation valve and a safety valve, ensures exceptional durability even under heavy workloads. We are the direct importer of TECHKAR "G275" pressure washers and maintain a continuous stock of service parts (pressure valves, pistons, seals, by-pass valve repair kits) and accessories (such as T-Racer patio cleaners, rotary nozzles, hoses, foam cannons, etc.). When you choose our product, you benefit from comprehensive service and post-warranty support. About the LIFAN brand: Lifan is one of the world's largest automotive companies. The enterprise manufactures motorcycles, passenger cars, trucks, and buses, as well as internal combustion engines and machinery. Founded in 1992, the company is headquartered in Chongqing. It successfully sells its products in highly developed nations—such as the UK, Germany, Australia, the USA, and Canada—where it enjoys an excellent reputation. Set contents: LIFAN 15 HP combustion engine Brass pump head 15m steel-braided hose with 3/8" quick-connectors High-pressure gun with 3/8" quick-connector Spray lance with quick-connector Chedpfx Asz Dv Tcofzsd 0° point-jet nozzle 15° fan-jet nozzle 40° fan-jet nozzle Chemical application nozzle Garden hose quick-connector with metal pre-filter Honda oil supply (2 x 0.6L) Features and benefits: Brass pump head Crankshaft pump, 3-piston design Ceramic plungers Robust intake and discharge valves Thermal safety valve Chemical intake valve with hose and filter Additional BY-PASS pressure regulation valve Water connection for standard garden hose coupling Cover with oil drain opening Cover with built-in oil level sight glass Large pneumatic wheels Sturdy frame Technical specifications: Engine: LIFAN 15 HP combustion engine Starting system: Manual (recoil) Fuel consumption: ≤ 374 g/kWh Fuel tank: 6.5L Fuel type: Gasoline Pump head type: Brass, crankshaft-driven Intake/discharge pump: Yes Working pressure: 275 bar (4000 PSI) Maximum pressure: 300 bar (4400 PSI) Flow rate: 15 l/min (900 l/h) Weight: 71 kg Engine oil: SAE 10W30 Pump oil: SAE 15W40 Condition – new

Condition: new, Year of construction: 2024, Solvent based cabin type parts washer. SOLWASH is a hermetic, closed loop washing machine for mass production. utilizes only chlorinated solvents or modified alcohol. Working principle: Parts are loaded in to the basket sitting in front of the machine roller conveyor. The basket is transferred manually or automatically inside the washing chamber. Washing process is started by selecting the required program from the PLC menu. Basic process flow: spray washing - ultrasonic washing - flushing - rinsing and drying The solvent is automatically regenerated and recycled during running the machine. Application Areas: Precision cast parts, copper, brass parts, parts that require precision washing and drying. Metal Processing Industry - Automotive Industry - Printing industry. All SOLWASHes are tailor-made and have a variaty of options depending on your need. Chsdped I E Iujfx Afzsd solvent cleaning, cabin type parts washer, cabin washer, solvent based washing machine, solvent washing machine Please feel free to contact with us for technical specifications.

