Used Pdl 3000 for sale (4,750)

Condition: used, all stainless steel electrically heated, 90 kW net belt length 3.000 mm net belt width 600 mm frying time min/max : 25/250s with lower and upper belt sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm suitable for fire protection weight : 2.750 kg oil level control circulation pump with Teflon infeed belt Cpedpfx Asygli Aefpsu

Condition: used, suitable for thermal oil heating (= 131 kW) 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump Cpodpjyglipjfx Afpsu oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel electrically heated 72 kW heating capacity 75 kW total connected power net frying length : ± 3.000 mm net belt width : ± 500 mm in- and outfeed belt teflon infeed belt adjustable speed sediment removal system filter Cjdpfjyglicox Afpjpu suitable for fire protection mechanical hoists dimensions (l x w x h) : ± 6.300 x 1.700 x 3.100 mm

Condition: good (used), Year of construction: 2013, machine/vehicle number: AKA0003767, fuel type: diesel, color: black, power: 11 kW (14.96 HP), Year of manufacture: Jun 2013 Model year: 2013 Field of application: Construction Empty weight: 857 kg Technical condition: good Visual appearance: good Damages: none 8x Thermo-King 2013 Clip-on SG 3000: - ID 10756 - 12.148 hours - ID 10757 - 14.130 hours - ID 10760 - 11.946 hours - ID 10762 - 12.586 hours - ID 10763 - 13.047 hours - ID 10764 - 12.474 hours Csdewp R A Ijpfx Afpepu - ID 10766 - 11.146 hours - ID 10767 - 13.103 hours All units have been serviced at this hours. Check our website for actual availability:

Year of construction: 2010, operating hours: 51,200 h, condition: ready for operation (used), screw diameter: 80 mm, This Krauss Maffei CX 650-3000 was manufactured in 2010. A robust hydraulic injection moulding machine, it features a screw diameter of 80 mm, 6 core pulls, and 6 pneumatic needle actuators. It includes an LRX 250 handling system with 4 vacuum and gripper circuits. Known defects include leaks and a non-regulating low-pressure pump. Contact us for more information about this machine. • Core pulls: 6 • Pneumatic needle actuators: 6 • Internal mold heaters: 12 • Cooling water circuits: 6 + 6 • Operating hours: approx. 51,200 h • Pump hours: approx. 61,500 h • Known defects: • Leaks at the upper operator-side frame • Leak at the injection unit • Low-pressure pump no longer regulates accurately Additional equipment Codpfxoyffcae Afpjpu • LRX 250 handling system • 4 vacuum circuits • 4 gripper circuits

Condition: good (used), Code: 0217 Brand: SAMCO Model: F 3000 Belt sanding machine with double gooseneck and 3 motors, for wood, carpentry, metals, aluminum, composite materials, and various other materials Cpsdexivycspfx Afpsu Technical data: Table length mm 3000 Table width mm 800 Vertical adjustment of table mm 850 2-speed belt motor rpm 1400/2800 - Hp 3/4 Automatic table lifting Sanding belt length mm 8000 Sanding belt width mm 120 Gooseneck useful depth mm 600 Gooseneck height mm 200 Overall dimensions mm 4300 x 1500 x 1800 h Weight kg 740

Condition: used, functionality: fully functional, Year of construction: 1965, machine/vehicle number: Type: BT10x3000; Fab. Nr. MBO-559, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, overall weight: 11,500 kg, cutting length (max.): 3,000 mm, Guillotine shears, guillotine shears, VOEST BT 10 x 3000 Year of manufacture 1965 Cedpfsv Igipex Afpjpu Cutting thickness 10 mm Cutting length 3000 mm Power 25 HP Weight 11.5 tons Functional, on-site inspection and testing possible

