Used Plasma Welding Machine for sale (66,667)

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and tested Rated voltage 400V Rated power 60 kVA at 50% duty cycle Short-circuit current 22 kA Welding current 17.6 kA Fuse rating 125A Outreach 420 mm Electrode force 470 daN Cylinder with pre-stroke Total stroke 80 mm Double stroke 60 mm Electrode cone MK2 Lower console, height-adjustable by approx. 300 mm Welding control TE 180 with digital display of welding current, current rise, etc. Main switch on the control cabinet - new 2-stage foot switch according to UVV regulations - all pneumatic and water hoses renewed Iiedpjh N Sd Uofx Acfef - electrode holder new - original documentation / operating manual available - machine inspection with confirmation 07/2026 - weight approx. 330 kg Demonstration and inspection by appointment only, Commissioning and training at the customer's site possible for an extra charge The machine is located in Dresden, near the A17 motorway. And we always have a suitable cooling unit in stock – of course, for an extra charge ;-)

Year of construction: 2023, condition: used, voltage 400 V 50 Hz V current intensivity 100 A output 36 kw compressed air 4,5 bar Iodpfxszbvn Ee Acfoif weight 3.200 kg In our assessment, the laser welding system is in like-new condition. Technical features: - Welding of pressed-in components in the cooling plate - 3000W fiber laser - Pneumatic suction of the cooling plate including rotary device - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2016, operating hours: 2,170 h, functionality: fully functional, input voltage: 400 V, total width: 3,880 mm, total length: 3,100 mm, input current: 160 A, Equipment: documentation/manual, MGM Omnicut Star 3100 CNC plasma cutting system Manufacturer: MGM Model: Omnicut Star 3100 Year of manufacture: 2016 Operating hours: approx. 2,100 h For sale is a well-maintained MGM Omnicut Star 3100 CNC plasma cutting system from 2016 with only approximately 2,100 operating hours. The machine is in good technical condition and is ready for immediate use. Equipment: CNC plasma cutting system MGM Omnicut Star 3100 Year of manufacture 2016 Approx. 2,100 operating hours Plasma source: Kjellberg HiFocus 161i neo Additional oxy-fuel torch for economical oxy-fuel cutting Precise machining of steel, stainless steel and aluminum Robust machine construction for industrial use The combination of the powerful Kjellberg HiFocus 161i neo and the oxy-fuel torch enables both highly precise plasma cuts and the economical cutting of larger material thicknesses. Note regarding the sale: We offer this machine on behalf of a client and act solely as an intermediary. The sale is made directly by the machine's owner. We will gladly facilitate contact and assist you with the entire process. An inspection of the machine is possible at any time by prior appointment. We will gladly provide further technical data, images and information on the equipment upon request. We look forward to your inquiry. Iijdjzpwcfepfx Acfjf

Condition: refurbished (used), Bag Machine , retrofit , 680mm working whidth. Iiodoxf Txhepfx Acfef

Condition: used, total length: 28,000 mm, For sale: MGM OMNICUT PGV3 CNC plasma and gas cutting machine. The machine is used, fully functional, and operational. It can be inspected and tested on-site. Iiedpfx Acozd Td Ijfef These CNC thermal cutting machines are manufactured by the Czech company MGM Tábor and are designed for plasma and gas cutting of metal sheets. The MGM OmniCut series is designed for professional, heavy-duty, and continuous operation, making it ideal for the production of large metal structures. Technical specifications: Manufacturer: MGM Tábor Model: OMNICUT PGV3 CNC control Plasma cutting Gas cutting Working table length: approx. 28,000 mm Working table width: approx. 3,000 mm Cutting thickness: Plasma: from 0.5 mm to 150 mm (depending on the plasma source) Gas cutting: up to 300 mm Heavy-duty portal construction Designed for continuous operation in industry Advantages: Large working area Plasma and gas cutting capability in one machine Suitable for cutting thick and large-format metal sheets CNC control ensures precise and repeatable cutting Reliable industrial construction The machine is connected and in use Can be seen in operation in production Application: Ideal for the production of metal structures, shipbuilding, energy, heavy industry, agricultural machinery, bridges, tanks, and other large metal products. If you have any further questions, we will be happy to answer them.

Year of construction: 2003, condition: ready for operation (used), A fully enclosed Soyer CNC coordinate stud welding system is available. Travel X/Y: 750mm/750mm, table dimensions X/Y: 1240mm/1000mm, max. table load: 100kg, positioning accuracy: +/-0.2mm, positioning speed: 24m/min, welding heads: 2, welding head type: Soyer SK-5AP, vibratory feeder: Soyer UVR-300, welding unit type: MBS-10N, stud size range: M3-M8. Machine dimensions X/Y/Z: approx. 1500mm/2050mm/1700mm, weight: approx. 1000kg, control: PC, operating hours: approx. 20000h. Including two welding units, two universal vibratory feeders, stud holders, plungers, ground clamps and feed hoses. Documentation available. An on-site inspection is possible. Isdpfxezqfwme Acfeif

