Used Pillar Drill for sale (5,982)

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 0 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t Kledpfx Afjfg U Tnopot dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: used, Year of construction: 2008, bore capacity in steel (diameter) 32 mm throat 232 mm Kjdpfeyv N Dqsx Afpslt bore stroke 150 mm Spindle Speed 115 - 2470 U/min. weight of the machine ca. 280 kg dimensions of the machine ca. 500 x 950 x 1800 mm

Condition: new, bore capacity in steel (diameter) 40 mm bore stroke 190 mm turning speeds 50-1800 U/min Short spindle MK 4 Table dimensions 500x400 mm total power requirement 2,2 kW Kodoyv Nr Ujpfx Afpolt weight of the machine ca. 330 kg dimensions of the machine ca. 670 x 500 x 2120 mm

Condition: new, 32 bore stroke 125 mm Short spindle MK 3 throat 210 mm Machine table - usable table surface 390x390 mm Kljdpoyv Nqwefx Afpet table load 65 kg spindle turning speed range 105-2.650 UpM total power requirement 0,75 kW Overall size 750x450x1745 mm weight of the machine ca. 192 kg Standard equipment: - Number of speed ranges 9x2 steps - Coolant device in the machine base - Movable LED machine light - Swivel work table with integrated machine vice on the opposite side opposite side with jaw width 120 mm - Mains cable and plug therefore immediately ready for use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - According to current CE conformity

Condition: used, bore capacity in steel (diameter) 32 mm Short spindle MK 3 Kledpfx Asyv I Unjfpjt bore depth 175 mm spindle throat 320 mm column diameter 130 mm distance spindle /table 140-790 mm feed 0,1 - 0,16 - 0,25 m/min number of spindle speeds 60-1600 weight of the machine ca. 450 kg

Condition: new, 40 mm M 24 M 30 spindle turning speed - stepless 160-2250 U/min Ksdpfx Aoyvvq Dsfpslt MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm 515x360 mm distance spindle /table min./max. 117/701 mm 2 x 14 x 224 mm feed 0,1 + 0,2 mm/U Machine height 1840 mm

Condition: new, 40 mm M 24 M 30 spindle turning speed - stepless 160-2.250 U/min MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm 515x360 mm distance spindle /table min./max. 117/701 mm 2 x 14 x 224 mm feed 0,1 + 0,2 mm/U Ksdpfxeyvvp Te Afpjlt Machine height 1840 mm weight 270 kg

Condition: new, bore capacity in steel St 60 32 mm bore capacity in cast iron GG 20 38 mm Drilling capacity in St 60 40 mm threading in St 60 M 24 threading in GG 20 M 30 Short spindle MK 3 spindle stroke 120 mm Ksdpfxeyvvpto Afpelt throat 293 mm column diameter 115 mm Machine table - usable table surface 515 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117 / 701 mm feed von Hand spindle turning speed - stepless 160 - 2250 U/min total power requirement 1,45/1,9 kW weight of the machine ca. 260 kg

Condition: new, bore capacity in steel St 60 25 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514x360 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 132/724 mm feed von Hand 0 stufenlos Spindle Speed 225-4300 U/min. engine 1,0/1,6 kW Ksdpfxsyvvpgo Afpelt voltage 400 V Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: used, drilling capacity steel/GG: 30/40 mm spindle taper: 3 MK arm length: 350 mm table size: 350 Ø mm spindle sleeve stroke: 150 mm spindle turning speed range: 155; 280; 470 u. 790 rpm carriages: 0,1/0,2/0,3 mm engine: 380 V, 1,1 kW space needed: 950 x 530 x 2300 mm Kedpfsb Hl H Ijx Afpelt weight: 445 kg

Year of construction: 1956, condition: used, machine/vehicle number: 6255, drilling capacity steel/GG: 23 mm spindle taper: 2 MK arm length: 300 mm table size: 300 x 300 mm spindle sleeve stroke: 100 mm Kodpfjbn Ak Usx Afpslt spindle turning speed range: 190 - 1500 rpm engine: 380 V, 0,5/0,75 kW space needed: 410 x 670 x 1950 mm weight: 180 kg

