Used Pattern Makers Lathe for sale (5,904)

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, turning length: 250 mm, turning diameter: 150 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 150 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 285 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 25 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle motor power: 7.5 kW Spindle bore: 45 mm Spindle nose: A2-5 Spindle speed: min. 60 rpm Spindle speed: max. 6,000 rpm Turning diameter: 150 mm Turning length: 250 mm Chuck outer diameter: 203 mm Swinging diameter over cross slide: 150 mm Swinging diameter over compound slide: 250 mm X-axis travel: 150 mm Y-axis travel: 60 mm Z-axis travel: 285 mm Hedpfe Afxtzjx Airew Rapid traverse Z-axis: 25 m/min Rapid traverse X-axis: 20 m/min MACHINE DETAILS Input current type: Three-phase Dimensions and weight Dimensions (L x W x H): approx. 2,000 x 1,700 x 2,000 mm Machine weight: approx. 4,000 kg EQUIPMENT Documentation/Manual

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9611-1806, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 9611-1806 Control system: Siemens SINUMERIK Electrical Data Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Working Area Maximum turning height: 1,240 mm Maximum turning length: 2,000 mm Spindle bore: 130 mm Chuck diameter: max. 130 mm Torque: max. 460 Nm Cross slide travel: 200 mm Tool Holder Tool holder: VDI 40 Tailstock Taper: MK 5 Tailstock diameter: 90 mm Automatic tailstock quill travel: max. 150 mm Transport Transport: possible on a standard truck EQUIPMENT Workshop cabinet Large quantity of VDI 40 tool holders Coolant system Loading system Hedpfx Aez Uql Aeirsw

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 0307-1866 Operating hours: 9,316 h Control system: Siemens SINUMERIK 840 Dsl Working height: approx. 1,300 mm Electrical Data Operating voltage: 400 V Frequency: 50 Hz Rated current: 315 A Workpiece Area Workpiece length: min. 780 mm Workpiece length: max. 3,000 mm Workpiece diameter: min. 20 mm Workpiece diameter: max. 200 mm Workpiece weight: max. 250 kg Workpiece Drive and Clamping Workpiece drive/clamping: 2 × hydraulically actuated front chucks, manufacturer SAV Chuck bore: max. 210 mm Spindles Spindle power: 2 × 37 kW Speed: 2,200 rpm Cross slide NC1, left X1-axis: 450 mm Z1-axis: 1,980 mm Cross slide NC2, right X2-axis: 450 mm Z2-axis: 1,980 mm M-head slide Q1-axis, left: 1,980 mm Q2-axis, right: 1,980 mm Hjdpfx Aioz Uhydsrow Tailstock and steady rest slide W1-axis, left: 1,980 mm W2-axis, right: 1,980 mm Rapid Traverse Rapid traverse speed: max. 20 m/min EQUIPMENT Portal loading system PROMAT 2 loading units Chip conveyor Coolant system Matching VDI 50 tool holders Partially powered VDI 50 tool holders Chuck jaws Documentation

Condition: excellent (used), Year of construction: 1997, operating hours: 48,889 h, functionality: fully functional, center width: 1,000 mm, center height: 280 mm, spindle speed (max.): 2,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum height: 280 mm Distance between centers: 1000 mm Hedpfx Ae Afxxboirew Swinging diameter: 500 mm Diameter of rotation over bed: 570 mm Diameter of rotation over support: 340 mm Spindle speed max.: 2500 RPM MACHINE DETAILS Operating hours: 48,889 h EQUIPMENT Chuck

