Used Path Control for sale (47,137)

Condition: used, functionality: fully functional, For sale: an industrial submersible pump, Flygt 2610.171, designed for pumping water and drainage applications. The pump’s capacity is 40 m³/h, which is 40,000 liters per hour. The actual flow rate depends on the lift height and installation conditions. The pump is equipped with a float switch, a power cable, and a control module with a CEE power plug. A carrying handle facilitates transport and lowering of the unit, and the lower suction basket prevents larger debris from entering the pump. Bljdpfx Aksz S Nbwjtsp Technical specifications: Manufacturer: Flygt / ITT Water & Wastewater AB Model: 2610.171 Capacity: 40 m³/h – 40,000 l/h Power rating (as per nameplate): 1.2 kW Power supply: three-phase Voltage: 400 V star (Y) / 230 V delta (Δ) Rated current: 2.7 / 4.7 A Frequency: 50 Hz Rotational speed: 2740 rpm Operating mode: S1 – continuous operation Ingress protection: IP68 Maximum medium temperature: 40°C Power factor cos φ: 0.85 Weight: approximately 19 kg Made in: Sweden Included in the set: Submersible pump Float switch Power cable Control module with switch and indicator lights CEE power plug

Condition: excellent (used), We offer an industrial frequency inverter/converter, the FLENDER LOHER DYNAVERT. Technical specifications: Manufacturer: FLENDER LOHER Series: DYNAVERT Type: A 2T2A-05400-002BADIOO Item number: 1079041 Serial number: 7375662 Input voltage: 3 × 400 V Input frequency: 50–60 Hz Input power: 4 kVA Output voltage: 3 × V Output power: 3.8 kVA Output frequency range: 0–50–200 Hz Current: 5.5 A Operating temperature: 0 to +40°C Protection class: IP20 Design: S9 CE marking Made in Europe The device is equipped with an operator panel featuring a display and control keyboard, as well as communication connectors, all of which are visible in the photos. Bledpfez Spbgsx Aktep Condition: Used device, in good visual condition. The housing shows signs of use and storage. There is damage/scratch to the housing's paintwork in one area – see photos. The damage is external. The exact unit shown in the photos is the one being sold.

Condition: excellent (used), For sale is an industrial LOHER DYNAVERT frequency inverter with a control panel and display. Bljdpfez Spbmex Aktep Technical data: Manufacturer: LOHER Series: DYNAVERT Type: A 2T2A-07400-002BADIP4 MLFB: 6SE0102-1AA15-5AA5-Z EP-No.: L4-100001462 Serial number: 7395649 Year of manufacture: 2011 Supply voltage: 3 × 400 V Input frequency: 50–60 Hz Input power: 3.7 kVA Output voltage: 3 × V Output frequency: 0–250 Hz Maximum output power: 3.8 kVA Output current: 5.5 A Ambient temperature: 0 to +40°C Protection class: IP20 Designation: S9 Integrated TMS thermal protection tripping device EC type examination certificate Certificate: PTB 07 ATEX 3057 ATEX marking: Ex II (2) GD Terminals: X3: 90/91 Made in Germany The frequency inverter is used and comes from the dismantling of an industrial installation. Its visual condition is good, with normal signs of use and storage visible in the photos.

Condition: ready for operation (used), Control Techniques SA038 SPINDAX AC spindle drive, serial number as shown in the photo, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Bodpfxsi D Unfo Aktolp

Condition: excellent (used), functionality: fully functional, controller manufacturer: Haas, Equipment: documentation/manual, 3-Axis Machining Center Manufacturer: Haas Type: VF-1 / VCE-500 Year of manufacture: 09-1998 Control system: Haas (retrofit) Operating hours: unknown Serial number: 16XXX Technical data: ----- - Table size: 660 x 356 mm - Travel distances X-Y-Z: 508 x 406 x 508 mm - Spindle: max. 7,500 rpm - Spindle power: 11 kW - Tool holder: SK40 - Tool magazine with 20 stations - Coolant system - Programmable coolant nozzle - Chip conveyor - Footprint (L x W x H): 2.60 x 2.30 x 2.50 m - Weight: approx. 3.2 t Accessories: ----- - Documentation - SK-40 holder set Special features: Blsdpjz Sy I Isfx Aktjp ----- - Retrofitted with a newer Haas M17.04B control system! - In top condition.

