Used Plastic Drawers for sale (7,121)

Condition: used, Year of construction: 2010, Motan MDE 40 For sale is a compact mobile dry air granule dryer Motan MDE 40. Ideal for side-by-side or on-machine drying of hygroscopic plastic materials. Standard Iedpfsz Ruw Uex Agyoih single-phase 230 V power connection makes it easy to install anywhere in the production hall. Manufacturer: Motan Model: MDE 40 Power Supply: 230 V / 50 Hz (1 N PE) Power Consumption: 1.3 kW (6 A) Protection Fuse: 10 A

Condition: excellent (used), Year of construction: 2020, RegloChill RC2E 30/C – Air-cooled water chiller (Regloplas) Manufacturer: RegloChill / Regloplas Model: RC2E 30/C Serial no.: Year of manufacture: 2020 Made in: Italy Iiedpoz Rvyqjfx Agyjh Cooling capacity: approx. 28 kW (to be confirmed) Refrigerant: R407C, 6.5 kg Main power supply: 400 V / 3 PE / 50 Hz Rated current: 25 A Short circuit current: 10 kA Auxiliary power supply: 110 V / 24 V Water pressure: 3.5 bar (nominal) Design pressure: 18 barg (HP) / 30 barg (LP) PED category: II Set point temperature: -10 °C to +25 °C Max. ambient temperature: +40 °C Tank volume: 200 l Fan capacity: 15,500 m³/h Dimensions (W x H x D): approx. 900 x 1680 x 1500 mm Weight: 475 kg Wiring diagram: SA 095F-00A

Condition: excellent (used), Year of construction: 2005, Welcome. We offer the following: Iedpfsz Sk Dzsx Agyeih Temperature regulator – thermostat for injection molds – model HB THERM 160 U1 – series 4 Technical data: Manufacturer: HB - THERM Type: HB - 160U1 Year of manufacture: 2005 Medium: Water Temperature: 160° C Heater power: 8 kW

Condition: good (used), For sale: professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the UK. This is a modern eyepiece-free microscope, providing a spatial 3D image without the need to place eyes against eyepieces – offering exceptional comfort for quality control and precision assembly tasks. Technical specifications: • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 objective) • Type: stereo, eyepiece-free • Illumination: integrated LED in the base Isdpsz Sli Eefx Agyoih • Power supply: 230 V • Head with focus and height adjustment • Serial number: MFS 11572 • DGUV safety inspection – current safety test certification Condition: • Used item, optics are clean, mechanics fully operational. • Damaged upper cover of the plastic element (visible in photos) – does not affect operation or image quality. • Illumination is fully functional. • Device tested and ready for use. Applications: Laboratories, quality control, electronics, optics, and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics.

Condition: new, Year of construction: 2026, power: 14 kW (19.03 HP), overall weight: 1,250 kg, total length: 1,300 mm, total width: 1,500 mm, total height: 2,140 mm, cutting length (max.): 500 mm, cutting diameter: 40 mm, number of blades: 5, rotor length: 400 mm, warranty duration: 12 months, MIZAR CMT Compact Series - All-In-One Copper Wire Granulator & Cable Recycling Machine The Ultimate Compact Solution for Maximum Copper Recovery The MIZAR CMT is an advanced, all-in-one cable recycling machine engineered for facilities with limited space but high-performance demands. Integrated with state-of-the-art Turbo Mill technology, it ensures the complete separation of even the finest copper wires (hair wires) from plastics, delivering maximum purity and scrap copper recovery in a single compact footprint. KEY ADVANTAGES & FEATURES • All-In-One Design: A complete, plug-and-play copper wire granulator engineered into a single, space-saving unit. Iiedpjv Hbdrsfx Agysh • Integrated Turbo Mill Technology: Achieves exceptionally high purity by aggressively pulverizing and separating ultra-fine copper wires that standard granulators cannot process cleanly. • Optimized Input Capacity: Safely and efficiently processes scrap cables with a maximum thickness of up to 40 mm and a maximum feeding length of up to 50 cm. • High-Efficiency Copper Recovery: Highly effective in separating copper and plastic components, maximizing your recycling profitability. • Cost-Effective Operation: Energy-efficient drivetrain minimizes daily operational costs without sacrificing throughput. PROCESSED MATERIALS • All types of scrap electrical cables, flexible wires, communication cables, and complex harnesses (Max Ø 40 mm / Max Length: 50 cm). Ready for an all-in-one cable recycling upgrade? Contact us for a customized quotation, technical details, or a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,060 kg, total height: 1,790 mm, total length: 1,370 mm, total width: 980 mm, We are a company with over 30 years of experience in trading machinery for the plastics processing industry. All machines offered are available from our stock, and we can perform tests using your material upon request. Iisdpfxexud Nvs Agysh The XC series granulators are designed for granulating both soft and hard plastics. The stainless steel housing and bearing lubrication system ensure quiet and stable operation. Each model is equipped with an ammeter. Versions with cyclones are also available. The control cabinet is based on Siemens components. Before purchase, it is possible to carry out material trials on the customer's material. For any questions, please contact us by email or phone. P&F Wartacz was established in 1990 and is currently the oldest trading company in the plastics machinery sector in Poland, continuously supplying injection moulding machines, granulators, crushers, chillers, belt conveyors, peripheral equipment, and spare parts. Rotor width (mm): 480 Motor power (kW): 20 Rotor knives (pcs): 24 Fixed knives (pcs): 2 Weight (kg): 1060 Option to purchase with extraction unit and cyclone instead of drawer. Unused machine available immediately from stock, tests before purchase are possible. (Dozens of machines available on stock)

