Used Planer Grinders for sale (2,705)

Condition: used, Year of construction: 2001, with air cushion table, chamfering unit Maximum working width: 260 mm Dlsdexr A Npspfx Addsa Maximum working height: 160 mm Number of spindles: 6 units 1st spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Rotational speed: 6000 rpm Motor power: 11.0 kW 2nd spindle: right Spindle diameter: 40 mm Clamping length: 170 mm Rotational speed: 6000 rpm Motor power: 11.0 kW 3rd spindle: left Spindle diameter: 40 mm Clamping length: 170 mm Rotational speed: 6000 rpm Shared motor with right spindle, with ATS/M system (automatic positioning control) 4th spindle: top Spindle diameter: 40 mm Clamping length: 270 mm Rotational speed: 6000 rpm Motor power: 11.0 kW With ATS/M system (automatic positioning control) 5th spindle: top, chamfering unit 6th spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Rotational speed: 6000 rpm Motor power: 11.0 kW Motor brakes: mechanical Electrical hood interlock: Yes Height adjustment of top spindle: electric with feed Feed brake system: Yes Feed speed steplessly adjustable up to: 3 - 26 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan shaft Lubrication pump: automatic Max. jointing cutting depth: 10 mm Jointing cutter on jointer: Yes Driven rollers in table: 1 unit Control type: PLC control Spindle measurement display: digital readout Infeed rollers before jointer: Yes Air cushion table: two-lane Central lubrication point: Yes Description: Jointer table with jointing fence 1.0 m, pneumatic pressure Infeed roller before jointer driven rollers in table Total connected load: 52 kW Location: supplier

Condition: like new (used), Year of construction: 2022, x-travel 2500 mm y-travel 3500 mm z-travel 1500 mm Control HEIDENHAIN TNC 640 c-axis +-360 ° milling head -swivable ° milling head swivable ca. +-360 ° table dimension - longitudinal 2500 mm table dimension - cross 3500 mm table load 6 t/m² coolant IKZ 70 bar Feed speed 60 m/min. spindle turning speed range 24000 U/min tool taper HSK-A63 milling spindle motor S6 (40% / 2 min) 41 kW max. torque on the spindle S6 (40% / 2 min) 49 Nm milling spindle motor S1 (100% / 2 min) 34 kW max. torque on the spindle S1 (100% / 2 min) 39 kW tool change unit 60 Pos. weight of the machine ca. 74 t dimensions of the machine ca. 4 x 7.5 x 5.4 m This thermosymmetrical, ergonomic, universal ZIMMERMANN FZU32 Dodpfjvwgtyox Addela portal milling machine is in mint condition and available immediately. DESCRIPTION: The FZU32 is a remarkably compact 5-axis portal milling machine for machining aluminium machining of aluminium, fibre composites, plastics, ureol and steel. steel. Thanks to the particularly rigid, newly developed centre-guiding gantry, we can meet the increasing requirements in model, tool and mould making. mould making. This thermo-symmetrical design makes the FZU32 less susceptible to adverse environmental conditions.

Condition: used, heavy-duty jointer planer SCM F 520 E Planing width: 520 mm Table length: 2,960 mm Motorized height adjustment of the infeed table, with electronic digital display 4-knife safety cutterblock Adjustment for straight and hollow joints Main motor: 4 kW Electric motor brake CE compliant Dljdpfsxyf Htox Addja Machine is FULLY FUNCTIONAL and in GOOD CONDITION Available from stock Lieboch

Condition: excellent (used), functionality: fully functional, feed length X-axis: 230 mm, feed length Y-axis: 140 mm, spindle speed (min.): 6,000 rpm, extraction nozzle diameter: 140 mm, planer shaft diameter: 40 mm, workpiece height (max.): 140 mm, compressed air connection: 120 bar, workpiece width (max.): 230 mm, input voltage: 400 V, warranty duration: 2 months, number of spindles: 5, feed roller diameter: 140 mm, table width: 230 mm, blade shaft diameter: 40 mm, Equipment: cabin, motor brake, Four-side planer Weinig Unimat 500 Working width: 230 mm Working height: 140 mm Number of spindles: 5 Spindle arrangement: Bottom: 5.5 kW Right Left: 7.5 kW Top: 11 kW Bottom: 5.5 kW Feed speed adjustable by inverter up to 30 m/min Feed motor: 4 kW Drive via cardan shafts Pneumatic hold-downs 3 axes controlled from the control panel (width, height, hold-down position) Air cushions in the worktable Infeed table length: 2470 mm CE certified DTR documentation Dledpfxewv Slkj Addea