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Chsdpfsl Hx Enjx Afzjd

Condition: used, Year of construction: 2026, 140L Parts Cleaning Cabinet Washer The 140L parts cleaning cabinet washer is a professional workshop device designed for effective removal of oils, greases, deposits, and stubborn contaminants from metal and mechanical components. Operating in a closed-loop system, the machine uses cleaning fluid efficiently and economically. Thanks to its large tank capacity and stable construction, it is an ideal solution for industrial plants, workshops, and service facilities. Main advantages of the 140L workshop parts washer Maximum cleaning fluid capacity: 90 liters – allows long, continuous operation without frequent refilling of cleaning agent. Pump flow rate of 2.7–3.6 l/min – ensures precise cleaning of hard-to-reach areas and surfaces with micro-cracks. Large 140-liter tank – enables cleaning of larger machine and equipment components. Closed-loop fluid circulation system – economical use of cleaning liquid, reduced waste, and a cleaner working environment. Automatically locking lid – ensures safe operation during cleaning processes. Stable four-leg construction – provides optimal working height and safe operating conditions. Practical working shelf under the tank – convenient space for drying parts or storing tools. Design and technology The parts washer is equipped with a flexible hose with a spray nozzle, through which the cleaning fluid is delivered under pressure from the bottom of the tank. To ensure optimal performance, the pump inlet must remain completely submerged. The tank lid opens smoothly and locks automatically, increasing operator safety. The robust frame and four supporting legs provide excellent stability, even during intensive use. The well-thought-out design and compact dimensions (1130 x 540 x 885 mm) allow the unit to fit into most workshop spaces while providing a large working area for cleaning bigger components. Precision and cleaning efficiency The high-performance pump, with a flow rate of up to 3.6 liters per minute, combined with the closed-loop system, enables continuous and efficient operation with minimal fluid consumption. The cleaning solution penetrates even microscopic gaps, allowing thorough removal of contaminants from metal, cast iron, steel, and aluminum parts. The machine is designed for use with water-based detergents – cleaning effectiveness depends on the type and quality of the cleaning agent used. Applications The 140L parts cleaning cabinet washer is designed for professional applications in: automotive workshops, repair and maintenance services, mechanical workshops, manufacturing facilities. It is suitable for cleaning: machine parts, tools, engine components, hydraulic system elements, technical components requiring thorough cleaning before regeneration, repair, or assembly. Standard equipment Working tank with automatically locking lid Pump with flexible hose and spray nozzle Steel frame with four legs Working shelf underneath the tank Assembly and operating manual Technical specifications Parameter Value Tank capacity 140 L Maximum cleaning fluid volume 90 L Maximum pump capacity 2.7–3.6 l/min Power supply 230 V External dimensions 1130 x 540 x 885 mm Working tray dimensions 800 x 500 mm Weight 43 kg Chodpfxjz Rwh No Afzjd ATTENTION!!! Customer return: damaged housing, missing coolant hose. No warranty or returns!

Condition: ready for operation (used), Kohlhoff Boot & Sole Washer Fully stainless steel Chsde Agcrkepfx Afzjd Motion sensor activation Boot & Sole brush washer Dimensions: 1500 mm x 320 mm x 1260 mm. In excellent condition

Condition: used, Year of construction: 2011, Overview Bohrer R30 crate washer, built in 2011, for returnable bottle crates. The washer is currently part of a 15,000 bottles per hour bottling line. Stainless steel tunnel housing with inspection windows, access platform with stairs over the machine and its own stainless steel control cabinet. The machine is still installed and running in a mineral water plant. Technical data Cjdpfoz Eh Sgsx Afzjhd - Manufacturer: Bohrer - Model: R30 - Year of manufacture: 2011 - Machine type: crate washer for returnable crates - Currently installed in a 15,000 bottles/h line - Power supply: 400 V, 50 Hz - Connected load: 20 kVA - CE marked Equipment - Stainless steel tunnel housing with inspection windows - Access platform with stairs and railings - Stainless steel control cabinet with push-button operation and emergency stop Condition Used. The machine is still installed and under power at its production site and can be inspected by appointment. Availability Immediately.

Condition: used, Year of construction: 1995, Overview  This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is out production and be viewed in person in our warehouse. Techn. Details - Capacity:  - 6,000 bph - Min/ Max: 3,000 bph – 6,300 bp - Bottle type: 0,5L, Euro, NRW, incl. Set of parts for 330ml vichy bottle - Bottles per row: 12 - Bottles in the machine: 1,080 - Bottle cell carriers: 96 - Dimensions:  - Length: 6,000 mm - Width: 1,545 mm Chsdpfx Ajvl Huaefzjd - Height: 2,175 mm (without feet) - Weight: approx. 5,800 kg - Water consumption: 3,6 m³/h - Heat consumption 80°C: 480 kJ/ h x 1000 - Electrical consumption: 11 kW - Incl. Spare parts - Motors for rear and front drive - Bottle cell carriers - Wear parts - Machine body fully in stainless steel - All hot zones with 5cm insulation - Label extraction belt - Heat exchanger in stainless steel for low pressure steam 116°C-120°C at 0,7 - 1 bar - Self cleaning spray tubes in stainless steel

