Used Plaster Worm for sale (368)

Condition: new, Year of construction: 2025, functionality: fully functional, nominal power: 5 kW (6.80 HP), 5 kW 7.5 HP Cutting height 200 mm Tiltable up to 60° to the left, up to 30° to the right using a hand crank from the front Cutting height when tilted at 45°: 140 mm Cutting width 420 mm; cutting width when swiveled at 45°: 290 mm Swivable up to 60° to the left, up to 45° to the right Incl. saw blade for wood 6,000 mm heavy-duty crosscut roller conveyor, mounted on the left, stop-slider adjustable from the machine with handwheel, pneumatically lockable, length digitally readable, digital display in 230V version 4,000 mm heavy-duty infeed roller conveyor, mounted on the right Machine tiltable on both sides from the front using hand crank and worm gear Casdpfedxw U Isx Addsa Various options available on request, e.g. greater cutting height, material clamping, laser cutting guide

Condition: like new (used), Automatic grinder 160 mm Completely made of special stainless steel Working worm and feeding worm Holeplate diameter: 160 mm Hopper capacity approx. 360 liters Cutting set consisting of: 2 knives, 1 kidney plate, plates with hole diameters 4 and 13 mm Machine dimensions in cm: Width: 125,0 Depth: 230,0 Cedpfx Adsumlmgsdsaa Height: 210,0 Installed power: 37,5 kW Voltage: 400 V, 50 Hz

Condition: used, - Adhesive application with 1 profiled roller for Packaging height 300mm over 1 application roller - The drive via worm gear motor 0.37 kW - 1 ST left - 1 ST right - Fits DIMTER HK 200 and HK 400 spare parts dimter in stock Cedpfx Adjcht Nysdjaa equipment in stock accessories in stock

Condition: good (used), Peter Wolters AC500 lapping machine TECHNICAL DATA AND SCOPE OF SUPPLY TECHNICAL DATA Rolling device size: 42 TS 7/14 Working disk diameter: 415 mm Ring width: 54 mm Working disk thickness: 50 mm Possible wear of the disks to approx.: 20 mm Number of rotor disks: 14 Drive data: 380 V / 50 Hz Upper disk drive: 1.0 / 1.4 kW Worm gear motor: 56 / 112 rpm Lower disk drive: 1.0 / 1.4 kW Worm gear motor: 500 / 100 rpm Workpiece drive: 0.5 / 0.7 / 0.9 kW 3-pole worm gear motor: 6 / 18 / 36 rpm Tilt arm drive: 0.25 kW Digital load adjustment of the upper work disk: 0-250 daN Connection data Electrical connection: 5.0 kW Compressed air connection: 5-7 bar Compressed air consumption: Approx. 8 Nl/min OFFER SCOPE U.A: (list not exhaustive): Cajdpfx Aotxitvsddoa Peter Wolters AC 500 lapping machine / fine grinding machine 1 inverter per motor documentation Exact scope of offer according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: as good as new (ex-display), centre height 130 mm spindle bore 18 mm Csdpfx Aouvd Axoddjaa ratio 40:1 swivellable - 10° bis 90° ° groove width 16 / 18 mm weight 35 kg dimensions of the machine ca. 0,5 x 0,25 x 0,25 m Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2024, Packaging machine with belt conveyor plus screw feeder. Weighing is done by means of a scale placed in the belt conveyor. The powder filling packaging machine is mainly used in coffee powder, flour, yeast powder, sugar, salt, veterinary drugs, premixes, plaster powder, additives,milk powder, starch, seasonings, enzyme preparations,fodder and other powder- like quantitative packing. Power Supply: AC380V 50-60HZ Power: 900W Packaging Accuracy: ± 1% Packing Specification: 5g-1000g Caodovfppaopfx Addoa Packing speed :500-700 bottles per hour for one nozzle Total weight: 260kg Machine Dimension: 2000 × 650 × 2000 (mm)

Condition: used, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 Caedpjxn Itrofx Addsa 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. WARNING! THE MACHINE IS RETURNED, SERVICED, NO PACKAGING.