Condition: used, Year of construction: 2022, Working width: 410 mm Planing shaft: Tersa Number of knives: 4 Dressing table length: 2000 mm Dressing fence angle adjustable: yes 45° to 90 maximum passage thickness thickness planer: 250 mm height adjustment thicknessing table: electric display of planing thickness: mechanical digital display Feeding speed: 6 m/min Feed roller: steel Extraction roller: steel table rollers: no Engine power: 4.5 kW Motor brake: yes, automatic Suction connection: 120mm Machine length: 2000 mm Machine width: 882 mm Dedpfx Adogqwxusdjla Weight: 615kg

Condition: ready for operation (used), Year of construction: 1982, Make: Panhans Model: 325 Year of manufacture: 1982 GS-certified Motor: 5.5 kW Control panel on top Djdpjx Dyllsfx Addela Planing width approx. 510 mm Infeed table length approx. 1600 mm Outfeed table length approx. 1150 mm Table lips slotted/low-noise Number of knives: 4 pcs Knife system: strip planer knives Chip thickness display Concave/pointed jointing Automatic brake Concave/pointed joint setting Extraction connection D 140 mm Space requirement approx. 2800 mm x 800 mm x 1200 mm Weight approx. 800 kg Price 3,000.-

Condition: ready for operation (used), Elb SWE 6 VA II Worklenth without magnetic table: 600 mm Grindingwidth: 400 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 400 mm Travel Z-axis (autom.): 450 mm Dimensions of the table: 1100 x 450 mm Dledpsx Dd Idofx Addsa Dimensions magnetic table: 700 x 200 mm Max dia grindingstone: 300x50x76 mm Spindlespeeds: 1400 x 1800 rpm Motorpower: 5.5 kW, total 13 kW Tension needed: 400V

Condition: used, Year of construction: 1999, Technical details: x-travel: 3 500 mm y-travel: 2 200 mm z-travel: 1 200 mm c-axis: +/- 200° control: Heidenhain TNC 426 spindle rpm - counter clockwise:: max. 10000 spindle rpm - clockwise:: max. 10000 distance between columns: 2 500 mm distance spindle /table: vertical: 1230 mm clamping surface area: Tisch: 3000 x 2000 mm Dsdpfx Adou Nc Emedela table load: 10 t tool taper: HSK A 63 feed:: X/Y/Z: max. 20 m/min. compressed air: 8 bar total power requirement: ca. 100 kW weight of the machine ca.: 40 000 kg dimensions of machine: 18,0 x 6,0 x 5,8 m 5 axis Portal Milling Machine 5-axis portal milling machine Milling spindle: make Hauser type HS 256A-01 Uni, speed max. 10.000 rpm. direct drive Milling head: make Hamül, fork type, A-axis integrated = angle of rotation +/- 110°. Tool changer: Hamül make, rotary indexing table type with rotary table, for 32 tool positions chip conveyor: 2 pieces hinged belt conveyor make DGS with water tank, insertion length 8.500mm make BKW type DL 55V-2KK, capacity 2,41 l/min.; (combined for oil- water mixture for oil and spindle cooling) Cooling lubricant system: belt filter make DGS type SBF 150 Operation: via control panel type Heidenhain LE 426 X-, Y- and Z-axis with Heidenhain measuring rods. manual control unit HR 410 hydraulic counterbalance (Z-axis) Equipment: Enclosure (protective walls with viewing windows and protective doors) hydraulic system working area lighting *

Condition: used, Manufacturer: Gendron Dsdewnhkmjpfx Addola Type: RU 28-100 Max. grinding length: 1000mm Max. grinding diameter: 280mm Center-height: 155mm Table: 1660x150mm Grinding wheel: 300mm Machine-dimensions: 2700x1550x1500mm - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, extraction nozzle diameter: 140 mm, planer shaft diameter: 40 mm, workpiece height (max.): 230 mm, type of input current: three-phase, number of spindles: 7, working range: 230 mm, blade shaft diameter: 50 mm, Equipment: cabin, motor brake, Four-sided planer Weinig Hydromat 23, 80m/min Working width: 230mm Working height: 160mm Number of spindles: 7 Spindle configuration: 1. Bottom: 15kW 2. Right: 11kW 3. Left: 11kW 4. Top: 15kW 5. Top: 7.5kW (hydro support) 6. Bottom: 11kW (hydro support) 7. Universal: 11kW (variable speed via frequency inverter) Planing dimension control from ATS panel Spindle speed: 6000 rpm Spindle diameter: 50mm 5 feed rollers in working table Feed speed adjustable via frequency inverter up to 80m/min Dodexww Hmjpfx Addola Feed driven by cardan shaft Pneumatic hold-downs Technical documentation included Machine dimensions: 460x230x200cm (H) Weight: 6000kg