Condition: used, Year of construction: 2005, type of input current: three-phase, We offer a used Haas SMINIMILL HE CNC lathe, built in 2005. Manufacturer: Haas Automation, Inc. Model: SMINIMILL HE Serial number: 41201 Date of manufacture: 4/05 Voltage: 360–480 V Phase: 3 Frequency: 50/60 Hz Hjdpfx Aij Agcwhsrow Full-load current: 20 A Largest load current: 35 A Short-circuit interrupting capacity: 10000 A Wiring diagram: 96 / 8100 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Commodor lathe with lead screw and tailstock, equipped with a 3-axis digital display Heidenhain ND780. In very good condition!!! Technical data: >> Year of manufacture 1991, Machine No. 3120 >> Center height 180 mm >> Distance between centers 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore 56 mm >> Short taper spindle head DIN 55027 size 6 with bayonet lock >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 kW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from Heidenhain ND780 >> 3-jaw chuck 200 mm, 1 set of jaws >> Mulifix size B with 2 steel holders >> Drill chuck Hjdpfxj Agnrgs Airow >> Bed stop >> Machine feet About the machine: Offered is a Weiler Commodor lathe in very good, fully functional condition. The machine comes from a state-owned company where it was used very little. The Commodor is one of the largest manual lathes manufactured by Weiler. A very robust and powerful machine. The 3-axis digital display from Heidenhain makes working with it even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: used, Year of construction: 2000, overall weight: 1,500 kg, This FAMOT universal lathe, type: EUROPA, will be auctioned off in our online industrial auction / machine auction focusing on warehouse clearance of industrial machines – injection molding machines, CNC machining centers, universal lathes, and more. You can find this and many other items on our platform. Hods Agi Ipjpfx Airew

Condition: used, Year of construction: 2000, overall weight: 1,500 kg, This FAMOT universal lathe, type: EUROPA, will be auctioned off in our online industrial auction / machine auction focusing on warehouse clearance of industrial machines – injection molding machines, CNC machining centers, universal lathes, and more. Hodpj Agizbefx Airow You can find this and many other items on our platform.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Wemas Type: HITURN Year of manufacture: 1999 Machine number: 180 Machine type: Cycle lathe Control System Control system: Heidenhain Electrical Data Operating voltage: 380 V Frequency: 50 Hz MACHINE DETAILS Performance Connected power: 11 kW Dimensions and Weight Length: 3,000 mm Width: 2,000 mm Height: 1,800 mm Weight: 3,000 kg EQUIPMENT Hsdpfo Advbysx Airjw Tailstock Multifix tool holder Steady rest

Condition: used, Year of construction: 1970, machine/vehicle number: 1421, Used lead screw and feed screw lathe WEILER LZ 330 Center height: 155mm Hsdpfj Agnmqex Airew Center distance: 800mm Spindle bore: 36mm Spindle speeds: 30-2,050 rpm 1 x 3-jaw chuck, diameter 160mm, coolant system, bed stop, manual clamping device (pull rod) with 14 collets, chip shield, quick-change tool holder size B with 1 insert, machine light. Digital display on the X-axis. The machine has been partially overhauled and repainted. The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. An inspection of the machine can be arranged.

Condition: good (used), Year of construction: 2012, CNC lathe TAKANG TNC-N200DS-B Control: Fanuc 0i-TD Configuration: Twin spindle, inclined bed, 12-station servo turret Swing over bed: Ø 650 mm Max. machining diameter: Ø 490 mm Max. machining length: 510 mm Main spindle nose: A2-6 Main spindle bore: Ø 61 mm Main spindle bar capacity: Ø 51 mm Main spindle bearing (ID): Ø 100 mm Main spindle hydraulic chuck: 8″ Main spindle speed range: 42 – 4,200 rpm Sub spindle nose: A2-5 Sub spindle bore: Ø 56 mm Sub spindle bar capacity: Ø 45 mm Sub spindle hydraulic chuck: 6″ Sub spindle speed range: 60 – 6,000 rpm Sub spindle stroke (E axis): 500 mm Turret: 12 stations, servo X-axis travel: 280 mm Z-axis travel: 560 mm Rapid traverse X / Z: 20 m/min Tool change time: 0.2 sec Tool holder: □ 20 mm Max. boring bar: Ø 32 mm Main spindle motor: Fanuc 18iP, 9 / 11 kW Hedpfx Ao Agcrgsirew Sub spindle motor: Fanuc 6i, 5.5 / 7.5 kW Hydraulic pump / tank: 1.5 kW / 60 l Coolant pump / tank: 750 W / 100 l Machine weight: 7,030 kg Year of manufacture: 2012 (July) Manufacturer: CNC-Takang, Taiwan For more information, please contact us.

