Used Plaster Worm for sale (330)

Condition: good (used), gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: Bosch WEG, worm gear motor -Gearbox: Bosch Type FRT 3 842 503 063 -Speed: approx. 36 rpm -Motor: WEG type OD 534 T 0.09 kW -Protection class: IP44 -Shaft: Hexagon 17 x 70 mm Lhedpfxevvtr Hs Adwob -Number: 3x gear motor available -Price: per piece -Dimensions: 270/110/H165 mm -Weight: 4.9 kg/pc.

Condition: excellent (used), Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Condition: Gear motor is unused -Manufacturer: SEW-Eurodrive, gear motor with brake, parallel shaft gear unit series F -Type: FH87/G DRS132S4BE5HF/TF -Speed: 68 rpm -Power: 5.5 kW -Protection class: IP54 -Hollow shaft: Ø 60 x 280 mm -Brake: 28 Nm -Number: 2x motor available -Price: per piece -Dimensions: 760/335/H530 mm -Weight: 155 kg/piece Lsdpfx Aevvbnpedwehb

Condition: new, NEW No.1 available for immediate delivery CE Warranty The MACC SPECIAL 335 MS is a semi-automatic band saw for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting group. The belt drive is equipped with a two-speed motor and a special reducer complete with bronze gear with hardened and ground worm screw. The flywheels are suitably sized and the belt guides are sturdy and made with watertight bearings and adjustable carbide plates. By means of the electromechanical microswitch control it is possible to tension the band with the rotation of the blade. Equipped with an accident-prevention safety device on the flywheel cover and on the blade, the machine is completed by a rotating table for resting the material and a vice with a rapid approach device. Operation. The machine: 1. closes the vice and activates the band motor 2. makes the arc descend for cutting 3. the arc returns to the starting position 4. stops the band motor 5. opens the vice Manual cutting possibility Cutting speed (m/min) 38-77 Cutting thickness (mm) 1,2 Cutting range From 45 sx 60 dx Stop for cuts of the same size Adjustable Electric pump for cooling the band 0,06 kW Cutting capacity at 0°. Lhsdpfxeg S Ui Ae Adweb

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. Ljdpfx Asfh R Tyodwjhb The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Lhsdpfx Ajfibfasdwjb Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Ledjfibd Tjpfx Adwohb Machine weight 820 kg

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Accident prevention safety device on the fly cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Lhodpefh R Tujfx Adwjb Clamp jaw height 250 mm Jaw length 200 mm Worktop height 760 mm Machine weight 1250 kg 12260 N

Condition: new, Good brand new No. 1 available for immediate delivery! Ljdpfx Adjfibfgewshb Warranty " CE " Made in Italy Cutting capacity : 0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300 45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230 60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Vice with rapid locking device Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V 0.06 kW electric pump for belt cooling The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.

Condition: new, Used MACC SPECIAL 411 CSO Gravity descent bandsaw New CE The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, band guides, band tensioning) have been carefully studied to avoid the yielding of the band, increase its duration, improve linearity and cutting time. - Sawing machine with cut by falling arc regulated by a hydraulic circuit, manual bar feeding and vice closing, manual head return. - Vertical rotation on pivot with adjustable conical bearings without backlash - Band control with two-speed motor and special reducer with bronze gear and hardened and ground worm screw - Appropriately sized flywheels - Sturdy belt guides made of watertight bearings and adjustable widia plates - Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control - Vice with rapid approach device - Accident prevention safety device on the flywheel cover, on the control knob and on the blade - Hydraulic cylinder for controlled descent - Cutting thickness 1,2 mm - Cutting range 45° left 60° right - Adjustable stop for cuts of the same size - 24 V low voltage system Ledpfoficb Tjx Adwjhb - 0.06 kW electric pump for belt cooling - Pedestal with drawer for chips collection and extractable tank for the cooling liquid - Machine predisposed

Condition: excellent (used), Year of construction: 1980, Horizontal gear hobbing and threading machine for gears, splined shafts, worm screws, threads, and pinions up to 5 meters in length, complete with 3 milling heads models APFW, APGS, APG, set of gears, various steadies, and indexing device. Ljdjyba Rwopfx Adwshb

Condition: ready for operation (used), Year of construction: 1996, filling capacity 400 Liter Usable Volume 300 Liter filling amount max. 850 kg workpiece sizes max. 850 x 200 mm Individual weight of workpiece max. 30 kg turning speeds 4.0 - 15.0 U/min Inner drum width 925 mm drive motor 380 V weight of the machine ca. 1950 kg. range L-W-H 3100 x 1600 x 2000 mm good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=xxnCddCmXe4 Description: - LIMA cleaning machines * for long concrete formwork parts, formwork clamps * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode - space-saving thanks to compact design - extraction system built into the machine - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. . so that the drum flap can be opened quickly. - one work cycle takes about 20 minutes. Lodpexaa Ulsfx Adwjhb

