Plasma cutting machine

CMS 3 Plasma Wasp

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon Tsdpfjxwtu Tex Airjd

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Tedpfx Aeyq Rdyeirsd Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 Waterjet Cutting System for Sale For sale is a very well-maintained Flow Mach 200 waterjet cutting system, manufactured in 2021, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single and small series production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: Tsdpfjy Urziox Airsd – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive manual desliming system – EKOWA cutting water treatment – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Ready for immediate use Asking price: €105,000 net Inspection possible by appointment. Further pictures and information are available upon request.

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting system Perndorfer type WSS4020, table size 4000/2000 mm, high-pressure pump BFT Ecotron with 37 kW and 4000 bar cutting pressure, 3D cutting head for contour cutting. The machine is used and in good condition, and has recently undergone an overhaul by the manufacturer. The machine can be inspected and tested at any time. Tsdex H Ny Tjpfx Airod

Condition: used, Year of construction: 2007, operating hours: 15,000 h, functionality: fully functional, working range: 4,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, table length: 4,500 mm, table width: 2,000 mm, tank capacity: 8,000 l, pressure: 4,150 bar, operating pressure: 3,800 bar, input current: 84 A, power: 45 kW (61.18 HP), Waterjet cutting system CMS Tecnocut IDRA (predecessor to the Idroline series) 2 x 5-axis cutting heads (only 1 head is fully operational / head 2 is functional but lacks high-pressure/sand feed) Cutting head configuration as a 2D head with a 250 mm Z-axis travel range Cutting head configuration as a 3D head with a 150 mm Z-axis travel range, A-axis travel range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control, not 2.5D like many other machines Cutting area: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 250 / 150 mm Tjdpozbz Evjfx Airod A-axis: +/- 274 degrees B-axis: +/- 62 degrees Details: - 5-axis cutting head with IKC technology (intelligent cutting head control for angle error compensation) - Anti-collision/height sensor for surface scanning - DDX EasyStone Premium software - 60 HP/45 kW Jetpower EVO pump (3-cylinder) with an output of up to 5 L/min / Maximum pressure 4150 bar / Normal operating pressure 3800 bar The machine is still in operation and connected to power until July 31, 2026.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. Todpfx Aiji Hckrsrjd The machine can also be completely overhauled ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 26,646 h, functionality: fully functional, machine/vehicle number: 20360, Available for inspection in operation at our production facility. Waterjet cutting machine 6x3m, 1x2.5D cutting head, incl. HD pump 4000 bar, stainless steel cutting tank, abrasive remover. Purchase date 03-12-2013 Serial number 20360 Model Resato ACM 3060 Operating hours 26,646 hours (as of 24 October 2025) Tjdpfx Aioxu U Nmsred XY working range machine 3020 x 6020 mm Precision in X or Y axis +/-50 µm Maximum gap between bridge 210 mm +/- 10 mm Z-axis range -220 – 0 mm Maximum working pressure 4000 bar Minimum speed 1 mm/min Speed range 1 – 30,000 mm/min Maximum acceleration 500 mm/s2 (acceleration depends on cutting process) Ambient temperature 12 – 32°C Relative humidity 30 – 80% General protection class IP54 Specific protection class IP65 Voltage-frequency 1x 230 ± 5% VAC, 50-60Hz Electrical connections 1 x 16A + N + PE Operator panel 17’’ touchscreen, color Network/internet connection RJ45 socket Communication 100BaseT CAT5e Slat load capacity 1000 kg/m2 Floor load 5 N/mm2 Air connection Quick coupling, type Orion Air quality Dry and filtered air Dew point at 3°C at 7 bar Min 7 bar, max 12 bar 30 Nl/min Required floor flatness Max 15 mm deviation over 6 meters Typical sound pressure level 87 – 92 dB Special details The tank was originally plastic but has been modified to stainless steel Pump specifications (optional extra pump available as spare) PJ4-4000 – Resato Waterjet Centix ID: 601194 Model: Resato Powerjet 4000 Serial number: 18996 Purchase date: 26-11-2012 Max. capacity: 3.8 L/min Max. pressure: 4000 bar Max. power: 30 kW Number of intensifiers: 1 Low noise level:

Condition: excellent (used), Year of construction: 2014, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 5,000 mm, total length: 8,000 mm, total width: 4,700 mm, overall weight: 10,000 kg, working length: 5,000 mm, working width: 3,000 mm, We offer this Soitaab 3 x 5-meter cutting area waterjet cutting machine in excellent condition, featuring a bevel cutting function, manufactured in 2014. Todoz Ncz Dspfx Airsd High-pressure pump: Hypertherm Hypresicion 50, 37 kW. Manufacturer: Soitaab Model: Watertech 3050 Year of manufacture: 2014 Machine type: Waterjet cutting machine If you have any questions or require further information, please contact us via message or by phone.