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 0816, Compact high-precision CNC rotary indexing table with controller, suitable for single-part or small-batch production in mechanical engineering. Can be mounted in horizontal or vertical orientation. Available for immediate delivery – Made in Germany – Caodpfobatamox Addsa This indexer is particularly well-suited as a 4th axis on engraving and milling machines, for milling, engraving, laser marking, drilling, slotting, or for use on tool or surface grinding machines. Suitable for square, hexagonal, and gear cutting of any pitch, as well as 3D machining tasks. Highly precise and accurate—features a worm gear set with a special 100:1 reduction ratio, custom-designed by us and not standard on the market. Output torque: well over 70 Nm. Maximum clamping diameter: 250 mm. Center height: 125 mm. Drive is provided via a controlled stepper motor with 200 steps, 7.5 A current, and a holding torque of 9.7 Nm. Achievable output division accuracy: 0.00028125 degrees with 1/64 microstepping. The worm gear set is quadruple ball-bearing mounted and backlash-free, also adjustable. Bearings are from FAG/SKF. The one-piece, robust spindle comes with a 200 mm faceplate, internal taper MK 3, and a through bore of 20.3 mm. Weight: 26 kg. Accessories: - Optional USB data cable for programming - Optional purge air connection - Optional 200 mm three-jaw chuck - Optional guard plate with integrated proximity switch for automatic operation Quick production of flats, complex graduated scales, cross bores, or gearwheels. The electronic controller is a compact module with 14 travel programs and 2 reference runs as well as step monitoring with power supply included in the package. The toolbox module is made of metal. Optimized pre-programming in incremental division angles of 360, 180, 120, 90, 72, 60, 45, 30, 10, 5, 1, 0.02, and 0 degrees. Repeat cycles, clockwise/counterclockwise operation, and cycle pauses are, of course, fully programmable. With the supplied software, you can program travel operations and cycles, as well as absolute or incremental positions. The current value can be conveniently displayed in the software at any time. Via an output, the unit can exclusively receive start impulses from an NC machine. Flats, challenging graduated scales, cross bores, or gearwheels can be produced quickly. Standard clamping devices are available for your applications, and custom fixtures can be manufactured quickly and economically on request. Custom rotary table solutions are also available upon inquiry. Supplied with warranty, German operating manual, and after-sales support since 2006. 1,500 Roundinho rotary tables in use worldwide –

Condition: refurbished (used), Refurbished Landert motor Cjdpsw Rn Hxjfx Addjaa Manufacturer: Landert Motoren AG Bülach Type 132S-RFA4A, 1450/1750 rpm, 400V, 50/60 Hz, 5.5 kW (Grinding worm drive) All technical data subject to errors and omissions. Price on request Sale exclusively within EU countries.

Condition: used, Miter left 60° + right 45° Hydropneumatic control of the saw unit Caedpfxjxfr Nlo Addja Electropneumatic material feed unit Smooth-running, high-performance worm drive with a large gear ratio, integrated into a robust cast housing for optimal cutting results Clamping fixture with double clamping arm for burr-minimized cuts, additionally featuring a lateral quick-shift for miter changes Precision prism guide for the gearbox head, laterally adjustable Especially stable base frame with integrated automatic cooling and large chip drawer CNC control: By entering various parameters such as quantity and material length, the CNC version is the ideal solution to optimize workflows.

Condition: used, Rotary Table WMW Type D 315 k Serial No.: 10930 Caodpjxf Uytsfx Addsa Table diameter: 315 mm Table height: 135 mm Transmission ratio: 90 : 1 - Hand crank with index plate and lever - Scale ring for reading at the hand crank - Readable degree scale on the rotary table - Swivelling worm for direct indexing - Clamping via clamping lever - 14 mm T-slots in the table plate - Built-in index plate 23-28-33-42-51-61 Weight: 85 kg

Condition: good (used), Bushing, motor flange/worm connection, sleeve, connecting sleeve -Socket: for motor flange/worm connection -Type: Shaft Ø 60 mm Cajdpfx Aswzr I Aeddsa -Quantity: 1x sleeve available -Price: per piece -Dimensions total: Ø 120 x 220 mm -Weight: 13.4 kg/piece

