Used Pellet Press for sale (12,401)

Condition: good (used), Year of construction: 1964, Pressing force: 5 t Stroke adjustable: 8 - 50 mm Ram adjustability: 25 mm Weight: approx. 500 kg Accessories / Special features: Bwedpfjy D Abfsx Aixjw • Adjustable table • Foot release Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: like new (used), functionality: fully functional, working width 3000 mm working height 2500 mm year of manufacture 1995 engine power 7 kW weight 2500 kg Bjdpfx Aszn Iqwsixoww power supply 380 V side cylinders and gearboxes adjustable from the control panel safety switch – shear pin CE marking

Condition: used, operating hours: 30,374 h, functionality: fully functional, machine/vehicle number: 000-0059085/3, overall weight: 997 kg, volume flow: 209 m³/h, power: 113.9 kW (154.86 HP), heating capacity: 99 kW (134.60 HP), smoke pipe connection diameter: 200 mm, nominal heat output: 113.9 kW (154.86 HP), space requirement length: 3,140 mm, space requirement height: 2,400 mm, space requirement width: 2,170 mm, temperature: 90 °C, total height: 2,310 mm, total length: 2,040 mm, total width: 860 mm, type of input current: three-phase, exhaust gas temperature (max.): 160 °C, input voltage: 400 V, negative pressure: 15 Pa, nominal power: 99 kW (134.60 HP), tank capacity: 10 l, input current: 13 A, operating pressure: 3 bar, Equipment: documentation/manual, hot water, KWB UNIT USV100 / Multifire – 99 kW biomass boiler Used Austrian boiler with KWB Comfort 3 controls, output modulation, lambda and negative-pressure control, automatic heat exchanger cleaning and ash extraction. Technical data: - Nominal heat output: 99 kW - Minimum output: 27.6 kW Bedpfx Aozhh Iieixoww - Fuel input: 113.9 kW - Water capacity: 167 litres - Maximum operating pressure: 3.5 bar - Maximum temperature: 90 degrees C - Weight: approximately 997 kg - Flue connection: 200 mm - Operating hours: 30374 h Data plate specifies 6 mm wood pellets. Wood chip operation depends on the installed extraction and conveying equipment. Exact equipment and scope of delivery by arrangement. Located in Mosonmagyaróvár, Hungary. Inspection by appointment. Transport, installation and commissioning by the buyer.

Condition: good (used), Code: 0374 Brand: ITALPRESSE Model: V/4 Mechanical cold press for wood, panels, doors, furniture, composite materials, technical materials, plastics, aluminium and various other materials Bwedpfoy If Rwex Aixsw Working dimensions 2200 x 1000 mm Platen dimensions: n° 2 platens 1100 x 1000 mm NEW aluminium sheets Option to work on a single table or on separate tables Opening 650 mm N° 4 pressure screws N°2 motors 0,75 Hp each Overall dimensions mm 2550 x 1000 x 1650 h Weight kg 870

Condition: ready for operation (used), Year of construction: 1995, Printing machines 2 colour offset printing machine KBA Rapida 72K Year 1994 Serial No. 65802317 Year 1995 Printing sections 2 Size of paper MAX 520 x 720 mm Size of paper MIN 210 x 297 mm Printing speed 17000 sheets/hour Bjdoyx Iyvepfx Aixjww Size of the printing plate 557 x 720 mm Size of the printing blanket 585 x 730 mm Counter 32 mios Current state: In production

Condition: used, total length: 3,600 mm, total width: 2,000 mm, total height: 2,800 mm, Year of manufacture: 2001 Colour: Red Weight: 5.500 kg Price: On request - Year: 2001 - Documentation available: Yes - CE marking present: Yes - Serial number: HFE50-20LV010254 - Drive system: CNC - Control system brand: Amada - Control system type: Operateur 2 CNC - Power [kW]: 6.0 - Number of axes [pcs]: 8: Y1+Y2+X1+X2+R1+R2+Z1+Z2 - Press force [ton]: 50 - Max. working width [mm]: 2090 - Column gap [mm]: 1665 - Throat depth [mm]: 400 - Max. stroke [mm]: 350 - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3600mm x 2000mm x 2800mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bjdozwvrzopfx Aixoww Lukas van Rossum