Condition: used, Year of construction: 2021, Working width: 410 mm Planer shaft: Strip knives Number of knives: 4 Planer table length: 2360 mm Dsdpfx Adjxnhpgodola Planer table adjustment: Lever Chip removal display: Scale Hollow/pointed joint display: - Planer fence angle adjustable: Yes Motor power: 4.4 kW Machine length: 2360 mm Machine width: 860 mm Weight: 475 kg

Condition: ready for operation (used), Year of construction: 2000, Casadei Matrix A (identical machine to SCM Compact O, R, L, U model) - 2-axis control for aggregate positioning - Four-sided planer and moulding machine - Working width: 25 to 230 mm - Working height (wood thickness): 6 to 155 mm - Max. final cross-section of workpiece: 155 x 230 mm - Minimum workpiece length: 480 mm - Max. adjustable cutting depth: 10 mm - Spindle speed: 6,000 rpm MACHINE EQUIPMENT: - Robust, welded machine frame - Large, soundproofed hood with gas struts - Raised control panel on operator side - Steel infeed table 2,500 x 250 mm Table height: 880 mm Side-mounted, spring-loaded infeed conveyor Manual table lubrication behind jointer 1) Lower horizontal spindle 5.5 kW 2 & 3) Vertical spindles (right & left), each 7.5 kW 4) Upper horizontal spindle 7.5 kW FEED: - Feed speed, adjustable: 5 to 25 m/min Feed motor: 1.1 kW (1.5 HP) Dlsdpfx Aox Dx Acjddsa ADDITIONAL FEATURES: - CE marking - Power supply: 380 V three-phase, 50 Hz - Lockable main switch, automatic star-delta start Emergency stop front and rear - Installed power: 37 kW (50 HP), IN 62A - Braked motors - Spindle drive via cardan shafts Motor for height adjustment: 0.37 kW - Axial spindle adjustment: Lower horizontal spindle: 0 to 15 mm Upper horizontal spindle: 0 to 25 mm Vertical spindles: 0 to 25 mm - Permissible tool diameters: Lower horizontal spindle: Ø 120 to 140 mm Vertical spindles: Ø 100 to 180 mm Upper horizontal spindle: Ø 100 to 180 mm End milling cutter: Ø 140 x 12 x 40 mm - Recommended compressed air supply: 7 bar Working pressure: 6 bar Average consumption: 0.85 Nl/cycle Connection: 1/2" G Operating manual and tools included Year of manufacture: 2000 Price: €9,500

Condition: ready for operation (used), X-beweging: 6000 mm Y-beweging: 1500 mm Dodpfsx Dd Nhox Addsla Z-beweging: 2000 mm - 2 hoofden - open kolom! - elektrisch gereviseerd in 2010 - Heidenhain digitale uitlezing - Leroy Somer elektra voor afvoer van tafel - frequentieregeling op alle assen - tafelafmetingen: 6000 x 1800 mm - voldoet aan de huidige (Franse) gezondheids- en veiligheidsvoorschriften - Belasting op de tafel: 18 ton Machine werd gebruikt in de gereedschapswerkplaats van een autofabrikant. Enkele plano freesmachine Korting op een geldbedrag Fresadoras zijn een soort pilaartjes van een kolom

Condition: used, total height: 1,550 mm, total length: 1,600 mm, total width: 1,200 mm, Empty weight: 2.100 kg - Documentation available: No - CE marking present: Yes - CE certificate present: No - Motor power: 4.5kW - Center distance: 480mm - Model: inderslijper extern - Travel X: 700mm - Center height: 100mm - Grinding diameter: 200mm - Travel Y: 100mm - Table length: 1150mm - Table width: 130mm - Transport dimensions: 1600mm x 1200mm x 1550mm (l x w x h) - Transport weight [kg]: 2100kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dsdpfx Aewnh Tzsddola Lukas van Rossum

Condition: new, Year of construction: 2025, Working width: 410 mm Planing shaft: Tersa Number of knives: 4 Planer table length: 2000 mm Dressing fence angle adjustable: yes 45° to 90 Maximum passage thickness of thickness planer: 250 mm Height adjustment of thicknessing table: electric Planer thickness display: digital display Feed speed: 6/12 m/min Infeed roller: Steel Pull-out roller: steel Table rollers: no Motor power: 4.5 kW Motor brake: yes, automatic Suction connection: 120mm Dljdpfx Adol D Rwtjdoa Machine length: 2000 mm Machine width: 882 mm weight: 615 kg