Condition: ready for operation (used), Rexroth / Indramat MHD093B-035-PG0-AA motor, serial number 287096, SN: 093-10540. Professionally and completely overhauled and tested. 100% functional. Scope of delivery as shown in the photos. Blsdpfx Aez Tbc Noktop

Condition: used, Universal Temperature Control Unit Oil Advanced with electric heating and connections for external cooling. Oil temperature control unit, circulating process temperature control, heating unit, cooling unit, electric heating. SINGLE Type Advanced Oil D2-300-18-116 Mfg. No.: 151777 Year of manufacture: 2015 Bodpfx As Aarfaektolp Temperature max. 300°C (with heat transfer oil) Temperature range +20°C to 300°C Operating overpressure max. 8 bar Pump capacity 100 l/min Tank volume 22 liters (internal filling volume) External filling volume max. 86 liters Heating power 18 kW Cooling capacity heat exchanger 116 kW Pump motor power 2.8 kW Heat transfer medium Marlotherm SH Circulating water supply and return DN25 - G 1" Cooling water supply G 1/2" Cooling water return G 1/2" Connection power 23.5 kVA Control SCT standard - 7" touch display Mains connection 400 volts, 50 Hz, 32.7 amps - Temperature control medium up to 300°C = heat transfer oil (Marlotherm SH) - Temperature control - External cooling unit or external cooling circuit is required for cooling (cooling is achieved via a heat exchanger between the cooling medium and the heat transfer oil) - Mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1125 x 395 x 1210 mm Weight 226 kg Good condition

Condition: new, functionality: fully functional, This device is classified under Industrial Automation and Controls, specifically falling into the subcategory of PLC Modular I/O Systems (Analog Input Slice Modules). Technical Specifications • Manufacturer: B&R Industrial Automation GmbH (A member of the ABB Group) • Product Line: X20 System • Model Number: X20 AI 4632 (or X20AI4632) • Hardware Revision: Rev. G0 Blods Agmv Eopfx Aktop • Input Channels: 4 Analog Inputs • Signal Configuration: Differential inputs supporting either ±10 V voltage or 0 to 20 mA current configurations (selected via separate terminal connections). • Converter Resolution: 16-bit (15-bit + sign for voltage; 15-bit for current). • Conversion Speed: Ultra-fast 50 µs parallel conversion time across all active inputs. • Electrical Insulation: 500 Veff isolation voltage between the channels and the internal system bus. • Integrated Functions: Supports specialized software troubleshooting features, including an built-in oscilloscope function. • Country of Origin: Made in Austria • Regulatory & Hazardous Approvals: CE Mark, UKCA, cULus Listed, KC certification, ATEX Zone 2 Compliant (II 3G Ex nA nC IIA T5 Gc), and Class I, Division 2 (Groups A, B, C, D) HazLoc rating. Brand new never used. Please check out our other listings as well.

