Used Partial Straightening Machine for sale (92,248)

Year of construction: 2019, condition: used, The EFD machine we are offering has a capacity of 2000 mm, but once the MF and HF adaptation boxes are installed, this travel is limited to approximately 1700 mm. It is equipped with a Siemens 840 D CNC (replaced 3 months ago), with 3 digitized axes: Z, Y (200 mm), and C, a double spindle with dual tailstock controlled separately, 1 MF adaptation box, and 1 HF adaptation box. The machine height is 4400 mm. The maximum workpiece weight on the main spindle is 600 kg. The maximum weight per piece on the double spindle is 50 kg. The converter is transistor-type, with a power output of 300 kW and equipped with three frequency ranges: 100 kHz at 200 kW, 3 kHz and 10 kHz at 300 kW. Parameter monitoring is integrated into the Siemens 840 D CNC. It will control: voltage, current, power, MF or HF frequency, quench flow rate by analog flowmeter, quench water temperature via PT 100 probe, with a color printer included. Optionally, a serial link is available, allowing program transfer to avoid dual programming for the CNC and the RTM 100. SUPPLIED EQUIPMENT: - 1 galvanic isolation mains transformer, 400 V three-phase + earth (for network disturbance protection and operator safety) - 1 SINAC P M/H transistor converter Power: 20 to 300 kW Frequency: 3 to 100 kHz - 1 medium frequency adaptation box with 55 VT 8 transformer 1 capacitor bank for 3 kHz 1 capacitor bank for 10 kHz - 1 high frequency adaptation box without transformer 1 capacitor bank for 100 kHz - 1 manual selector switch for 3 and 10 kHz selection - 1 manual selector switch for 100 kHz or 3/10 kHz selection - 1 standard vertical traversing hardening machine, type HGL 2000, 3-AXIS, equipped with: - 1 SIEMENS 840 D controller (replaced 3 months ago) - 1 X-axis, vertical travel approx. 1500 mm depending on MF and HF adaptation boxes Dsdexc Exhjpfx Adksku - 1 Y-axis, horizontal travel 200 mm - 1 C-axis spindle rotation, max workpiece weight 600 kg, max diameter 500 mm (according to inductor) - 1 double spindle with dual tailstock - 1 hydraulic circuit with analog flowmeter for quench water - 1 second hydraulic quench water circuit without flowmeter, solenoid valve controlled by program, no flowmeter supplied - 1 simple interface for high frequency inductor connection - 1 simple interface for medium frequency inductor connection - 1 operator access door - Integrated RTM 100 standard process monitoring system in the Siemens 840 D, with color printer - All necessary electrical interconnections for medium, high frequency, and low voltage - Complete documentation in French (user and operating manuals) This installation is highly versatile due to its wide frequency range (low, medium, and high), all provided by a single generator, making it rare on the market. The high power rating of 300 kW enables the processing of large or two workpieces simultaneously.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Vacuum fryer used for vegetable chips. In very good condition. Located in The Netherlands. Dodpfsxg Tfqox Adksku

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, total width: 2,260 mm, total length: 5,000 mm, power: 4 kW (5.44 HP), input voltage: 400 V, Coolers system for industrial solution. All info on photos. Dksdexaw Rwepfx Adkju

Condition: good (used), Rigid Box Corner Pasting Machine GC-40 A brand new device. Dodpfx Aewfratsdkoku The machine glues cardboard corners with paper tape or foil. Technical data: Tape length 5-35mm Hoof depth 10-300mm Tape width 19mm Efficiency 20-40 cycles/min Weight 230kg Power supply 230V

Condition: new, Year of construction: 2017, operating hours: 25 h, functionality: fully functional, saw band length: 520 mm, saw band width: 580 mm, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 380 V, New machine. Dkodpfx Ajunia Hjdkeu

