Used Pharma for sale (1,316)

Year of construction: 2022, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. The machine was previously used as a demo and rental unit. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. Materials and surfaces In contact with product: 316 L stainless steel. (1.4404) Ra ᐸ1.2 μm not in contact with product: stainless steel 304 (1.4301) Ra ᐸ1,2μm Drives Three-phase current geared motors Technical data rolls Nominal power (kW): 4,0 Speed (rpm) 3 - 30 voltage: 400 V, 50 Hz Protection class: IP 55 Compacting rollers The rollers for the PHARMAPAKTOR are made of hardened stainless steel. Rollers, roller bearings and bearing seals form a complete unit and are delivered fully assembled. It is therefore not necessary to dismantle the bearings to change the rolls. Roller profile: At your choice roller diameter: 200 mm roller width: 50 mm roller gap: 2.5 mm Hnjdpfxjfhmmxj Aabju

Condition: used, Used Zetterstrom 912 litre capacity 316L stainless steel vertical reactor. Unit has welded dished top and bottom heads. Internal rated 6 bar design pressure at -35 to 180 deg.c. External stainless steel jacket rated 6 bar/full vacuum design pressure at 180 deg.c. Unit has top entry 3-tier stainless steel agitator direct diven by 3kW 220/380 volt 3/50 1440 rpm motor via Lightnin model LS400 gearbox. Also includes (3) baffles. Unit is mounted on side supports. Specifications: Capacity: 241 gal Material of construction: Stainless Steel Type Of Heads: Welded Dished Top and Bottom Internal Pressure: 6 PSI Jacket Pressure: 87 PSI Internal Temperature: 180°F Hnedpfx Aajw T N Uvobsu Type of stainless: 316L Legs/Lugs: Side Supports

Year of construction: 2021, condition: good (used), functionality: fully functional, Industrial Ultrasonic Machine CONPROFE – Generator + Production Workstation For sale: a professional ultrasonic welding and cutting machine, equipped with a CONPROFE UW20-1A-CF(V2.0E) ultrasonic generator. This unit is designed for automated production lines—ideal for processing materials such as plastics, films, technical textiles, nonwovens, or medical components. Automatic Tube Filler / Tube Sealing Machine – Industrial Equipment Technical specifications of the generator (Conprofe): • Model: UW20-1A-CF(V2.0E) Hnedoxlnbdspfx Aabsu • Production date: 2021-03-09 • Power supply: 230 V ±10% (AC 50 Hz) • Max. output power: 1500 W • Operating frequency: 20 kHz ±1 • Generator dimensions: 310 × 288 × 143 mm • Tube filling machine dimensions: 180 cm x 115 cm x 162 cm Functions and applications: • Automatic filling of tubes with product (cream, gel, paste, mixture) • Tube end sealing (methods: hot air, ultrasonic, or induction sealing, depending on the model) • Trimming excess seal material Machine condition: • Generator production year: 2021 • Complete device, good visual condition, ready for integration with a production line. • Manufacturer: Conprofe Technology Group Co., Ltd. (China) Advantages and requirements: • Precise dosing – typical error < ±1% by volume • Quick format changeover for different tube sizes • Construction tailored for cosmetic/pharmaceutical industries • Required power supply – electrical, typically 230 V or dedicated

Condition: used, Year of construction: 1998, Tank pressure: 2.5 bar Manufacturer: 3C France Year : 1998 Type : Process skid with 1 reactor / vacuum mixer and 1 melting tank Previous application: pharmaceutical (coating solution)   A – Reactor / Main vessel Total volume: 1142 litres Pressure: – 1 / 2.4 bars Temperature: 144 °C Jacketed volume: 98 litres Pressure: 2.5 bars Temperature: 142°C Mixel agitation: 2 deflocculators Ø260 mm Motor: 11 KW (1500 rpm) Sample intake Washing ball Level probe Hsdpfx Aaewmw R Tobjnu Inspection hatch, porthole, light   B – Melter Total volume: 152 litres Pressure: – 1 / 2.1 bars Temperature: 114°C Jacketed volume: 24 litres Pressure: 2.5 bars Temperature: 148 °C Agitation: 1 tank bottom deflocculator Ø125 mm Motor: 2.2 KW (3000 rpm) Washing ball Level probe Sample socket Inspection hatch, porthole, light   Additional accessories : – Dosing pumps – Circulation pump – Flow meters – Controllers – Electrical cabinet with PLC and speed drives   Access footbridge Batch of spare parts available (gaskets, seals, etc.) Full documentation in digital format