Condition: used, Year of construction: 1996, Overview This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is still in production and be viewed in person. Techn. Details   Capacity:  10,000 bph Min/ Max: 5,000 bph – 13,000 bph Bottle type: 0,5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle cell carriers: 204 Dimensions:  Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4,0 - 4,8 m³/h Heat consumption 80°C: 700 - 840 kJ/ h x 1000 Electrical consumtion: 17 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Chsdpfxsu H R Nnj Afzod

Condition: used, Year of construction: 2000, Overview  Chjdpfx Afsvm D Umozod The crate washer was manufactured in 2000 by the German company Bohrer. It is located at a German brewery and was part of a plant that has been shut down as it was replaced by a completely new line. In autumn 2024 the line was stopped and the machine was dismantled and stored.  Technical Details  - Capacity: up to 2,000 crates/hour (can be adjusted from 500 - 2,500 crates/hour) - Formats: - crate of 12 bottles 700ml 356 x 275 x 346 travel direction crosswise - crate of 20 bottles 250ml 360 x 275 x 255 travel direction crosswise - crate of 20 bottles 500ml 400 x 300 x 290 travel direction crosswise - crate of 20 bottles 500ml 400 x 333 x 260 travel direction crosswise - Horizontal and vertical spray nozzles - Spraying with hot caustic and fresh water - Caustic heater with temperature regulation is integrated in the machine - Machine is heated by steam - Dimensions: - Length: 4800mm - Width: 900mm - Height: 1400mm - Weight: 1800kg - Sieves for removal of dirt - Incl. documentation - Incl. spare parts list - Incl. Electrical diagram

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Codpfsl Hx Adex Afzjhd

Year of construction: 2021, condition: new, Intersonik top loader rotary basket washers are a quick and economic solution to your parts washing needs. It is easy to use and nature friendly. Top loading mechanism makes the product easy for loading and unloading the washing basket. High-pressure water is sprayed via positioned nozzles during the washing cycle at the same time basket is rotated for even better washing quality. Technical details of the top loader spray washer is listed below: Nr. - Item - Details 1 - Machine dimensions - 850 x 850 x 1000 mm 2 - Loading height - 750 mm 3 - Loading capacity - 380 mm 4 - Stainless steel body - AISI 430 (1.5-2 mm) 5 - Pump power and number - 2.5 hp x 1 6 - Pump body - AISI 304 7 - Total heating power - 15 Kw 8 - Electricity - 380 V / 3 Phase 9 - Timer - 0-30 min 10 - Thermostat - 0-90 C 11 - Basket and nozzles - Galvanized coating 12 - Electrical components - ABB and Schneider or equivalent 13 - Pneumatic components - Mag and Festo or equivalent 14 - Oil skimmer - Available 15 - Drying fan - Optional 16 - Rinsing tank - Optional 17 - Ebara pump - Available 18 - Liquid level sensor - Optional 19 - Automatic liquid filling - Optional Chsdpshcimzsfx Afzjd 20 - Mist exhaust fan - Optional