Condition: new, saw blade diameter 520 x Ø 50 mm cutting diameter 200 mm cutting length 420 mm Cutting height at 45° 140 mm dimensions of saw-blade 520x3,6/3,0x50 mm turning speeds 2800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 310 kg. range L-W-H 1400 x 900 x 1650 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed Lodpfexaaxdjx Adwshb - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic. Star-delta motor circuit - Machine weight approx. 250 kg Cutting data : - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Special accessories included: - HM saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above best. from : 2 vertical clamping cylinders adjustable with lever valve - pneumaschine saw blade spray device - Machine can be tilted from the front on both sides using a hand crank - Machine stand

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90 Grad turning speeds 0,2 - 2,0 U/min turning speeds 1,2 - 12,0 U/min Lodpfx Adexaatnowshb bore 20,0 mm weight of the machine ca. 50 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: used, Year of construction: 1998, saw blade diameter 350 mm cutting diameter 110 mm capacity 90 degrees: flat 180 x 85 mm capacity 45 degrees: round 105 mm capacity 45 degrees: flat 130 x 85 mm capacity 60 degrees: round 105 mm capacity 60 degrees: flat 90 x 85 mm turning speeds 9-18-36-74 U/min vice max. 180 mm Control IMET CNC total power requirement 1.5 / 2.2 kW weight 710 kg range L-W-H 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering - pneumatic material clamping - Stable base with built-in automatic cooling and large chip drawer - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) Ljdpfexabzyjx Adwshb - Saw blade guard - User manual (PDF) * Machine link : ?machineno=1008-9164086

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 1,800 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 650 mm, workpiece weight (max.): 180 kg, We are selling a refurbished Wenzel WGT350 XL rack and pinion measuring machine. The machine can be used to measure gears and racks. - Max. Rotary table workpiece diameter = 5 to 400mm - Max. Rotary table load = 180kg - Travel X= 1800mm Y=200mm Z=650mm - Counterholder measuring range = 20 to 900mm - Module measuring range from 0.5mm - Max. Max. rack length = 1200mm - 6x probe changer incl. 6x SP600M plates - Temperature compensation of the machine - Active air damping of the machine - Year of manufacture 2006 - Accessories such as, driver, reference ball etc. as shown - Jaw chuck D=200mm with inside and outside jaws The following software modules are included: - TMain - program management - TStylus - Probe management - TCali - probe calibration - TAmo - Calculated axis position determination - TGear - Cylindrical gear measuring program - TShaft - Program for dimension, form, position and scanning of unknown contours - contours - TWorm - Worm measuring program - TRack - Rack software - TReverse - The parameters of an unknown gear, module (mn), helix angle (ß) and pressure angle (a), can be determined with TReverse. Lhsdpevitkiofx Adwob can be determined. - Statistical program, statistical evaluation for spur gear, bevel gear and worm gear testing. worm testing For further information, please contact us by e-mail.

Condition: as good as new (ex-display), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Other similar roller tables also available. Ledpfxst E Nw Tj Adwshb

Condition: ready for operation (used), Year of construction: 1966, functionality: fully functional, machine/vehicle number: 8588, overall weight: 400 kg, rotational speed (min.): 3,120 rpm, rotational speed (max.): 3,860 rpm, height adjustment type: mechanical, grinding diameter: 200 mm, disc diameter: 150 mm, distance table to spindle center: 400 mm, Tool sharpening machine Used cutting wheel sharpening machine, grinding machine, cutting wheel sharpening machine Lorenz Type MS 80, Year 1966, without coolant system, particularly suitable for sharpening gear planing wheels (cutting wheels), maximum planing wheel diameter approx. 200 mm, maximum stroke of grinding spindle slide approx. 50 mm, table clamping area approx. 600 x 245 mm, longitudinal table travel by hand 250 mm, vertical table adjustment by hand 275 mm, with coarse and fine feeds, maximum usable grinding wheel diameter 150 mm. Includes cutting wheel sharpening device MSV 75 for generating a cone-shaped surface grind on straight gear cutting wheels. Driven by a worm gear motor. Comes with operating manual. High-performance special machine for sharpening cutting wheels. Cutting wheel available at a favorable price. Inspection under power is possible by prior appointment. Price on request / special price. All technical details subject to errors or typographical mistakes. Lhjdjffybgepfx Adwjb Sale exclusively within EU countries.