Condition: used, Year of construction: 2018, functionality: fully functional, turning length: 1,180 mm, turning diameter: 560 mm, spindle bore: 117 mm, rotational speed (max.): 2,000 rpm, Hyundai WIA L400MC CNC lathe Year of manufacture: 2018 Control system: Fanuc 32i model B Maximum turning diameter: Ø 560 mm Maximum turning length: 1180 mm Spindle bore diameter: Ø 117 mm Hodpfx Ae Af Ig Reirow Chuck size: Ø 381 mm (15") Maximum spindle speed: 2000 rpm Spindle motor power (max./continuous): 37 / 30 kW Spindle torque (max./continuous): 3073 / 2490 Nm Spindle drive: Belt drive with two-stage gearbox Spindle taper: A2-11 C-axis: 0.001° Travel distances X-axis: 320 mm Z-axis: 1200 mm Rapid traverse X/Z: 20 / 25 m/min X/Z guideways: Box – slideways 12-tool turret, BMT 75P C-axis, powered tools Motor power (max./continuous): 7.5 / 5.5 kW Maximum speed: 4000 rpm Torque (max./continuous): 44.7 / 35 Nm Collet size: Ø 26 mm (ER40) Tailstock Tailstock taper: MK5 Spindle diameter: Ø 150 mm Spindle travel: 132 mm Tailstock travel: 1100 mm Equipment: - Chip conveyor with tank and pump - 2 powered tool holders (1 straight, 1 angled) - 8 standard tool holders

Condition: used, Year of construction: 2019, operating hours: 7,000 h, Hyundai Wia HD2600Y CNC lathe with Y-axis Fanuc I series with Manual Guide 250mm chuck 81mm spindle bore • Maximum turning diameter: Ø300 mm (11.8″) • Maximum turning length: 610 mm (24″) • Chuck size: Standard 10″ • X-axis travel: 215 mm • Y-axis travel: 110 mm (± 55 mm) Hedpfx Aie Agvuxorew • Z-axis travel: 680 mm • BMT 55 turret for 12 tools -Measuring probe -Part catcher -Tailstock -Documentation -Chip conveyor included -2 powered tool holders (1 angled, 1 straight)

Condition: used, Year of construction: 1973, functionality: fully functional, turning diameter over bed 630-640 mm turning diameter over slide rest ca 380 mm turning length ca 2000-4000 mm total power requirement 15 kW weight of the machine ca. 7-8 t Hsdeztfwrepfx Airjw

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 01190000341, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period from November 16 to November 26. TECHNICAL DETAILS General Information Machine number: 01190000341 Operating hours: 57,730 h Control system: Heidenhain CNC Pilot Electrical Data Operating voltage: 400 V Frequency: 50 Hz Connected load: 58 kVA Rated current: 100 A Working Area Turning length: 1,000 mm Maximum diameter over the machine bed cover: 680 mm Maximum diameter over the guide cover: 455 mm Cross travel: 320 mm Longitudinal travel: 1,097 mm Main Spindle Spindle diameter: 220 mm Spindle head diameter at the front bearing: 140 mm Spindle bore: 107 mm Chuck diameter: 400 / 500 mm Speed range: 4–2,800 rpm C-axis Speed: max. 100 rpm Feed and Rapid Traverse Feed force X-axis: 8 kN Feed force Z-axis: 15 kN Rapid traverse X: 24 m/min Rapid traverse Z: 30 m/min Tool Turret Tool turret: 12-station Clamping Device 3-jaw chuck: Forkardt Chuck diameter: 300 mm EQUIPMENT 12-station tool turret Tool holders in the tool turret 3-jaw chuck by Forkardt Work table Documentation Hodpfx Aez Uwzwoirow Chip conveyor Extraction system