Condition: used, Year of construction: 2004, Slider length: 3400 mm Cutting width at the rip fence: 1300 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Blsdpszqyxxsfx Aktjp Rip fence display: digital display Crosscut scale display: scale Crosscut scale with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 7.5 kW Dust extraction connection: 80 and 120 mm Machine length: 3600 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 2002, Sled length: 3000 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 3200 mm Bjdpfxezhm Dpo Aktelp Cutting depth: 154 mm Scoring blade: no Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Crosscut fence with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: good (used), Year of construction: 2008, Center height: 445 mm Center distance: 4000 mm Swing diameter over bed: 890 mm Swing diameter over cross slide: 550 mm Swing diameter in gap: 1150 mm Spindle speeds: 0 – 1480 rpm Spindle bore: 106 mm Spindle motor: 22 / 33 kW continuous rating / S 6 (40%) Machine weight approx. 12,500 kg Accessories / Special features: • Cycle control FAGOR CNC 8055i TC with alphanumeric keyboard o 10.4" LCD color monitor o Graphic simulation of cycles o Electronic handwheel for manual machine operation • 3-jaw chuck • 8-station tool turret • 2 fixed steady rests with rollers • Movable control panel • Automatic lubrication of headstock Blsdpoyy Nlpefx Aktsp • Automatic lubrication of longitudinal and cross slides • Tailstock with hydraulically operated quill • Coolant system • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), mileage: 7,29,283 km, power: 353 kW (479.95 HP), first registration: 04/2019, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, color: black, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Equipment: AdBlue, central locking, cruise control, electric window regulation, fog lights, onboard computer, parking air conditioner, parking heater, soot filter, spoiler, tail-lift, = Additional Options and Accessories = - Rear work lights - Front work lights - Heated mirrors - Windshield - Cab - Particle filter - Sleeper cab - Auxiliary heater - Automatic heating system = Notes = DAF XF480 SuperSpacecab 6x2 - Tautliner - Full air suspension - Night climate control Model Year: 01-04-2019 Mileage: 729,283 km XLRASH4300G269214 Dimensions: 738 - 248 - 272 Full air suspension Load lift Navigation system Night climate control Refrigerator Microwave oven Coffee machine Bsdpj Ahri Iofx Aktolp = Additional Information = General Information Year of manufacture: 2019 Technical Information Number of cylinders: 6 GVWR: 27,000 kg Transmission Transmission: Traxon, 12 gears, automatic Axle Configuration Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Max. axle load: 8000 kg; Steered; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle 1: Tire size: 315/70R22.5; Dual tires; Max. axle load: 11,500 kg; Tire tread depth inner left: 70%; Tire tread depth outer left: 70%; Tire tread depth inner right: 70%; Tire tread depth outer right: 70% Rear axle 2: Tire size: 385/55R22.5; Max. axle load: 7500 kg; Steered; Tire tread depth left: 30%; Tire tread depth right: 30% Functional Tail lift: Rear tailgate Condition Technical condition: good Optical condition: good

Condition: used, Radial fan, fan, blower, control cabinet fan Control cabinet fan, radial module with support spider EBM PAPST Type K3G450-AZ30-61 Year of manufacture: 2015 Motor: M3G150-IF Blodpfxe Agw Ene Aktop Design: Radial Air flow rate: max. 8040 m³/h Pressure increase: 1492 Pa Fan: Ø 450 mm Number of blades: 7 Power connection: 3~ 380-480 VAC 50 / 60 Hz Nominal speed: 2750 rpm Power: 5370 Watts at 400 VAC Rated current: 8.3 A at 400 VAC Efficiency: 64.9 % Efficiency grade N: 67.7 External mounting frame: 550 x 550 mm Operating mode: Continuous operation (S1) Bearings: Maintenance-free ball bearings Protection class: IP55 Insulation class: F Compliance with standards: EN 61800-5-1; CE Approvals: CSA C22.2 No. 77 + CAN/CSA-E60730-1; UL 1004-7 + 60730-1; EAC Technical features: - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (parameterization) - External enable input - Fault alarm relay - Integrated PID controller - Motor current limitation - PFC, passive - RS485 MODBUS-RTU - Soft start - EEPROM write cycles max. 100,000 - Control input 0-10 VDC / PWM - Control interface with safety-isolated SELV potential - Over-temperature protection, electronics / motor - Under-voltage / phase failure detection Dimensions W x H x D: 550 x 550 x 480 mm Weight: 54 kg Very good condition - from a test setup

Condition: used, Consists of control cabinet Bljdpfx Aj Ahk N Ujktep No. 1- 1-3 No. 2 - 4-6 No. 3 - 7

