Used Setting Planer for sale (8,873)

Condition: used, for planing heads max. 125 x 180 x 35 mm. Iedpfolf Nddox Ab Ioa

Condition: used, for planing heads max. 125 x 140 x 30 mm. Isdpfx Aelf I Dzob Iea

Condition: used, for planing heads max. 125 x 180 x 35 mm. Ijdpolf I Dwefx Ab Ioa

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Isdpfju Au I Tex Ab Ioa Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes.

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg Isdpfel Dw Nxex Ab Isa cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: used, Capacity: 80 m/min Planer feed table, tested. At speeds up to 80 m/min. Ijdpfog S Dm Nex Ab Iea

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm Iodpfxji Apuho Ab Iea - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: ready for operation (used), Butler Planer With Flott linisher attachment Vast amount of planning tools 6000mm x 2440mm table Ijdowwk Rbjpfx Ab Ija 3000mm between columns 2440mm under the bridge (vertical) New electrics and motor

Condition: used, Year of construction: 2022, front tire size: 710/60R38, rear tire size: 900/65R46, Equipment: front power take-off, VarioGrip / tire pressure regulation system Iodpfjucqcqsx Ab Ioa

Condition: used, Year of construction: 2024, front tire size: 710/60R38, rear tire size: 900/65R46, Equipment: compressed air brake, Section Control Load weight rear wheels 2x 1,000kg Fendt Stability / Control Tire pressure control system Fendt VarioGrip Reverse fan Cooling box Hood camera / Infotainment package Lane guidance RTK Novatel TI Headland Contour Assistant / Agronomy Basi Iedpfx Abett I Nyo Isa

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 107402, spindle diameter: 40 mm, number of spindles: 4, Equipment: CE marking, TECHNICAL DETAILS Iodpfx Aoxw R Rlob Ija Number of spindles: 4 pcs. Spindle diameter: 40 mm Infeed table length: 1,780 mm MACHINE DETAILS Dimensions (L x W x H): 2,170 x 4,600 x 1,830 mm Feed motor: 5.2 kW Feed drive: Cardan shaft drive Extraction nozzle diameter: 140 mm Voltage: 400 V EQUIPMENT CE marking Note: The machine’s bearings are in poor condition.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 120 mm, rotational speed (max.): 18,000 rpm, workpiece width (max.): 410 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum workpiece width: 410 mm Maximum cutting height: 120 mm Maximum speed: 18,000 rpm MACHINE DETAILS Installed total power: 5 kW Motor power: 4 kW Saw spindle: bottom Isdpfx Asxw U Nxeb Ija EQUIPMENT CE marking

Condition: new, Year of construction: 2025, functionality: fully functional, Material receiving unit for four-sided planer OF-100 Isdex Ad Uuspfx Ab Iea Maximum and minimum working length: 1800 – 6100 mm Maximum and minimum working width: 25 – 247 mm Motor power: 0.75 kW Receiving speed: 20 – 100 m/min Cross belts: 7 pcs

Condition: excellent (used), CATALOG NUMBER 7616 TECHNICAL DATA - Shaft width: 510 mm - 4-knife shaft - Table length: 2640 mm - Shaft guard - Cast iron tables - Both tables adjustable - Original cast iron fence adjustable for angle Isdpewbdn Usfx Ab Ioa - Motor: 4 kW - Extraction port diameter: 160 mm - Dimensions (L/W/H): 2640x1000x980 mm - Weight: 970 kg ADVANTAGES – German manufacture – Not repainted – Long tables – Used jointer – Very good condition Net price: 9900 PLN Net price: 2350 EUR at an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: like new (used), Year of construction: 2022, DEMONSTRATION MACHINE!!! For sale is a used Felder thickness planer D9-51 with a thickness capacity of up to 254 mm. The machine is in like-new condition and has been refurbished and inspected by our professional technicians. (fully functional) Technical data: - Planing width: 504 mm - 4-knife cutter block (replaceable knives system) - Electric thickness table adjustment with LED display - Planing thickness: 4–254 mm - Variable feed rate: 4–16 m/min - Max. chip removal: 8 mm - 7.5 HP (5.5 kW) motor, 400 Volt - Year of manufacture: 2022 The planer is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: planer, thicknesser, thicknessing machine, Felder Reference: R-D1618 Iodpfx Abexzph De Ioa

