Used Plasma for sale (455)

Condition: good (used), filter area: 180 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. PLYMOVENT MDB / AZUR Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. inlet diameter - 400 mm The fan has a power of 7.5 Kw. Capacity up to 9000 m3/h Lrsdpfju A Thlsx Akmsu Filtration area of 180 m2 Dimensions: height - 3.10m width - 2.80m depth - 1.25m fan: 1.00m x 1.00m

Condition: ready for operation (used), Year of construction: 2011, A CNC 10 axis pipe cutting system HGG including a plasma source Kjellberg HiFocus 280i is available. Pipe diameter range: 30mm-330mm, max. pipe load: 20kN, max. pipe length: 13000mm, max. workpiece weight: 2000kg, max. cutting angle: 70°, max. plasma cutting current: 280A. Documentation available. An on site inspection is possible. Lrodpfxeytgpds Akmou

Condition: used, Year of construction: 2015, functionality: fully functional, table length: 6,000 mm, positioning speed: 30 m/min, table width: 2,540 mm, working height: 1,092 mm, workpiece weight (max.): 5,000 kg, overall weight: 24,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO B254 - CNC PUNCHING, DRILLING & THERMAL CUTTING CENTER | YEAR 2015 The Ficep Tipo B254 is a CNC-controlled punching, drilling and thermal cutting center for the complete processing of steel plates and flat products in a single pass. Punching, drilling, countersinking, tapping, marking and thermal cutting via plasma and oxy-fuel are carried out on one machine without intermediate handling. CONDITION Used - technically sound. The machine is currently in productive operation and CAN BE INSPECTED UNDER POWER (by appointment). Handover as preferred: directly from ongoing production (cleaned and serviced) or - at additional cost - reconditioned by ASM. Details on the technical condition are disclosed individually upon serious interest. FUNCTION & APPLICATION The system combines three processing units in one CNC-controlled line: hydraulic punching unit (1000 kN), drilling head (20.1 kW) and thermal cutting unit with plasma torch (Hypertherm HPR 260) plus oxy-fuel torch. All processes run via the Mitrol CNC as automated machining cycles; the machine processes steel plates up to 2540 x 6000 mm. Typical applications: structural steel fabrication, structural engineering and prefabrication of gusset plates, end plates and connection plates. TECHNICAL DATA - Machine type: Automatic CNC punching and thermal cutting system for plates - Year: 2015 | Serial number: 34201 | Machine weight: 24,000 kg - Working height: approx. 1,090 mm | Max. positioning weight (plate): 5,000 kg - Max. plate size: 2540 x 6000 mm | Min. plate width: 508 mm - Punching force: 1000 kN | Stripping force: 100 kN | Punching tools: 8 - Max. punch diameter: 32 mm | Max. punching thickness: 20 mm - Drilling heads: 1 | Drilling tools per head: 8 - Max. drilling diameter: 40 mm | Max. drilling thickness: 100 mm - Spindle power: 20.1 kW | Max. spindle speed: 4000 rpm - Plasma torches: 1 | Oxy-fuel torches: 1 | Plasma source: Hypertherm HPR 260 - Max. plasma cutting thickness: 35 mm (pierce start) / 60 mm (edge start) - Max. longitudinal feed speed: 30 m/min Ljdpexn T H Dsfx Akmoru - CNC control: Mitrol CNC (master/slave), online remote diagnostics - Processes: punching, drilling, countersinking, tapping, milling, marking, scribing, oxy-fuel and plasma cutting Min. plate length, max. overall material thickness and cross positioning speed are confirmed during inspection. SCOPE OF DELIVERY - 1 x Ficep Tipo B254 plate processing center (year 2015) - 1 x Hydraulic punching unit 1000 kN with 8-position tool changer - 1 x Drilling unit 20.1 kW with 8-position tool changer - 1 x Plasma cutting torch | 1 x Oxy-fuel cutting torch - 1 x Hypertherm HPR 260 plasma cutting system - 1 x Marking unit (configuration to be confirmed during inspection) - 1 x Chip conveyor - 1 x Donaldson Torit dust extraction system | 1 x Punching tool set LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in Ficep structural steel machines. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing under power | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: ready for operation (used), Year of construction: 1996, filling capacity 400 Liter Usable Volume 300 Liter filling amount max. 850 kg workpiece sizes max. 850 x 200 mm Individual weight of workpiece max. 30 kg turning speeds 4.0 - 15.0 U/min Inner drum width 925 mm drive motor 380 V weight of the machine ca. 1950 kg. range L-W-H 3100 x 1600 x 2000 mm good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=xxnCddCmXe4 Description: - LIMA cleaning machines * for long concrete formwork parts, formwork clamps Lredpfx Akozcqziemsu * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode - space-saving thanks to compact design - extraction system built into the machine - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. . so that the drum flap can be opened quickly. - one work cycle takes about 20 minutes.