Condition: ready for operation (used), Year of construction: 1992, A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible. Hsdpfoxn Aagox Aabenu

Condition: excellent (used), functionality: fully functional, overall weight: 36,000 kg, empty load weight: 8,776 kg, maximum load weight: 27,224 kg, axle configuration: 3 axles, loading space length: 13,325 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, first registration: 03/2024, next inspection (TÜV): 04/2026, suspension: full air, color: white, tire size: 385/65 R 22,5, Year of construction: 2023, Equipment: ABS, cooling unit, our vehicle number #30615 3x BPW axles Tire size: 385/65 R 22.5 Permissible total weight: 36,000 kg Payload: 27,224 kg Unladen weight: 8,776 kg Body dimensions inside (L): L: 13,325 mm W: 2,490 mm H: 2,650 mm Volume: 88 m³ Double deck Refrigeration unit: TK Advancer A-500 with 1,269 hours Rear doors Disc brakes Pharma specification Flower width Diesel/electric cooling Temp. recorder TouchLog Premium Aluminum barley-corn floor Wabco Smart Board Wabco TrailGuard Lift axle 1 and 3 Jost landing legs 1 row of load securing rails Hnsdpfxsxn Nchs Aabju Simple rotary bars on the outside Raise/lower function ABS/EBS 2x tool box Work lights Axle load indicator Financing available on request!!!

Year of construction: 2023, condition: new, functionality: fully functional, Rental system Hosokawa Alpine AS 100 Aeroplex The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide with each other and break reducing their size. Once they are fine enough they are attracted to the central outlet, acting as a sort of static classifier but without a precise sharp top cut in comparison to the AFG (which is fitted with a rotating classifier wheel). Once the comminuted particles make it through, they exit the system either to a cyclone or directly to an air filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the gas pressure on the grinding nozzles or the feed injector, air volume, feeding rate, etc. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Hodpfx Aasq A T Ilsbsnu Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Technical details Stainless steel construction, pharma design Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) Batch operation, for a few grams normally (product dependent) Scope of supply Complete small system comprising dosing channel, spiral jet mill with manual pressure control and filter bag

Condition: used, Used LODIGE mixer Type M5R - Double jacket - Total volume : 5 litre - Useful capacity : 4 litre - Motor : 0.75 kw – Hp 1 – 220/380 volts - Variable speed Specifications: Bowl Volume: 4 gal Motor Power: 1 hp Hedpfx Aaoxlgk Djbjnu Jacket (Y/N): Y

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The induction sealer is used for sealing PET and PP bottles with an aluminum protective lid. It is particularly recommended for the chemical, pharmaceutical, and cosmetics industries, as well as wherever it is necessary to secure volatile or corrosive substances from uncontrolled leakage. Main features: • Suitable for use with plastic or glass containers. • Very easy to operate • Handheld device for small production runs • Portable and does not require a dedicated workspace • Packaging speed: approx. 20-40 pcs/min (depending on the operator and product being sealed) • Maximum container diameter: 60-130 mm Hnedpfx Aaoxlm Shebeu • Maximum distance between the inductor and container: 3 mm • Activated by a switch located on top of the inductor Control panel: • On/Off switch • Fuse • Digital display indicating current • Digital display indicating time • Overheat protection – the device automatically shuts down until it cools down

Condition: used, Year of construction: 2003, total length: 1,500 mm, total height: 1,400 mm, Applicable material: Food Year : 2003 Type: hot or cold product filling line for pots and bottles Application : Suitable for viscous products such as creams in the cosmetics / pharmaceutical or other industries   Type: Automatic linear filler Manufacturer: Tirelli Model : CHICO 2P Hnsdpfovlzq Nsx Aabju Year : 2003 Number of heads : 4 units Volumetric filling technology with 2 metering pistons Jacketed 25 L hopper + piping Temperature controller Pneumatic bottle-lock centring device PLC controls and configuration Linear conveyor with pallet chain SISE 95E6E 13 DC60 temperature controller (3.5 KW / 90°C / Water) – Year 2014   Type : Automatic capping machine with star wheel Type of cap: screw cap Manufacturer: Tirelli Model : RO Year : 2003 Automatic cap feeder : vibrating bowl + giraffe conveyor Presence / jamming / dispensing sensors Pick and place   Type: Automatic jar / bottle unscrambler Manufacturer: Romaco Bosspack Model: MS150 Year : 2003 Output : up to 150 jars / min Product dimensions : Diameter: 30 mm min / 100 mm max Height : 50 mm min / 200 mm max Width: 30 mm min / 100 mm max Length: 30 mm min / 100 mm max Machine dimensions : Length: 150 cm Depth: 340 cm Height: 140 cm