Condition: used, Drilling capacity: 35/40 mm Spindle mount: MK 4 throat: 230 mm Table size: 1050 x 625 mm Table height above floor: 560 mm small / large distance between table and drilling sleeve: 549/960 mm quill stroke: 170 mm spindle speed infinitely variable: 50 - 800 rpm space requirement: 1050 x 1000 x 2170 mm Klodpjb N Ahlefx Afpot Weight: 250 kg

Year of construction: 1984, condition: ready for operation (used), drilling capacity steel/GG: 18/23 mm spindle taper: 2 MK arm length: 250 mm table size: 250 x 370 mm spindle turning speed range: 400 - 5000 rpm engine: 0,48/0,6 kW space needed: 750 x 500 x 1670 mm weight: 130 kg Kodsk Tzu Ropfx Afpjlt

Condition: used, Column Drill Gillardon Type GSB 32 V Machine No.: Year of manufacture approx. 1975 Drilling capacity: 32 mm Taper: MK 4 – long quill Klodpfxsyhf Ize Afpet Throat: 350 mm Quill travel: 170 mm Table size: 570 x 470 mm Column diameter: 140 mm Spindle speed Motor speed step 1, Belt step 1: 50 – 300 rpm, stepless Spindle speed Motor speed step 2, Belt step 1: 100 – 600 rpm, stepless Spindle speed Motor speed step 1, Belt step 2: 100 – 500 rpm, stepless Spindle speed Motor speed step 2, Belt step 2: 150 – 1000 rpm, stepless Motor power: 1 / 1.5 kW Power supply: 380 Volt, 50 Hz - automatic feed approx. 0.1 / 0.16 / 0.25 mm/rev, 3 steps - spindle speed via 2 motor speeds, 2 V-belt stages and variator gearbox - adjustable drilling depth stop - table height adjustment via rack and hand crank - tiltable drilling table with angle scale - drill chuck RÖHM Ø 1 to 13 mm - machine lamp Required space (L x W x H): 1000 x 750 x 2000 mm Weight: 470 kg Good condition

Condition: ready for operation (used), Drilling diameter up to: 32 mm Spindle mount: MT 3 Quill stroke: 120 mm Table clamping surface: 335 x 335 mm Kledpfx Asyvtcqsfpst Table horizontally swivels by: 360° Maximum distance between table and spindle quill: 530 mm Maximum distance between machined base plate and spindle quill approx.: 1105 mm 6 spindle speeds: 160 - 930 rpm Drive motor: 380 V, 0.9/1.3 kW Space requirements: 470 x 900 x 1780 mm Weight: 350 kg

Condition: used, Year of construction: 1970, Column Drilling Machine FLOTT SB32 Spindle mount: MK3 Spindle speeds: 135–770 rpm Round table, diameter 400 mm Overall height: 2 m Weight: approx. 200 kg. Kjdjyvr Acspfx Afpolt

Condition: good (used), functionality: fully functional, Data : Klodpfjy Af Hzjx Afpjt Continuous drilling capacity in ST 60 30 mm 12 speed levels 60 - 2240 rpm Spindle motor 1.1 / 1.6 kW . Projection approx. 320 mm Spindle stroke 170 mm Column diameter approx. 120 mm .

Condition: used, Technical details: bore capacity in steel (diameter): 28 mm throat: 345 mm bore stroke: 190 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 4 spindle speed:: 50 - 1280 / 4 steples U/min feed: 0,1; 0,2, 0,3 manuell/automastic mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 450 x 600 mm table rotating: 360 ° table adjustment: vertical 600 mm column diameter: Ø 160 mm weight of the machine ca.: 273 kg dimension machine xH: 1,0 x 0,71 x 2,0 m Thread cutting with right and left rotation via foot switch Table adjustment via hand crank Without coolant tank Machine vice Klsdpfx Afoyq Rpispjt Quick-action clamping chuck Röhm Supra 3 - 16mm i.D. *