Condition: good (used), Schmedt PraForm 21-50 joint-setting press Iedpfxjxx Hyxo Ab Ioa Book press with a joint forming. Production Schmedt, Germany. The machine is in very good condition, ready for production. Technical data: max format: 450 x 520 x 100 mm Weight 264kg Power supply 230V + compressed air.

Condition: used, heavy-duty surface planer SCM F 520 planing width 520 mm table length 2,960 mm hydraulic height adjustment of infeed table via foot pedal, with micrometer display for chip removal 4-knife safety cutterblock sharp and hollow joint adjustment main motor 4 kW electric motor brake CE version Machine is FULLY FUNCTIONAL and in GOOD CONDITION from vocational school available from stock in Lieboch Ijdpfx Asxzdguob Isa

Condition: new, Year of construction: 2025, functionality: fully functional, Material feed unit for four-sided planer IF-100 Maximum and minimum length of workpiece: 1050 – 6100 mm Maximum and minimum width of workpiece: 50 – 247 mm Maximum and minimum thickness of workpiece: 12 – 100 mm Feed speed controlled by frequency inverter: 20–100 m/min Iedsxz Ax Njpfx Ab Ija Main motor power: 5 kW Accelerating upper feed rollers: 2 pcs Accelerating lower feed rollers: 2 pcs Driven feed rollers: 3 pcs Feed roller dimensions: 180 × 100 mm Feed motor power with flat chain: 0.37 kW Number of flat feed chains: 5 pcs

Condition: excellent (used), Catalogue Number: 7641 ADVANTAGES – The best wide planer for wet and dry wood – Ideal for machining logs, floorboards, etc. – 3 planing shafts + 3 spindles – Manufactured by German brand KUPFERMUHLE – Used planer, in very good condition TECHNICAL DATA Max planing width: 800 mm Max planing height: 200 mm From above: - Feed-in roller, toothed, powered - Anti-kickback fingers - Pressure unit - 2 toothed feed rollers - Pressure unit - Planer shaft 800 mm, 4-knife, 7.5 kW - Pressure units - Profiling shaft 800 mm, 4-knife (equipped with 3 straight knives, 1 profile knife) - Pressure unit - Smooth outfeed roller From below: Isdpfxowfti Ao Ab Isa - Guide rail - Infeed table - Smooth feed roller - Planer shaft 800 mm, 4-knife, 7.5 kW - 2 smooth feed rollers - Split smooth sliding roller - Side pressure at outfeed From the rear: 2 side spindles + pressure units: 1) Right vertical 90 mm – 4 kW 2) Left vertical 90 mm – 4 kW - Spindle diameter: 35 mm - Alternately adjustable spindles - Spindles adjustable up/down, right/left 3) Additional horizontal bottom spindle 350 mm, adjustable up/down & right/left – 5.5 kW - Spindle diameter: 40 mm On outfeed: 4 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - 6 feed speeds: 7/14/9/18/11.5/23 m/min - Feed motor: 2.2 kW - Extraction port diameters: 3×180, 130 mm - Dimensions (LxWxH): 3100x2000x1900 mm - Weight: approx. 3500 kg Net price: 64,900 PLN Net price: 15,450 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, Four-side planer Weinig Profimat 22N Ijdpfx Absxzbn Ne Ija Working width: 220 mm Working height: 120 mm Number of spindles: 6 Spindle arrangement: Bottom – 4 kW Right Left – 5.5 kW Top – 5.5 kW Bottom – 4 kW Universal – 4 kW Feed speed adjustable via variator: 6–22 m/min Feed motor power: 3 kW Spindles with adjustment