Year of construction: 2025, condition: new, functionality: fully functional, For over 30 years, we have been manufacturing concrete power trowels, now available in 11 different models. We offer both 230V mains-powered and battery-operated versions (battery and charger included), with single-speed and dual-speed options. PLEASE SEND INQUIRIES BY EMAIL FOR FASTEST RESPONSE. Lightweight Power Trowel for Resin and Concrete, Equipped with American NAC Drive System. Dual-speed gearbox (2-stage) with stepless electronic speed control. First gear: 180–400 rpm. Second gear: 300–700 rpm. Power: 1800W. Compatible with 48 cm discs, 50 cm cross-member with floating blades and convex discs for concrete finishing in Heide Parks (we manufacture these discs), as well as bush hammering, polishing, and brush cleaning plates. Features: Wide handle adjustment range, LED work light, status indicators, safety switch, and small finishing disc included. Highly convenient for concrete finishing in hard-to-access areas, balconies, small rooms, and on vibrating tables. Net prices: Csdpswvhu Uofx Addjaa • Lightweight battery-powered trowel (Vander), dual-speed + electronic speed regulation (Vander) – 3,350.00 PLN (EUR 798) • Lightweight single-speed battery-powered trowel, stepless speed regulation – 2,900.00 PLN (EUR 690) • Handheld, dual-speed battery-powered trowel (Vander) + electronic speed control – 1,450.00 PLN (EUR 345) • Handheld, single-speed battery-powered trowel, stepless speed control, complete set – 920.00 PLN (EUR 219) • NAC lightweight dual-speed power trowel + electronic speed control, small disc included – 3,350.00 PLN (EUR 798) • Handheld Hikoki trowel, 2 speeds (150–650 rpm) + electronic speed regulation, 1200W, small disc – 1,100 PLN (EUR 262) • Handheld Hikoki trowel, 2 speeds (150–650 rpm) + electronic speed regulation, 1600W, small disc – 1,250 PLN (EUR 298) • Handheld NAC (USA) trowel, 2 speeds (180–400; 300–700 rpm) + electronic speed regulation, 1800W, small disc – 1,250 PLN (EUR 298) • Single-speed handheld trowel, small disc – 790.00 PLN (EUR 188) • Single-speed handheld trowel with small disc, 0–970 rpm, 2800W – 830.00 PLN (EUR 198) • Handheld vibro-trowel for concrete and plaster. VIBRATING. 20x28 cm vibrating plate. Power: 370W/2840 vibrations – 750 PLN (EUR 179) TROWEL DISCS: • Convex 38–42 cm, for Heide Parks – 200 PLN (EUR 48) • 400/2.5 mm stainless steel disc – 230 PLN (EUR 55) • 400/3 mm disc with rounded edge – 220 PLN (EUR 53) • 47 cm/3 mm disc with rounded edge – 230.00 PLN (EUR 55) • 47 cm/3 mm stainless steel disc – 260 PLN (EUR 62) • 60 cm chrome-plated stainless steel disc (2.5 mm) – 310.00 PLN (EUR 74) • 60 cm/3 mm disc (no edge) – 250.00 PLN (EUR 60) • '600' disc with velcro (for attaching sandpaper or polishing pads) – 350.00 PLN (EUR 83) • 40–50 cm disc, no edge – 150.00 PLN (EUR 36) MOUNTING HEADS: • Mounting head Ø160 mm, stainless steel for diamond, brush, or bush hammer attachments. Fits angle grinders, lightweight, and handheld trowels – 350.00 PLN (EUR 83) • Mounting head Ø215 mm, stainless steel for 6 diamonds, brushes, or bush hammer attachments. Fits angle grinders, lightweight, and handheld trowels – 400.00 PLN (EUR 95) CROSS-BEAM: • 6-arm cross-beam, 3 mounting holes (50 cm) – 360.00 PLN (EUR 86) BLADES / PLASTIC PARTS: • 3-hole sheet or plastic blades, 0.5 mm – 26.00 PLN (EUR 6) • 3-hole sheet or plastic blades, 1.0 or 1.5 mm – 28.00 PLN (EUR 7) BUSH HAMMERING: • Complete stainless steel, double-row bush hammer head – 160 PLN (EUR 38) Contact us by email with any questions. We operate 24/7

Condition: new, Year of construction: 2025, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Cajdpfxsudi Uno Addoa Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 24 i IKZ chip worm spindle mount Sk 40 Cajdsudb I Topfx Addoa