Condition: used, Year of construction: 2007, Overview Chedpfx Ajzzz Ivefzjd This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 2002, machine/vehicle number: LA14, Used bottle washer dryer GAI - 3500 BPHTechnical Specifications & Performance DataThe Bottle Washer Dryer 5008 is a rotary carousel drying unit engineered for reliable bottle handling within a used bottling line or standalone drying station. Manufactured by Cimec, this second hand machine delivers consistent performance for beverage production and industrial packaging applications where efficient moisture removal is required before downstream labeling, capsule application, or case packing.Model: 5008Year of manufacture: 2002Production speed: up to 3,500 bottles per hourBottle formats (volumetric): Compatible with 0.5L and 0.75L bottle formatsBottle geometry: Cylindrical containersBottle diameter range: 60 mm to 115 mmDrying technology: Rotary carousel (hot air) with anti-condensation featuresPLC installed: NoDocumentation: Paper manuals and electrical schematics availableAdvanced Automation & Control SystemsThe 5008 emphasizes robust mechanical design with straightforward operator control, ideal for facilities prioritizing simplicity and ease of maintenance. While no PLC is installed, the machine’s hot-air drying system integrates anti-condensation management to improve drying effectiveness and reduce residual moisture on the bottle surface. Safety guarding and interlocks are typically part of this class of equipment, supporting safe operation within production environments. Quick mechanical adjustments facilitate format changes across the stated diameter range, helping minimize downtime between production runs.Production Line Integration CapabilitiesThis rotary bottle dryer can operate as a dedicated station or be integrated inline with rinsing, filling, capsuling, and labeling equipment. It is well suited for beverage production lines processing both PET and glass bottles in cylindrical formats. Its compact, carousel-based layout supports smooth infeed and discharge with standard conveyor systems. Format changes within 60–115 mm diameter allow flexibility across common bottle sizes, making it a practical fit for lines handling 0.5L and 0.75L formats.Machine Condition & Maintenance HistoryThe machine has undergone a partial refurbishment in 2025 and has been stopped for approximately one month. It is currently packed and covered, available for inspection. The presence of paper manuals and electrical documentation supports easier recommissioning and setup. Overall, the unit presents as a well-kept second hand component suitable for integration into a used bottling line or as a targeted retrofit in an existing beverage production facility.Operational Performance & VersatilityThe hot-air drying concept with anti-condensation control improves surface dryness prior to downstream operations such as label application or capsule fitting, thereby enhancing label adhesion and presentation. The rotary carousel design ensures consistent residence time and uniform air exposure around the container. Suitable for a broad range of cylindrical bottles, the 5008 supports both PET and glass handling and can complement production of win... Csdpfx Afjz E Dlvozjhd

Year of construction: 2023, condition: new, INTERSONIK BOGIE WASHERS are designed for washing huge parts like train bogie. Operating Principle: Parts are loaded to conveyor with a crane or forklift, once the parts are inside the washing cabin spray wash begins. There are multiple stations inside the cabin generally speaking pre-washing, washing, rinsing or pasivation, drying. Washing maching can be designed as continue system or step by step procedure according to your demand. Washing pumps, nozzles and other elements are decided by INTERSONIK Engineers meticulously for perfect results. Ideal for train maintenance. Chjdpfx Asd I E Rajfzsd Please check the video and feel free to contact with us for further details.