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Iiedpsy Ufk Rofx Agyeh Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,100 kg, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, total length: 9,325 mm, total width: 2,550 mm, total height: 1,000 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – 3-Axle Turntable Combination Trailer for Roll-Off Containers & Machinery Transport * High-tensile steel welded chassis construction * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Adjustable and removable longitudinal guide rails, approx. 115 mm high * Heavy-duty turntable with ball-bearing slewing ring * Recessed mushroom lashing points on the top and sides of the outer frame, each rated at 5 tonnes * Integrated stake pockets in the outer frame (internal dimensions: 70 × 40 mm), convertible to 5-tonne lashing rings * Wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Quarter mudguards * Spare wheel carrier including mounting kit * Spare wheel matching the standard tyres, mounted on a steel rim * Lockable plastic toolbox with drawer and shelf insert, dimensions: 650 × 520 × 670 mm (W × H × D) ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * Drum brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension with raise-and-lower valve ### Wheels & Tyres * 235/75 R 17.5 tyres * Twin steel wheels, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Electronic Vehicle Stability Control System * Duomatic air coupling at the front with connecting line to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 1 × 15-pin front connector with connecting cable ### Loading Platform * Steel floor * Recessed front roller channel for roll-off containers * Suitable for roll-off containers from 5,000 mm to 7,000 mm in length ### Loading Ramps * Lockable storage compartment for loading ramps beneath the loading platform * Reinforced access hatch suitable for driving over * 1 pair of aluminium loading ramps, approx. 3,000 mm long and 450 mm wide Ijdpfozhf Akox Agyoih * Load capacity: 14,000 kg per pair ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Surface Protection & Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: used, mileage: 79,000 km, power: 110 kW (149.56 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 07/2027, color: white, gearing type: mechanical, emission class: euro6, total length: 4,904 mm, total width: 1,904 mm, total height: 1,990 mm, loading space length: 2,440 mm, loading space height: 1,340 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, Beautiful and well-maintained VW T6 L1 4Motion / All-Wheel Drive van, optimal equipment, ideal for trades and businesses. Workshop/shelving system by Sortimo and electrical systems (details below). Rear wing doors All-wheel drive (4Motion, 4M, 4x4, 4WD) Underride protection for engine/transmission made of plastic GVWR 3.2 t (including reinforced 16" steel rims) Trailer hitch with 2.5 t towing capacity LED lamps (low beam + high beam) retrofitted Auxiliary heating / additional heater (water), programmable and with remote control Heated driver's seat Climatic air conditioning with activated carbon filter 3-seater, double passenger seat with foldable work surface Comfort driver's seat with foldable armrests, adjustable in multiple ways: seat height, backrest, lumbar support Seat covers in Simora fabric Driver assistance systems: - PDC Park Distance Control front and rear, visual + audible display - Surround monitoring system (Front Assist) with City Emergency Braking function - ACC Automatic Cruise Control (automatic distance control) - Cruise control (adaptive) with automatic distance control ACC and speed limiter - Fatigue detection - Hill start assistant - Trailer stabilization - Tire pressure monitoring - Brake assist (HBA) - Multi-collision brake - ABS, ASR, ESP, EDS Light and Visibility Package - Automatic headlight activation - Automatic windshield wipers Leather multifunction steering wheel - Automatically dimming interior mirror Composition Media audio system (radio/CD player, MP3 playback function) - Radio - CD player - USB, AUX-in, SD card, Bluetooth audio - Hands-free system for mobile phone with Bluetooth - App-Connect (Android Auto and Apple CarPlay) prepared, can be activated - Voice control prepared, can be activated Multifunction display Plus / On-board computer Driver and passenger airbags Electrical Package 1: - Electric windows - Electrically adjustable and heated exterior mirrors Central locking with remote control Fog lights Spare wheel and jack 2nd battery with separation relay 2x 12V socket in the cab Heated windshield washer nozzles Wheelbase 3000 mm Sliding door on the right side of the cargo area with tinted glass Rear wing doors with tinted, heated glass, with wiper system Commercial vehicle registration N1 Engine 2.0 L - 110 kW TDI 6-speed manual transmission Steering wheel adjustable in length and height Heat-insulating glass Cargo area equipment: Workshop installation by Sortimo (similar to Aluca, Bott, Würth). Shelving on both sides with shelf compartments, storage compartments, holders for small parts containers (without containers) and drawers (5x). Extendable workbench. Cargo area partition with window. Robust wooden floor. Load securing through fastening rails. Walls (with plastic panels) and ceiling lined. LED lighting. Ventilation and air intake. Electrical systems: 230V voltage converter/inverter, supplied via auxiliary battery. 4 x 230V sockets with fuse protection. Cargo area dimensions: - Length at the bottom: approx. 244 cm - Length in the middle: approx. 225 cm - Length at the top: approx. 220 cm - Height: approx. 134 cm Ijdpfxjzz Aaas Agyeih Mounted tires: Winter tires 215/65 R 16 with approx. 5 mm tread depth at the front and approx. 4 mm or approx. 6 mm at the rear Additional tires: Summer tires 205/65 R 16 with approx. 4/4/5/5 mm tread depth Service history according to VW: 06.2021 / 22,700 Longlife inspection 08.2022 / 35,184 Longlife inspection + service 1 + oil change for all-wheel drive coupling 07.20

