Used Plasma for sale (461)

Condition: new, Year of construction: 2006, type of input current: three-phase, total height: 800 mm, total width: 520 mm, total length: 800 mm, input voltage: 400 V, Professional Jackle Power Plasma 160A cutting machine for sale. German-made industrial equipment, suitable for a variety of metal cutting applications. Power supply: 400V, three-phase. Cutting current adjustable from 20A to 160A. The machine is in working condition. Gedpfxjy U Izfo Akaoug

Condition: used, functionality: fully functional, Micro and mini plasma welding generator, complete with torch and power cables. Suitable for welding stainless steel with thicknesses ranging from 0.5 to 1.00 mm. Power supply: 380-41.5V (12A). Maximum welding current: 150A, with a welding speed of 5 to 10 mm/sec. Godpfx Akozlud Ejasug

Condition: used, Year of construction: 2009, 2009 HGG Profiling Equipment PLC 600 Plasma CNC Profile Cutting Line with Procam Software Cutting Capacity Pipe Range Ø48-Ø610mm. Maximum Cutting Angle 45°. Maximum Pipe Weight 3 Ton. Note: Hard Drive Has been Removed For Sale, Replacements Are Readily Available From HGG. With Fume Extraction Unit, Safety Light Curtain Guards & Signal Tower. Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site. Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site. Gujdpfx Ajzy Itvokaog

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, working range: 1,500 mm, total length: 4,500 mm, track width: 2,000 mm, table length: 3,000 mm, ZINSER 1225, CNC 6010 Year of manufacture: 2023 Arc height control ZAC 5070 with Hypertherm plasma system XPR 170 Core Plus Cutting table 1,500 x 3,000 mm incl. extraction system Software available upon request. Guodjzwvx Iopfx Akaeg

Condition: good (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, working range: 3,000 mm, sheet thickness (max.): 40 mm, The information was found successfully. Here is the updated listing with added cutting parameters: Teknohaus Thermcut 3000D – CNC Plasma Cutting Machine For sale: a well-maintained Finnish-made CNC plasma cutting machine. The machine has been used in production and operates flawlessly. Technical specifications: Manufacturer: Suomen Teknohaus Oy Model: Thermcut 3000D Year of manufacture: 2007 Serial number: 320011 Supply voltage: 3 × 400 V Plasma source: Hypertherm HyPerformance HPR130 (130 A) Controller: Thermcut / Teknohaus CNC controller with touchscreen Gujdoywlh Ujpfx Akajg USB interface for program transfer Cutting capacity (mild steel): - High-quality, virtually dross-free cut: 16 mm - Production piercing: 25 mm - Maximum cutting thickness (edge start): 38 mm Features: - Large cutting table (approx. 3000 mm wide) - Two plasma channels (Plasma 1 & Plasma 2) - Water table for spark and fume management - Ideal for cutting steel, stainless steel, and aluminium Machine viewings available by appointment; the machine can be seen in full working order. 📞 For further information, please call.

Year of construction: 1989, condition: good (used), Operating hours: 17 Machine number: 160973 Power: 4,500 W Gsdpfx Asbfa Hwekajug Voltage: 220 V No-load voltage: 320 V Current: 16 A Insulation class: F Cooling type: F

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 11139737, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, empty load weight: 1,950 kg, The machine will be available starting mid-September! TECHNICAL DETAILS Working area: 6,000 × 2,000 mm Working length: 6,000 mm Gusdpfx Aezv N Hpokasg Working width: 2,000 mm Max. sheet thickness: 30 mm Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 150 mm MACHINE DETAILS Plasma source: Kjellberg HiFocus 161 neo Cooling type: Water Voltage: 3 × 400 V Power: 9 kW Frequency: 50 Hz Number of phases: 3 Net weight: 1,950 kg EQUIPMENT Dust extraction system: Donaldson Torit DCE

