Used Plasma Bevel for sale (988)

Condition: good (used), Year of construction: 2010, functionality: fully functional, working range: 3,500 mm, sheet thickness (max.): 250 mm, sheet thickness steel (max.): 250 mm, input voltage: 230 V, cutting speed: 12,000 mm/min, Equipment: documentation/manual, Koike Maxigraph 3500 cutting machine with Burny Phantom control. This machine is suitable for oxy-fuel and plasma cutting. The machine is used but in good condition. Machine can be seen in operation. Year of manufacture: 2010 Please note, this offer includes only: - Gantry - Control unit - X, Y, and P motors - Lifter and Koike THC height control - Cables and hoses Pjdpjyc Ecnsfx Afhepl Excluding: - Cutting table - Extractor/filter - Hypertherm 260 plasma source - Warranty For questions, please email us. If you have any questions or require more information, feel free to send us a message or call us.

Condition: ready for operation (used), Used bevel gear lapping machine Manufacturer: Oerlikon Ppsdpfx Afoycc Riohel Model: SL 2 The machine is available for immediate collection.

Condition: ready for operation (used), Year of construction: 2019, Main Drive Number of axis 3 Pjdpfjx Enlfsx Afhjpl This 3-axis ACCURL CPL 2040 plasma cutting machine was manufactured in 2019. It features a cutting width of 2000 mm and a length of 4000 mm. It utilizes a Hypertherm Powermax 125 source, capable of cutting mild steel up to 36 mm, stainless steel up to 20 mm, and aluminum up to 18 mm. Consider the opportunity to buy this ACCURL CPL 2040 plasma cutting machine. Contact us for more information. Application Types Cutting

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 23005, table length: 4,750 mm, table width: 2,000 mm, Equipment: documentation/manual, Offered is a SPIRO® Cutlass plasma cutting system combined with a Hypertherm Powermax unit. The system includes a PC with HVAC CamDuct software (the 2009 version is no longer supported). The Sideros filter unit is also included. Pedowc Nm Espfx Afhopl

Condition: used, Year of construction: 1998, max. wheel diameter 1000 mm gear width 152 mm total power requirement 75 kW weight of the machine ca. 29,5 t Max. diameter. Gear: 1,000 mm Dimensions: 5.5 x 5.3 x 3.2 m Weight: 29.5 tons Control: CNC (FANUC Series 150M) Max. wheel diameter 1,000 mm Max. day with single timing 1,000 mm Ppodpfx Afoyan N Ejhjl Face milling Max. module 17 Control FANUC Series 150 M Number of teeth 5 - 300 FACE WIDTH 152 mm X-axis -305 Y-axis -305 / +305 mm Z-axis -25 / +711 mm B-axis -5 / 90 degrees

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 245, type of input current: three-phase, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, working width: 2,000 mm, working length: 6,000 mm, color: red, Equipment: documentation/manual, lighting, For sale: an excellent plasma gas-oxygen cutting machine from a renowned brand with 8000W power. STIGAL DYNAMIC SPEED, Cebora 165. Manufactured in 2012, 400V supply voltage. Serial number 245. The cutting machine is in continuous operation and regularly serviced. Fully operational! Technical specifications of the STIGAL DYNAMIC SPEED plasma cutter: working area (L x W): 6000 x 2000 mm, positioning accuracy: +/- 0.05 mm, travel speed: 22 m/min, maximum power consumption: 8000 W. Viewing is welcome. Pjdpfx Aex S E Nzjfhjpl

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 4100 mm Measurements depth 10169 mm Machine weight 5500 kg Ppedpfox D Ey Iox Afhjl Control Unit Brand MicroStep Model IMSNC Main Drive Number of axis 3 This 3-axis MicroStep PLS 7501.25PG plasma cutting machine was manufactured in 2008. It features a robust MicroStep MSNC500 control system and dual cutting capabilities with a HPR 260 AGC plasma and an acetylene gas burner. The machine offers a maximum cutting thickness of 50 mm and operates efficiently within a large working field. If you are looking to get high-quality cutting capabilities, consider the MicroStep PLS 7501.25PG machine we have for sale. Contact us for more information. Application Types Cutting

Condition: good (used), overall weight: 2,400 kg, OXIPLASMA Kompak EKO 3100x1600mm Plasma Cutting Table Brand: OXIPLASMA Model: Kompak EKO 316 Manufactured: 2018 (Installed at client for operation in 2021) Description: Useful cutting capacities: 3,100x1,600mm Travel speed: 30 m/min Positioning accuracy: +/- 0.1 mm Motorization: Brushless servos (4 interpolated servo motors (x, y1, y2, z)) Double guidance and traction system Height control managed by the CNC Anti-collision detector with inductive electromechanical impact control Suction table sectioned by zones using the CNC Hypertherm EDGE CONNECT CNC 19" touchscreen Useful head lift: 120 mm Weight: 2,400 kg Cutting capacity: Carbon steel: 32 mm Stainless steel: 20 mm Includes: - Hypertherm HPR 130 XD high-definition plasma equipment - Hypertherm gas console - ROLLAIR RLR 700 screw air compressor, 7.5 HP, year 2007, 10 Bar 5,402 hours Psdpfswlruksx Afhjpl - BEKO DryPoint RA air dryer