Condition: used, functionality: fully functional, type of input current: three-phase, filter area: 150 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, self-cleaning cartridge filter, pneumatic and vacuum-operated, suitable for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, which reduces explosion risk to a minimum. Brand: Plymovent / Euromate Lrodpjy H Hkvjfx Akmeu Model: SCS Cartridge filter elements – 2 pcs Filtration area: 150 m² Fan enclosed in a soundproof casing with noise silencer, power 7.5 kW. Fan model: CHB16LG03 Capacity up to 9,000 m³/h Inlet diameter: 400 mm Filtration efficiency: 99.8%

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 200 mm weight 1549 kg dimensions of the machine ca. 3000 x 1500 mm SIEGMUND Authorized Dealer - All Items in Stock! Lrjdpfxszvq Emj Akmju !! SPECIAL OFFER !! SIEGMUND Retro Welding Table 3000x1500x200, accessories included SIEGMUND welding table just like 25 years ago with plasma nitriding and modern table legs Product Description - Table dimensions: 3000x1500x200 mm - High-quality S355J2 N steel with plasma nitriding - Material thickness: approx. 24.5-27 mm - Hole diameter: 28 mm - Holes arranged in a 100x100 mm grid - Corners, edges, and holes chamfered at 45° - Side panel height: 200 mm - Holes in side panels arranged in a diagonal grid - Construction reinforced with ribs Plasma-nitrided version: - Protection against rust, scratches, and weld spatter adhesion - Corrosion-resistant / higher load-bearing capacity Specifications: - 28-hole pattern / Dimensions: 3000 x 1500 x 200 mm - Plasma-nitrided version - Includes 6x base feet (standard configuration) - Includes accessory set (see Figure 3): * 8x 280626.N * 12x 280511 * 6x 280410.N * 2x 280420.N * 2x 280422.N * 4x 280110.N * 2x 280152.N * 1x 283999

Condition: used, Year of construction: 2013, machine/vehicle number: 0602-260025, The MicroStep MasterCut Compact P 6001.20 is a compact and powerful CNC plasma cutting system designed for the precise processing of sheet metal on a work surface measuring up to 6,000 × 2,000 mm. The gantry-style system is equipped with a Kjellberg HiFocus 161i fine plasma torch, an automatic gas console, and Contour Cut Speed technology. Maximum positioning speed of 35,000 mm/min. Lredpfxezq E A Ao Akmsu

Condition: excellent (used), Waterjet Trumpf water cutting machine for sale: It has Trumpf mechanics and new electronics: new control panel with new ac servo motors; Mach 3 water jet control software; Working table dimensions: 2.5 m x 1.25 m. There is a possibility of adding the plasma cutting technique, so the machine could be used for both plasma cutting and water cutting. Lrodoyghfaepfx Akmou The machine can be tested in our company. We also have the option of selling waterjet pumps.

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 466 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes Lrjdpfxsxaable Akmeu - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided 750 version with scale - incl. 6x base equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm Ledpfexaab Ejx Akmjru weight 499 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures. The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - incl. 6x base equipment

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 100 mm weight 753 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding Ledpfxsxabc Dj Akmeru - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 8x basic equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 1069 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma nitrided Extreme 8.7 version with scale - Diagonal grid on the table surface - Diagonal grid on the side wall Lrjdpfjxabffex Akmju - Including 4x basic equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 4,00,02,000 mm, Equipment: cooling unit, Standard Features: • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste • Drive: Maintenance-free three-phase servo motors • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure setting • ControlLine capacitive height control and process control • Automatic focus adjustment with FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes • PlasmaLine plasma sensors • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld • Spray device for safe thick sheet processing • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin Lrjdpfsv Sm Ruex Akmju • RJ45 network connection via installation via teleservice • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Extended machine equipment: • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Condition: used, Year of construction: 2008, functionality: fully functional, input voltage: 400 V, volume flow: 3,600 m³/h, power: 5.5 kW (7.48 HP), Equipment: type plate available, Industrial filtration and dust collection system designed by Sideros Engineering for treating fumes and dust generated during thermal cutting, welding, or grinding processes. Collection and filtration of fumes from oxy-fuel cutting, plasma cutting, and laser cutting, as well as dust from welding and sanding. Lrsdpfxoz Hk N De Akmsu

Condition: like new (used), functionality: fully functional, overall weight: 130 kg, USED WELDER INVERTER MULTIPROCESS 520A, MIG/MAG-TIG-MMA, CEBORA KINGSTAR 520 TS. Lodpfx Aszxwy Njkmoru

Condition: new, table length 2400 mm table width 1200 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,64 t dimensions 2,4 x 1,2 x 0,9 m Lrjdpfxod Iinbe Akmsu Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !! Surcharge for 25mm material thickness: 340, -EUR

Condition: new, table length 1200 mm table width 1200 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,32 t dimensions 1,2 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Lrodpfx Akjd Iinfjmou Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 2400 mm table width 1200 mm Lodpfxsgarhns Akmsru table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,55 t dimensions 2,4 x 1,2 x 0,9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.