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 Gedpezizkyjfx Akaeug For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Year of construction: 2020, functionality: fully functional, product height (max.): 610 mm, Equipment: double-sided, FICEP NOZOMI 601 RAZ - ROBOTIC PLASMA CUTTING SYSTEM FOR STRUCTURAL STEEL | YEAR 2020 The Ficep NOZOMI 601 RAZ is a fully automatic robotic plasma cutting system for three-dimensional thermal processing of steel profiles and beams. An anthropomorphic 9-axis articulated robot machines all four profile faces without re-clamping, replacing layout, thermal cutting, coping and grinding with one automated work cell - less handling, shorter throughput times, reproducible quality from CAD/CAM data. CONDITION Used - technically sound. The machine is currently in productive operation. Year 2020 - a comparatively young machine of its class on the used market. - Inspection UNDER POWER during ongoing production possible by appointment. - Handover as preferred: directly from ongoing production (cleaned and serviced) or - at additional cost - reconditioned by ASM. - Details on the technical condition are disclosed individually upon serious interest. FUNCTION & APPLICATION The NOZOMI 601 RAZ combines plasma cutting, coping, bevel cutting, weld-seam preparation and marking in a single pass. The non-contact laser scanner measures the profile surfaces and determines the torch start position automatically. The system processes H-beams, U-channels, L-angles and flat bar. Typical applications: structural steel, bridge and plant construction, series production of connection and node details. Plasma processing uses the Hypertherm True Hole process. TECHNICAL DATA - Manufacturer: Ficep | Model: NOZOMI 601 RAZ | Year: 2020 | S/N: 36291 - Machine type: Robotic plasma cutting system (thermal profile processing) - Condition: used, technically sound - Profile size min.: 80 x 10 mm - Profile size max.: approx. 610 mm profile height (flange width to be confirmed during inspection) - Profile types: H-beams, U-channels, L-angles, flat bar - Machining sides: 4 | Clamping: automatic - Number of CNC axes: 9 | Design: anthropomorphic articulated-arm robot - Profile measurement: laser scanner, non-contact, fully automatic (multi-surface) - Cutting process: plasma | Plasma cutting heads: 1 - Plasma technology: Hypertherm True Hole - Bevel cutting: 45-degree bevels, copes, weld-seam preparation - Marking function: yes (orientation marks, weld symbols, labelling) - Software: Steel Projects PLM (licence transfer on request), free vector programming, automatic nesting - Infeed length: 16 m | Outfeed length: 16 m - Extraction: integrated particle filter system Machine weight, electrical connection values and max. plasma cutting thickness are confirmed on request. SCOPE OF DELIVERY - 1 x Ficep NOZOMI 601 RAZ robotic thermal cutting system (year 2020) - 1 x anthropomorphic 9-axis articulated-arm robot - 1 x plasma cutting head (Hypertherm True Hole compatible) | 1 x automatic torch changer Guedpoxq Rpnjfx Akaog - 1 x laser-scanner measuring system (non-contact, multi-surface) - 1 x infeed roller conveyor (16 m) | 1 x outfeed roller conveyor (16 m) - 1 x automatic clamping device | 1 x integrated extraction system LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) is a specialist for Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Arrange an inspection under power | Price on request. Sale exclusively to commercial customers (B2B).

Year of construction: 1999, condition: used, Working area X/Y: 1500mm/3000mm, plasma source: NERTAJET HP120, control: DIGISAF 100, max. cutting capacity steel/stainless steel/aluminum: 20mm/15mm/20mm, wet and dry cutting possible, extraction system available. Documentation available. Inspection possible by arrangement. Guedpfxezun U Aj Akaog

Year of construction: 2008, condition: ready for operation (used), Mains voltage: 3x 400V, 50Hz, fuse protection: 125A slow-blow, maximum connected load: 83kVA, cutting current at 100% duty cycle: 80 to 300A, output voltage: 112 to 200V, rated output current: 300A, duty cycle: 100%, maximum input current: 120A, protection class: IP22, insulation class: F, cooling method: AF (air cooling), no-load power consumption: 1.3kW, maximum operating pressure: 0.55MPa (5.5bar), impulse withstand voltage (Up): 17kV, plasma torch: PB-S80 W, compatible plasma gases: O₂, air, Ar, H₂, compatible swirl gases: air, N₂, length: 1375mm, width: 870mm, height: 1505mm, weight: 556kg. Inspection on site is possible. Godpfxszhnucj Akajug

Year of construction: 2007, condition: ready for operation (used), A complete CNC gantry plasma cutting machine ESAB is available. Travel X/Y: 12000mm/4000mm, max. workpiece dimensions X/Y: 12000mm/3000mm, max. material thickness steel: 150mm, total system dimensions X/Y/Z: approx. 15000mm/5200mm/1500mm. System components: Cooling unit Kjellberg KWE 360, gas box Kjellberg PGV 3 and plasma connection Kjellberg PBA-360. The system has fire damage. Documentation available. On-site inspection is possible. Guodpfx Akjv Dkcfoasg