Condition: ready for operation (used), Year of construction: 2011, clamping force: 4,200 kN, screw diameter: 80 mm, injection weight: 1,464 g, total height: 2,500 mm, overall weight: 25,500 kg, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, product length (max.): 7,300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine. Csdpfoydnp Hjx Afpepu • Electrical data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating power: 36 kW • Rated pump motor power: 75 kW • Number of barrel heating zones: 7 • Performance and control: • Dry cycles (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine color: grey / white / blue • Clamping unit: • Mold opening force: 249.6 kN • Distance between tie bars: 800 × 800 mm • Moving platen force (open/close): 124.7 / 102.4 kN • Platen dimensions: 1270 × 1200 mm • Mold opening stroke: 1020 mm • Minimum mold height: 380 mm • Ejector stroke: 250 mm • Platen opening stroke: 1400 mm • Injection unit: • Nozzle tip radius: 15 mm • Nozzle orifice diameter: 6 mm • Injection pressure: 1856 bar • Injection volume: 1608 cm³ • Injection rate: 478 cm³/s

Condition: excellent (used), Trumpf Type: TruPrint 3000 G02 The machine is in very good condition and has been professionally tested for functionality by a TRUMPF technician at our facility. We provide a 6-week warranty on the machine. Year of manufacture: 11/2017 Beam-on hours: 17,731 Laser Metal Fusion Machine (Metal 3D Printer) Flexible solution for industrial additive manufacturing. The TruPrint 3000 is a universal mid-format machine (LMF / PBF / LPBF) with industrial-grade part and powder management. From now on, you benefit from even greater flexibility, quality, and productivity for your additive serial production: Productivity is nearly doubled, independent of part geometry, and part costs are significantly reduced. Automatic monitoring and calibration of the multi-laser system during the build job ensures optimal quality for printed multi-laser parts. The latest advancements in shielding gas guidance further improve part quality and reproducibility. This is documented in parallel with the build job via Melt Pool Monitoring, allowing compliance with requirements such as those in the medical sector. Highly flexible, the TruPrint 3000 can be adapted to your specific requirements. With a build volume of 300 mm diameter and 400 mm height, it can be used across a wide variety of industries. Depending on the size and complexity of the parts, your workflow preferences, and production volumes, you can flexibly choose between internal or external unpacking—all under inert gas. External unpacking further minimizes the 3D printer’s downtime via simultaneous main-time operations. Technical specifications: TruPrint 3000 Build volume (cylinder): 300 mm diameter x 400 mm height Processable materials: Weldable metals in powder form, such as stainless steels, tool steels, aluminum, nickel-base, cobalt-chrome, copper, titanium or precious metal alloys. Current materials and parameter availability on request. Preheating (standard): up to 200°C Maximum laser power at the workpiece (TRUMPF fiber laser): 500 W Laser spot diameter: 100 - 500 μm Layer thickness (adjustable): 20 - 150 μm Scan speed (powder bed): 3 m/s Build rate: 5 - 60 cm³/h Connections and consumption: Electrical connection (voltage): 400/460 V Electrical connection (current): 32 A Electrical connection (frequency): 50/60 Hz Shielding gas: Nitrogen, Argon Design: Dimensions (incl. filter) (W x H x D): 3385 mm x 1435 mm x 2225 mm Weight (incl. powder): 4300 kg The system has been dismantled by the manufacturer, with disassembly records and function logs available. All axes are professionally secured. The system has been used with materials 1.44.04 and most recently with AlSi10Mg. Condition: Used Csdpevvl I Tefx Afpopu Scope of delivery: (See picture) (Changes and errors in the technical data and listed specifications reserved!) We will be happy to answer additional questions by phone.