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Complete in standard design with: - Sturdy, torsion-free steel frame, of welded and bolted construction - PRESS BEAMS LATERALLY with continuous pressure surface and 25 mm thick, coated bearing plate Casdpfx Adjwx Nfgodja - Counter-pressure surfaces (lateral pressure wall, base) are 25 mm thick, coated, continuous bearing plates - Electric adjustment of the press beam via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance lead nuts with grease reservoir - Pressing is performed electromechanically using a worm gear motor (0.75 kW) - The pressing force of the press beam is continuously adjustable electronically by potentiometer and regulated by a frequency inverter, offering absolutely wear-free pressure force control - Pressing force for the vertical press beam min. 300 daN (kg) to infinitely variable max. 2200 daN (kg) - Press and adjustment speed of the press beams with fine positioning, via 3-position selector switch 5 / 10 / 25 mm/second - Extremely simple operation via two separate push buttons; two movement cycles (open/close) selectable via control - Freely adjustable pressing time pre-selection with automatic opening, 0–30 min. (switchable to seconds or hours) - Working height/loading height 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400V, 3Ph, 50Hz (1.6 kVA, 16 A)

Condition: good (used), Year of construction: 2022, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, Machine hours ON 10,500 Spindle hours 4,400 Hermle C 400 U, Year of manufacture 2022, Control Heidenhain TNC 640, Travel X/Y/Z 850/700/500 mm, 2-axis NC swivel rotary table Ø 650 mm, Tool changer with 38 positions, Additional magazine with 88 positions - can be extended as required, C axis with worm drive, A axis single-sided drive, Spindle speed up to 18,000 rpm, HSK A 63, Electronic thermal compensation, Cedpow Igf Iefx Addsaa Electronic handwheel, ICS 40 bar, conveyor belt filtration system, Measuring scales with purge air, Scraper conveyor, Manual cabin door, Manual cabin roof, Blum laser for tool breakage / tool measurement, Heidenhain 3D probe, Oil mist extraction, DNC system, Dynamic Efficiency, Dynamic Precision, OCM - Optimized Contour Milling, 1 set of new polycarbonate viewing panels incl. seals,

Condition: new, Continuous drilling capacity in E 335: 18 mm Normal drilling capacity: 20 mm Tapping capacity: M 12 Spindle: MK 2 Drilling depth: 100 mm throat depth: 225 mm Cjdpfx Adecw H Sysdeaa Speed range A: 100 - 2,000 min-1 Speed range B: 200 - 4,000 min-1 Spindle/table distance: 60 to 440 mm Table surface: 345 x 372 mm Column diameter: 90 mm Total height: 955 mm Weight: 110 kg Frequency-controlled three-phase motor: 1.5 kW Powerful, precise universal drill with a wide range of applications. Table/height adjustment via gear rack and worm gear. Three-phase motor, reversing switch right/left rotation, digital speed display, speed adjustment via potentiometer. UNIMAX 2 T with height adjustment from the front. Mains connection 230 V.

Year of construction: 2025, condition: new, Handheld trowels for finishing concrete floors are practical tools designed for smoothing concrete in hard-to-reach areas. We manufacture two versions – single-speed and two-speed. Available in 230V corded and battery-powered models. Also ideal for terrazzo grinding on stairs. We have been manufacturing trowels for over 25 years. Currently, we produce 11 types of trowels – both 230V electric and battery-powered variants. Having completed thousands of square meters of flooring ourselves, we understand the needs of flooring contractors and know what can make their tough job easier. We value user feedback and implement changes promptly. For inquiries, we recommend contacting us via e-mail. Our manufacturing utilizes the Kaizen methodology. Kaizen, meaning “change for the better” (in Japanese: “kai” – change, “zen” – for the better), is a philosophy and management method that emphasizes continuous improvement of company processes and activities. It involves systematic introduction of small but regular changes, leading to gradual yet lasting improvements. As a result, our products are durable and user-friendly. Casdpfx Adswt Ix Iedsa Our trowels can be used with disks for smoothing concrete, blade crosses with metal or plastic blades for finishing, diamond or corundum abrasives for grinding, bush hammering, cleaning old concrete with brushes, and even restoring surfaces to a like-new condition. They are also suitable for grinding terrazzo stairs and floors. Additionally, we manufacture special universal plates, to which many of our tools can be attached. Products are shipped cash-on-delivery or upon prepayment, or can be collected in Poznań. Our trowel disks are made exclusively from 3 mm premium-grade black or stainless steel. Net Prices: Two-speed handheld battery-powered trowel (Vander) + electronic speed control – 1450.00 PLN Handheld battery-powered trowel with continuous speed regulation, complete set – 920.00 PLN NAC trowel, lightweight, two speeds + electronic gear shift, includes small disk – 3350.00 PLN Handheld trowel Hikoki, 2 speeds (150–650 rpm) + electronic speed adjustment, 1200W, includes small disk – 1100 PLN Handheld trowel Hikoki, 2 speeds (150–650 rpm) + electronic speed adjustment, 1600W, includes small disk – 1250 PLN Handheld trowel NAC (USA), 2 speeds (180–400; 300–700 rpm) + electronic speed adjustment, 1800W, includes small disk – 1250 PLN Single-speed handheld trowel with small disk – 790.00 PLN Single-speed handheld trowel with small disk, 0–970 rpm, 2800W – 830.00 PLN Handheld vibrating trowel for concrete and plaster. Vibrating plate 20x28 cm. Power 370W/2840 vibrations – 750 PLN Lightweight handheld battery-powered trowel (Vander), two speeds + electronic speed adjustment (Vander) – 3350.00 PLN Lightweight single-speed battery-powered trowel with continuous speed regulation – 2900.00 PLN.