Condition: new, table length 2000 mm table width 1000 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,74 t dimensions 2,0 x 1,0 x 0,9 m Product description - High quality steel S355J2+N + plasma nitriding - Material thickness approx. 17 – 19 mm Ledpfjgazmcex Akmsru - Bore Ø 22 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Height of side panel 150 mm - Hole spacing in side cheeks 50 mm - Including scaling on the surface - Construction reinforced with ribs - Grid lines enable precise setups - Special equipment for welding tables is available on request.

Condition: new, table length 2400 mm table width 1200 mm table height 850 mm Vertikal stroke 50 mm Lsdpfx Akegazmgsmeru weight of the machine ca. 0,74 t dimensions 2,4 x 1,2 x 0,9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2+N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17 - 19.0 mm. The holes have a diameter of 22 mm. Hole arrangement in a 100 mm grid on the table top, Side panels 150mm with parallel hole arrangement in a 50mm grid. Incl. basic foot equipment. Table height 850mm Price plus packaging and transport. Other dimensions available. The accessories shown are not included in the scope of delivery. Optionally available.

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,26 t dimensions 1,2 x 0,8 x 0,85 m Special offer !!! Siegmund workstation incl. 2 drawers + tool set B high quality steel S355J2 + N, plasma nitrided and BAR-coated Boreholes Ø 22 mm, boreholes surface 100x100 mm grid Material thickness approx. 17 - 19 mm Consisting of: 1x 004002 (Siegmund Workstation) Lredpfxogazm De Akmju 1x 224004.P (perforated plate) 1x 224030 (clamp holder) 1x 004020 (shelf) 1x 224035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) 4x 220610.1 (clamp) 8x 220511 (double quick release bolts without groove) 6x 220410.N (stop) 2x 220110.N (angle) 1x 220852 (Allen key) 1x 004303 (vice)

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 800 mm, sheet thickness (max.): 120 mm, workpiece height (max.): 120 mm, grinding width: 800 mm, The grinding and deburring machine offers an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent processing by rounding the edges of the parts and removing burrs, resulting in a significantly improved surface quality. Using the latest technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. The user-friendliness combined with a robust design enables smooth integration into your production processes. Lrodoulauvjpfx Akmeu With our grinding and deburring machine, you not only optimize processing times, but also increase the precision and durability of your products. Benefit from high-quality processing and increase your production efficiency.

Condition: used, NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts and Bestspoke Control Parts. Machine Design and Construction. Having Expirienced Engineers and Designers Working on a Full Range of Work Shop Machinery, CNC, Plasma Cutters, Moulding Machines we Provide High End Quality and Competitive Lead Times. Usage: Butter and Various Viscous Pastes Construction: Fully Stainless steel and Glass Blasted to provide the finish on the metal and harden the surface. Shapes and sizes: Choose your own shpe and size Volumes: Depending on Model we can offer machines for 50g Up to 25Kg Blocks in Boxes. Hopper volumes on extruders: 18 Litres and 50Litres Control panel: Butter Working Switch, Butter Extruding Switch, Start/Stop and Lsdpfx Akeurulpjmjru Safety: Machine is Equiped with Stainless Steel Cover that Brings The Machine To a Stop If This is Opened. Cutting: Cutting Wires come down manualy and bring the machine to a Stop Out feed: Out Feed Conveyor is Built with Stainless Steel Rollers that help the Prodcut Slide Out Avoiding any Sticking and Changing The Prodcut Shape. Electricity: This Machine can work on Single Phase 220v /50hz , 3Phase 400v / 50hz and US Electrics on 60hz. Choose on Order. Lead time: 5weeks Warranty: 12 months Spare parts: Dairy Machinery UK Finance Available: Pay Monthly, Ask For A Quote