Year of construction: 1985, condition: ready for operation (used), A thread and worm grinding machine Reishauer AG is available. Grinding length: 450mm, clamping length: 700mm, max. grinding diameter: 200mm, max. lead: 80mm, max. workpiece weight: 100g, max. lead angle: +/-25°, grinding wheel diameter: 275mm/350mm, speed: 1850rpm. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1600mm, weight: approx. 3400kg. Including oil centrifuge, hood, oil mist extraction and various accessories. Dokumentation vorhanden. An inspection on site is possible. Lhjdpox Dm Dnsfx Adwsb

Condition: excellent (used), HHydraulic drive variator with 3.0 kW motor, 1450 rpm, with reduction gear for speed reduction, electric adjustment via worm gear motor, output speed 0 to 25 rpm, output torque 1200 Nm at 14 rpm or approx. 3 kW at 14 to 25 rpm Lsdpox U Tfpjfx Adwehb

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Complete in standard design with: - Sturdy, torsion-free steel frame, of welded and bolted construction - PRESS BEAMS LATERALLY with continuous pressure surface and 25 mm thick, coated bearing plate - Counter-pressure surfaces (lateral pressure wall, base) are 25 mm thick, coated, continuous bearing plates - Electric adjustment of the press beam via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance lead nuts with grease reservoir - Pressing is performed electromechanically using a worm gear motor (0.75 kW) - The pressing force of the press beam is continuously adjustable electronically by potentiometer and regulated by a frequency inverter, offering absolutely wear-free pressure force control - Pressing force for the vertical press beam min. 300 daN (kg) to infinitely variable max. 2200 daN (kg) - Press and adjustment speed of the press beams with fine positioning, via 3-position selector switch 5 / 10 / 25 mm/second - Extremely simple operation via two separate push buttons; two movement cycles (open/close) selectable via control Lsdpowx Nfgofx Adwshb - Freely adjustable pressing time pre-selection with automatic opening, 0–30 min. (switchable to seconds or hours) - Working height/loading height 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400V, 3Ph, 50Hz (1.6 kVA, 16 A)

Condition: excellent (used), Year of construction: 2009, max. wheel diameter 315 mm gear width 280 mm max. module 8 min. module 1 Control Siemens 840 D distance cutter centre - clamping area 20 - 245 mm distance spindle /table 190 - 470 mm diameter of hob 160 mm tangential adjustment 110 mm Lhodex N Ndkepfx Adweb ical angle 45 ° min. number of teeth 4 / 8 cutter length max. 200 mm table surface area 295 mm milling spindle speeds (infinitely variable) 50 - 400 U/min total power requirement 58 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4,1 x 3,5 x 2,6 m The machine was completely overhauled by SerWeMa in 2009 equipped with a Siemens Sinumerik 840D control. Possible uses: Straight and helical gears, crowned or tapered spur gears, Worm wheels for single or multi-start worms, Worms, sprockets, ratchet wheels, splines

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Lhjdjt Dx U Sspfx Adweb Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 80/120 mm max. module: 2,5 max. top circle diameter: 65 mm : 22 mm : 140 mm : 120 mm slide travel axial ( Z-axis ): 320/400 mm Dimensions (L/W/H): 3270 x 3240 x 2020 mm weight of the machine ca.: 6 t P60 - The compact all-rounder for wheels, shafts and worms Lhjdoxrwpkopfx Adwob The P60 is the smallest machine in the Gleason line of horizontal hobbing machines. The all-rounder not only mills spur gears with all rollable profiles, but is also the optimal solution for machining steering pinions and worms. with automatic loading system, extraction unit, chip conveyor, with balancing device with 2 tailstocks, with Artec process monitoring system, type CTM-BT1.1 *

Condition: used, Year of construction: 1972, Technical details: Lodswi Ni Tspfx Adwjhb grinding wheel diameter: 400 mm total power requirement: 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,5 x 1,4 x 1,3 m Dressing Grinder for gears REISHAUER AM max. width of grinding wheel 104 mm max. dia. of grinding wheel 400 mm max. module 7 min. module 0,5 pressure angle 10 - 30 ° grinding worm dia. 270 - 400 mm width of grinding worm 62/84/104 mm grinding worm turning speeds: at profiling 18/35/70 U/min electrics - voltage/frequency 380 / 50 V/Hz long. movement of crowning device 156 mm *

Condition: used, Year of construction: 1997, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 Lhsdpfx Adex Aq Egjwjb max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg without filter *