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. Iiedjzqucfspfx Acfjf The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Condition: used, 50 units of Fronius TPS 450 welding machines, used 🧰 Product features • Manufacturer: Fronius • Model: TPS 450 • Condition: used, see photos • Color: red • Mains voltage: 380 V / 400 V / 415 V • Apparent power: 17.2 kVA • Efficiency: 90% • Welding current range: 3 - 450 A • Working voltage: 20 - 38 V • Open-circuit voltage: 50 - 80 V • Insulation class: F • Protection class: IP 23 • Cooling method: AF • Welding processes: MIG/MAG, MMA, WIG/TIG 💰 Price per unit: €1500 net, excluding VAT • Quantity discounts: available upon request • Shipping costs: available upon request, Europe-wide • Delivery time: immediately available • Inspection and collection: possible at any time by appointment We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty shelving, used & new Description: Are you looking for high-quality warehouse shelving to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving immediately available • 20,000 m² of storage platforms & steel platform structures immediately available • Weekly 30–50 semi-trailer loads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty shelving, high-bay racking, shelving with shelves, tire racks, or shelving for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty shelving Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) Iiodoyn Ii Iopfx Acfjf • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including thorough cleaning. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and thorough cleaning. Whether you became aware of us through heavy-duty shelving or are looking for galvanized heavy-duty shelving / heavy-duty shelving systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), Water-cooled, pneumatically operated rocker-arm spot welding machine Manufacturer: DALEX, Type: SL 25-1 Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 22.4 kA Secondary open-circuit voltage: 1.8 - 5.2 V Electrode force: 278 daN Arm spacing: 140 or 300 mm Arm extension: 180-500 mm Iedpfx Aexvh Hbscfoif with mounting control cabinet according to VDE 0100 with main switch Synchronous welding timer MPS 15033

Year of construction: 1999, condition: excellent (used), Spot welding machine NIMAK PMP 5/35 + water cooling unit Year of construction approx. 1980 Power at 50% ED 35 kVA Projection 250 - 450 mm Working stroke 40 mm Electrode force 100 - 460 kp infinitely adjustable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Iiodpfx Acjium Nisfof Insertion electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of the electrode holder 200 mm Connected load 83 KVA Mains connection 380 volts, 50 Hz - 4-time control - stepless power adjustment - Single points and series points - parallel electrode guidance - Water-cooled (without cooling unit) - electric foot switch Weight 300kg

Condition: used, Year of construction: 2019, CNC gantry plasma cutting machine Manufacturer: Microstep Type: MG 4501.20 BkP Year of manufacture: 2019 Iiedpfxsyay H Ae Acfef CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source, including Optimix gas console 1 x Drilling spindle, 26 kW, up to 40 mm diameter, including 8-position tool changer 1 x Preparation for retrofitting a rotator (for bevel cuts) 1 x Nesting program on the CNC control ä22726

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 3,000 mm, type of cooling: water, welding current (max.): 420 A, ESAB Power Mig LAW 420W – Water-cooled MIG/MAG Refurbished, serviced, tested and ready for immediate use Ijdpfx Acezqywusfjif 3-month warranty Specifications: 420 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller drive Burnbacktime adjustable End current Including: 4-metre welding torch, ground cable with clamp, gas hose, and 1-metre interconnecting cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Equipment: type plate available, Built in 1994, modernized by the machine manufacturer KUKA in 2012. The system features a facing unit, a flanging die, and a tube conveying unit for unloading the welded components. We can adapt this system to meet customer requirements. A complete retrofit is also possible. The machine is assembled and can be demonstrated. Isdpfx Aex I Efbecfoif We can also manufacture your friction welding joints for you, up to a clamping force of 300 tons. Feel free to contact us!

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, year of last overhaul: 2011, Equipment: CE marking, documentation/manual, Friction welding machine from the manufacturer MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315, - Rexroth hydraulics - German user interface - CE marking Upon request, this machine can also be converted for many other welding tasks. Iisdpfxsv Uzf Ee Acfsf We can also produce your friction welding joints, up to 300 tons of clamping force. Please contact us for further information!

Condition: used, Year of construction: 2020, CNC gantry plasma cutting machine Iiedpfx Acox Dlwmsfjf with skew rotator beveling unit Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 10.8 m Track width: 4,000 mm 1 oxy-fuel torch ALFA 1 plasma torch with skew rotator beveling unit Power source: Hypertherm XPR300 Cutting thickness: 50 mm piercing 80 mm cutting Beuting extraction table without filter system Software: Omniwin with Bevel ä22726

Condition: good (used), Year of construction: 2007, shaft length: 1,064 mm, Internal article number: 26037 Laser welding machine Rofin Starweld 90 Year of manufacture: 2007 YAG laser Power: 4.5 kW Laser power: 90 W Iijdpfx Acoy D Nlqofef Pulse peak power: 5.5 kW Pulse duration: 0.3 - 20 ms Wavelength: 1064 mm Dimensions (L x W x H): 100 x 50 x 100 cm Measured without table and stand Weight: approx. 170 kg Unfortunately, I cannot put the system into operation because it needs to be connected to a water circuit with deionized water. Furthermore, an error message is displayed indicating that the fiber optic cables need to be checked.