Condition: used, Used Kosme edible oil PET bottle filling line with capacity 3000 bottles / hour and including blow moulding equipment. Made in 2012 and with only approximately 72 hours of use. Last used on sunflower oil and suitable for bottles sized 1l (3000 BPH, press cap, hot melt label), 2l (2800 BPH, press cap, hot melt label), 5l (2000 BPH, screw cap, adhesive label) and 10l (1000 BPH, screw cap, adhesive label). Line includes the following equipment: - Kosme KSB 2XL/4F blow moulder. Preform neck dimensions: smallest neck 28mm, largest neck 48mm, neck ring diameter 53mm, neck height 22mm, max length (under neck ring) 200mm. Preform bottle dimensions: max diameter 235mm, max height 430mm, base height 55mm. - Filler / capper model Weighblock 16/1440 6/540 P. - Labeller model Extra HM 4/720 Sa1 E1. - Packer model Acepack 2/4T. - Carton erector model Formapack H. - Carton sealing unit model Sealpack H. - Palletiser and stretch film wrapper. - Coders, handle applicators, elevators and conveyors. Cpedpfx Aeyhc Sdsfpsu - (8) 25000 litre oil tanks, compressor, dryer, air tank, spare parts, auxiliary equipment and approximately 100,000 PET preforms.

Condition: used, tank capacity: 3,000 l, GENERAL INFORMATION Cjdpfxjxqbqcj Afpopu Design: vertical Outer diameter: 1,450 mm Inner diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 3,750 mm Heating/Cooling: available Power: 2.2 kW Agitator: anchor agitator Location: Bremen Cylinder temperature control: double jacket Volume: 3,000 liters Double jacket material: Steel Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,650 mm Last application: chemicals TANK Mounting type: feet Number of feet: 3 pcs HEATING/COOLING JACKET Temperature control of bottom: double jacket EQUIPMENT Manhole / dome: on top cover Outlet: 140 mm MATERIAL SPECIFICATION Flange material: steel Feet material: steel AGITATOR Voltage: 380 Volt Bottom bearing:

Condition: used, tank capacity: 3,000 l, GENERAL INFORMATION Design: upright Remarks: external steel components sandblasted and primed; top cover also heatable/coolable External diameter: 1,450 mm Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX directives under site-specific conditions must be verified) Total height: 4,300 mm Heating/cooling: available Power: 2.2 kW Agitator: anchor agitator Cylinder temperature control: double jacket Volume: 3,000 liters Double jacket material: steel Product-contacting material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 1,650 mm Last application: chemical industry TANK Base type: legs Number of legs: 3 units HEATING/COOLING JACKET Cpedpfx Afsxqbp Ejpsu Bottom temperature control: double jacket FEATURES Manhole / Dome: in top cover Outlet: 135 mm Note: minor adhesions MATERIAL SPECIFICATIONS Leg material: steel AGITATOR Voltage: 220/380 Volt Agitator positioning: centrally on top cover

Condition: new, Empty weight: 176.000 kg Codpfox D Dgyjx Afpepu Dimensions (LxBxH): 1500 x 1500 x 3500 cm Cargo space capacity: 2.200.000 l Wall thickness: 10 mm Thickness of end walls: 8 mm Thickness of partition walls: 6 Number of fillers: 2 1. SILO CAPACITY: 3.000 TONNES 2. SILO HEIGHT: 35 000 mm 3. SİLO DIAMETER: Ø 12.400 mm 4. QUANTITY OF SILO LEGS: 7 5. SILO OUTPUT DIAMETER: Ø 400 mm 7. SILO WEIGHT: 176.000 kg 8. MATERIAL OF SILO LEGS: Ø273 x 20 mm STEEL PIPE 9. SUPPORT OF SILO LEGS: NPL 80 mm 10. SHEET METALS OF SILO LEG: 20-25 mm 11. CONICAL PART SUPPORT MATERIAL: 160 mm STEEL C CHANNEL. 12. CONICAL PART MATERIAL: ST- 37, 10 mm SHEET METAL 13. SILO BODY MATERIAL: ST -37, 10 - 8 - 6 -5mm SHEET METAL 14. TOP COVER MATERIAL OF SILO: ST -37, 5 mm SHEET METAL. 15. INNER MAN HOLE IS INCLUDED. 16. OUTER MAN HOLE IS INCLUDED. 17. SILO ROOF INCLUDES PAREPETS. 18. MAINTENANCE PLATFORM IS INCLUDED. 19. CHARGING PIPE: 4’’ PIPE UP TO SILO LEG. 20. STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS. Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 140 microns