Condition: used, Year of construction: 2003, Temperature Control Unit Bledpfxszbc Hbs Aktop Manufacturer: GWK Model: teco cw 60 Year of manufacture: 2003–2008 Technical data: - Circulating medium: 25 °C - Cooling capacity: 10 kW - Electrical connected load: 5.45 kW - Operating/control voltage: 400–415/24 V / 50 Hz - Rated current/max. back-up fuse: 15.2 / 25 A In our assessment, the temperature control units are in good used condition. The offer includes 2 units. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 1999, Maximum distance between centers 250 mm Distance between centers 1500 mm Spindle bore 63 mm Spindle mount, DIN 55027 Size 6 Spindle speeds (2-speed, stepless) 1 - 650 / 1 - 2,500 rpm Feeds (X/Z) 5000 mm/min Rapid traverse (X/Z) 7 / 6 m/min Taper in quill MK 5 Quill stroke 160 mm Quill diameter 70 mm Drive power 16 kW Machine dimensions L x W x H 3200 (length without chip conveyor) x 1800 x 1400 mm Machine weight 3200 kg Accessories / Special features: • Cycle control: HEIDENHAIN Manual Plus Bedpfx Ajz Icrgjktslp o Color screen o The machine can be operated manually using electronic handwheels and a position display, or with o CNC 2-axis cycle control MANUAL PLUS o 2D simulation, fast and reliable control o RS 232 interface o Graphically supported, dialogue-based programming o A color screen displays the current axis positions with residual value display, as well as the input of cutting data, cutting speeds (also constant), target points (absolute & relative) with graphical cycle check and simulations. Pre-programmed work cycles for complex shapes with curves or chamfers, thread or grinding cycles according to DIN; threads (metric, multi-start, tapered threads), boring and grooving. • 3-jaw chuck, diameter 250 mm • Chip conveyor • Hardened and precision-ground bed guides, main spindle, gears and shafts • Chuck guard, electrically protected • Quick-change tool holder system „MULTIFIX“ Size C • Protective guard with safety device, laterally sliding • Manual tailstock • Coolant system • Central lubrication • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Fanuc A06B-0127-B177 AC servo motor, serial number: C945C3795, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bledpfe Adx E Uex Aktop

Condition: ready for operation (used), Fanuc A06B-0123-B177 AC servo motor, serial number: C973C6232, used, in good condition, 100% functional. Scope of delivery as shown in the photos. Bedpe Adx E Ijfx Aktolp

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC-Steuerung Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Blodpfo Ahkuvjx Aktjp Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: used, Year of construction: 1999, turning diameter 800 mm turning length 2000 mm control MONFORTS control Control System MTC-K centre height 400 mm centre distance 1970 mm swing over bed 830 mm swing diameter over slide rest 540 mm spindle bore 135 mm face slide travel 450 mm spindle turning speed range 2 - 1600 U/min transmission ratio 4 feed power X/Z axis 11,3 / 23,9 kN rapid traverse X-axis 4 m/min rapid traverse Z-axis 6,8 m/min Blsdpfj Adu S Djx Aktjp tailstock quill diameter 125 mm tailstock quill stroke 200 mm tailstock taper MT 6 total power requirement 53 kVA weight of the machine ca. 6 t dimensions of machine L x W x H 4,35 x 2,17 x 2,10 m Accessories: 3-jaw chuck 630 mmø, MULTIFIX head "D", various tool holders, chip conveyor, coolant

Condition: used, Year of construction: 2000, Technical details: turning diameter: 800 mm turning length: 2965 mm max. turning dia. over saddle: 520 mm spindle bore: 92 mm turning speed range: 3 - 1800 U/min Blodpfxsxxig Ue Aktep spindle head: Größe 11 total power requirement: 37 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 5,2 x 2,2 x 1,9 m Teach In Control MTC-K 3-jaw chuck ROTAS Dia. 400 mm face plate RÖHM Dia. 630 mm 4-station toolholder system PARAT 1 fixed steady coolant attachment and chip conveyor *