Condition: excellent (used), Catalog number: 7984 TECHNICAL DATA Bwodpozwwxcefx Aixow - Clamping force: hydraulic - Briquette shape: round - Briquette diameter: 70mm - Hopper diameter: 1000mm - Output: up to 10 briquettes/min, up to approx. 90 kg/hour - Automatic machine operation - Motor: 5.5kW - Dimensions (L/W/H): 1800x1200x1500mm - Weight: approx. 650kg ADVANTAGES - Made in Italy - Used briquetting machine - Unpainted - Very good condition Net price: 33900 PLN Net price: 7884 EUR, depending on an exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Catalog number: 7732 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1200 mm Bwjdpfszw Dbksx Aixjw - Capacity: approximately 70 kg/h - Automatic machine operation - Motor: 7.5 kW - Max. operating pressure: 150 bar - Dust extraction outlet: 90 mm - Diameter of the filter bag opening: 500 mm - Max. bag height: 900 mm - Dimensions (L/W/H): 1950x1400x2700 mm - Weight: 1130 kg ADVANTAGES – Made in Italy – Option for direct connection of a sawdust extraction system – Used briquetting machine – DTR documentation available – Very good condition Net price: 29900 PLN Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm Bedpfx Aiezrpn Ssxoww hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm Bjdpozrpqmofx Aixoww ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available Bodpfxjzrptne Aixsww

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Bwedpfx Aijzrpt Ioxjw Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: good (used), functionality: fully functional, Year of construction: 2003, Key parameters: Manufacturer: TRUMPF Maschinen Austria GmbH & Co.KG Model: TrumaBend V170 Year of manufacture: 2003 Bsdpfx Aie Acm E Hsxeww Pressing force: 1700 kN (170 tons) Max. bending length (working length): 4,080 mm Throat width (distance between side frames): 3,680 mm Max. stroke: 365 mm Stand clearance (cut-out): 410 mm Electrical and hydraulic parameters: Supply voltage: 3x400 V Frequency: 50 Hz Rated current: 46.3 A Total power consumption: 32.0 kVA Max. operating pressure: 340 bar Oil tank capacity: approx. 95 liters Hydraulic cylinder diameter: 190 mm Machine dimensions and weight: Total weight: approx. 18,000 kg External machine dimensions (W x D x H): approx. 5,000 x 2,210 x 3,100 mm. The machine is offered without tooling.

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 48 used wood chip and pellet boiler with Lambdatronic control. Suitable for larger properties, workshops and commercial buildings. Nominal heat output: 48 kW. Water capacity: 185 litres. Maximum operating pressure: 3 bar. Maximum temperature: 95 °C. Electrical connection: 400 V / 50 Hz, 12 A, 430 W. Bjdps Afbq Asfx Aixoww Net price: EUR 6,000. Exact scope of boiler, feeding equipment and accessories by agreement. Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility.

Condition: used, functionality: fully functional, Solid Wood Press for Sale! Manufacturer: Societa Italiana Macchine Idrauliche, Milan (Italy) • 5 hydraulic cylinders at the top • 4 hydraulic cylinders at the bottom • Working area: approx. 2.5 x 1.3 m • Mechanical/hydraulic control (no automation) • Good visual condition; well-maintained. FULLY FUNCTIONAL ✅ Bwjdpsz Azqtjfx Aixjw

Condition: used, Year of construction: 2006, operating hours: 22,000 h, functionality: fully functional, EQUIPMENT FOR TRANSPORT AND MANIPULATION OF RAW MATERIALS The equipment consists of:  Mercedes Actros container truck  Two containers with a volume of 10 to 20 m3 for sawdust  Liebherr bulk loader Equipment condition:  In good condition EQUIPMENT FOR THE PREPARATION OF RAW MATERIALS The equipment consists of:  Waste bin with movable floor - volume approx. 10 m3  Pneumatic transport systems with filter  Conveyor belts and augers  Sawdust dryer with biomass burner  Hammer mill for chopping wood chips with associated equipment  Control cabinets for each piece of equipment Capacity of the complete plant:  About 2 t/h of dried sawdust Equipment condition:  Completely overhauled BRIQUETTING PRESS WITH SAW AND PACKING UNIT Bwsdpfx Aioz I Tm Uoxsw Full capacity is 3,5T/h A complete briquetting line consisting of the following:  Briquetting press BP6000 CFN consisting of: o Silos for raw materials o Dosing screw o Oil and press head cooling system o Original press head and cooling line for briquettes with a diameter of 90 mm for hardwood o Manual and automatic control system o Current condition: the press has been 100% serviced and all vital parts of the press have been changed so that it is like new ones o Large quantity of spare parts in stock including spare axle and eccentric  Saw for cutting briquettes BRIDGE o Current condition: the equipment has been fully serviced  Automatic packaging machine for briquettes ROSMAN o Current condition: the equipment has been completely serviced and a new control cabinet has been made