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Bed width 480 mm Main spindle: Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Cpsdpeydiy Hefx Afpeu Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg In the chuck: 750 kg Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102, 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Coolant system Work area enclosure with two sliding doors. Machine length 5700 mm, with swarf converyor 7400 mm Machine width 2100 mm

Condition: used, Year of construction: 2007, functionality: fully functional, 3 axe machine Siemens Sinumerik 840 D 1000 rpm Cpsdpfxex Uqp Se Afpsu Table 3300 x 950 mm X axe 950 mm Z axe 1750 mm Table loading 4000 kg

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Türkei 24400 € 468.48 € 3000 kg 150 mm 150 mm 360 ° 135 kgm 400 / 50 V / Hz 1.1 kW Cpodpfx Aex Urqdsfpeu 1.1 kW 1200 mm 700 - 950 mm The hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted to the floor. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer.

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Cpedpfsvvkmbex Afpeu

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Cpedovvkblspfx Afpsu Storage location: Nattheim

Condition: used, Year of construction: 2004, power capacity 30/37 kW Cjdox I Sd Ropfx Afpopu volt 380 V ampere 70/78 A

Condition: excellent (used), Year of construction: 1980, I will sell a brush sander in good condition. - 1500/3000rpm. - 380V. Codpfev T Tq Rex Afpepu

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, Equipment: 4 in one shovel, The machine is in very good technical condition, inspection under power possible by prior arrangement. Chip conveyor, high-pressure cooling, CNC control system Sinumerik 840D SL. Cpedexcu Ewopfx Afpju

Condition: used, Year of construction: 2010, tank capacity: 3,000 l, GENERAL Equipment: Level indicator (without guarantee), crane lugs Design: vertical Year of manufacture: 2010 Remarks: Partially small dents Internal diameter: 1,200 mm Total height: 4,100 mm Location: Bremen Technical documentation: Drawing Nameplate: Volume: 3,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,000 mm Cedpfx Afoyclk Eopepu Last use: chemicals TANK Support type: Feet height-adjustable Number of feet: 3 pcs EQUIPMENT Manhole / access opening: in top head (DN 500) Outlet: 26 mm MATERIAL Feet material: stainless steel

Year of construction: 2013, condition: excellent (used), Dough mixer 4500/3000 Codpjx Htb Ujfx Afpjpu

Condition: used, tank capacity: 3,000 l, GENERAL Codpeyclagefx Afpepu Equipment: Venting/inlet and outlet, disc valve, crane eyes Type: upright Remarks: Manhole approx. 400 x 510 mm; 2 pipelines inside the tank Internal diameter: 1,600 mm Total height: 2,500 mm Agitator: agitator flange Location: Bremen Nameplate: Volume: 3,000 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,500 mm Last application: dairy TANK Mounting type: feet Number of feet: 3 pcs EQUIPMENT Manhole / dome: in cylinder Outlet: 83 mm Note: slight residue MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Agitator position: side-mounted on cylinder

Condition: used, tank capacity: 3,000 l, GENERAL Equipment: Disk valve, spray nozzle Design: upright Notes: Small dents and several small holes (corrosion) in the insulation jacket; 1 overflow pipe inside the tank; outlet pipe dented (see photos) External diameter: 1,930 mm Internal diameter: 1,690 mm Total height: 2,400 mm Insulation: present Top head: conical base Location: Bremen Cpodpfsyclaaex Afpeu Nameplate: Volume: 3,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,400 mm Previous application: dairy TANK Bottom: dished end Support design: feet Number of feet: 4 pcs INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in top head (DN 500) Outlet: 80 mm Remark: slight residues MATERIAL QUALITY Material of feet: stainless steel