Condition: used, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. Dodjwk D Dzopfx Adksku The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: MGB1320E, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Equipment: rotational speed infinitely variable, Beijing Second Machine Tool Dedpfxotr Azks Adkoku Beijing Second Semi-automatic High Speed Cylindrical Grinding Machine MBS1320E On-line production equipment; test machine available; roundness within 0.001 beier machine tool works co ltd Online production equipment machine testing available The roundness within 0.001

Condition: as good as new (ex-display), functionality: fully functional, Table size 540 x 250 mm Max table travel 560 x 260 mm Max distance from table to spindle center 450 mm Table slide-way Double-V rail Feed of cross handwheel, per revolution 5 mm Feed of cross handwheel, pe graduation 0,02 mm Feed of vertical handwheel per revolution 1,25 mm Feed of vertical handwheel per graduation 0,01 mm Wheel speed (50 Hz) 2850 rpm Wheel speed (60 Hz) 3440 rpm Wheel size 200x31,75x20 mm Power of spindle motor 1500 W Hydraulic station motor 1500 W Dkedpfxsu Hzg Rs Adkju Working pressure 3 Mpa Max runoff 18 L/min Fuel tank capacity 80 L Coolant pump 40 W Machine's net weight 900 kg Size 1,80x1,40x1,80 m Robust and reliable construction. Zero working hours Price should remain the same till end of December.

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, The machine is designed for mixing various mixtures, whether solid or liquid, in large containers, with the designated space for the containers measuring 1200x1050x790 mm. Once the container is placed into the designated area, the machine begins to rotate, performing the mixing process. The mixing time can be electronically adjusted. Technical Data: Speed – variable, controlled by frequency converter 220V-380V / 3.7 kW Power consumption – 1500 W Supply voltage – 1x220V / 50Hz Motor protection – IP 54 Machine weight – 1000 kg Container space dimensions – 1200x1050x790 mm Working chamber dimensions – 1870x1860 mm Dsdpfow N I Uysx Adkjku Total height – 1980 mm

Condition: used, Year of construction: 2002, functionality: limited functionality, machine/vehicle number: 2123, FAMAR AP60, including one size part for tablets and one size part blister PVC-ALU, 10 cells, for capsules size “0” Dedjv S Eurspfx Adksku Sold as seen

Condition: excellent (used), Eyeletting machine for advertising banners The device is in perfect condition, ready for work. Technical data: 1 head laser indicator Dkjdpfsw Ed U Ajx Adksu Foot pedal operated

Condition: new, Year of construction: 2025, laser power: 1,500 W, pipe diameter (max.): 6,000 mm, pipe length (max.): 6,000 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Glorystar Laser ALL NEW Tube Laser Machine | VS6008G | 1.5KW (Nur für deutschen Preis!!!) 1.5KW Laser Source Cutting Head Glorystar Servo motor Inovance Screw rod Standard Guide rail Standard Chuck Standard High-speed flexible cable IGUS Electrical control Schneider automatic loading system (standard) Round tube ≤Φ87mm Square tube ≤60mm*60mm Rectangular tube diagonal ≤87mm Dkedpjv Dutzofx Adkju

Condition: like new (used), Year of construction: 2020, functionality: fully functional, turning length: 760 mm, turning diameter: 400 mm, spindle bore: 54 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 150 rpm, Equipment: rotational speed infinitely variable, As-good-as-new teach-in lathe for both conventional and CNC turning operations. Includes tool trolley with various cutters, inserts, drill heads, and tapping head. Djdpoxb A Ikjfx Adkeku

Condition: excellent (used), XYZ SLX 555 x 3M CNC Lathe (2018) Serial Number: SLM00083 Year: 2018 Control: Protrak SLX CNC Condition: Used – excellent condition Technical Specifications: Swing over bed: 560mm Swing in gap: 935mm Gap in front of faceplate: 297mm (max) Swing over cross slides: 350mm Cross slide travel: 290mm Distance between centres: 3000mm Maximum cutting length: 2900mm Spindle bore: 104mm Spindle nose: D1-11 camlock Dkedpfx Adsxc Ipiokeu Spindle taper: MT7 in bush Spindle motor: 11 kW (15 HP) Spindle speeds: 30 – 1800 rpm (2 ranges) Tailstock travel: 200mm Tailstock taper: MT6 Tailstock diameter: 105mm Bed width: 500mm Machine footprint (L x D x H): 5220 x 2150 x 1950mm Machine weight: 7400kg Features & Equipment: Protrak SLX control Drilling attachment Quick-change toolpost 3-jaw chuck 4-jaw chuck 3-point steady