Year of construction: 2025, condition: new, DOLFİN- VDL series Drum (Spiral) parts washing machines are used particularly for the purpose of cleaning small parts that are manufactured in large quantities and in bulk. The materials that are poured from the inlet part of the spiral drum in the device are directed towards the outlet part of the drum with the spirals inside the drum. While the drum moves in its own axis according to the set rotation speed, it subjects its parts to, respectively, washing (degreasing), rinsing, passivation and drying processes (varies per the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively within a single device. Full penetration is ensured by pressurized spraying and dipping effects in each section. It is a very functional model of us that is used particularly for washing the bolts, nuts, washers, or such small parts, fittings, nipples, couplers and fittings that are processed in CNC and automated machines in high quantities. Regardless of the metal type of the parts to be washed, they are fully compatible with steel, brass, aluminum copper or stainless steel materials. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. Chodpfxev S Dk Sj Afzed The device operates continuously in accordance with the values of the washing parameters that have been entered from the control panel before operation. Parts that come out of production in bulk can be loaded into our device in 3 different manners. 1. With Vibrating Loading Chamber, 2.With Lift Conveyor, 3. By coupling to our Customer's existing system, Do not hesitate to contact for more information. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: used, Year of construction: 2001, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, compressed air connection: 6 bar, input current: 204 A, heating capacity: 90 kW (122.37 HP), power: 50 kW (67.98 HP), load capacity: 750 kg, Equipment: documentation/manual, We offer a cleaning and degreasing system, type VAIOCS S G, as a front-loading system (used system from 2002 – completely overhauled* + new cleaning chamber) for batch sizes with a maximum diameter of 1,500 mm and a maximum height of 600 mm, for use with modified alcohol (A III) or hydrocarbons (A III). * Vacuum pump new – all media-carrying pumps new – remaining pumps overhauled – Control cabinet, S7-300 control system, graphic display MP377 and safety technology upgraded to the latest standard – Pneumatics (Festo) serviced and partially new – pneumatic installation completely new – Electrical installation partially new – valve seals new – container insulation new – Refrigeration unit overhauled – Cleaning chamber, basket holder, swivel mechanism and door completely new Manufacturer: EMO Type: VAIOCS SG Order number: 515215 Year of manufacture: 2001 / 2016 Operating voltage: 400 V/N/PE Control voltage: 24 V DC Connected load: 140.0 kW Heating power: 90.0 kW Motor power: 50.0 kW Rated current: 204 A Csdj Ahx Dtjpfx Afzjhd Solvent: Nikutex 2307 Filling volume: 5000 l If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2013, ZIPPEL REMA K1 400 3 LB Industrial parts cleaning system (washing system) Year of manufacture: 2013 Washing, rinsing, and drying in a continuous system with a washing basket to remove oils, chips, and dirt from workpieces before further processing or assembly. Approved according to WHG (German Water Resources Act). System is currently powered. System description, technical data & plans – see PDF. All technical specifications, illustrations, and content are non-binding and without warranty. Subject to change and errors. Cjdpo Ahm Smsfx Afzehd All other accessories visible in the photos are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation, and on the invoice. EXW (Ex Works) D-92729 Weiherhammer Exclusively disassembly, removal, and loading Delivery time: immediately Subject to prior sale / Payment due immediately upon purchase.

Condition: used, Year of construction: 2024, Overview Used spare parts for KRONES Contiform S PET stretch blow moulders (S8 to S24), sold individually from stock - no need to buy the complete inventory. The part descriptions name the executions S Gen. 2-3.1, S Gen. 4a, S Enviro and Enviro 2. Age and condition - Mould carriers and heating chain: 2 years old - Cams: older, without damage - Electrical parts: partly from 2005, others newer. The older ones are no longer made in this form; the alternative is a retrofit at extra cost. - All parts used, sold as-is without guarantee, subject to applicable law and the agreed sales terms Available parts (part number, description, quantity) Heating and preform handling - actuation unit T50 NRS (32) - heating chain link HZM T50 (250) Cedpfxj Ahxz He Afzjhd - 1786323181 heating mandrel, 44 mm stroke (250) - three-phase motor 120/150 W (20) - 1786323430 reflector, complete (60) - 2800200575 energy-optimised heating box (20) Cams and locking - 1786470930 guide cam, downward (1) - 1786470940 guide cam, upward (1) - 1786470640 cam segment (1) - 1786470660 cam segment (1) - 1786470650 cam segment (1) - 1786470700 cam segment (1) - 1786470710 connecting plate (1) - 1786471180 linkage lever (1) - bearing bracket LBN-20/25 (1) - double-acting cylinder 25 mm, stroke 20 mm (1) - rod-end joint (1) - locking cam type 787 (1) - unlocking cam type 787 (1) - main cam (quantity on request) Drive and blowing modules - synchronous geared motor 11 kW (1) - 2786107120 pinion shaft, 18/24 stations (1) - 2800207818 intermediate shaft, 24 stations (1) - sealing head (1) - 2800200738 stretch module housing (10) - 9120641682 blow piston block, Enviro 2 (24) - blow slide, S Enviro (20) - 2800200762 stretch slide, S Gen. 2-3.1 (20) Mould carriers S Gen. 4a - mould carrier, complete (23) - 2800200765 base mould holder (23) - 2800200774 actuation assembly (23) Bottle transfer - 9121792003 swivel arm, infeed star (24) - 2800200556 bottle rejection assembly, 16-24 stations (2) Media and electrical - flow meter type 335 (3) - 1786411200 hose assembly, base mould (20) - 1786411210 hose assembly, mould half A (20) - 1786411220 hose assembly, mould half B (20) - power controller (20) - safety switch 250 V / 2 A (8) - Danfoss VLT 500 frequency inverter (6) Compatibility Check the fit on your machine before purchase: send the KRONES machine model with its type plate data, the part number and, if available, the assembly or drawing number. KRONES and Contiform are trademarks of their respective owner; this is an independent offer of used spare parts. Availability Available immediately from stock; quantities subject to confirmation, photos of individual parts on request.