Condition: used, mileage: 3,25,000 km, power: 330 kW (448.67 HP), first registration: 02/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,300 mm, loading space width: 2,440 mm, loading space height: 2,500 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, We are very pleased that our offer has aroused your interest and would like to assure you that you can purchase a good and affordable vehicle with a traceable service history from us! Special equipment: Front axle load 8.0 t, trailer brake 2-line, equipment package: Economy, fuse box, 220 Ah battery (AGM), Bi-Xenon headlights, CB radio, air horn, driver assistance system: turning assistant, vehicle without MirrorCam exterior mirror camera, vehicle without front splash guard, 12-speed gearbox - type: G 211-12, automatic climate control, upper comfort bunk, wide, 3-part fender, 3-part fender without splash guard, fuel tank: 630 L aluminum, left, cooler box / refrigerator, integrated air intake, roof air deflector (lockable, without base trim), reinforced engine brake, wheelbase variant 4900 mm, frame overhang 1950 mm, spare wheel, spare wheel jack on the side, retarder, acoustic reversing warning (external warning signal), tailgate switch, headlight cleaning system, reinforced rear crossmember, fleet management system interface, drawers under the railing, seat cover / upholstery: co-driver's seat velour, seat cover / upholstery: driver's seat velour, seats in the cab: driver's seat comfort suspension seat, external sun visor, storage compartment on the outside left, 12V / 15 A socket in the co-driver's footwell additionally, 12V socket additionally, 24V socket in the co-driver's footwell additionally, curtain for sleeping cabin Iodpfx Ajzyfaajgysih Additional equipment: Emission standard EURO 6, storage compartment above the windshield with a lid, axle configuration: 6x2, Actros 5, Actros L cab, heated approach / front mirrors, 24V / 15-pole trailer socket, exhaust on the right outside, equipment package: Powertrain 2, batteries arranged side by side, differential lock on the rear axle, torque increase 12th gear, compressed air connection in the cab, steel compressed air tank, compressed air unit with condensate monitoring, medium compressed air unit, automatic activation for driving lights (light sensor), cab: fixed cab entry, cab: interior package chrome, cab: hydraulic tilting, cab: L StreamSpace, 2.50 m, flat floor, cab variant: StreamSpace, flat cab floor, cab: width 2.50 m, cab: mounting height 765 mm, cab variant: L, door extension for cab, storage compartment on the outside right, electric lift roof, front bumper corners in plastic version, tinted windshield with band filter, navigation system, remote online remote query function, interactive cockpit multimedia, carpet on the engine tunnel, sunblind for side window, driver's door, preparation for upper comfort bunk, wide, radiator grille, air intake behind the cab, cab: steel-sprung, comfort, vehicle outline lights LED, suspension: air / air (full air), electric window lift, vehicle without rear window, generator 100 A, regulated, speed limiter system, urea tank (AdBlue): 60 L, rear axle with active lubrication, unregulated, rear axle bevel gear 440, body / superstructure: chassis, lower comfort bunk, comfort locking system, electronically controlled power steering pump, steering wheel with multifunction buttons, 2-stage air compressor, heated air dryer, engine 12.8 L - 330 kW R6 diesel (OM 471), engine variant OM 471, trailing axle 7.5 t, unladen, liftable, type of use: local distribution, wheelbase not specified, wheelbase variant 4000 mm, ramp mirrors, waste heat recovery, disc brakes on front and rear axles, key with remote control.