Condition: excellent (used), Year of construction: 2018, turning diameter: 560 mm, spindle speed (min.): 1,800 rpm, turning length: 3,000 mm, XYZ Proturn SLX555 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2018) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2018 Dimensions: L x D x H 5220 x 2150 x 1950 mm Dkjdpexc Nmiofx Adksu Weight 6340kg Supplied with: 3 Jaw Chuck 4 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders Fixed Steady Interlocking Guards Auto Lubrication. Coolant. Worklight Tooling as Photographed We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79000 Machine Serial Number: SLM00083 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2021, operating hours: 250 h, functionality: fully functional, overall weight: 2,000 kg, total length: 3,500 mm, total width: 1,800 mm, total height: 2,100 mm, type of input current: three-phase, CNC Milling Machine for Sale Due to Retirement. Description For sale: CNC milling and cutting machine. Specifications: - Year: 09/11/2021 - Working table dimensions: 1500 x 3000 mm Dsdpjxcvzmofx Adkoku - Automatic tool changer - 9000W air-cooled spindle - 8-tool linear magazine - 4-zone vacuum table with pneumatic stops - 7500W 380V vacuum pump - 2-bag chip vacuum extractor, 1500W 220V - Compressor - Z-axis travel: 200mm (X: 3000mm, Y: 1500mm) - Yaskawa 750W servo motors on X, Y, and Z axes - Cutting tools (carbide, diamond) - Various additional equipment - Spare parts kit - Control station with computer - Software included: - TopSolid (expandable for design and drafting) - CamBam (programming) - Opticoupe (cutting optimization) Vanloisir is a van conversion company based in Charente-Maritime, operating for over 11 years. Due to retirement, we have decided to sell our CNC machine, along with all software (TopSolid) and accessories. We are offering the complete package for €14,000. For an additional fee, training for the machine's operation can also be arranged.

Condition: good (used), Banding machine TP-601 D1 The machine is operational, ready for production. Producer: M.J Maillis Sander Simple controls. An indispensable device on expeditions, for packing heavy parcels, e.g. with leaflets or catalogues. A strip of PP tape strengthens the packaging and additionally creates a handle that allows us to easily grab and transport the package. Adjustable tension force. Dksdpfjw D E Riex Adksu Goal size 850x600mm Strap width 10mm Power supply 230V Weight 200kg

Condition: new, Year of construction: 2024, functionality: fully functional, power: 1.5 kW (2.04 HP), load capacity: 5,000 kg, Overturn capacity:5T Table Height:580mm Dkjdpfxeuhcdqo Adkeu Table Size:1200*1200mm Motor Power:1.5Kw Machine Dimension: 2130*1200*1780mm SXKH adopted European design, the machine is used to make the mold & die reverse at 90 degree. There are some advantages of the machine, such as heavy weight of overturning, the smooth and stable overturning of the inverted goods, reducing the damage of molds when they are being overturned and reducing the damage of movements and the grounds, which makes the overturning process fast and convenient and makes the safe and civilized production.

Condition: excellent (used), Year of construction: 2013, Travels X-axis: 650 mm Y-axis: 560 mm Z-axis: 560 mm Rapid traverse: 32 m/min 2 work tables each: (setup side / machining side) Pallet dimensions: 500 x 500 mm Possible table position: 360,000 degrees Max. workpiece weight: 400 kg MILLING SPINDLE Spindle mount: SK-40 DIN 69871 Direct drive: 8,000 rpm with gear box Drive power: 10 / 16 kW Tool changer Tool changer type: Double gripper Number of tools: 40 Max. tool diameter: ø 115 mm Max. tool length: 300 mm Internal coolant system Spindle cooler Chip conveyor Connection data and dimensions Air connection: 6 bar Dksdpfxov Sdcno Adkeu Total connected load: 25 kVA Rated voltage: 380V 50/60 Hz Minimum machine weight: 6,700 kg Machine dimensions (LxWxH): 3,500 x 2,500 x 2,650 mm Very compact machine! Video available.