Condition: used, This listing is for the Cytiva AxiChrom 300/300 Chromotography collumn The unit is in full working condition and is ready for immediate use AxiChrom is a line of low-pressure, axial compression chromatography columns designed for process development and manufacturing of biopharmaceuticals. They are built for GMP‐compatible use, scalable from lab/ pilot to full production 300 mm inner diameter (i.d.) 300 mm bed height (column length) or related bed volume configuration Features Axial compression packing (intelligent packing): preprogrammed / automated methods for packing, ensuring reproducible bed density / performance. “Swing‑out” tube or movable adapters: for large diameters (≥ 300 mm), the column tube swings out to allow easier access to the bed supports, seals and O‑rings. Sanitization / Cleaning / GMP compliance: Parts (“wetted” and “pressure retaining”) are traceable by batch, and materials comply with USP Class VI, 21 CFR part 177, EMEA regulatory requirements. Cleaning and sanitization are feasible, including treatment with 1 M NaOH, with effectiveness for microbial and endotoxin removal. Flexible configurations: options for different bed heights (usually ~10‑50 cm for large diameters) and different bed support types Codpoxhdwyofx Afzjhd

Year of construction: 1986, condition: used, functionality: fully functional, Equipment: documentation/manual, BVL Rotocleaner 750 This cleaning and degreasing system with a steam extraction fan and oil skimmer is in good used condition. Manufacturer: BVL Oberflächentechnik Year of manufacture: 1996 In 2011, the washing machine was completely overhauled, and the gear motor, heating element, gas spring, and heating system were replaced. Automatic basket washing system with a removable rotary basket. Basket diameter: 720 mm (internal diameter) Basket height: 140 mm (internal height) Max. usable height (workpiece): 450 mm Max. batch weight: 500 kg External dimensions: Width 1190 mm, Depth 1170 mm, Height 1170 mm. Weight: 290 kg Operating manual, technical documentation, and CE declaration of conformity for the system are available. The housing of the cleaning system and the associated pipelines are made of stainless steel. Cleaning is carried out using a special nozzle system with wide-angle nozzles and a driven rotary basket. A U-shaped spray system ensures ease of operation and high efficiency. The nozzles are supplied by a powerful circulation pump, which ensures intensive treatment and is equipped with a carbide mechanical seal. Heated tank in the lower part of the system. If the liquid level drops below a certain point, a fixed water connection ensures automatic refilling. This ensures safety for the heating elements and pump, as well as clean and precise dosing of the required amount of water. Internally located return baskets filter out coarse dirt from the cleaning solution. A vapor extraction system removes the steam before the hood is opened. The cover is supported by a gas spring. The filling system is very easy to use, enabling a fast workflow. Loading by crane is possible. Price: Negotiable Our asking price per unit is €1,990.00 net, ex works, plus packaging costs. All technical specifications are subject to typographical errors and omissions. Chjdpewzwfgjfx Afzsd Sale exclusively to countries within the EU.

Condition: good (used), Year of construction: 2005, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Cjdpfx Afo Aardpjzshd Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged. Chsdpfszlr N Ssx Afzed

Condition: repair required (used), Year of construction: 2019, machine/vehicle number: N1000065258, "FLOOR WASH MACHINE TERA 1102 - NILFISK SC 6500-1100D, Serial NO. N1000065258 , Construction date 28.02.2019" Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Sebes, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. Csdpfx Afsv Axycszjhd We organize only the loading part of the machine on the trailer/truck with forklift/crane