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, from a vocational training workshop, CE compliant, in excellent condition!!! Technical data: >> Year of manufacture: 2013, Machine no. D4D 130601 >> Center height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed stages from 40-3000 RPM, infinitely variable >> Quill stroke: 120 mm >> Tailstock: MK3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Footprint / Dimensions approx.: Length 1,600 x Depth 0.9 x Height 1.3 meters >> Weight approx.: 750 kg Accessories and equipment: >> 3-axis position indicator >> 1 three-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm >> 1 four-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm >> 1 quick-change tool holder without collets Hjdpj Afxm Uofx Airew >> Steel tool rest with 2 pockets >> Chip guard >> Coolant system >> Bed stop About the machine: Offered for sale is an Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, in well-maintained condition. The machine is fully functional, of course. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to inspect this machine on-site while it is powered on and to convince yourself of its condition.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS TURNING CAPACITY Turning length: approx. 1,000 mm Center height above bed: 200 mm Turning diameter above bed: 400 mm Center height above tailstock: 120 mm Turning diameter above tailstock: 240 mm SPINDLE Spindle bore: approx. 38 mm MACHINE DETAILS MACHINE DATA Machine type: Lead and feed screw lathe Manufacturer: Kern DIMENSIONS AND WEIGHT Length: 2,300 mm Width: 1,000 mm Height: 1,600 mm Weight: 1,000 kg Hsdpo Ad Ha Tjfx Airsw EQUIPMENT Tailstock Steady rest

Condition: not inspected (used), Year of construction: 2000, machine/vehicle number: 3244.00, total length: 2,700 mm, total width: 1,500 mm, total height: 2,000 mm, overall weight: 2,800 kg, DMT Kern CD 480 Lathe Technical specifications: Control system: Heidenhain Manual Plus 3110 Working area: Swinging diameter over bed: 475 mm Swinging diameter over cross slide: 260 mm Cross slide travel: 260 mm Distance between centers: 1,000 mm Turning length: 880 mm Headstock: Spindle head DIN 55026: Size A6 Spindle diameter in the front bearing: 115 mm Spindle bore: 78 mm Standard chuck sizes: 200/250 mm Speed range (constant speed): 1–3,000 rpm Cross slide: Rapid traverse in X-axis: 0.001–1000 mm/rev Rapid traverse in Z-axis and threading: 0.001–2000 mm/rev Rapid traverse X/Z: 5/10 m/min Hedpfx Aij Af U Icjrow Tailstock: Tailstock spindle diameter: 70 mm Tailstock spindle travel: 120 mm Tailstock spindle taper: MK 5 Scope of delivery: No further accessories Dimensions & weights: Overall dimensions L x W x H approx.: 2700 x 1500 x 2000 mm Weight approx.: 2800 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ►Upon request, we can offer transport to the desired location. ►The quoted price is net plus VAT. ►The goods are sold excluding any warranty. ►Technical data subject to change. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Weiler Praktikant 160 B, lathe with guide and draw spindle, year of manufacture 2000, with 3-axis digital display K&C, NEW, CE marking!! Technical data: >> Year of manufacture 2000, machine no. 4651 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Hodpfxo Afxq Ss Airow Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeroing, switching the counting direction >> Quick-change tool holder, collets from 2 to 28 mm, increasing in 1 mm steps >> 3-jaw chuck 160 mm Röhm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> Electric chuck guard >> Bed stop, drill chuck >> Back wall >> Machine feet >> Coolant system >> Operating manual, parts list (PDF) About the machine: Offered is a Weiler Praktikant 160 B lathe with guide and draw spindle, year of manufacture 2000, in very good condition. The machine is fully functional and has CE marking. All slides run very smoothly and evenly. The Weiler comes from a training workshop. Even at high speeds, the Weiler runs smoothly. This newer generation of Weiler lathes is very user-friendly and allows for the production of surfaces that appear to be ground. Take the opportunity to inspect this machine on site and under power to convince yourself of its condition.