Condition: excellent (used), Year of construction: 2019, The machine is in very good condition – the latest model is designed for poultry slaughter and initial processing, ensuring a capacity of 13,500 birds per hour. Technical Specification Model: 20x6" Capacity: 13,500 birds/hour Live weight: 1.2-4.0 kg Number of units: 20 Shackle pitch: 6" Ijbtt Shev Avvuedfjar Length (X): 2508 mm Height (Y): 2985 mm Djdewdidmspfx Adkoku Width (Z1): 1693 mm Width (Z2): 3092 mm Width (Z3): 2580 mm Weight: 1535 kg Water consumption: 1.0 m³/h Water connection: High pressure: 40 bar; Medium pressure: 8 bar; Low pressure: 2-3 bar Water inlet: 3/8" BSP Drain connection: DN100 BSP

Condition: used, BROACHING MACHINE Dodpfot Hr Dfjx Adkoku

Condition: excellent (used), Year of construction: 2007, XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2007) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Dsdpfexawdksx Adkeku Tailstock Travel 160m Manufactured | 2007 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication Jet Machinery Stock No: #78986 Machine Serial Number: SL286 Cost: £19,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Ideal 8324 folding machine Japanese production machine. The condition of the machine is very good, like new. Efficient folding machine designed for A4 format. Equipped with a convenient knob to set the type of folding. folding speed: up to 7,000 sheets per hour minimum paper weight: 65 g/m2 maximum paper weight: 130 g/m2 minimum paper size: A6 maximum paper size: A4 Other parameters: ways of folding paper: standard letter (in 2), in a „Z” (in 3), single (in 2), parallel double (in 4) digital counter: Yes Djdpow Awwrefx Adkeku auto power off after job done: Yes automatic shutdown when lid is opened: Yes optical and audible paper jam indication: Yes

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 19090103008, Equipped with a milling spindle for 3 axes. Additionally fitted with an oscillating tangential knife, upgraded for a fourth axis (rotary axis). Furthermore, two additional tools are installed for performing 45° miter cuts along both X and X axes. Ideal for applications such as acoustic materials, foam materials, PU foam panels, cardboard, etc. Max. knife length: up to 120mm, shank diameter: 6mm. Dsdewx E Tgspfx Adkoku Dimensions: - 2200 x 3600 mm - Travel width (dome): 2440 x 3600 mm Working area for the oscillating knife: - Y direction: 3100 mm - X direction: 2100 mm Working area for the spindle (4.5 kW): - Y direction: approx. 3000 mm - X direction: approx. 2000 mm - Clearance: 200 mm Vacuum table size: 2020 x 3100 mm The machine features a 6-zone vacuum table and a water-cooled pump with a power rating of 5.5 kW (pump dimensions: 1200 x 800 x 1000 mm – to be set up separately). Total machine weight is approx. 1.85 t. - Rack and pinion drive - Oil lubrication system - Stepper motors (step by step) - Spindle speed max. 24,000 rpm – high-frequency, water-cooled - Dust extraction connection Included in delivery is a complete workstation including CAD/CAM software in German, PC, monitor, and keyboard, all ready for immediate operation. Various tools and spare parts are also included. The machine has been in use since 01/2020 for acoustic material processing and has been regularly maintained. Price: €12,500.00 (excl. VAT), without delivery and installation. The machine is disassembled and ready for collection.

Condition: refurbished (used), ROLLFORMING MACHINE Dksdpfx Asfgl Aqedkeu PRODUCING SQUARE PROFILES WITH 5 TONES OF TOOLS MADE IN ITALY