Year of construction: 2010, condition: ready for operation (used), A plasma cutting system is offered. Cutting current: 20A - 130A, cutting voltage: 88V - 132V, supply voltage: 400V, max. current consumption: 46A, max. gas inlet pressure: 12bar, ignition voltage: 17kV, gas flow O2: 5300l/h, gas flow N2: 3300l/h, gas flow air: 3200l/h, protection class: IP22. Equipped with automatic gas console, plasma gas control PGC control unit, extensive hose package bundle, mobile machine frame. Machine weight: approx. 350kg, machine dimensions X/Y/Z: approx. 1100mm/700mm/1450mm. Inspection possible by arrangement. Godpfjy Tauhex Akajug

Year of construction: 2020, condition: ready for operation (used), Treatment width: 8mm-12mm, max. plasma generator diameter: 32mm, plasma generator length: 210mm, cable length: 3m, inlet pressure: 5bar-8bar, gas consumption: approx. 2m³/h, generator power: 300W, frequency: approx. 40kHz, dimensions X/Y/Z: approx. 420mm/140mm/500mm, control: manual/semi-automatic, operating hours: 81h. Documentation available. On-site inspection is possible. Godpfxst I Tyde Akasug

Year of construction: 2007, condition: ready for operation (used), A Kjellberg plasma cutting system is available. Plasma source: Kjellberg HiFocus 160i, max. material thickness: 40mm, track width: approx. 3100mm, gantry dimensions X/Y: 2000mm/2000mm, runway height: 500mm, working dimensions X/Y: 2000mm/12000mm. The machine was expanded with inkjet in the year 2015. Including suction and filter. The control was renewed in the year 2021. Documentation available. An inspection on site is possible. Guedjxwn Injpfx Akajg

Year of construction: 2010, condition: ready for operation (used), Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. Gusdpori Skaefx Akajg

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Gjdpfx Aswmqwyskasug

Year of construction: 2008, condition: ready for operation (used), A complete plasma cutting system Oerlikon including peripheral equipment is available. 1) CNC plasma cutting system Oxytome 30, year of manufacture: 2008. 2) Plasma source Air Liquide Nertajet HP125, year of manufacture: 2008. 3) Filter unit Donaldson Torit DCE DFPRO 8-Cyclo, year of manufacture: 2008, weight: approx. 1625kg. 4) Cooling unit Air Liquide Friojet-30, year of manufacture: 2008, cooling capacity: 2kW, max. operating pressure: 29.5bar, refrigerant: R407c, weight: 80kg. Documentation available. An on-site inspection is possible. Guodpfow U T Upox Akajg

Condition: ready for operation (used), A Zinser plasma torch cutting system is available. Table dimensions X/Y: 2000mm/6000mm, plasma attachment: Hypertherm HPR260, extraction system: Donaldson, draw channel length: 10m. Including various spare parts for the burner head. The automatic gas console is defective. Documentation available. On-site inspection is possible. Gedpfx Ajvamq Dskaeug

