Used Pharma for sale (1,311)

Condition: ready for operation (used), Bathless Dissolution Test System with 6 Vessels. The DISTEK Evolution 6100 Bathless Dissolution Test System is a revolutionary piece of equipment that eliminates water bath issues with its patented bathless technology. It is designed to meet today's demanding standards for accurate temperature control and test reporting, maintaining much tighter tolerances for temperature and RPM than conventional water bath systems. The unit has been tested and comes with a 30-day warranty, with slight cosmetic blemishes from normal use. With six complete sets of vessels, lids, shafts, paddles, and heating jackets, the Evolution 6100 offers enhanced precision and functionality. It offers rapid media heating, precise individual vessel temperature control, and advanced method storage and sorting capabilities. Key Features Patented bathless technology for accurate temperature control 6 complete sets of vessels, lids, shafts, paddles, and heating jackets Rapid media heating and precise individual vessel temperature control Advanced method storage and sorting capabilities Specifications Dissolution Vessels: Six Standard/Up to Seven Vessels Volume: 500mL - 1000mL programmable Vessel Heating Rate: Approx. 1.5C per minute RPM Control Range: 25-300 RPM, digitally controlled, closed loop Resolution: 0.1 RPM Accuracy: 0.2 RPM Godswg Rrwspfx Aabouh Display: LED's, .75 (19mm) high Motor: High Torque, Permanent Magnet Vessel Temperature Control: Independently controlled two-zone heater jackets Display Resolution: 0.01 C Accuracy: 0.25 C Interface Ports: RS-232 (2), RS-485 (1), Parallel Printer (1) Construction Materials: Cast Aluminum, Stainless Steel, Acid resistant solid state heating elements, Engineered Plastics Electrical Power: 115V 15V 50/60Hz 15A or 230V 15V 50/60Hz 9A Weight Metric: 86.1826 kg Imperial: 190 lb Dimensions Metric: 27.94 cm x 53.34 cm x 116.84 cm Imperial: 11 in x 21 in x 46 in Harmonized Code 841989

Condition: used, Used Buhler horizontal hammer mill. - Carbon steel rotor has diameter approximately 980 mm. - Rotor is divided into 3 section. - Rotor has (8) shafts, each shaft is equipped with (10) swing hammers. - Rotor is driven by 75 kW, 380/660 V, 1480 rpm, 50 Hz electrical motor. Guedpfx Aexlhibeabjh - Includes number of spare screens and switchboard.

Condition: good (used), Container, granulate container, storage tank, lye tank -Container: stainless steel container, lye container with lid Godpexak Ntsfx Aabeuh -Capacity: approx. 1660 Ltr -Dimensions: 3770/940/H1540 mm -Weight: 603 kg

Condition: used, Year of construction: 2013, functionality: fully functional, Rubber solution mixing unit with compact agitator and inline mixer for free-flowing rubber-toluene mixtures or ther liquids. ATEX certified Version EX II 1/2G c IIB T3 Inline mixer with thermo-siphon system Type 450LS Silverson Mixing output (water): 25.000 l/h Motor speed: 3000 rpm Gusdpfxoxmilgs Aabsh Compact agitator Type ARW-2081 (EX) Motor speed: 129 rpm Agitator shift diameter: 30 mm Measurements Measurements (LxWxH): 1800 x 1000 x 1710 mm Weight approx.: 1320 kg

Condition: ready for operation (used), The Thermo Scientific Dionex ICS-Series VWD is a highly advanced variable wavelength detector designed to provide accurate and precise detection of analytes in complex samples. It is a vital component of the Dionex ICS-Series chromatography system and is used for a wide range of applications, including pharmaceutical research and development, environmental monitoring, food and beverage testing, and more. The detector is equipped with a state-of-the-art flow cell design that ensures excellent signal-to-noise ratios, providing exceptional sensitivity and selectivity for even the most challenging separations. The flow cell is also designed to minimize dispersion and band broadening, ensuring high resolution and accurate peak detection. The Thermo Scientific Dionex ICS-Series VWD Detector features a variable wavelength range of 190 to 900 nm, which enables it to detect a broad range of analytes. It also has high-speed scanning capabilities, enabling rapid data acquisition and analysis, making it ideal for high-throughput applications. Good working condition. Please check out our other listings as well. Gujdpfx Asxnm Rvoabsh