Condition: used, mileage: 2,73,856 km, power: 460 kW (625.43 HP), first registration: 08/2023, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, brakes: retarder, color: gold, gearing type: automatic, emission class: euro6, total length: 6,158 mm, total width: 2,550 mm, total height: 3,935 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: Axle load measuring device, front axle load 8.0 t, audio system: digital radio DAB / DAB+, equipment package: Driving, electric sun visor for windshield, sun visors for side windows, driver and passenger door, sun visor for side window, driver's door, equipment package: Economy, circuit breaker, urea tank (AdBlue): 60 L, equipment package: Comfort, illuminated Mercedes star, electric sliding/lifting roof (glass), cooler box / refrigerator, premium comfort mattress (lower), switch for MirrorCam on the bed, ambient LED lighting (driving and living), equipment package: Media, notebook holder, 12V socket in the passenger footwell, 24V / 25 A socket in the passenger footwell, 24V socket in storage compartment on the right, equipment package: Safety, driver's airbag, equipment package: Storage space, door extension for cab, front bumper corners in plastic, tinted windshield with band filter, storage compartment above windshield, lockable, air intake on the side of the cab, 220 Ah battery (AGM), air horns (2) on the cab roof, electrical pre-wiring in the cab 24V / 100 A, cab: with air suspension, cab: shaving mirror, 12-speed gearbox - type: G 330-12, oil cooler for gearbox, rear lights LED, rear axle bevel gear 485, integral rear, folding table in the railing, automatic climate control, comfortable upper bunk, wide, 3-piece fender, fuel tank: additional tank 430 L, aluminum, right, air deflector on the roof (fixed) and on the side, enhanced engine brake, frame overhang 1050 mm, smoker's package, retarder, fifth wheel coupling, low maintenance, headlight cleaning system (SRA), additional key with remote control (2), interface for fleet management system, drawers under the railing, seat cover / upholstery: passenger seat leather, seat cover / upholstery: driver's seat leather, seats in the cab: armrests on both sides of the passenger seat, seats in the cab: passenger seat comfort suspension seat, seats in the cab: passenger seat backrest can be folded, seats in the cab: driver's seat climate-controlled suspension seat, sound system, storage compartment outside left, additional 12V / 15 A socket in the passenger footwell, 24V / 15 A socket in storage compartment on the right side, 24V socket in the cab, preparation / switch for lift axle on the trailer / semi-trailer, preparation for additional headlights, sleeping cabin curtain, warning device for passenger seat belt, warning device for seat belts Additional equipment: Isdpfx Ajz Ddywogyeih Emission standard EURO 6, axle configuration: 4x2, Actros 5, Actros cab L, heated approach / front mirrors, trailer electrical and brake connection (low), trailer socket 24V / 15-pin, access step on the cab (left), exhaust on the right side, exterior mirror camera MirrorCam, batteries arranged side by side, differential lock rear axle, compressed air connection in the cab, steel compressed air tank, compressed air unit with condensate monitoring, medium compressed air unit, automatic switching for driving lights (light sensor), cab: fixed cab entry, cab: interior package chrome, cab: hydraulic tilting mechanism, cab: L GigaSpace, 2.50 m, flat floor, cab variant: GigaSpace, flat cab floor, cab: width 2.50 m, cab: mounting height 765 mm, cab variant: L, exterior mirror base MirrorCam chrome / vehicle color, door extension for cab, storage box left under cab, storage compartment outside right, sun visor outside, electric lifting roof, front bumper corners in plastic, navigation system, remote