Condition: new, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle Codjvuf S Njpfx Addoaa 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.

Condition: new, Stepless pillar drilling machine for versatile applications. Equipped with digital speed display as standard. Drilling table adjustable via toothed rack and swivels around the column. Motor protection switch, star grip. Picture shows SB 25 S Technical data: Drilling capacity: 30 mm spindle: MK 3 drilling depth: 130 mm throat depth: 250 mm spindle speed, infinitely variable: 230 - 2700 rpm table size: 460 x 360 mm column diameter: 100 mm dimensions, approx. (WxDxH): 600 x 810 x 1780 mm motor power: 1,5 kW Mains connection: 400 V Weight, approx.: 230 kg Equipment: - Stepless speed adjustment with digital display - right / left rotation - T-slot stones - 24 V electrics - Height adjustable spindle protection device with micro limit switch - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivels around column - Reversing switch for R/L-run (option) Scope of delivery: - Machine light - emergency stop pushbutton - full motor protection - star grip - CE Codsp Duagspfx Addoaa

Year of construction: 2025, condition: new, 1. Electric Power trowel 1.1 kW/230V (220V), non-extendable handle, LED lamp, safety switch, „600” disc included, free wheels – 3899 PLN =EUR 917,40 2 – elestric power trowel ZDJ60E 1.1 kW, galvanized, disc with extended and removable handle included, rectangular guard – PLN 4012 =EUR 944 3 – electric power trowel ZDJ60E 1.1 kW with round cover, non-foldable handle, galvanized, disc included – PLN 4125 (additionally powder coated, PLN 136 more expensive) =EUR 970,59 Cedpewt H Tdsfx Addoaa 4 – elestric power trowel ZDJ60E 1.1 kW with round sliding cover, removable handle – PLN 4125 =EUR 770,59 5 – electric power trowel ZDJ60E 1.5 kW, disc included (33 kg without disc) – PLN 4238 (additional, second LED lamp on the engine + PLN 113) =EUR 977,18 6 – electric power trowel ZDJ60E 1.5 kW, with round cover, disc included – PLN 4351 (additionally powder coated, PLN 136 more expensive) =EUR 1023,77 7 – 1.1 kW power trowel for prefabricated elements (27 kg/31 kg) with disc – PLN 4238 =EUR 997,18 8 – Concrete trowel for prefabricated elements with disc, weight 35 kg – PLN 4,159 =EUR 978.59 9 – NAC trowel, lightweight, two speeds + electronic speed change, small disc included – PLN 3786 =EUR 890,82 10 – Hikoki hand power trowel, 2 speeds (150-650 rpm) + electronic speed change, 1200 W, with small disc – PLN 1243 =EUR 292,47 11 – Hikoki hand power trowel, 2 speeds (150-650 rpm) + electronic speed change, 1600 W, with small disc – PLN 1413 =EUR 332,47 12 – NAC hand power trowel (USA), 2 speeds (180-400; 300-700 rpm) + electronic speed change, 1800 W, with small disc – PLN 1413 = EUR 332,47 13 – Single-speed hand power trowel with small disc – PLN 893 =EUR 210,12 14 – Single-speed hand power trowel with small disc, 0-970 rpm, 2800 W – PLN 938 =EUR 220,71 15 – Hand trowel for concrete and plaster. VIBRATORY. Vibrating plate 20X28 cm. Power 370 W/vibr. 2840 – 848 PLN =EUR 199,53 SMOOTHING DISCS – convex 38-42 cm, for HeideParks – PLN 226 =EUR 53.43 smoothing disc 47 cm/3 mm with rounded edge – PLN 260 =EUR 61,15 smoothing disc 47 cm/3 mm, stainless steel – PLN 294 =EUR 69,13 smoothing disc 60 cm made of stainless steel chrome (2.5 mm) – PLN 350 =EUR 82,42 60 cm smoothing disc made of 3 mm sheet metal (and without a rim) – PLN 283 =EUR 66,47 „600” disc with Velcro (for attaching sandpaper or polishing discs) – PLN 396 =EUR 93,06 Smoothing disc 40 – 50 cm, without rim or with rim – PLN 170 =EUR 39,88 65 cm/3 mm smoothing disc as above (flat, rounded edge) – PLN 328 =EUR 77,11 70/3 disc (with or without crown) hooks or screws) – PLN 316 =EUR 74,45 Smoothing disc 75 cm with hooks or screws – PLN 339 =EUR 79,76 80 cm floating disc with hooks or screws – PLN 373 =EUR 87,74 90 cm floating disc universal (right/left) – PLN 429 =EUR 101,04 as above but white (from chrome sheet) – PLN 746 =EUR 175,48 As above, but single-sided – PLN 215 =EUR 50,52 As above, but double-sided made of stainless steel (for single) – PLN 260 =EUR 61,15 As above, but double-sided for „900” self-propelled – PLN 283 =EUR 66,47 UNIVERSAL DISC for fastening segments – 400×5 made of stainless steel – PLN 542 =EUR 127,72 universal disc for fastening segments – 500×5 made of stainless steel – PLN 520 universal disc „600” made of carpet (for polishing) – PLN 25, thicker – PLN 40.00 That is why we provide a 5-year warranty for all our concrete trowels type ZDJ60E from 1.08.2017

Condition: new, REMS Orkan 2050. electric construction fan for commercial use. For ventilation of rooms, intermediate spaces, shafts, cavities and for ventilation and wind cooling of machines, marquees, event halls. To support air exchange in damp, musty cellars. Especially for accelerating the drying of e.g. concrete, masonry, plaster, screed. Condenser motor 230V, 50Hz, 145W, for continuous operation. Very quiet operation. Air volume 1740/2050m³/h. In sturdy plastic housing. In cardboard box. Casdpstty Nnofx Addoa Air volume: 2050 m³/g Motor: 230 V, 50 Hz, 145 W

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 1200 W, with automatic hot gas defrosting system, for continuous operation. Very quiet operation. Dehumidification capacity max. 80 l/24 h, air volume max. 850 m3/h. Electronic control unit with illuminated 3"" display and memory function. Electronic hygrostat, operating hours counter, power consumption counter. Air filter. In a sturdy sheet steel housing on a mobile tubular steel frame with large wheels. In cardboard box. Condensate container not included (see accessories below!) Dehumidification capacity: ≤ 80l/24h Air volume: ≤ 850 m³/h Super offer: Csdpfxeuy Thmj Addoaa When you buy a REMS Secco 80 set, you will receive 1 REMS Detect W humidity measuring device free of charge. You save an additional 233.55 euros. The offer is valid until 31.12.2024

Condition: new, REMS Orkan 1360 electric construction fan for commercial use. For ventilation of rooms, intermediate spaces, shafts, cavities and for ventilation and wind cooling of machines, marquees, event halls. To support the exchange of air in damp, musty cellars, to support the drying of e.g. concrete, masonry, plaster, screed and for filling e.g. inflatables, hot air balloons. Capacitor motor 230V, 50Hz, 145W, for continuous operation. Very quiet operation. Air volume 1360m³/h. In sturdy plastic housing. In cardboard box. Casdjuyg Utspfx Addea Air volume: 1360 m³/h Power: 145 W