Condition: new, Year of construction: 2024, functionality: fully functional, New and unused gas scrubber made of PP for approx. 5000 m³ of gas per hour. Operation with water and additives such as sulfuric acid is possible. Gusdpsxg Epbofx Aabsh

Condition: ready for operation (used), Trolley Mounted Hammermill Gusdpfewg Rqtsx Aabeh

Condition: used, Used Nikro spol. s r.o. (Slovakia) 2013 total capacity polished stainless steel 316 L vertical reactor. Internal 1300 mm diameter x 1035 mm straight side height. Has bolted dished top and welded dished bottom heads. Internal rated 2 bar maximum pressure and 130°C maximum internal temperature. Stainless steel jacket rated 2 bar maximum pressure and 90°C maximum temperature. Jacket is insulated by black foam rubber and claded by stainless steel plate. 2-blade agitator driven through Nord gear box by 0.75, 50 Hz, 400 V, 1395 rpm electric motor. Has Anga mechanical seal on the shaft. Top head connections include (1) 200mm diameter manway. Central bottom discharge. Mounted on (4) lugs. Specifications: Capacity: 527 gal Gjdpfxjxlhhws Aabouh Diameter: 51.18" Straight Side: 41" Material of construction: Stainless steel Type Of Heads: bolted dished top and welded dished bottom Internal Pressure: 29 PSI Jacket Pressure: 29 PSI Internal Temperature: 130°F Type of stainless: 316 L Legs/Lugs: 4 Dimensions: 1300 mm diameter x 1035 mm straight side height

Condition: ready for operation (used), General Location Bremen Condition used Tank volume 17,300 liters Max. permissible operating temperature 100 °C Specific weight of medium 1.2 (to/m³) Type of construction upright Stand form Feet Number of feet 4 pieces Gedpfsinvcwox Aabouh Technical data / dimensions Diameter inside 2,900 mm Cylindrical height 1,800 mm Total height 5,100 mm Wall thickness bottoms 4 mm Wall thickness cylinder 8 mm Equipment Technical documents Drawing,TÜV papers Manhole / dome in the top bottom (DN 600), hand hole Type plate Outlet 50 mm Remark slight adhesions Remarks 1 tank (internal no. 7081-3) with a smaller dent as well as a cut-off connection in the top bottom

Year of construction: 2024, condition: new, functionality: fully functional, New and unused recooler with adiabatic water cooling Additional pictures available upon request Guedoxg Dlbepfx Aabjh

Condition: ready for operation (used), Used Glatt Laboratory Fluid Bed Dryer, Model TR2. 7-1/2" diameter x 8" deep Lexan bowl, temperature controllers, top mounted blower, driven by .37 KW (.50 HP), 3/60/110 Volt, 2440 RPM motor. Rated 20 - 80 degrees C (68 - 176 degrees F) Gusdowg Rrdjpfx Aabeh

Condition: used, Used SGL Carbon Technic Sas (France) model CKL7 diam.16 - 10 blocks, graphite (DIABON NS1) heat exchanger/cooler-condenser with surface area 102,6 sq. meters. Has 10 graphite blocks, each diameter 765 mm x 347 mm height. Construction material of shell P265GH (W.Nr. 1.0425). Process side rated full vacuum/3bar at 1 to 110 deg.C. Design pressure -1/3Bar at 1 to 110 deg.c. Service side rated 5 bar design pressure at 1 to 40 deg.C. Process side capacity 542 litre and service side capacity 648 litre. Product inlet diameter: 450 mm and 100 mm outlet. Dimensions: 1000 mm diameter x 4520 mm height. Mounted on (3) lugs. New 2010. Transport dimensions: 4700 mm lenght x 1 450mm width - 1700 hight. Transport weight: 5 600 kg, (only exchanger 4950 kg). Guodoxlhgmjpfx Aabsh Weight: Actual: Kg5600.0