Condition: used, Compact device for automated nucleic acid purification The Perkin Elmer Chemagic 360 is an automated benchtop system for the isolation of nucleic acids (DNA and RNA) from a variety of sample materials. It uses Chemagen's magnetic bead technology to obtain highly pure nucleic acids for various downstream applications. With dimensions of only 80 x 80 cm and its unique sample volume flexibility, the Chemagic 360 is an innovative instrument that can be adapted to almost all of your nucleic acid purification requirements. By using the proven M-PVA magnetic bead technology, the Chemagic 360 delivers high yields of highly pure nucleic acids, which are suitable for a variety of downstream applications such as NGS, MLPA, genotyping, and PCR. Features at a glance: • Optimized design to prevent cross-contamination • Sample volume from 10 µl - 10 ml • Throughput of 96 to 4000 samples per day • Compact design • Ultra-fast protocols for DNA purification available Lrodoyk Uy Sepfx Akmou • Flexible reagent dispensing to keep operating costs low • User-friendly interface enables easy and quick installation • Easy integration into liquid handling platforms The advantages at a glance: • DNA isolation directly from human whole blood or plasma samples: No pretreatment of the primary samples is required before extraction • "Ready-to-use" DNA with high yield and purity • Fast process times: 96 samples in less than 60 minutes • Long DNA fragments: up to 200 kb, suitable for NGS • High recovery rates • Autonomous system for downstream assays Specifications: Manufacturer: Perkin Elmer Type: Chemagic 360 Throughput: approximately 96 samples per run Sample capacity: 12, 24 and 96 Volume: 10 microliters to 10 ml Extraction heads (Chemagic rod heads): 96 Number of samples: 1 – 96 Sample volumes: 10 µl to 400 µl Tube plates: 96-well plates Extensive kit portfolio – whole blood, saliva, serum/plasma, etc. No cross-contamination Revolutionary, compact benchtop design LCD monitor, keyboard, mouse Power supply: 100–240 V~ (AC), 50/60 Hz Size/Dimensions: 800 x 800 x 900 mm Weight: 140 kg Year of manufacture: 2024 Video link Chemagic 360 You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Perkin Elmer Chemagic 360-D Nucleic Acid Extraction System The Perkin Elmer Chemagic 360-D is an automated benchtop system for the isolation of nucleic acids (DNA and RNA) from a variety of sample materials. It uses Chemagen's magnetic bead technology to obtain highly pure nucleic acids for various downstream applications. Key features and specifications Technology: The system is based on Chemagen's patented M-PVA magnetic bead technology. Metal rods are magnetized to collect the beads with the bound nucleic acids and transfer them between different process solutions, thereby minimizing cross-contamination. Sample volume flexibility: It offers various "rod heads" (magnetic rod heads) for different volume ranges and throughputs: 12-rod head: For sample volumes from 1 ml to 10 ml. 24-rod head: For sample volumes from 200 µl to 4 ml. 96-rod head: For sample volumes from 10 µl to 400 µl. Applications: The isolated nucleic acids are suitable for a variety of applications, including next-generation sequencing (NGS), genotyping, PCR, and MLPA. Software: The intuitive Chemagic software enables easy setup of protocols, tracking of process status (run time, remaining time), and generation of LIMS-compatible log files for quality assurance. Ledeyk Upmjpfx Akmeru Accessories: An optional Chemagic Dispenser 360 is available to quickly and accurately pre-fill reagents, thereby reducing manual processing time. Dimensions: The device measures 800 x 800 x 900 mm (W/D/H). Certification: The 360-D version is a CE-IVD-registered and FDA-listed instrument intended for in-vitro diagnostics (in combination with the appropriate kits). The advantages at a glance • DNA isolation directly from human whole blood or plasma samples: No pre-treatment of the primary samples is required before extraction. • “Ready-to-use” DNA with high yield and purity • Fast process times: 96 samples in less than 60 minutes • Long DNA fragments: up to 200 kb, suitable for NGS • High recovery rates • Autonomous system for downstream assays Specifications: Manufacturer: Perkin Elmer Type: Chemagic 360-D Throughput: approximately 96 samples per run Sample capacity: 12, 24, and 96 Volume: 10 microliters to 10 ml Extraction heads (Chemagic rod heads): 96 Number of samples: 1 – 96 Sample volumes: 10 µl to 400 µl Tube plates: 96-well plates Extensive kit portfolio – whole blood, saliva, serum/plasma, etc. No cross-contamination Revolutionary compact benchtop design Computer workstation with Chemagic software LCD monitor, keyboard, mouse Power supply: 100–240 V~ (AC), 50/60 Hz Size/Dimensions: Width: 900 mm (1500 mm with attached display and open door) Depth: 820 mm (1000 mm with open door) Height: 900 mm Weight: 140 kg Year of manufacture: 2024 Video link Chemagic 360-D You can find more items – new and used – in our shop! International shipping costs on request!