Condition: like new (used), Year of construction: 2022, operating hours: 400 h, functionality: fully functional, turning length: 1,030 mm, turning diameter: 460 mm, spindle bore: 81 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 1,100 mm, Doosan Puma GT2600LM, 2022. Machine with only 400 operating hours. Excellent condition. Fanuc 0i-F Plus iHMI-Touch control with Manual Guide. Max. turning length: 1030 mm Max. turning diameter: 460 mm Chuck: 250 mm Spindle bore: 81 mm Hsdpfs Aba D Hjx Airow Spindle: ASA A2-8 Max. spindle speed: 3500 rpm Motor: 18.5/22 kW 12-tool turret, BMT 55 Axis travels: -X: 265 mm -Z: 1100 mm -C: +-360° Live tooling Renishaw tool probe Tailstock Part catcher Included with the machine: - Chip conveyor with collection tank - High-pressure pump - Documentation - 4 live tooling holders (2 angular, 2 straight)

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Manufacturer: WEISSER HEILBRONN Type: 29 Machine type: Lead and feed spindle lathe TURNING RANGE Turning diameter over bed: 420 mm Turning diameter over cross slide: 240 mm Turning length: 1,150 mm Center height: 210 mm SPINDLE AND FEEDS Spindle bore: 40 mm Longitudinal feed: 0.05–0.71 mm/rev Cross feed: 0.025–0.355 mm/rev TAILSTOCK Arbor size: MK 4 Arbor travel: 195 mm MACHINE DETAILS Dimensions (L × W × H): 3,000 × 1,500 × 1,500 mm Hedpfx Aie Ad E H Serjw Weight: 1,500 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B guide and pull spindle lathe with 3-axis digital display from K&C, from a vocational school. Technical data: >> Year of manufacture 1992, machine no. 92 160 3220 >> Center height 160 mm >> Center distance 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5 with bayonet lock >> Tailstock MK 3 Hode Afyg Nspfx Airew >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be activated >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, ABS/INC coordinate selection, halving the display value, reference mark, tool programming 200 items, taper calculation, radius/diameter, quick zeroing, switching the counting direction, >> 3-jaw chuck 160 mm with 2 sets of jaws >> 4-jaw chuck with 2 sets of jaws >> 3-jaw chuck with individually adjustable jaws >> Multifix A with 2 steel holders >> Bed stop, drill chuck >> Electronic spindle protection >> Rear panel >> Coolant system >> Operating manual, parts list About the machine: Offered is a Weiler Praktikant 160 B guide and pull spindle lathe, manufactured in 1992 with toolmaker precision, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as ground. Take advantage of the opportunity to inspect this machine on-site while it is powered and convince yourself of its condition.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS SWING Swing length: approx. 1,200 mm Center height above bed: 240 mm Swing diameter above bed: 480 mm Center height above tailstock: 150 mm Swing diameter above tailstock: 300 mm SPINDLE Hede Ad Hchspfx Airjw Spindle speed: 140–1,800 min⁻¹ Spindle bore: approx. 38 mm MACHINE DETAILS MACHINE DATA Machine type: Lead and feed screw lathe Manufacturer: VDF Boehringer DIMENSIONS AND WEIGHT Length: 3,500 mm Width: 1,000 mm Height: 1,600 mm Weight: 1,000 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, CNC-controlled lathe with driven tools, a parts handling arm, an eye for automatic tool referencing, a chip conveyor, and a material feeder. Commissioned in 11/2014 OSP-P300L CNC control system with a 15" color touchscreen Machine hours: Power-on time: 65,458 hours as of March 18, 2026, NC operating time: 36,054 hours Spindle rotation time: 19,533 hours Cutting time: 16,582 hours Continuously increasing. Power consumption: 33.1 kVA Technical data Max. swing diameter: 480 mm (approx. depending on the current design of the parts handling arm) Max. machining diameter: 340 mm Max. turning length: 785 mm Collet chuck + 10" hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) Hydraulic through-bore cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 connection, 80 mm bore, integrated motor Speed range: 45 - 5,000 min.