Condition: ready for operation (used), General Manufacturer Schleifenbaum Weber Location Outdoor storage (dismantling in September 2023) Condition used Tank volume 60,000 liters Vacuum 0.2 bar Max. Overpressure 1.5 bar Max. permissible operating temperature 200 °C Upright design Standing shape Feet Number of feet 4 pieces Godpfx Aot Aw Rcoabjuh Heating/cooling jacket Heating/cooling available Volume double jacket 105.0 liters Max. permissible operating overpressure 6.0 bar Max. permissible operating temperature 250 °C Tempering underbody Half-pipe coil Insulation Insulation available Technical data / dimensions Internal diameter 3,000 mm Cylindrical height 9,000 mm Wall thickness underbody 10 mm

Condition: good (used), K-tron Soder double screw feeder. with COPERION KCM IP65 K-tron Controller. Bowl diameter: 220mm x 270mm. In good working order. It comes with two sets of screws. Type: T35 Gusdpfolc N T Rex Aabeh

Condition: used, Used Hosokawa model 35-MSC-44 nauta conical double screw mixer. - Working volume: 3125 litre. - Working pressure: Atmospheric. - Product contact parts: Stainless steel 1.4301. - Cone has dimensions (approx.): 2334 mm diameter x 3366 mm cone height / 4609 mm total height (bottom edge of discharge valve - drive). - Top semi-circular covers: 1x hinged cover with safety mesh, 1x bolted cover with man way and flange DN400 Gsdpjxlgi Tjfx Aabeuh - Non-supported screw agitators (double screw design): driven by 11 kW, 1500 rpm, 400 V electric motor, final rpms of screws 70 rpm - Arm: driven by 1.1 kW, 1500 rpm, 400 V electric motor, final rpms of arm 0.82 rpm - Lump breaker: driven by 5.5 rpm, 1500 rpm, 400 V - Includes: inspection doors at the bottom of cone (approx. 800 mm height x 500 mm wide at the top / 250 mm wide at the bottom), discharge valve. - Mounted: (3) lugs.

Condition: ready for operation (used), General Manufacturer Möschle Location Bremen Condition used Tank volume 2,700 liters Vacuum 0.50 bar Max. Max. overpressure 0.99 bar Max. permissible operating temperature 50 °C Vertical design Standing design Mobile frame Godpfx Ast Aw Dvjabouh Heating/cooling jacket Heating/cooling available Volume double jacket 90.0 liters Max. permissible operating overpressure 0.5 bar Max. permissible operating temperature 50 °C Temperature control cylinder Double jacket Insulation Insulation available Insulating jacket hermetically welded Insulating jacket material Stainless steel Technical data / dimensions Internal diameter 1,500 mm External diameter 1,600 mm

Condition: ready for operation (used), Year of construction: 2011, Powder feeding cabinet with suction hood and potentially a dust filter, twin screw powder feeder is installed under the cabinet with a level sensor. Gujdpow Dfv Ssfx Aabsh

Condition: used, Used Netzsch model 606.70 stainless steel dissolver. Mixing shaft with stainless steel toothed disc agitator diameter 550 mm driven by ABB electric motor 58 kW, 380 V, 1485 rpm, 50 Hz, rated EX-91.C.3460. Hydraulically lifted arm, total height in lower position approx. 2850 mm/total height in upper position approx. 4350 mm. Includes integrated lid (dia 1220 mm), can holding/fixing device, local control panel and electrical switchboard. Specifications: Guodpfx Aexlgi Hjaboh Power: 58 kW

Condition: good (used), Atlas automated chemical synthesis system Godpfx Ajtwdp Asabjuh