Condition: ready for operation (used), Year of construction: 2020, This GEPELEKTRO Phantom CNC was manufactured in 2020. It features a large working area with table dimensions of 12,000 × 3,000 mm and is equipped with a Lincoln Electric Burny Phantom II controller. It can handle flame cutting up to 300 mm steel and plasma cutting up to 50 mm steel. The machine includes a complete extraction system and Messer OmniWin 2019 software. Contact us for more information about this machine. Application Types Pedpfx Afsx E Edfshjpl Cutting

Condition: ready for operation (used), Year of construction: 2017, General Data Machine weight 9000 kg Measurements height 2300 mm Measurements depth 4300 mm Movement X-Axis Movement 3000 mm Y-Axis Movement 1200 mm Main Drive Number of axis 3 Ppjdpfjx D It Rex Afhel Dimensions Machine Length 15000 mm This 3-axis Hypertherm PL-YPE 3100 was manufactured in 2017 and features a Hypertherm® HyPerformance HPR 400XD gas plasma source. It offers precise cutting with a maximum capacity of 50 mm in mild steel, 75 mm in stainless steel, and 45 mm in aluminum. The effective cutting area is 3000 mm by 1200 mm. If you are looking to get high-quality cutting capabilities, consider the Hypertherm PL-YPE 3100 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2015, This KOIKE PNC-12 EXTREME plasma cutting machine was manufactured in 2015. It features a robust CNC control system and an effective cutting area of 1500 x 3000 mm. Capable of handling a maximum cutting thickness of 50 mm and equipped with rapid travel speeds up to 4000 mm/min, it ensures efficient operation. Consider the opportunity to buy this KOIKE PNC-12 EXTREME plasma cutting machine. Contact us for more information about this machine. Pjdpex D Nhvjfx Afhjpl Application Types Cutting

Condition: new, Year of construction: 2024, CNC plasma/gas cutting machine PCO-3015-AG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1200.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access Pjdpjh E Sgtjfx Afhjpl - LibreCad - 12 month access

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-2010-DG The machine was engineered and manufactured in Poland. Pjdpfx Afsthi Amehjpl Working parameters: - XY operating range (working area): 1020 x 2100 mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total mass: 900.0 kg - Maximum load: 1120.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-6020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100 mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2700.0 kg - Maximum load: 7000.0 kg - Adjustable support legs: 10 pcs Ppodpfx Aoh E Izfsfhol Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, CNC plasma/gas cutting machine PCO-3020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: Ppodjh E Izbspfx Afhjl - Length: 3650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1550.0 kg - Maximum load: 2800.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-3015-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1100.0 kg - Maximum load: 1800.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Ppsdpfx Aoh E Izisfhsl Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-2512-d The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1270 x 2600mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3150 mm - Width: 2030 mm - Height: 1500 mm - Total mass: 950.0 kg - Maximum load: 1250.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Pedoh E Iy Eopfx Afhopl Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-6020-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100 mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2600.0 kg - Maximum load: 5000.0 kg - Adjustable support legs: 10 pcs Systems THC – Torch Height Controller – The integrated cutting height control system automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the programme information about the angle of the material in relation to the table. Assistance by a specialist We are committed to staying in continuous contact with our Customers; therefore, we meet this challenge by offering a package of hours to be used for the Otinus Professional Assistance within every machine purchased. Otinus Academy This is a constantly growing e-learning platform created for Otinus brand Clients. By purchasing this machine you will gain a year access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Supplied with machine Installation of the machine and training in the use of the machine at our Clients' sites. - 1 day, up to 8 hours - installation of the machine and learning to use the controller. Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses Podpfeh E Iyzox Afhepl - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-2010-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1020 x 2100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: Pjdpfxsh E Iyte Afhopl - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total mass: 800.0 kg - Maximum load: 800.0 kg - Adjustable support legs: 4 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-2512-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1270 x 2600mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3150 mm - Width: 2030 mm - Height: 1500 mm - Total mass: 1050.0 kg - Maximum load: 1750.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. Podpjrp A Ukefx Afhopl THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-3020-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1450.0 kg - Maximum load: 2000.0 kg - Adjustable support legs: 6 pcs Ppsdpsrp Dcrefx Afhsl Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCV-3015-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1200.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 6 pcs Podpferp Dmbox Afhspl Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Aventa PLUS 4 x 2, type of input current: DC, working range: 4,00,02,000 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, cutting current: 300 A, Equipment: documentation/manual, Macchina in operazione Podpfxsw Al Rme Afhjpl

Condition: ready for operation (used), Year of construction: 2013, This MGM Omnicut 3100 was manufactured in 2013. A robust plasma cutting machine, it features a 12-meter table and a powerful Kjellberg HiFocus 360i plasma source. It efficiently handles mild steel up to 80 mm, stainless steel up to 80 mm, and aluminum up to 100 mm. If you are looking to get high-quality cutting capabilities, consider the MGM Omnicut 3100 machine we have for sale. Contact us for more information. Ppodpox D Npasfx Afhjl Application Types Cutting

Condition: ready for operation (used), Year of construction: 2011, This MicroStep EasyCut 6001.25PrGB was manufactured in 2011. It is a CNC plasma/oxyfuel cutting machine designed for industrial, heavy-duty applications. Features include a large working area of 6000 × 2500 mm, dual-side driven gantry, and compatibility with CAM software like mCAM and AsperWin. It supports up to 6 oxyfuel torches and offers options like automatic height control. Note: the gas console is defective. Contact us for more information about this machine. Ppedpox D Hz Hsfx Afhjl Application Types Cutting