Condition: like new (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 3,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Unused Lascentrum MIG/TIG 200 ACDC Synergic MIG & TIG ACDC for steel, stainless steel and aluminium. Ideally suited for use at home, on site, for general welding work, light steel/stainless steel/aluminium construction, and in the workshop. 5-200 AMP 230 Volt Synergic ACDC TIG Pulse 2/4 Step Gas pre flow / Gas post flow Start current / End current Up slope / Down slope Pulse Time / Pulse Frequency AC Balance / AC Frequency adjustable AC Wave adjustable Spot welding Fixed programs / Program memory Elektrode option Including: SB150 Welding torch 3 Meter SR17 Tig Welding torch Earth cable 3 Meter 35mm² Elektrode cable Gas hose Manual (If in the original packaging) Original Packaging 3 Months Warranty of Cjays The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test Welding is possible in our Workshop in Valkenswaard Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. Iedjzqc U Aepfx Acfeif We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), functionality: fully functional, total height: 450 mm, total width: 240 mm, total length: 670 mm, input voltage: 400 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 4,000 mm, welding current at 60% duty cycle: 250 A, welding current at 100% duty cycle: 200 A, welding current (min.): 15 A, welding current (max.): 300 A, Unused Lascentrum MIG 300 DP-3 Synergic Double Pulse MIG/MAG for steel, stainless steel and aluminium. Ideally suited for on-site work, general welding, medium-duty steel/stainless steel/aluminium structural work, and in the workshop. 15-300 AMP 400 Volt Synergic Puls / Double Pulse 2/4 Step / 4 Roller Drive Fixed Programs / Program Memory Stick Option Including: SB250 3 Meter Welding Torch Earth Cable 3 Meter 35mm² Electrode Cable Gas hose Manual (If available in the Packaging) Original packaging 3 Months Warranty The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test welding is available at our workshop in Valkenswaard. Iijdpezqc Aasfx Acfsf Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, working range: 3,000 mm, sheet thickness (max.): 10 mm, table length: 3,000 mm, working width: 1,500 mm, Carbonini plasma cutting machine, model Entry, with a working area of 3000x1500 mm. Complete with two Thermal Dynamics current generators. Work performed: - Replacement of the work surface - Replacement of the sliding guides - Management software for handling sheet metal parts Iiodpfszdrz Ssx Acfsf Thermal Dynamics CUTMASTER 151 plasma cutter, maximum cutting capacity of 100 Amps, 30 mm. Thermal Dynamics CUTMASTER 51 plasma cutter, maximum cutting capacity of 40 Amps, 12 mm.

Condition: used, Year of construction: 2017, functionality: fully functional, controller manufacturer: ECS, controller model: SERIE 900, control type: NC control, TABLE DIMENSIONS: 2500 mm x 1250 mm C.N. E.C.S. series 900 GENERATOR: CEBORA PLASMA PROF166 Isdpfx Aexc Ibrecfoif

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, type of cooling: water, hose package length: 15,000 mm, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 400 A, welding current (min.): 20 A, welding current (max.): 500 A, Esab Origo Mig 502cw – Water-cooled MIG/MAG Refurbished, serviced, tested and ready for immediate use 3-month warranty Specifications: 20-500 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller Drive Burnbacktime adjustable End current Elektrode option Including: 4 Meter Welding Torch, earth cable with clamp, gas cable, and 15 metre interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties. Ijdpfx Acszp Dznofeif

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, URBAN AKS 6410/4 four-head welding machine, from right to left, maximum welding dimensions: 2,700 × 2,500 mm, Windows control system, weld bead limit of 0.2 mm for coloured profiles, previously operated on a single shift, technically refurbished and fully functional. Ijdpfx Acoznwq Tefeif

Year of construction: 2006, condition: used, Submerged arc welding device, welding accessories, forming gas welding device, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding machine, welding carriage, inert gas welding device, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding device, rail runner -Submerged arc welding machine without: power source -Submerged arc welding machine type: Minisaf 02 -Control box SUBARC 3 Iedpfx Acsd Nlf Nsfsif -Intermediate hose package -Equipment -Dimensions: 1200/800/H500 mm -Weight: 215 kg

Condition: used, Spot welder, spot welding machine, spot welding machine, spot welding tongs, spot welding machine, projection welding machine, projection welding machine Iisdpfehx E T Ujx Acfof -Manufacturer: Aro, projection welding machine, spot welding machine, water-cooled, type N601 -Welding power: 65 kVA -Welding control: Aro 25-002-2 -Transport dimensions: 1000/510/H1720 mm -Weight: 538 kg

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Esab, PULS MIG/MAG welding machine Ijdpfey Ulzisx Acfoif -Type: AristoMig 500W -Max. welding power: 500 A -Features: Water-cooled -Wire feeder case: 4-roller drive Esab type AristoFeed 48-4 -Quantity: 3x Esab, PULS MIG/MAG welding machine available -Price: per piece -Dimensions: 1200/700/H1730 mm -Weight: 210 kg