Condition: used, Używany poziomy młyn młotkowy w wykonaniu części kontaktowych ze stali kwasoodpornej, produkcji Pallmann (Niemcy) typ PHM 600-350. Młyn ma wewnętrzne wymiary komory mielenia D 600 mm x S 350 mm. Górny część komory mielenia jest unoszona ręcznie. Rozładunek dolny, przez sito. Górna pokrywa komory mielenia jest wyposażona w statyczny nóż/tarkę do rozcierania produktu. Rotor młyna ma średnicę 500 mm x szerokość 345 mm. Na rotorze są 24 rzędy młotków, każdy rząd mieści 4 młotki. W sumie młyn posiada 96 młotków. Rotor i młotki są wykonane ze stali nierdzewnej. Rotor jest napędzany przez przekładnie pasową silnikiem elektrycznym o mocy 75 kW, 2975 obr/min, 380/660 V, 50 Hz. Podawanie produktu boczne. Zasyp ma wymiary 350 mm x 265 mm. Produkt jest przenoszony do komory mielenia trzema ślimakami. Ślimaki są napędzane silnikiem elektrycznym o mocy 0,55 kW, 2800 obr/min, 220/380V, 50 Hz przez przekładnię z ręczną regulacją obrotów. Całość jest zamontowana na podeście ze stali węglowej. Młyn jest wyposażony w szafę elektryczną, osłonę pasków klinowych i zestaw sit (6 szt.). Gedpoxgfu Dsfx Aabouh

Condition: good (used), In good working condition. Complete. We have three in stock. Guodpfx Ajtnhwkeabsh

Condition: used, Broyeur à marteaux FORPLEX inox Type FL1 Gsdpfxexm T Ils Aabeuh Moteur : 5.5 kw – 7.5 cv – 3000 t/min – 220/380 volts triphasés Ecluse alvéolaire en sortie de broyeur

Condition: used, Used stainless steel GOAVEC cooking bowl 80 litres-Total volume : approx. 120 litres-Using capacity : approx. 80 litres-Vessel Ø 680 x 700 mm - Outlet by stainless steel root rotary pump-Agitator anchor with scraper : Hp 1- Rpm 7 to 33 - 3x 220 x 380 Volts-Agitator paddle : Hp 0.33 - Rpm 40 - 3x 220 x 400 Volts- Double jacket-With electric control panel-On mobile frame Guedsxm T Ifopfx Aabeh

Condition: used, Used stainless steel planetary mixer by Grieser (DE) model VPL 350. Mixer has two spiral agitators and one side wall scrapper. Agitators are belt driven by el motor 15 kW, 1460 rpm, 400 V, 50 Hz and planetary gearbox. Rising and lowering of agitators by hydraulic device. Mixer is equipped with 9 mobile stainless steel mixing pans. Each pan has internal diameter 695 mm x 500 mm depth, total volume 365 l, working about 350 l. Two mixing pans have bottom outlets with manually operated valves. There is also included mechanical rising and tilting device for discharging pans. Mixer has local control panel and el. cabinet. Technical documentation - general manual and el. schemes available in digital form. Machine currently dismantled. Last time used in food production. Specifications: Gujdpfx Aasxdw I Robsh Power: 15 kW

Condition: used, Used foaming mixer by Kinematica AG (CH) type MEGATRON FM 19-120/2 LR-P. Machine has working output in range from 40-200 l/h, depending on product. Maximal viscosity of product up to 10000 mPa*s. Foaming head is equipped with heating/cooling jacket and can work at pressure up to 23 bar and temperature up to 90C. Rotor works with adjustable rotation - in range from 375 up to 750 rpm. Main drive power consumption - 11 kW. Contact parts with product designed in stainless steel AISI 316L. Mixer is equipped with integrated lobe pump by Tri-Clover/Tri-Clamp, driven by el. motor with power 0.75 kW. Working pressure up to 23 bar. Maximal rotation of lobes - up to 370 rpm. Gase feeding system - dosing air/N2 - at pressure up to 25 bar, temperature up 20C, flow range - 0.5 to 15 ln/min. Machine is mounted on mobile stainless steel frame with local control panel. Last time used in food production. Gusdoxdw Iwepfx Aabjh