Condition: used, Year of construction: 1976, Cylindrical cylinder grinding machine Model: Int+Ext Conventional Manufacturer: PONAR  Type: RUP 28x1000 Center distance: 1000mm Center height: 155mm Grinding diameter: 310mm Travel x: 1000 Table dimension length: 1650 Table dimension width: 150 Transport dimensions Dimensions part 1: 2900x1600 Dsdpfxswnhfdj Addjla Weight: 1800kg Dimensions part 2: 1200x800x600 Weight: 100kg Dimensions part 3: 1250x1210x1440 Weight: 150kg Dimensions part 4: 1200x800x11001 Weight: 200kg - Year: 1976 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, Working width: 410 mm Cutterhead: spiral cutterhead Number of knives: 66 Jointer table length: 2020 mm Jointer fence angle adjustable: yes, 45° to 90° Maximum planing thickness (thickness planer): 230 mm Thickness table height adjustment: electric Planing thickness display: digital readout Feed speed: 5.5 / 10 m/min Infeed roller: steel Outfeed roller: steel Table rollers: no Motor power: 5.3 kW Motor brake: yes, automatic Dedjxzfwhspfx Addjla Extraction connection: 100 mm Machine length: 2020 mm Machine width: 882 mm Weight: 480 kg

Condition: used, Price: On request - Documentation available: No - CE certificate present: No - Center distance: 1000mm - Model: inderslijper extern - Travel X: 1000mm - Center height: 135mm - Grinding diameter: 270mm - Travel Y: 600mm - Table length: 1500mm - Table width: 130mm Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dledpfjw Sk Dvjx Addoa Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,700 mm, total width: 2,000 mm, total length: 4,500 mm, Empty weight: 12.000 kg - Documentation available: No - CE certificate present: No - Digital: Yes - Table length: 1000mm - Type digital: Newall 2-A - Magnet size: 1000mm - Transport dimensions: 4500mm x 2000mm x 2700mm (l x w x h) - Transport weight [kg]: 12000kg Djdow A Ngljpfx Addsla - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,800 mm, total length: 3,500 mm, total width: 2,300 mm, Empty weight: 5.800 kg Djdjwya A Sjpfx Addela Price: On request Grinding diameter: 315mm Grinding depth: 500mm Swing: 500/600mm Stroke of table: 800mm - Documentation available: No - CE certificate present: No - Serial number: 31577 - Model: inderslijper intern - Travel X: 500mm - Grinding diameter: 600mm - Transport dimensions: 3500mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 5800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2004, total height: 2,000 mm, total length: 1,700 mm, total width: 1,500 mm, Empty weight: 900 kg Price: On request - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: C30029 - Travel Z: 450mm - Digital: Yes - Model: kslijper - Travel X: 472mm - Center height: 450mm - Travel Y: 205mm - Table length: 465mm - Max. spindle speed: 2900rpm - Type digital: Fagor 2A - Magnet size: 400mm - Table width: 200mm - Transport dimensions: 1700mm x 1500mm x 2000mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 3 Dodpfx Aewmf Awoddola Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total width: 1,500 mm, total length: 2,550 mm, total height: 1,700 mm, Empty weight: 2.000 kg - Documentation available: No - CE certificate present: No - Center distance: 700mm - Travel X: 900mm - Center height: 145mm - Grinding diameter: 290mm - Travel Y: 250mm - Table length: 1430mm - Table width: 160mm Dledpfxjw Rywvs Addoa - Transport dimensions: 2550mm x 1500mm x 1700mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1999, Price: On request - Year: 1999 - Documentation available: Yes Dsdpfx Ajwnhyheddjla - CE marking present: Yes - CE certificate present: No - Travel Z: 360mm - Travel X: 900mm - Center height: 950mm - Grinding diameter: 400mm - Travel Y: 550mm - Table length: 790mm - Max. spindle speed: 3400rpm - Table width: 380mm Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, total height: 1,900 mm, total length: 2,300 mm, total width: 2,200 mm, Empty weight: 2.000 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 86721 - Motor power: 1.5kW - Travel Z: 400mm - Model: kslijper - Travel X: 700mm - Grinding diameter: 250mm - Travel Y: 400mm - Table length: 900mm - Magnet size: 350mm - Table width: 350mm - Transport dimensions: 2300mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dledpfjw E If Eex Addea Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,700 mm, total length: 2,300 mm, total width: 1,500 mm, Empty weight: 2.000 kg - Documentation available: No - CE certificate present: No - Serial number: OF50-158 - Motor power: 2.0kW - Travel Z: 400mm - Digital: Yes - Model: kslijper - Travel X: 500mm - Travel Y: 200mm - Table length: 720mm - Max. spindle speed: 4000rpm - Type digital: VisoData - Magnet size: 400mm - Table width: 200mm - Min. spindle speed: 1000rpm - Transport dimensions: 2300mm x 1500mm x 1700mm (l x w x h) - Transport weight [kg]: 2000kg Financial information Dljdpfxownings Addja VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum