Used Plaster Worm for sale (333)

Year of construction: 2013, operating hours: 1,000 h, condition: ready for operation (used), This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information. Additional equipment • 2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer • 2x ground temperature sensor with sword probe Machine Benefits Qualitative Machine Benefits • 13x anchoring for one fixing point installation tool Lhodpfx Abjx D Ewmscod • Pair of worms, compact version, made of highly tempered steel and bimetal design • Counter-rotating twin-screw extruder, gearbox with integrated back pressure bearing for 350 bar • Recirculating oil lubrication with oil pressure and oil temperature monitoring • Barrel Ø 115-30 d with atmospheric and vacuum degassing openings • Heating and air cooling divided into 5 zones, total output of 56400 w • Vacuum unit for bt 115 including 2x vacuum unit and vacuum suction unit • Complete screw temperature control including cassette installation • Mains supply with main switch and load disconnector for heating, drives, and auxiliary voltages Technical Machine Benefits • Stationary for an extrusion height of 1000 mm • Complete control cabinet with all necessary control and regulation equipment attached • Microprocessor-controlled multi-channel controller for two and three-point zones • Adaptive and self-optimizing control behavior • Fault messages with collective alarm and storage • Siemens mp377 touch panel for setpoint specification and actual value display • Recipe management of up to 20 recipes • Drive with one ac motor, vector-controlled • Digital drive controller for ac motors, with full digital technology • Motor temperature monitoring with pre-warning and shutdown Extra Information Machine still under power

Year of construction: 2021, condition: ready for operation (used), total height: 1,300 mm, product length (max.): 4,500 mm, Pipe Production Line manufactured in 2021. This Bazhou Wanxin machine features a dual-station decoiler, hydraulic shear and butt-welding machine, and a cold saw for precise cutting of pipes. It accommodates round pipes with diameters from Ø16-63.5 mm and offers a feeding speed of up to 120 m/min. Consider the opportunity to buy this Bazhou Wanxin Pipe Production Line. Contact us for further details. • Dual-station decoiler • Function: Passively unwinds the coil • Construction: Dual-station with 180° rotation; manual expansion • Advantage: Fast loading, simple operation • Hydraulic shear and butt-welding machine • Function: Cuts front/rear strip ends, centers, and re-welds • Construction: Manual hydraulic shear with boom; front/rear pressure rollers; front/rear centering rollers; welding device • Cutting method: Hydraulic shear • Pressing method: Double-cylinder press • Welding method: Manual welding • Coil accumulator • Function: Ensures continuous production during strip changeover Ljdpeyhfvljfx Abcshd • Construction: Frame type with movable and fixed frames (incl. feeding device) • Feeding speed: max 120 m/min • Storage speed: max 200 m/min • Stored strip length: 200–400 m • Pinching roller motor: AC 11 kW • Forming and calibration machine • Working height: +850 mm • Main drive power: AC/DC motor 160 kW, 1000–2000 rpm; reducer: gear-hardened; gearbox: spiral bevel gear • Entry/formation: Passive 5-roll straightener; vertical rolls for strip feeding; forming via 7 horizontal + 8 vertical roll stands • Guiding/pressing/deburring/cooling/calibration: 6 horizontal + 5 vertical roll stands; 1 round calibration stand • Round calibration stand: 1 smoothing device; 2 sides with 8 rolls (4 per side); Ø30 mm rolls, 40Cr, quenched/tempered/hardened • Horizontal roller shaft: Ø60 mm, bearing position 55, material 40Cr; surface hardening HRC 50–55 • Vertical roller shaft: Ø40 mm, material 40Cr, quenched/tempered/hardened • Bearing slider: Forged steel 45# • Stand style: Gantry type; opening width 120 mm; horizontal stand clamping adjustable via worm gear • Stands material: Welded, aging annealed • Pinching roller shaft: Ø50 mm, 2 rollers, manual screw adjustment • Guide shaft: Ø40 mm • Deburring knife: 2 pcs (1 in use, 1 spare) • Cooling tank: Included • Cold saw (Type KK-5-50) • Function: Cuts pipes to preset length at line speed • Pipe diameter: Round Ø16–63.5 mm (and corresponding square/rectangular) • Cutting length: 1–6 m • Material thickness: 0.6–2.5 mm • Saw motor: 11 kW AC with frequency inverter • Feeding motor: 2.9 kW servo (Yaskawa) • Drive motor: 11 kW servo (Yaskawa) • Feeding mode: Servo multi-stage speed • Speed following: max 110 m/min • Clamping: Pneumatic • Saw blade: Ø400 mm • Saw reducer: Model KK-80 • Sawing stroke (rack length): 3 mNote • The technical data and descriptions are transcribed from the original order confirmation and are for informational purposes only; they are not binding. Additional equipment • Conveyor track, table, and packing machine • Function: Automatic pipe transfer from mill to table; packages into hexagonal bundles • Roller track length: 16 m • Drive: 1 motor YCT200-4A, 5.5 kW

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,150 kg, This Behringer PSU 450H was manufactured in 2019. It features a robust gear and worm gearbox driven by a 3-phase, 4.0/4.8 HP motor, ensuring durability and efficient operation. The user-friendly control panel includes handwheel controls for material stop and clamping pressure. Its hydraulic system is powered by a 2.4 HP motor with a 6.6-gallon pump. Additional features include a coolant system and a weight of 1150 kg. Contact us for more information about this machine. • Drive system: Gear-and-worm gearbox, oil-lubricated, with 3-phase pole-changing main motor 4.0/4.8 HP • Blade speed: 46/92 SFM • Control panel: User-friendly interface; handwheel for material stop; vertical and horizontal clamping pressure control Lhedpfx Absx D Iqpjced • Hydraulic system: Fully hydraulic, infinitely variable blade feed; 2.4 HP motor with 6.6-gallon pump • Clamping: Vertical and horizontal clamping device • Material handling: Adjustable material stop • Coolant: Integrated coolant system

Year of construction: 1993, condition: ready for operation (used), This Hollinger MSE-II-EP-SB-300-450 was manufactured in 1993. It is part of a comprehensive line that includes various welding and cutting machines, enhancing versatility and productivity in operations. Ideal for those looking to get high-quality welding capabilities, consider the Hollinger MSE-II-EP-SB-300-450 machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Comprehensive set of welding and cutting machines, compressors, handling, and assembly equipment. • Includes a range of machine types such as cutting machines, milling machines, saws, compressors, and various handling and assembly equipment. • Ideal for large-scale manufacturing operations due to the variety and capacity of equipment. • The equipment list includes machines built between 1989 and 2014. Extra Information Includes diverse equipment such as plasterers, drills, screwdrivers, extractors, tables, sorting carts, shelving, and cabinets, enhancing flexibility and operational capability. Lhjdpfjx Nr Ncsx Abced

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, control type: manual, total height: 1,900 mm, total length: 1,950 mm, total width: 750 mm, overall weight: 230 kg, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Metal Band Saw BS 260G Lhjdpjyr Ndhjfx Abcjd Technical Data Built-in coolant system: Yes Blade size [mm]: 2455 × 27 × 0.9 Blade tension: Mechanical (manual) Blade speeds [m/min]: 36, 72 Feed speed [m/min]: 0–50 (stepless feed) Arm descent adjustment: Stepless – hydraulic cylinder Vice base height [mm]: 1010 Power supply: 3-phase 400 V Motor power [kW]: 1.1 Dimensions [mm]: 1950 × 750 × 1900 Weight [kg]: 230 Warranty: 24 months Manual (DTR): Polish language CE declaration: Yes Product Description The horizontal metal band saw with a swivel arm allows cutting perpendicular to the axis of the workpiece as well as at any angle in the range 0°–60°. The material can be fed manually or using any mechanical feeding device, while the cutting feed of the blade is fully automatic. The blade guides are equipped with special carbide plates and bearings, which significantly improve blade guidance, durability, straightness, cutting accuracy, and overall cutting quality. The rigid saw arm is made of profiled cast iron, ensuring high stability and vibration reduction during cutting. A control panel is mounted on the machine frame for easy operation. The drive from the electric motor to the blade drive wheel is transmitted through a worm gear transmission. The cutting blade is tensioned on two cast-iron wheels using a manual tensioning system and guided in adjustable rolling and sliding carbide guides. Inside the machine there is a separate coolant tank with an electric pump, which improves blade life and cutting performance. The cutting speed (arm descent speed) is controlled by a hydraulic cylinder, while the feed rate is adjusted directly from the control panel. The machine offers two blade speeds: 36 and 72 m/min. When the arm reaches its lowest position after cutting, the blade drive automatically stops. Safety is ensured by: protective blade covers micro-switches stopping the motor when the cutting cycle is completed or a guard is opened an automatic shutdown system in case of blade breakage Applications MTP BS260G band saws are professional machines designed for cutting: steel profiles solid bars and shafts They are equipped with a hydraulic cylinder, coolant system, and swivel arm up to 60°. When combined with high-quality blades from the German manufacturer Roentgen, the machine ensures high cutting precision, quality, and efficiency. The band saw is suitable for cutting: carbon steel alloy steel structural steel stainless steel acid-resistant steel Delivery to the customer is possible. Shipping costs are calculated individually by the transport company.

Condition: excellent (used), Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Condition: Gear motor is unused -Manufacturer: SEW-Eurodrive, gear motor with brake, parallel shaft gear unit series F -Type: FH87/G DRS132S4BE5HF/TF -Speed: 68 rpm -Power: 5.5 kW -Protection class: IP54 Lhodpfx Absvvbnpecsd -Hollow shaft: Ø 60 x 280 mm -Brake: 28 Nm -Number: 2x motor available -Price: per piece -Dimensions: 760/335/H530 mm -Weight: 155 kg/piece

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm Diameter of the table 1500 mm max. module 22 Control 840D turning speeds 3,5 U/min table load capacity 20000 KG Distance of shafts 70...1220 mm Ledpfx Abjx R U Hmscehd Stroke length 30...330 mm no. of strokes 10...200 Hub/min total power requirement 138 kW weight of the machine ca. 38 t dimensions of the machine ca. 11x5 m machine: Full CNC machine with electronic rolling coupling for C- and D-axes and digital INDRAMAT drive technology. Stiff machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wraparound, longitudinal guide with roller recirculating shoes. Ground preloaded ball screw with play-free preloaded nut. Digital AC drive technology with play-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically play-free preloaded double worm gear, part wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic compensation of the workpiece weight. Table hole with a diameter of 500 mm through and open at the bottom. Water-cooled digital AC servo motors. The machine is to be installed on a foundation. Machine stand: as a highly rigid cast construction for axial travel of 1200 mm. Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and wraparound with roller recirculating shoes. Ground ball screw with play-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shapping head: SK 4.1 with hydraulic NC servo drive for impact spindle movement and cutting wheel lifting, stroke length 330 mm, impact spindle diameter 160 mm. Hydrostatically supported impact spindle, linear guide and lateral guide for the lifting mechanism. Maximum tool diameter 300 mm. Drive motor power 30 kW. Stroke rates from 10 - 200 DH/min, stroke speed from 5 - 45 m/min. Impact spindle speed for working and return stroke independently programmable. In the cutting area, the spindle speed remains constant. Maximum cutting wheel speed 10 rpm, digital AC drive technology. Cutting wheel lifting correction for internal and external gearing manually reversible. Lateral offset of the impact spindle axis up to 50 mm from the machine center to prevent return stroke collision of the cutting wheel, manually adjustable.

Condition: ready for operation (used), Year of construction: 1985, A thread and worm grinding machine Reishauer AG is available. Grinding length: 450mm, clamping length: 700mm, max. grinding diameter: 200mm, max. pitch: 80mm, max. workpiece weight: 100g, max. lead angle: +/-25°, grinding wheel diameter: 275mm/350mm, speed: 1850rpm. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1600mm, weight: approx. 3400kg. Including oil centrifuge, hood, oil mist extraction and various accessories. The splash curtain is slightly hardened. Documentation available. An on site inspection is possible. Lhjdpfx Ajx Dm Dnsbcod

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, TECHNICAL CHARACTERISTICS: Press Model: T130R CE Serial number: 11911 Year of construction: 2004 Nominal force: 1300 kN Nominal stroke: 7.5 mm Adjustable stroke: 16÷200 mm Stop position: TDC Ram adjustment: 100 mm Stop time: 190 ms Strokes per minute min./max.: 10/55 Ledev Iktljpfx Abcshd Maximum mould surface: 600 x 1100 mm Maximum closed mould height: 452 mm Min. closed mould height: 260 mm Upper mould mass: 140 kg Flywheel revolutions per 1°: 411 Max. insertions at 1°: 28 Installed power: KW 11 Voltage: V400 Auxiliary voltage: V24 Operating air pressure: BAR 5.5÷6 Mass: Kg. 10,000 Motorized hammer adjustment Hydraulic overload safety Inverter Complete with user manual and CE conformity and 6 months warranty. • Work surface revived on CNC machine; NEW COMPONENTS INSTALLED: • Safety guards complete with safety keys; • Clutch plates; • Motor; • Motor pulley; • Motor belts; • Clutch pins and brite; • Swivel joint bearings; • Motorized hammer adjustment worm screw bearings; • Flywheel bearings; • Electric panel with touch screen; • Pedal board; • Air pressure gauges; • Hammer overtravel sensor; • Balancer cylinder gaskets.

Condition: good (used), Year of construction: 2008, functionality: fully functional, total width: 1,700 mm, total length: 1,765 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, compressed air connection: 4 bar, Wenzel Smart Gear - gear and 3D coordinate measuring machine The machine is in very good condition and fully functional. It has been regularly serviced and well looked after. Machine data: • Machine dimensions L=1765mm W=1700mm H=2232mm • Max. rotary table workpiece diameter = 5 to 270mm • Measuring accuracy gear testing in accordance with VDI/VDE2612/2613 Group II • Max. rotary table load = 20 daN • Travel paths X= 500mm Y=450mm Z=400mm • Scanning probe - Renishaw SP600M • 7x SP600 change plate for probe included • Module measuring range 0.4 - 10mm • Active air damping of the machine • Year of manufacture 2008 Lsdpovvudkofx Abcshd • Accessories such as driver, reference ball etc. as shown • Jaw chuck D=80mm with inside and outside jaws • 24 inch monitor, mouse, keyboard The following software modules are included: Gear cutting software: • TMain - program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Calculated axis position determination • TGear – Spur gear measuring program • TGear – Head and root circle option • TWorm – Worm measuring program 3D software • Metrosoft CM 3.8

Condition: used, For converting electrical energy into kinetic energy. Conversion of torque and speed through gearing. Used electric motors, available with and without gearbox, with and without brake, in various designs and with different equipment and key figures. Speeds: 67 rpm Power factors: cosφ Power ratings: kW Amperages: A Voltages: 22 V Frequency: 50 / Hz Gear types: spur gear, worm gear, bevel gear, parallel shaft gear, variable speed gear. Gearbox speeds: 8 - 559 rpm Torques: 5 - 840 Nm Drive: rpm Power factor: 0 cosφ Gearbox drive: 559 rpm Torque: 840 Nm Power: - kW Current: - A Voltage: 22 V Lhjdjvcqrkjpfx Abced Frequency: 50 / Hz

Condition: good (used), 1-shaft granulator shredder - brand LANCELIN L600 - 22 kw - shredding chamber 650 x 700 - throughput up to 1 ton/hour - 5 mobile knives/2 fixed blades mounted in bevels (scissor effect) - solid rotor - 12mm grid (other diameters possible) - 1 set of knives in reserve - loading possibility - delivered with its belt or/and vacuum cleaner and outlet cyclone and a deferrer (permanent magnet) . very reliable, very solid, no brittleness, ... Lhodpfovitnuox Abcsd very versatile and powerful, can shred cables for copper, purges, plaster, BA13, D3E, plastics, wood, bumpers, bottles, metals, etc. possibility of pre-shredding to 50mm with a pre-shredder or rotary shredder. Also for sale. price for lot .

Condition: excellent (used), Year of construction: 2010, Type: PowerGrind280 Serial number: 5000067561 Year of construction: 2010 Hole plate diameter: 280 mm Capacity: 5.5 - 8.5 t/h frozen blocks Hopper: 600 litres Power: 3 x 400V, 50Hz, 160kW Lsdpfoyn Ntbox Abcshd Dimensions: 3250 x 1650 x 2450 mm Weight: 5000 kg Including trolley for removing breaking worm and trolley for screw, plates and knives

Condition: used, module Ledpfx Asd Il Iqjbcohd Diameter mm boring diameter mm Drawer cabinet with 52 Rack Milling Cutter Mod. 0.7-10 single and multi-barreled 124 hobs Mod.0.3-2.5 40 worm wheel cutter Mod. 0.3-2.5

Condition: new, diameter / mm Cutting (quantity) / 0 weight / kg Atlanta 58 83 907 servo worm gear NEW packed. Lhsdeymquwopfx Abcod Type: 58 83 907 n1: 5000 rpm P: 5.20kW

Condition: used, Year of construction: 2007, max. wheel diameter 380 mm gear width 540 mm max. module 7 Control SINUMERIK 840 D Axial travel 600 mm table diameter 317 mm table speeds 100 U/min milling head -swivable + / - 35 Grad milling spindle drive 27,00 kW milling spindle speeds (infinitely variable) 1500 U/min diameter of hob 160 mm cutter length max. 330 mm cutter speeds max. 3000 1/min hob dia. - max. 160 mm swarf cutter lenght - max. 330 mm tangential travel max. 300 mm 10.000 mm/min tangential speed max. 3000 mm/min 7.500 mm/min oil volume 100 l coolant capacity 780 l Counterholder movement 540 mm Lhjdpfxsyt Rvhs Abced total power requirement 50,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 6,00 x 4,50 x H3,50 m for the following processes: axial hobbing, individual part milling, Worm wheel milling, roofing, deburring; NC tailstock

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 80/120 mm max. module: 2,5 max. top circle diameter: 65 mm : 22 mm : 140 mm : 120 mm Lodpfx Absxrwpkscohd slide travel axial ( Z-axis ): 320/400 mm Dimensions (L/W/H): 3270 x 3240 x 2020 mm weight of the machine ca.: 6 t P60 - The compact all-rounder for wheels, shafts and worms The P60 is the smallest machine in the Gleason line of horizontal hobbing machines. The all-rounder not only mills spur gears with all rollable profiles, but is also the optimal solution for machining steering pinions and worms. with automatic loading system, extraction unit, chip conveyor, with balancing device with 2 tailstocks, with Artec process monitoring system, type CTM-BT1.1 *

Condition: excellent (used), Year of construction: 2009, max. wheel diameter 315 mm gear width 280 mm max. module 8 min. module 1 Control Siemens 840 D distance cutter centre - clamping area 20 - 245 mm distance spindle /table 190 - 470 mm diameter of hob 160 mm tangential adjustment 110 mm ical angle 45 ° min. number of teeth 4 / 8 cutter length max. 200 mm table surface area 295 mm milling spindle speeds (infinitely variable) 50 - 400 U/min total power requirement 58 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4,1 x 3,5 x 2,6 m The machine was completely overhauled by SerWeMa in 2009 equipped with a Siemens Sinumerik 840D control. Possible uses: Straight and helical gears, crowned or tapered spur gears, Worm wheels for single or multi-start worms, Ljdpfx Asx N Ndkebcohd Worms, sprockets, ratchet wheels, splines

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch Lhedpfx Aboxaatnocjd

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, cutting height (max.): 250 mm, total height: 1,806 mm, total length: 1,012 mm, total width: 1,916 mm, cutting range round steel at 45°: 200 mm, saw drive: 1,500 W, 250 x 420mm Metal Cutting Semi-auto Horizontal Scissor Type Band Saw Machine SH-1018JA 250 x 420mm Industrial-Use Semi-Automatic Horizontal Band Saw equipped with manual vise and adjustable hydraulic down feed. It is an ideal tool for the small to medium machine shop, maintenance shop, metal fabricating shop, school, and limited run production work. It is a great machine for cutting solids, square, round, rectangle and tubing material. Its solid construction ensures many years of reliability and accuracy at a high level of performance. Standard Features A 2 hp motor, heavy-duty reducer. The 4-speed transmission is equipped with the best worm gear speed reducer. Cast iron quick set up vise. Rigid guide arms with carbide blade guides. Integral coolant system. Blade brush to remove chips from blade gullet. Down feed rate & cutting pressure control. Secure clamping via a dependable manual lead screw system with anti-slip hand wheel. Easy blade change with front access at waist level. Adjustable material stop. Bi-metal saw blade. Tools, leveling pads, and an additional wire brush. Operation & parts manual. Optional Accessories Infinitely variable blade speed Specification Type of Saw: Horizontal Automation: Semi-Automatic Miter: NO Lhodpfx Ajv R Draobcjd Production Line: Horizontal-Pivot Capacity-Max. Height (mm): ≦230 Capacity-Max. Width/Throat (mm): ≦230 Capacity-Round (mm): 250 Blade / Circular Saw Width (mm): 27 Blade Speed Min.~Max. (M/min): 24~87 Angle of swivel Min.~Max. (ﾟ): 0~45

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, cutting height (max.): 250 mm, total height: 1,052 mm, total length: 1,751 mm, total width: 1,100 mm, empty load weight: 528 kg, cutting range round steel at 45°: 230 mm, cutting range square steel at 45°: 230 mm, saw drive: 1,500 W, 250 x 460 mm Metal Cutting Semi-Auto Horizontal Scissor Type Mitering Band Saw Machine SH-460M 250 x 460 mm Industrial-Use Semi-auto Swivel Frame and Bed miter Band Saw is a heavy-duty swivel frame and bed miter design with a capacity of 250mm (10"). Key features included in this robust machine allow for the use in mass production environments as well as tool room applications. Specifically designed bed and swivel allow users to easily and accurately set angles. Standard Features A 2 hp motor, heavy-duty reducer. The 4-speed transmission is equipped with the best worm gear speed reducer. Built-in hydraulic unit includes hydraulic motor, pump, and hydraulic tank to offer the convenience of raising the saw head automatically after cut-off. A work height selector is located over the hydraulic cylinder and is used to adjust the blade to minimum clearance height over the work. Lhodpfx Abev R Dt Dscod Specially designed heavy-duty cast iron swivel center features straight and miter cuts from 90 to 60 deg (backwards) with quick setting and precise positioning. Rigid guide arms with carbide blade guides. Secure clamping via a dependable manual lead screw system with anti-slip hand wheel. Integral Coolant System. Blade brush to remove chips from blade gullet. Down feed rate & cutting pressure control. Easy blade change with front access at waist level. Adjustable material stop. Bi-metal saw blade. Tools, leveling pads. An Additional wire brush. Operation & parts manual. Optional Accessories Infinitely variable blade speed. 1M or 2M Roller table. Type of Saw: Horizontal Automation: Semi-Automatic Miter: Single Miter Production Line: Horizontal-Mitering; Horizontal-Pivot: Capacity-Max. Height (mm): ≦230 Capacity-Max. Width/Throat (mm): ≦460 Capacity-Round (mm): 250 Blade / Circular Saw Width (mm): 27 Blade Speed Min.~Max. (M/min): 24~87 Angle of swivel Min.~Max. (ﾟ): 0~60

Condition: used, Year of construction: 1990, functionality: fully functional, Technical Data: Description: Fully automatic band saw with dual-column guide for serial cutting Model: KAMU HB 270 A Year of Manufacture: 1990 Operating Modes: Manual, semi-automatic, fully automatic Working Range 90° round: ø250 mm Working Range 90° square: 250x250 mm Saw Blade Dimensions: 4,100 x 32 x 1.1 mm Voltage: 400/230 V 50 Hz Control Voltage: 230 V/24 V Dual-column: Yes Equipment: Chip conveyor, right side / chip brush motor with chip brush / operating manual Drive Motor: Infinitely variable control via helical-worm gearbox, blade speed from 11–55 or 22–110 m/min Motor Power: 2.4/3 kW Saw Blade Tension: Hydraulic blade tension Roller Conveyor (optional): Approx. 3.8m roller conveyor, included free of charge (weight approx. 300kg) Machine Dimensions (L/W/H): Approx. 2,800 x 2,200 x 1,900 mm (without roller conveyor) Material Support Height: Approx. 750 mm Weight: Approx. 1,700 kg Overall Condition: Used, good, fully functional. Private sale, not a dealer. Lodpoyrrctjfx Abcjhd Machine can be demonstrated under power. All technical data subject to change without notice.

Condition: new, Year of construction: 2026, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight NETTO/ BRUTTO 220 kg / 284 KG Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 Lsdpfx Abovuf S Necjhd 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.

Condition: used, Rotary Table WMW Type D 315 k Rotary table with mechanical drive, crank, and scale Dividing head, indexing table Serial No.: 16508 Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio: 90:1 - Crank with index plate and sector arm - Scale ring for reading at the crank - Readable degree graduation on the rotary table - Pivotable worm gear for direct indexing - Clamping via clamping screw - 14 mm T-slots in the table surface - Cardan drive Ledpfexcbpiex Abcshd - Built-in index plate: 17-25-30-39-47-57 - Rotary table drive suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E - Dividing head (index plate = 20) suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E Weight: 145 kg Good condition

Condition: used, Rotary table, indexing table, dividing head WMW type D 315 k Lhedpjxf Uytsfx Abcjd Serial no.: 10930 Table diameter: 315 mm Table height: 135 mm Gear ratio: 90 : 1 - Crank handle with indexing plate and sector arm - Graduated scale ring for reading at the crank - Readable degree graduation on the rotary table - Swing-out worm for direct indexing - Clamping via clamping lever - 14 mm T-slots in the table plate (one place damaged) - Built-in indexing plate: 23-28-33-42-51-61 Weight: 85 kg