Condition: not inspected (used), Volume: Approx. 6000 L Type: Standing on three feet Tank diameter: 2250mm heatable/coolable double jacket Enamelled tank Hjdpfxehg Niqj Aabjnu

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Used heat-sealing machine for medical blister, make: MEDIPACKER, model: TS 3535, Serial number: 635-231; MFG: September 2018, dimensions: Width 470 mm X Depth with guide bars 710 mm X Height 660 mm, net weight 112 kg without tools, seal surface 350 x 350 mm Max., depth of Blister 105 mm; The used heat-sealing machine is sold with the mould (please check the pictures); The filled blister packs are placed on the support plate. The die-cut lid is placed on the blister pack; positioning is using pins. The carriage is pushed to its rearmost stop. The sealing cycle is initiated automatically. After the sealing cycle, the carriage is pulled back again. With its compact and durable design, this table model has been specially developed for the medical industry and use in clean room areas. The three process parameters— Time, Pressure, and Temperature—are regulated to the tightest tolerances, resulting in a high-quality package. Hjdpfxjvubaps Aabjnu Rust-free INOX construction with aluminium parts anodized. The sealing temperature is digitally programmable up to max. 190 °C feedback control accuracy at 130 °C = ± 1.0 °C measured at the hotplate PID feedback control system. The sealing force is programmable via touch screen from 6 kN to 36 kN, adjustable in 1 kN steps, repetition accuracy within 0.5 kN. The sealing time is programmable from approximately 1.0 to 9.9 seconds. The program is adjustable by 0.1 seconds each. The repetition accuracy is better than 0.15s. Output approx. 12 Cycles/Minute, without placing and removal of trays compressed air connection 0,6 Mpa/6 bar, tube outside 12 mm, tube length 3 m. The compressed air must be supplied filtered and dry. The consumption of compressed air per cycle at 16,5 NL to 0,5 MPa; The electrical connection is 230 VPNE 50/60 Hz, max. 2300 VA; 3 x 400 V, 50 Hz, max. 4100 VA Sealing lid from a film roll For Romanian companies, finance leasing or credit in instalments is possible, with a minimum of 50% down payment. Price 7,500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nitrogen of different products, to help in their grinding process (plastics for instance) or maintain their properties (food for instance). The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Hnjdjq Rv Hhopfx Aabeu Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2021, condition: excellent (used), functionality: fully functional, For sale: Professional vertical bucket conveyor designed for automatic transport of bulk products, granulates, and small components. The machine is made of stainless steel and is suitable for operation in industrial lines (food, pharmaceutical, and technical sectors). Specifications and features: • Construction: stainless steel (easy to keep clean) • Electric drive with gear motor (mounted at the top) • Bucket belt with blue containers (material approved for food contact) • Lower hopper for raw material feed • Upper discharge chute for further transport/packaging machine • Self-supporting frame construction Hedpfx Asxlhbqoabjnu • Can be integrated into a production line Application examples: • Transport of food products (nuts, rice, pasta, candies, frozen food, etc.) • Transport of industrial components (screws, caps, granulates, plastics) • Integration with packaging machines and automatic weighing systems

Year of construction: 2004, condition: used, Manufacturer: Gerteis Model: GMP-Polygran Macro Pactor 250/100/3 Year: 2004 Type: Roller compactor, granulation unit for the pharmaceutical industry. Feed screw Stamping screw Compaction zone with pressure rollers Granulation zone with star rotor and screen Force: 1 – 20 KN/cm Gap width: 1.0 – 6.0 mm Hjdpfx Aasvly Iysbonu Pressure roller speed: 1 – 30 rpm Roller diameter: 250 mm Roller width: 100 mm Capacity: 60 – 400 Kg/H (normal value: 200 Kg/h) Equipment dismantled and stored. Complete electrical and technical technical file + program backup available. Electrical, safety control cabinet not available . These items may be the subject of a separate quote.