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,800 kg, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Trailer for Roll-Off Containers * High-tensile steel welded chassis construction * Sliding frame system: * The container is loaded from the rear onto the sliding frame and pushed forward * Front container stop adjustable for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for the transport of roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Rear impact protection, mounted vertically on left and right side, with delta rubber buffers on underrun protection brackets * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar Iodpfx Agjzggghsysih * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension with raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Drive-away protection: opening the container locking system automatically activates the spring-loaded parking brake * Vehicle Stability Control System * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 additional LED work lights at the rear, activated via reverse gear * 2 x 7-pin non-interchangeable front plugs with connecting cable ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Year of construction: 2026, condition: new, functionality: fully functional, power: 300 kW (407.89 HP), load capacity: 2,000 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES Isdeyy Rk Topfx Agyeih • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34002026856, empty load weight: 5,592 kg, maximum load weight: 29,408 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: white, The images are archive images! The vehicle may be in use! Iiodpfsx Rq Sljx Agyoh Chassis: Saddle for trucking company Fine-grained steel welded construction in reinforced Scandic design, saddle plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock profile" for securing lashing straps Lashing rings for use in the "Load-Lock profile", 6 tons each, loose 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Free swivel radius to the support leg approx. 2200 mm, support leg dimension approx. 2350 mm 2 shims with holder Side impact protection, aluminum Under-run protection, galvanized steel Quarter panel fenders in front of and behind the axle unit with anti-spray flaps, only on the last axle 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 pair of pole pockets recessed in the outer frame/floor at the very front, inner dimension 83 x 83 mm 2 steel poles, B=80/ D=80/ L=1200 mm, hot-dip galvanized Note: The pole pockets / insertion poles are not designed for the sole securing of long materials, pipes, etc. without lashing 4 pairs of lashing eyes, yellow marked Axles + Suspension 3 BPW drum brake axles "Axle/chassis laser-measured" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS brand Wabco Premium, electronic braking system with EBS socket at the front, without connecting cable, Wabco Premium incl. open CAN BUS for telematics Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plate lighting in LED (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Front panel / corner posts at the front 2 580 mm high, corner posts made of steel in a full volume design, release mechanism for side tarpaulin on the front panel "Crash-Blocker", at the bottom inside at approx. 140 mm height with steel ram protection Sliding battens Rows of wooden sliding battens Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning devices made of stainless steel Floor Sieve plate approx. 30 mm thick, on longitudinal crossbeams for high point load capacity for forklift axle load up to max. 7100 kg Note: Floor deformation due to weather conditions possible (no guarantee)! Rear panel / corner posts at the rear Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal swivel bar locks each Roof Sliding tarpaulin, rear lift that can be folded up, with tarpaulin that can be slid from back to front, tarpaulin color: white optimal rain gutter at the rear, at the top of the rear beam, above the doors Country of approval / plates Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the side a