Condition: excellent (used), CATALOG NUMBER 7556 Technical specifications: - Min / max working width: 20 / 240 mm - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal, 240 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 240 mm, 7.5 kW - All heads adjustable vertically and horizontally - Spindle diameter: 40 mm – Top: - 6 powered infeed rollers, toothed (including 2 double rollers) - 2 powered outfeed rollers, smooth rubber – Bottom: - Lateral pressure before and after the roller on the lower table - Powered infeed toothed roller, swiveling, on the lower table before the first spindle - 2 pneumatic lateral pressure units - Powered outfeed roller, smooth metal - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table adjustable vertically - Centralized lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment via inverter: 6–30 m/min - Feed motor: 3 kW - Feed through Cardan shafts - Enclosed in a cabin + - Extraction outlet diameter: 4 x 150 mm - Dimensions (L x W x H): 3750 x 1750 x 1800 mm - Weight: 3300 kg Iodpfx Asvyzn Rob Ija ADVANTAGES – Four-head configuration – Ideal for wet and dry wood – Used machine, excellent condition Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Working width: 230 mm Working height: 160 mm Number of spindles: 7 Iedpoxlcufofx Ab Ija Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Condition: excellent (used), Catalogue number 6338 TECHNICAL DATA - Maximum working width: 230 mm - Maximum working height: 160 mm 7 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 230 mm, 7.5 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 7.5 kW 7) Universal 360°, 230 mm, 7.5 kW - All spindles adjustable up/down and right/left - Spindle diameter: 40 mm - All spindles equipped with brake - Spindle speed: 6,000 rpm From above: - 6 geared, steel infeed rollers including 2 double rollers - 4 rubber outfeed rollers including 1 double roller - 3 outfeed pressure rollers From below: - Side pressure roller at infeed - Geared, swiveling, steel infeed roller in lower table - 3 smooth steel feed rollers - Pneumatically adjustable rollers - Length of infeed table: 1,190 mm Iodpfxohp N R Io Ab Ioa - Centralized table lubrication - Electric planer thickness adjustment - Lifting motor: 0.56 kW - Stepless feed rate adjustment via inverter: 6–24 m/min - Feed motor: 3.7 kW - Cardan shaft roller feed - Enclosed in cabin - Extraction port diameter: 7 x 125 mm - Dimensions (L x W x H): 5,100 x 2,070 x 1,900 mm - Approximate weight: 5,000 kg ADVANTAGES - 7 heads - Universal spindle - Ideal for both wet and dry wood - Spindles equipped with brakes - Full technical documentation (DTR) - Used planer, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR at an exchange rate of 4.2 EUR (Prices may vary with larger fluctuations)

Condition: excellent (used), Four-side planer SCM Compact 23 Working width: 230 mm Working height: 120 mm Number of spindles: 4 Iedpjxyv A Ejfx Ab Ija Spindle arrangement: Bottom Right Left Top Spindle speed: 6000 rpm Two feed speeds: 6–12 m/min Adjustable spindles

Condition: excellent (used), Catalogue number 7832 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 pcs - max. thickness of processed element: 300mm - digital planing thickness display – from above: - kickback fingers Iedpfjxzhxnjx Ab Iea - sequential infeed roller - planing shaft - 2 smooth, driven, metal outfeed rollers – from below: - adjustable rollers in the lower table: 2 pcs - table on 4 screws - motor: 7.5kW - brake - electric table lifting - 2 feed speeds: 7/14m/min - feed motor: 0.75/1.1kW - extraction nozzle diameter: 160mm - dimensions (L/W/H): 1540x1220x1230mm - weight: 1300kg ADVANTAGES – Polish manufacture – electric table lift – sectional feed roller – used thickness planer, very good condition Net price: 32,900 PLN Net price: 7,840 EUR based on 4.2 EUR rate (Prices may change with significant variations in exchange rates)