Condition: excellent (used), Year of construction: 2004, Briquetting press. Bwsdoz I U Igspfx Aixjw

Condition: new, stroke: max. 500daylight: max. 1000motor: 15performance of pump: 65oil filling: 120messurements (LxWxH): 1300 x 3300 x 2950weight approx.: 6000pressure: 300Speed: vorlauf 8 / rücklauf 13,5Electro-hydraulic workshop press 300 t- Anti-rotation device for the cylinder piston - Pressure regulating valve - Speed control throttle valve - Emergency stop safety device - Noise level: 75 dB - Soft starter - Two-hand control panel - Linear measuring device for stroke adjustment with digital display - Pressure gauge - Digital pressure display - Emergency stop buttons on the control cabinet and on the two-hand control panel - Hydraulic tank including motor mounted at the lower side next to the frame - Hydraulic lines with check valves - Table manually height-adjustable and secured with 3 locking pins Bwsdpfez Hgb Asx Aixsw

Condition: like new (used), Heidelberg GTOZ-S52 offset printing machine The machine is ready to work, very good condition, purchased from small printing house. Technical data: Format: 36x52cm 2 printing units Weight: 3000kg Power supply: 400V Year of production: 1994 Baldwin alcohol dampening Control panel Bwjdpfx Aioz E A I Aexow Documentation and additional elements included.

Condition: excellent (used), Year of construction: 2008, Well-maintained used press brake from SafanDarley. Type EHP LS 230 43 37 Capacity: 4300 x 230 tons New Delem DA69T control system CNC-controlled Y1, Y2, X, R, Z1, and Z2 axes Bwsdoz S H Hdspfx Aixjw Hydraulic Wila New Standard top clamp Pneumatic Wila 13mm bottom clamp.

Condition: excellent (used), Year of construction: 2005, Shinohara 75 V H Year: 2005 Counter: 21 million 5 colors Maximum format: 520 x 750 mm Maximum plate format: 745 x 605 mm Thickness: 0.04–0.60 mm Maximum speed: 16,000 sheets/hour Double impression cylinder CIP 3 IR Powder sprayer Alcohol-based dampening system Baldwin cooling and circulation system High-pile delivery Remote ink fountain control Semi-automatic plate changing (Autoplate) Bwodpj Adzguofx Aixew Automatic washing of rollers and rubber blankets

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, operating hours: 300 h, machine/vehicle number: C15_20250015, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, pressing force: 44 t, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Bedps Ad Acdofx Aixjww Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, operating hours: 300 h, machine/vehicle number: C15_20250016, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, pressing force: 44 t, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Bwsdpfx Aio Ad Ackexow Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Closing force: 635 kN Operating pressure: 206 bar Piston diameter: 200 mm Stroke: 140 mm Daylight height: 150/180 mm Heating plate dimensions: 250 x 300 mm Bwjdpfs Ad Izxjx Aixjw Max. weight of the heating plates: 70 kg Oil tank: 100 l Rated power: 19.66 kW Heating power: 9.6 kW Vacuum motor power: 2.6 kW Light barrier, distance to the tool area: 270 mm Stroke of the vacuum cover: 140 mm Dimensions: 2,650 x 2,100 x 2,100 mm The vulcanizing press from the manufacturer PAN STONE, type S-V-65-2RT-PCD, was used by a renowned German company in the sealing technology and electromobility sector. This company is known for its high quality and innovation in sealing production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its very good condition. This press offers you the opportunity to invest in a proven technology that has been used by a leading company in Germany.

Condition: used, Year of construction: 1981, pressure 030 t throat 250 mm stroke 100 mm table-size 500 x 400 mm max. distance table - ram 320 mm ram surface 350 x 220 mm hole in the table 130 x 100 mm total power requirement 5,5 kW weight of the machine ca. 2 t dimensions of the machine ca. 1,8 x 1,6 x 2,5 m Bedpfxo Ad Rlme Aixoww Fabricated construction with light guard and two hand switch.