Condition: new, Year of construction: 2026, The CNC plasma burner with a water table is a device designed for shape cutting of elements from a sheet of metal (in any shape). This machine is characterized by extreme simplicity and ease of use. Our CNC cutter guarantees repeatability and high cutting accuracy (0.1 mm), thanks to which burnt shapes can be transferred directly to the next stage of production. The water table ensures low consumption of consumables, raw materials and low gas emissions. No need to use fume and flue gas extraction. Why is it worth it? water table no need to use smoke and fumes extraction small size of the machine allows it to be placed anywhere THC voltage height adjuster precise setting of the torch a very precise cut requiring no further processing plate detection system convenient control panel intuitive machine operation can cut and gouge steel machine training at the buyer's/seller's premises a library of standard geometric shapes Characteristics and equipment Workspace 1500 x 3000 Y axis range 140 mm (clearance) The use of a rigid and stable structure Water Table Voltage height regulator Torch height adjustment system Torch height and stabilization sensor Gjdpfx Aog Nknyekaeug FastCAM program - in Polish with a license USB port and internal and external memory Friendly user interface - simple operation even for people who have never worked in programs like FastCAM Import of drawings in *.txt format from any type of program (e.g. AutoCAD, SolidWorks, etc.) MAKRO – a library of standard geometric shapes. This allows you to create figures without having to draw. NESTING – automatic arrangement of elements on the sheet DEMO - Shows the work cycle (path) without turning on the plasma or oxygen source The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Product characteristics The plasma burner or oxygen-gas CNC1 burner is a mobile device designed for cutting shapes out of a metal sheet. The machine does not require anchoring, thus reducing the assembly time considerably. Additionally, it enables for placing the machine in any location within the hall without any new expenses. The machine is equipped with an excellent quality wheel system that together with the low weight portal makes the plotter one of the fastest machines available on the market. The machine can be used for manual and automatic cutting. It is equipped with a digital controller that enables cutting out complicated shapes. The machine proves itself very well in the shipbuilding, machine-building and power industry. CNC1 has been equipped with a precise system of X/Y axes guides. The burner is controlled by Sino-USA electronic production system that is characterized by a high precision and elimination of the errors occurring during operation. The machine is very easy to configure. A manual configuration is possible for simple shapes and automatic configuration is possible for more complicated figures. The cutting pattern and the burner motion are shown on a display. An original FastCAM software is attached to the machine for easy configuration. The software is in English which makes the work easier. FastCAM is a technological CAD/CAM program, which is intended for designing and defining cutting paths of the elements cut out by CNC burning machines. The program shall be installed on an office PC or on a portable computer. After defining the way of cutting the operator receives a ready control code, which should be transferred to the control system of the machine. FastCAM program is a standard element of our machines. BASIC INFORMATION User-friendly interface – easy operation, even for people without prior experience of working with such programs as FastCAM Import of drawings in the *.txt format from any programs similar to e.g. AutoCAD, SolidWorks etc. MAKRO – a library containing standard shapes enables creating figures without the necessity of drawing them in CAD system. The program provides 2D figures NESTING – an optimal usage of sheet metal thanks to the automatic arrangement of elements on a sheet DEMO – shows a working path without having to turn on the plasma source or oxygen VOLTAGE HEIGHT CONTROLLER The machine is equipped with THC (a voltage control of the plasma burner blowtorch height). A precise control (+/- 0.1 mm) of the plasma blowtorch distance from a sheet metal during cutting. Higher accuracy and absence of defects which capacitive sensors and roller disks have. The parameters of the controller are collected automatically from the Automatic Cutting Parameters Selection table. Technical data Power supply 230 V LCD Guodpsvxhwvofx Akaeg 7" color Code format G-Code Working dimensions 1500×3000 mm Cutting speed 50–3000 mm/min Illustrations are preview only, the device is sold without the table. Manufacturer: Cormak

Year of construction: 2024, operating hours: 200 h, condition: new, functionality: fully functional, Dear Mr./Mrs., company Planit have opportunity to offer you new plasma nitriding equipment. Equipment is new, our production, cold wall equipment, used in 10 batches just to be tested. Characteristics of equipment: - Dimension of equipment: 1400x800x2000 - Chamber dimension: D500x600 - Maximum dimension of work piece: D400x500 - Equipment has own lifting device - Dimension of electrical cabinet: 860x600x2000 Godpfxovfdv Is Akasug - Power supply of equipment: 3x400V,50 Hz - Nominal power of equipment: 18 KW - Nominal power of plasma: 15KW, maximum current 38A, voltage 0-800 VDC - Pulse mode: 0-20kHz,unipolar,changable pulse and pause - Automatic control of arc - 3 gasses supply with MASS FLOW CONTROLLERS (technology of post oxidation) In addition to equipment, we also offer its installation, giving all technology (nitriding,post oxidation), technical documentation. Also, we are making equipment according to customer request.

Condition: ready for operation (used), Dimensions: Width: 180 mm Depth: 460 mm Gjdpfx Asxfk Dzjkaeug Height: 280 mm Year of manufacture: 2008 Cutting thickness: Quality cut 12 mm – Severance cut 14 mm

Condition: good (used), Year of construction: 2016, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, type of cooling: water, We are offering this well-maintained MicroStep MasterCut Compact 6001.20P plasma cutting machine, manufactured in 2016. Manufacturer: MicroStep Model: MasterCut Compact 6001.20P Working area: 6000x2000 mm Godpfozt Imisx Akaeug Year of manufacture: 2016 Condition: good Plasma source: Kjelberg Hi Focus 161 neo Cutting range: sheet metal thickness 1-30 mm The machine is in operation and can be inspected. The machine has been serviced annually by Microstep. Includes dust extraction system Donaltson Torit DCE. Machine available from September. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Brand: Grotius Control system: Linux CNC Working area: 3000 x 1500mm Length (mm): 4020mm Width (mm): 2330mm Guodpfx Aozupvujkajg Height (mm): 1570mm Description: Includes Thermal Dynamics A40i plasma source & various wear parts.