Condition: not inspected (used), Volume: Approx. 6000 L Hnodpfx Ashg Nk Djabsu Type: Standing on three feet Tank diameter: 2250mm heatable/coolable double jacket Enamelled tank

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: 31495, SOXHLET EXTRACTION UNIT -SEMI-AUTOMATIC RAYPA SX-6 System for extracting fats or solvents soluble in a solvent using methods Soxhlet and Randall. Compatible with a wide range of samples. Extraction system with solvents, according to Randall method for fat and soluble materials determination, in food, feeds, soils, detergents, polymers, paper pulp, fibres, rubbers, textiles, petrochemical products, pharmaceutical products, etc. Furniture in stainless steel, epoxy resin painted. Heating by an electric plate with an armoured heater to assure homogeneous distribution of heat. Control of temperature by a microprocessor with P.I.D. action and probe Pt100 class A. Over-temperature safety control by independent thermocouple. Vitón® seal set. In accordance with standardized international methods: AOAC, ISO, AACC. Advantages Independent programming of “boiling” extraction time and “rinsing” extraction time. Specifications Working range of temperatures: room temperature +5 ºC to 220 ºC. Solvent volume: up to 50 ml. Hnodpfx Asfiulfsabou Sample max. volume: 25 ml. Solvent recovery: 60-70%. Reproducibility: ±1%. Extraction cartridge Ø ext 26 × 60 mm. “boiling” extraction time: 0-99 h. “rinsing” extraction time: 0-99 h. Extraction speed: 30-60 min. Electric protection IP65. NOTE: Components supplied with our equipment: 18 extraction vessels + magnetic adapter. 3 racks for extraction cartridges. 3 racks for extraction vessels. Aligning rack. Box containing 25 thimbles. Documents: Instruction manual for use and maintenance in Romanian and English. Year of manufacture 2007, never used • For the Romanian companies there is the possibility of selling in instalments. Price Euro 2.650+ VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2009, condition: refurbished (used), Fully refurbished Hosokawa Alpine AHM 132 used system by Alpine Originals. This used wet agitated ball mill Alpine 132 AHM has been used in recent years as an exhibition machine and demo machine for customer trials. The machine is in excellent condition and is sold with many accessories. Due to its size it´s perfect for lab scale production and R&D tests. Unit available for rental as well. Hsdpsg Uv Tfefx Aabsnu The Alpine AHM agitated ball mill is especially suitable for processing both in continuous close circuit and batch mode of good flowable suspensions where high end-product fineness even in nano range are required. The fine grinding takes place in a liquid with the aid of a bed of agitated milling beads. The mill is suitable for different products such as chemicals, minerals, pcc, dental ceramics, foodstuffs, metals, pigments and paints, laboratory, nano particles, abrasives, pharmaceutics for submicron and nano-scale milling. Technical details: grinding chamber volume: 5 l Drive power: 7.5 kW Construction materials: stainless steel, polyurethane, ceramic wear protection ATEX: internal zone 1, external zone 2/22 Throughput approx. 40 - 200 l/h Scope of supply: Hosokawa Alpine wet mill AHM 132, grinding tools and grinding media A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: used, Year of construction: 1989, Fluidized bed dryer by batch, in stainless steel and with spray granulation. Manufacturer: Glatt Model: WSG-C200 Year: 1989 Previous use: pharmaceutical Product trolley capacity: 700 liters. Product capacity: 200 – 280 Kg Filtration battery and air heating. Bag filtration Heat exchange: tubular Temperature control: multiple probes Spraying: yes Watson Marlow peristaltic pump Spray nozzle Frame and tower: 316 stainless steel Electrical cabinet Hodpevlzhzjfx Aabonu Sold with 2 trolleys and protective bags Trolley tipper: available Documentation: available in German Spare parts Valves available Fan not available. Hot water generator not available

Condition: not inspected (used), Volume: Approx. 5000 L Type: Standing on three feet Hnsdehg Nlpspfx Aabsu Tank diameter: 2100mm heatable/coolable double jacket

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: CN5ED08442, Nitech Pol Eko CLN 53 laboratory incubator, year 2007, serial number: CN5EC07031 Applications: - Incubation of samples for microbiological determinations; - Analysis of the thermal resistance of the samples subjected to higher temperatures; - Antibodies; - Bacterial tests; - Crystallization observations; - Cultivation of thermophilic microorganisms; - Pharmaceutical stability tests; - Food industry distorting tests. Specifications: - Working capacity: 56 kg; - Temperature range: + 5 ° C above ambient temperature ... + 100 ° C; - Acid-resistant steel interior; - Door with horizontal opening; - Self-diagnosis; - System for restoring the work schedule in case of power failure; - Alarm based on temperature sensor - Natural air convection; - Number of interior shelves: 2, with adjustable height. Dimensions [mm]: - Ext. Width: 590 - Ext height: 700 - Ext depth: 620 - Int width: 400 - Int height: 390 - Depth int: 360 - Weight [kg]: 50 - Voltage: 230V 50Hz - Power [W]: 450 Impeccable functional and aesthetic condition. Price 900 Euro + VAT, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /Subject to errors, changes and prior sale /Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch/Beszélünk magyarul/Nous parlons français/Vorbim romana. Hsdpjfiav Usfx Aabsnu

Year of construction: 2000, condition: refurbished (used), functionality: fully functional, Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the grinding chamber where the nozzles inject compressed gas at high pressure onto the fluidized bed full of feed material and the resulting jet projects the particles against each other breaking them thus reducing their side. The comminution takes place in the center of the chamber far from the mill housing, hence resulting in extreme low wear within the grinding chamber turning this mill optimal for abrasive materials or those that require very low contamination in the final product. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the grinding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier or cyclone-classifier. Thanks to the great required process air volume, very limited temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the compressed gas pressure, grinding nozzle diameter or its design and the classifier wheel speed, air volume, filling level and feeding rate, etc. Technical details Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert gas operation (N2) Hnedpfx Aajr Dcitebju Made of mild steel, with wear protection (ceramic and Vulkollan) Scope of supply Hosokawa Alpine AFG 140 system comprising: dosing, jet mill, filter, butterfly valve, blower, process gas distributor, controls and supporting structure. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 1987, condition: reconditioned (used), functionality: fully functional, Fully refurbished Hosokawa Alpine CW 250 used machine by Alpine Originals. The pin mill Hosokawa Alpine Contraplex CW fitted with two driven contrarotating discs. It is used to grind soft materials, even with high fat or humidity content. It allows also the processing of certain flexible materials or those that can´t lose their properties during comminution in cryogenic mode using liquid nitrogen (LN2) freezing them. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 40 to 500 micrometer (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this final product range thanks to its two contrarotating pin discs, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with pins impacts and projects the particles against the different pin rows reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding disc, the type of pins, air volume, feeding rate, etc. Technical details Cryogenic grinding machine (LN2) Construction material: stainless steel Non Pressure Shock Resistant (NPSR) Scope of supply Hosokawa Alpine 250 CW Contraplex pin mill with pin discs and motors A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Hodpfjrvh Hkjx Aabsnu Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 1985, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Hnjdpfx Aashx N N Ujbou Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used fine impact mill Hosokawa Alpine Contraplex CW 250 pin mill. The Contraplex pin mill is fitted with two contrarotating pin discs achieving high relative speeds, allowing it to reach finer end products than our traditional universal mill type UPZ. This grinder is suitable to comminute many different products for all kind of industries, like chemicals, food, pharma, etc. Material of construction: stainless steel, mainly AISI 316, Pharma finish Wide chamber design, suitable for cryogenic grinding (LN2) allowing it to process heat sensitive, greasy, oily, sticky, hygroscopic materials, etc. which tend to form deposits Non Pressure Shock Resistant (NPSR), non gas tight Without wear protection Scope: Hosokawa Alpine CW 250 with pin discs and motors

Year of construction: 1999, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine APC K 200-50 pharmapactor with Flake Crusher AFC 300. The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Specially built for pharma industry. Material of construction: - product contacting parts: stainless steel Hnedpfxoi E Hims Aabsu - none product contacting parts: stainless steel Non Pressure Shock Resistant (NPSR), non ATEX Scope: Hosokawa Alpine Pharmapaktor APC K200/50 with 4,0 kW motor, feeding screw with 1,1 kW motor + Flake Crusher AFC 300 with 0,75 kW motor