Condition: used, REGATRON Programmable DC power supply / Industrial power supply unit REGATRON TopCon Quadro 3 × 32 kW – total 96 kW rated power – 0–400 V DC – 0–100 A per unit For sale is a used industrial DC power supply system with three programmable REGATRON TopCon Quadro DC power supply units in an industrial control cabinet. The system is suitable for industrial testing and measurement applications, development, research, and the supply of electrical loads. Technical data: Manufacturer of power supply units: REGATRON AG Series: TopCon Quadro Type: TC.P.32.400.400.S.HMI Unit type: Programmable DC power supply Number of power supply units: 3 Year of manufacture of control cabinet system: 2016 (according to nameplate) Electrical data per power supply unit: Rated power: 32 kW DC output voltage: 0–400 V DC output current: 0–100 A Mains connection: 3 × 400 V AC Mains frequency: 48–62 Hz Input current according to nameplate: 3 × 60 A Total equipment: 3 × REGATRON TopCon Quadro power supply units Installed rated power: 3 × 32 kW = 96 kW The actual available total power and output configuration depend on the existing wiring and parameterization. A combined 96 kW output configuration has not been verified. Control and regulation: Programmable output voltage Programmable output current Power regulation Constant voltage operation (CV) Constant current operation (CC) Constant power operation (CP) HMI control panels with LCD displays Rotary and control buttons RS232 interface according to data sheet Status and error indicators Equipment: Industrial control cabinet 3 × REGATRON TopCon Quadro DC power supply units Main switch Electrical protection and switching elements Bodpfx Ae Ad Ia Ijktslp Internal wiring and connection components Fan cooling RITTAL power socket strip KEMET components in the control cabinet Lifting points / transport eyes Other installed components as shown in the pictures Application areas: Industrial test benches Electrical load and supply tests Research and development Power electronics Laboratory and test systems Industrial DC power supply Scope of supply: 1 × Industrial control cabinet with 3 × REGATRON TopCon Quadro TC.P.32.400.400.S.HMI Integrated electrical installation and accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear are present Dimensions and weight: Per REGATRON power supply unit (H × W × D): 400 × 483 × 525 mm (housing, without connections) Weight per power supply unit: approx. 64 kg according to data sheet Weight of the three power supply units together: approx. 192 kg External dimensions of the entire control cabinet: not determined Total weight of the system including the control cabinet: not determined Collection or shipping by forwarding agent possible after consultation. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), axle configuration: 3 axles, first registration: 07/2018, suspension: air, color: blue, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Air suspension = Further Information = General Information Year of manufacture: 2018 Axle Configuration Suspension: Air suspension Rear axle 1: Steerable Rear axle 2: Steerable Rear axle 3: Steerable Weights Unladen weight: 14,300 kg Payload: 32,700 kg GVW: 47,000 kg Maintenance, History and Condition APK (Technical Inspection): valid until 03/2027 Technical condition: good Optical condition: good Vehicle number: Low-loader: 05 Goldhofer MPA 3 / 3-axle PBW Steerable / With remote control / Extendable .: WG0MPA037J0039094 TÜV: 03/2027 - Inspection: 09/2026 PBW 3 x Steerable axles Hydraulic ramps Remote control Unladen weight: 14,300 Total weight: 47,000 Bodpfo Ahuq Esx Aktslp Length: 8.90 m, with extension 12.00 m, total extended length 15.40 m Width: 2.54 m No liability for printing and typographical errors, changes, sales subject to prior sale and errors. = Company Information = No liability for printing and typographical errors, changes, sales subject to prior sale and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: ready for operation (used), Control Techniques SA038 SPINDAX AC spindle drive, serial number as shown in the photo, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Bljdpfoi D Um Eex Aktop

Condition: ready for operation (used), Fanuc A06B-0143-B075 AC servo motor, serial number: C015A4970, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bljdpfx Ako Adx Hfetop