-1 Power/continuous operation: 22 kW/15 kW Continuously controlled C-axis, 360° with 0.001° increment Sub spindle Speed range: 50 – 6,000 min-1 Power/continuous operation: 11 kW/7.5 kW Spindle with 140 mm connection, 62 mm bore, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet chuck + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) Hydraulic through-bore cylinder SS1243, draw tube Sub spindle travel – NC axis W, travel for W450: 595 mm Spring-loaded part ejector from the sub spindle Overload protection for W-axis (drive torque) Tailstock mounting in the sub spindle Turret Number of tool stations: 12, fixed and driven, BMT60 (not VDI) Tool shank diameter: 25 x 25 mm Tool shank outer diameter: 40 mm Driven tools Drive power: 7.1/4.1 kW Speed range: 45 – 6,000 min.-1 Feed rates Rapid traverse in X and Z axes: 25/30 m/min. Rapid traverse in C axis: 200 rpm Travel X-axis: 260 mm Z-axis: 510 mm Y-axis: 115 mm (+70 mm / -45 mm) Machine data Width: 3330 mm – without feeder and conveyor Depth: 1800 mm Height: 2250 mm Machine weight: 5,250 kg Accessories: OSP-P300L Advanced One Touch CF-M-E package including: Coordinate transformation function Profile generation function Advanced One Touch IGF Where N Hwxez Hk R Ue Nou 3D machining process simulation Machining time overrun control Load monitoring (spindle, feed axes) NC operation monitoring (including part count) Cycle time reduction function Hi-Cut Pro function Spindle speed control function High-pressure coolant, max. 20 bar, max. 50 l/min Hjdpfx Aio Abw U Aorow Material feeder ILS type MUK 7012, with bar magazine 6-70 mm/1250 mm, year of manufacture 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn. FILTERMIST FX4002 extraction system Machine equipment: Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on the main spindle) collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -29-30 31-32-34-35-36-38-39-40-41-42-44-45-46-48-50-51-53-55-57-60-64-6 5 Grooved collets diameter (mm): 55-60-65 Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on the sub spindle) collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -30 31-32-34-35-36-39-38-40-41 Tool holders: Axial tool holder - 5X Turning tool holder - 5x Boring bar holder - 2X Front steady rest, double-sided - 3X Rear steady rest - 3X Reduction sleeve (manufactured from stock material) Reduction - nylon, diameter (mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52 The machine is regularly serviced.

Condition: used, total length: 4,100 mm, total width: 1,900 mm, total height: 1,850 mm, Year of manufacture: 1997 Colour: Blue Empty weight: 5.000 kg Price: On request - Year: 1997 - Documentation available: Yes - CE marking present: Yes - Serial number: 9712854F - Drive system: Teach-in - Power [kW]: 14.0 - Centre height [mm]: 275 - Swing over bed [mm]: 550 - Carriage turning diameter [mm]: 360 - Distance between centres [mm]: 2000 - Bed width [mm]: 360 Hsdpj Agwr Rsfx Airjw - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 180 - Max. spindle speed [rpm]: 2500 - Options: Fixed steady, Three-jaw chuck, Travelling steady, Quick-change tool post - Transport dimensions: 4100mm x 1900mm x 1850mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum