Used Pelmeni Machine for sale (91,586)

Year of construction: 2010, condition: good (used), functionality: fully functional, The Continuously Advancing Mandrel Filament Winding Process. The composite Laminate is a combination of Glass-fibre, Unsaturated Polyester Resin & Silica. The Continuously Advancing Mandrel Filament Winding Machine is a state-of-art- technology. It has a Computer Aided Design and Manufacturing Control facility with a built-in curing system. This ensures the optimum production of GRP Pipes of consistent strength and quality Fodpjr Dtafjfx Aabogh

Condition: reconditioned (used), Year of construction: 1924, functionality: limited functionality, conveyor belt length: 1,00,000 mm, conveyor belt width: 1,000 mm, conveyor belt speed: 1,00,00,000 mm/s, total length: 1,00,00,000 mm, total width: 1,00,00,00,000 mm, total height: 5,00,000 mm, overall weight: 1,000 kg, discharge height: 10,00,000 mm, inner radius: 5,000 mm, outer radius: 5,000 mm, power: 10 kW (13.60 HP), type of input current: AC, input voltage: 380 V, input frequency: 60 Hz, input current: 300 A, cutting range angle steel at 90° (X-axis): 200 mm, Microwave scanning Fsdpexdu R Nofx Aabjgh

Condition: new, power: 110 kW (149.56 HP), Year of construction: 2025, Bauxite Crusher: Bauxite is an aluminum ore, and crushers or mills are used to break down the bauxite into smaller pieces for further processing. Jaw crushers, impact crushers, or cone crushers may be used for this purpose. Granite Crusher: Granite is a hard and durable natural stone. Crushers used for granite crushing typically include jaw crushers, impact crushers, and cone crushers. These crushers can handle the varying hardness of granite and produce different sizes of crushed products. Fedpfx Ajq Nx Apjabsgh Bentonite Crusher: Bentonite is a type of clay with excellent water-absorbing and plasticity properties. Crushers such as jaw crushers or cone crushers are used to break down the bentonite into a manageable size for further processing. Barite Crusher: Barite, also known as baryte, is a mineral consisting of barium sulfate. Crushers like jaw crushers and cone crushers are commonly used in the crushing process of barite. Impact crushers may also be used for shaping and processing finer particles. For each of these minerals, the selection of the appropriate crusher depends on factors such as the hardness of the material, the required final product size, and the specific characteristics of the deposit. It's also important to consider whether a primary crusher, secondary crusher, or even tertiary crusher is needed in the processing flow. Additionally, for certain applications, grinding mills may be employed after the initial crushing stage to further reduce the size of the particles. Grinding mills suitable for these minerals might include ball mills, Raymond mills, or vertical roller mills, depending on the specific requirements of the process. Remember that the choice of crushers and mills is often part of a larger mineral processing plant design, and the selection process should take into account the overall production requirements, mineral characteristics, and economic considerations.

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine -The TFON Leveltech® is a robust and precise leveling machine designed to handle a wide range of material thicknesses with efficiency and ease. Engineered for reliability and performance, it ensures flat, smooth surfaces on metal sheets and strips to meet stringent quality standards. Key Specifications: -Material Thickness: 1 mm – 30 mm -Maximum Material Width: 1,600 mm -Minimum Material Length: 145 mm -Quick Change System for Straightening Rollers: Standard -Flattening Gap Adjustment: Servo Hydraulic with PLC Control. Fgodpfx Aaskyrphobjh -Machine Dimensions (L × W × H): 5,465 × 6,735 × 2,300 mm. -Total Weight: 40.000 kg

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm Fodpfxexdmgve Aabjgh CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, 3 Station Extruder Machine 1100 M2 Coex Unit 2 stations are operating Corona unit Non-stop big size winder-unwinder 2 station coex, one station mono extruder Fedpfxoxl Ucbo Aabjgh

Condition: good (used), OMRON CPM1A control, 4 stations. Target machine for assembling and compressing door glass modules. Fgsdpfx Aefruvcjabsh Price is a net target price, a matter of final price agreement Purchase, acquisition, asset management of industrial equipment and machinery. Wide range of used machinery, industrial equipment

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Fgedpfxsxligue Aabsh Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, functionality: fully functional, Year of construction: 2025, The VSI (Vertical Shaft Impactor) sand making machine is a type of crusher designed to accelerate the crushing of aggregate and produce cubical-shaped sand. It is widely used in the field of construction, mining, and other similar industries. Here are key features and information about VSI sand making machines: 1. Working Principle: - The VSI sand making machine operates on the principle of stone impacting stone or stone impacting iron. Material is fed into the center of the rotor, which accelerates to high speed to throw the material outward against a wear-resistant lining. 2. Rotor and Crushing Chamber: - The rotor is a crucial part of the VSI machine and is often designed with multiple pockets to facilitate material throwing and crushing. - The crushing chamber is lined with wear-resistant materials to endure the impact and abrasion during the crushing process. 3. Feedstock Control: - The feedstock (material to be crushed) can be controlled using a variable speed control system, allowing for adjustments to achieve the desired particle size. 4. Material Types: - VSI machines are suitable for processing various materials, including hard and abrasive materials such as rocks, ores, and minerals. Fgodpjq Nd U Hofx Aaboh 5. Cubical Shaping: - One of the significant advantages of VSI machines is their ability to produce cubical-shaped end products, which is desirable for high-quality concrete and asphalt production. 6. Adjustable Discharge: - The machine usually has an adjustable discharge opening, allowing for customization of the final product size. 7. Sand Production: - VSI sand making machines are primarily used to produce manufactured sand (M-sand) and crushed sand, which are essential components in the construction industry. 8. Maintenance: - Regular maintenance is required to ensure optimal performance and extend the machine's lifespan. This includes checking wear parts, lubrication, and addressing any issues promptly. 9. Variations: - Different manufacturers may offer variations of VSI machines with unique features or specifications. Common variations include open rotor and closed rotor designs. 10. Environmental Considerations: - VSI sand making machines are generally considered environmentally friendly as they produce less dust and noise compared to traditional crushers. 11. Manufacturers: - Well-known manufacturers produce VSI sand making machines, and it's crucial to choose a reputable supplier with a track record of providing reliable equipment. When considering a VSI sand making machine, factors such as feed size, capacity, and the desired end product specifications should be taken into account. Additionally, check the reputation of the manufacturer, and consider customer reviews and feedback regarding the specific model you are interested in.

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series -Model: L-9060 -Material Thickness: 1.0 mm – 30.0 mm -Maximum Material Width: 600 mm -Minimum Material Length: 145 mm. -Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard. Machine Weight: 26.000 kg. Machine Dimensions (L × W × H): 4,400 × 7,185 × 2,260 mm Model: L-9011 Material Thickness: 1.0 mm – 30.0 mm. Maximum Material Width: 1,100 mm. Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 31.000 kg Machine Dimensions (L × W × H): 4,600 × 7,185 × 2,260 mm Model: L-9013 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,300 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 35,000 kg Machine Dimensions (L × W × H): 5,000 × 7,185 × 2,260 mm Model: L-9016 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,500 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Weight: 40.000 kg Machine Dimensions (L × W × H): 5,200 × 7,185 × 2,260 mm Model: L-9020 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 2,000 mm Fgjdshwb U Tjpfx Aabsh Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Dimensions (L × W × H): 5,700 × 7,185 × 2,260 mm.

Condition: new, New, never used pellet making machine for sale! It can be ordered with a 6 mm or 8 mm sticker (1 piece optionally comes with the machine). Pellet production capacity up to 400-450 kg/hour depending on the raw material. Pellet diameter:3mm, 4mm, 5mm, 6 mm or 8 mm (depending on the chosen sticker). 3mm, 4mm, 5mm, 6mm sticker with roller as a set for the machine for 2000 euros. Sticker diameter: 300 mm. Adjustable pellet length: 10-30 mm. Engine power: 22 kW. Dimensions: 1400 mm x 1000 mm x 1200 mm. Weight: 750 kg. Raw material moisture: 10-12-14%. The moisture content affects the quality of the pellets. Dph3O7 Raw material size: Saw dust: 1-3 mm, straw: 3-6 mm. Fgodpfxsxmhx Ej Aabeh The density of the granules is no more than 1250/m3. It is located locally in Budapest (EU), Hungary.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, warranty duration: 6 months, The equipment has been checked by an authorized service center and is ready for operation. We provide a 6-month warranty. The CEA CONVEX 405 Pulse Premium is a high-quality MIG/MAG welding power source equipped with advanced pulse and double-pulse technology. Designed for professional and industrial applications, this Italian-made welder ensures excellent weld quality, easy setup with synergic programs, and maximum versatility. The unit is used but fully tested and in good working condition, ready for immediate operation. ⚙️ Technical Specifications Model: CONVEX 405 Pulse Premium Welding current range: 20 – 400 A Duty cycle (40 °C): 400 A {eta} 60% / 320 A {eta} 100% Power supply: 3~ 400 V, 50/60 Hz Welding processes: MIG/MAG, Pulse, Double Pulse, MMA, TIG Lift Control panel: synergic with memory programs and digital display Wire diameters: 0.8 – 1.6 mm (steel, stainless steel, aluminium) Cooling system: air or optional water cooling (depending on configuration) Weight: approx. 120–140 kg Fodjxl Drljpfx Aabegh ✅ Key Features Pulse & Double Pulse modes – ideal for aluminium and stainless steel. Synergic programs – quick and precise parameter adjustment. Supports multiple processes: MIG/MAG, MMA, TIG Lift. Stable arc and excellent weld appearance even on thin materials. CEA – Italian technology renowned for quality and reliability. Used but checked and ready for work.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm Fsdpfxowk Rlxo Aabogh weight: 240kg

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Fgjdjxlfwpepfx Aabjh Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. Fgedpoq N Ud Isfx Aabsh - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: new, Year of construction: 2025, *TFON Leveltech® Leveling Machine Series -Models: M-5560, M-5511, M-5513, M-5516 Fgsdohwb Uwepfx Aabjh -Engineered for precise leveling of materials with a thickness range from 1.0 mm to 15.0 mm, these models offer flexibility in material width and advanced control features for optimal performance -Material Thickness: 1.0 mm – 15.0 mm -Maximum Material Width: M-5560: 600 mm M-5511: 1.100 mm. M-5513: 1,300 mm. M-5516: 1,500 mm. Minimum Material Length: 110 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Machine Weight: M-5560: 12.000 kg M-5511: 15.000 kg M-5513: 18,000 kg M-5516: 19.000 kg Machine Dimensions (L × W × H): M-5560: 2,800 × 2,905 × 1,950 mm M-5511: 3,300 × 2,905 × 1,950 mm M-5513: 3,500 × 2,905 × 1,950 mm M-5516: 3,700 × 2,905 × 1,950 mm

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. Fedpfxexghngs Aabegh When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: used, Punching machine Bograma Description: Fgedpfx Asxlr Nreabsh - Standard equipped

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Fgedsxiv Ugspfx Aabsh Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: new, Year of construction: 2025, Gravel and aggregate production equipment is used to crush, screen, and process stones, rocks, and other materials for the construction industry. This equipment is essential in producing various types of aggregates, including crushed stone, gravel, sand, and recycled concrete, which are used in the construction of roads, buildings, bridges, and other infrastructure projects. Here are some common types of equipment used in gravel and aggregate production: 1. Jaw Crusher: - Jaw crushers are primary crushers used to break down large rocks into smaller, more manageable pieces. They are essential for the initial stage of aggregate production. 2. Impact Crusher: - Impact crushers are used to crush rocks and stones with the help of impact force. They are suitable for shaping and producing fine aggregates. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They produce well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They are suitable for processing materials with high abrasiveness. 5. Screens: - Vibrating screens are used to separate different sizes of aggregates. They classify the material based on particle size and ensure that the final products meet specified gradation requirements. 6. Scalping Screens: - Scalping screens are used to remove oversized materials before they reach the primary crusher. This helps to optimize the crushing process and prevent damage to the equipment. Fgodoq Nxz Depfx Aaboh 7. Washing Equipment: - Washing equipment, such as sand screws or log washers, is used to remove impurities and fine particles from aggregates. This is particularly important for producing high-quality concrete sand. 8. Conveyors: - Conveyors are used to transport materials between different stages of the crushing and screening process. They play a crucial role in enhancing efficiency in material handling. 9. Stackers and Reclaimers: - Stackers are used to create stockpiles of processed aggregates, while reclaimers are used to retrieve the material from the stockpile. Both are essential for efficient material storage and handling. 10. Crushing Plants: - Complete crushing plants include various types of crushers, screens, and conveyors integrated into a single system. These plants are designed to handle large volumes of material efficiently.

Condition: new, Year of construction: 2025, -TFON Leveltech® XS-3520 Leveling Machine -The TFON Leveltech® XS-3520 is a compact and efficient leveling solution designed for thin materials and smaller widths. Equipped with advanced electromechanical controls and user-friendly touchscreen operation, it delivers precision leveling with reliable overload protection for enhanced safety Fgedpfxjityvfo Aabjh -Key Specifications: Material Thickness: 0.3 mm – 5.0 mm Maximum Material Width: 200 mm Minimum Material Length: 70 mm Flattening Gap Adjustment: Electromechanical / PLC Controlled Overload Protection: Standard Control Interface: Touchscreen HMI Machine Weight: 2,000 kg Machine Dimensions(L × W × H): 2,225 × 1,595 × 1,850 mm

Condition: new, Year of construction: 2025, -Tfon Leveltech® S-3513 Leveling Machine -The Tfon Leveltech® S-3513 is a precision leveling machine optimized for ultra-thin materials, combining advanced electromechanical controls with easy operation for consistent, high-quality flattening results. -Key Specifications: Material Thickness: 0 – 0.3 mm Fgodpfx Aaekyrzloboh -Maximum Material Width: 1.300 mm Minimum Material Length: 70 mm Quick Change System for Straightening Rollers: Standard. Flattening Gap Adjustment: Electromechanical / PC Controlled Machine Dimensions (L × W × H): 2,685 × 1,585 × 1,820 mm. Total Weight: 5.000 kg.

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series Fgsdpfxehwb Ute Aabsh Models: S-3560, S-3511, S-3513, S-3516 -Designed for precision leveling of thin materials, these machines feature advanced electromechanical controls and user-friendly touchscreen interfaces for efficient operation -Material Thickness: 0.3 mm – 5.0 mm Maximum Material Width -S-3560: 600 mm -S-3511: 1.100 mm S-3513: 1,300 mm S-3516: (width not specified) Minimum Material Length: 70 mm. Flattening Gap Adjustment: Electromechanical / PLC Controlled. Overload Protection: Standard. Control Screen: Touchscreen Machine Weight: S-3560: 5.000 kg S-3511: 10.000 kg. S-3513: 14.000 kg. Machine Dimensions (L × W × H): S-3560: 1,985 × 1,585 × 1,820 mm. S-3511: 2,485 × 1,585 × 1,820 mm. S-3513: 2,695 × 1,585 × 1,820 mm

Condition: new, Year of construction: 2025, -Tfon Leveltech® TF M-5516 Leveling Machine Engineered for precision leveling, the TF M-5516 efficiently handles material thicknesses from 1 to 15 mm with advanced control features for optimal performance and ease of use. -Key Specifications -Material Thickness: 1 – 15 mm -Maximum Material Width: 1,600 mm Minimum Material Length: 110 mm. Quick Change System for Straightening Rollers: Standard Flattening Gap Adjustment: Servo Hydraulic / PC Controlled Fsdekyrqfopfx Aabogh Overload Protection: Standard Control Screen: Touchscreen Machine Size (L × W × H): 3,500 × 2,905 × 1,950 mm Total Weight: 19.000 kg.

Condition: new, Year of construction: 2025, -Tfon Bevel Wizard® Linear -Precision Beveling for Linear & Non-Linear Applications -The TFON Bevel Wizard® Linear is a high-performance beveling solution designed to deliver exceptional accuracy on both straight and contoured sheet edges. Engineered with flexibility at its core, it features an advanced Trace Tracking System that automatically adjusts to variations in material thickness and geometry—ensuring precise and consistent edge processing even for complex parts. -Key Features 🔹 Advanced Trace Tracking System: Intelligently detects and adapts to diverse edge shapes and contours in real time. 🔹 Wide Beveling Range: Adjustable bevel angles from -30° to +80°, ideal for a broad range of applications. - Optimized for Large Workpieces Capable of processing materials up to 12,000 mm in length and 100 mm in thickness. - Industrial-Grade Durability: Built to last with a solid 10,000 kg frame for long-term reliability. 🔹 Superior Surface Finish: Delivers a high-quality finish with a consistent Emery Band Rotation Speed of 30 m/min and a Ø135 mm contact wheel. -Technical Specifications: Beveling Angle Range: -30° to +80° -Material Thickness: 4 – 100 mm -Minimum Material Width: 250 mm Minimum Material Length: 250 mm Maximum Material Length: 12,000 mm Part Feed Speed: 1.5 – 5 m/min Part Completion Speed: 3 meters/day Maximum Part Indentation: Ø400 mm Emery Band Rotation Speed: 30 m/min Fgjdpfx Aasrt Tpnoboh Contact Wheel Diameter: Ø135 mm Emery Band Drum Diameter: Ø400 mm Machine Weight: 10,000 kg Engineered for precision. Built for performance. Designed for industrial excellence Tfon Bevel Wizard® Linear — Where Accuracy Meets Efficiency.