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev Kledpeharwvefx Afpet - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: used, 1 used column-type drilling machine Brand: Alzmetall Kodpfx Afsyqr Dhjpolt Model: AB 3 ESV Drilling capacity: Ø 32 mm 3 automatic feed rates Spindle taper: MK 3 Distance spindle nose - table: 545 mm Throat: 290 mm Quill travel: 160 mm Column diameter: Ø 220 mm Dimensions: 1150 x 650 x 2000 mm Weight: 850 kg

Condition: used, bore capacity in steel (diameter) 20 mm throat 322,5 mm bore stroke 160 mm bore capacity in cast iron 23 mm feed 1-3000 mm/min tool taper SK 30 spindle speed: 55-5000 U/min table surface area ca. 614 x 370 mm column diameter 145 mm machine weight ab. 550 kg with multi-spindle boring head ARBO 20 Automatic turret drilling head with 6 machining stations TYPE ARBO 20 6 work spindles of your choice incl. spindle guard, flange quill, extended column, special software, without protective cover on the machine table manual included (machine and turret drilling head) machine is in a good condition, liitle used. Preowner is a public institution Standard Equipment Machine table adjustment and clamping at the rear of the machine Full motor protection with PTC thermistors for protection against thermal overload - with insulation class F (155°C) Infinitely variable speed control Protection class IP 54, control voltage 24 V Mushroom-shaped pushbutton (latching) for emergency stop on the control panel Main switch (lockable) Technology computer for cutting data determination and machining cycles Drilling depth programming with automatic rapid traverse forward/reverse Precision synchronous tapping without compensating chuck, max. 10 threads/min (spindle speed dependent) Special software for freely programming machining cycles according to DIN/ISO standards Kodpfx Aeyrhynofpolt Drilling depth input via numeric keypad Zero point adjustment via external handheld control unit Operating hour counter for spindle, feed rate, and piece count

Condition: good (used), Column drilling machine: WMW Saalfeld Type BK 25 Klsdpfx Aoyx Uk Ujfpet Year of manufacture: 1963 Spindle taper: MK 4 Drilling capacity: 32 mm Table: 800 x 600 mm Feed

Condition: good (used), Drill, pillar drill, column drill, column drilling machine -Manufacturer: Super Condor, pillar drill type 20 22 -Engine: unfortunately no type designation -Speed: Gearbox V-belt 8-speed -Table size: 255 x 255 mm, travel 670 mm -Spindle holder: MK2 -Spindle stroke: 120 mm Kodpfxst Hy Ure Afpjlt -Feed device: yes -Projection: 205 mm -Column Ø: 100 mm -Dimensions: 830/380/H1730mm -Weight: 205 kg with pallet

Condition: good (used), Drilling machine, pillar drilling machine, column drilling machine, tapping machine, thread cutting machine Klodpfeq Tfg Usx Afpjt -Manufacturer: Möller, pillar drilling machine type MOE 1132 -Engine: Loher 1.5 kW -Speed: 110 - 1450 rpm, continuously variable right-left rotation -Feed: 0.1/0.2/0.3 mm/rev. -Table size: Ø 370 mm, travel 735 mm -Spindle holder: MK3 -Spindle stroke: 170 mm -Projection: 280 mm -Column Ø: 130 mm -Dimensions: 940/650/H1830mm -Weight: 398 kg with pallet

Condition: good (used), Drill, pillar drill, column drill, column drill -Manufacturer: Alzmetall, pillar drilling machine type AB5/S -Engine: VKS 3 kW -Speed: 40 - 800 rpm, continuously variable right-left rotation -Feed: 0.1 - 0.14 - 0.2 - 0.28 - 0.4 mm/rev. Kjdpsr Ngp Ujfx Afpelt -Table size: Ø 500 mm, travel 470 mm -Spindle holder: MK5 -Spindle stroke: 240 mm -Projection: 380 mm -Column Ø: 220 mm -Dimensions: 1450/680/H2160 mm -Weight: 1262 kg