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, type of input current: AC, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm Iiodpfxjyxccre Agysh - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, mileage: 1,10,685 km, power: 132 kW (179.47 HP), first registration: 10/2019, fuel type: diesel, empty load weight: 5,880 kg, overall weight: 7,200 kg, wheelbase: 3,750 mm, fuel: diesel, color: white, emission class: euro6, Equipment: ABS, air conditioning, cruise control, onboard computer, soot filter, Special features - 6-speed manual transmission - Electric windows - Radio - ABS / ASR - Differential lock - Air conditioning - Power steering - Central locking - Rear view camera - 6 new tires - New windscreen Superstructure Aerial work platform France Elevateur 172 CPL - Working height: 17.4 m - Maximum outreach: 10.3 m - Basket load: 265 kg / 2 persons 220V power outlet in the platform - Turret rotation: 400° - Maximum working inclination: 5% - Maximum tilt: 15% - Steel boom with 2 telescopic sections - Articulated jib with 180° pendulum motion - Cable duct integrated into the telescopic boom - Electrohydraulic and sequential controls - Remote control in cab - 4 hydraulic outriggers - Tilt alarm - Plastic work basket (1000 V insulation) - Priority electrohydraulic emergency controls - Road position return light in cab - Hour meter - Emergency pump - Sine wave inverter 2500VA - Basket dimensions: 1300 x 780 x 1150 mm The aerial work platform, mounted on a very stable 7.2-ton truck, is especially suitable for safe operation on telecommunications networks, public lighting maintenance, telecommunication lines, or facade work. This is an especially robust vehicle with numerous additional features and equipment. The platform from France Elevateur allows work at heights of up to 17.4 m and a lateral outreach of up to 10 m. A 220V socket in the work basket enables connection of various power tools such as drills, lamps, or measuring devices. The vehicle is equipped inside with a workshop setup including drawers, cupboard and workbench for secure storage of tools and small parts. All functions of the access platform have been checked in our workshop and are fully operational. The vehicle is ready for registration. Included in the price are German registration documents, TÜV inspection, and UVV safety inspection. Additional equipment such as a tow bar, lighting, shelving, and further options are available on request. The vehicle is now available at our location in Langenfeld. ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles we offer are the property of ACR-Juretzki Nutzfahrzeughandels GmbH. All presentations use only original photos taken at our own premises – thus we guarantee full transparency concerning the actual condition of the vehicle. Our vehicles undergo comprehensive preparation before sale in our own specialist workshop – including mechanics, bodywork and painting. Thus, they are optimally prepared for the next technical inspection. We also guarantee the authenticity of the stated mileage. Trust is good – control is better: On request, your vehicle can be inspected by independent testing organizations such as TÜV, DEKRA, or KÜS – also as part of a remote inspection. Our service for you: Ijdpfxsxwlr Ro Agysih Delivery of your vehicle to your desired location Complete processing of export formalities, including export license plates Individual financing and leasing offers Trade-in of your current vehicle Installation of special equipment on request

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,750 kg, total height: 2,000 mm, total length: 1,560 mm, total width: 1,320 mm, We are a company with over 30 years of experience in trading machines for the plastics industry. All offered machines are available from stock, and we can perform tests on your material. The XC series granulators are designed for shredding both soft and hard plastics. The stainless steel housing and bearing lubrication system ensure quiet and stable operation. Each model is equipped with an ammeter. Versions with cyclones are available. Control cabinets are built with Siemens components. Material trials with customer samples are possible before purchase. For any questions, please contact us via email or the provided phone number. P&F Wartacz was established in 1990 and today we are the oldest trading company in the plastics processing sector, continuously distributing injection molding machines, granulators, crushers, chillers, conveyor belts, peripheral equipment, and spare parts. Rotor diameter (mm): 500 Rotor width (mm): 720 Motor power (kW): 37 kW Rotor knives (pcs): 27 Fixed knives (pcs): 4 Iiedpfx Aew Inzwegysh Weight (kg): 2750 The unit can be purchased with extraction and cyclone instead of a drawer. The machine is unused and available immediately, with testing possible before purchase. (Several dozen machines in stock)

Year of construction: 2023, condition: new, Overband plate magnet with cleaning mechanism Execution in VA 1.4301 tightly welded incl. drawer for cleaning Dimensions: 800x500x180mm 4 - piece M16 eyebolts on the back Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Overband plate magnet Execution in VA 1.4301 tightly welded incl. drawer for cleaning 420x420x180mm 600x500x180mm 800x500x180mm 1000x500x180mm 1200x500x180mm Completely welded stainless steel housing to protect the magnetic core Ring eyelets for hanging Cleaning drawer for easy removal of accumulated impurities. Installation above all conveyor systems possible... Iisdpjk S Dzajfx Agyeh

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 7,550 kg, maximum load weight: 27,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Fine-grained steel welded construction in lightweight design, up to the support legs, drawbar with interchangeable 2 kingpin Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Extendable ladder at the rear Door lock on the side 2 wheel chocks + holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps, foldable fender for light unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with bracket 1 plastic toolbox, with drawer and insert, w=650/h=520/d=670 mm, can be locked with a padlock 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering & starting assist, actuated 3x by the brakes (starting assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle Stability System Wheels & Tires 385/55R22.5 according to manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front Self-Loading System (SBS) Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulic system. Switching between forward/reverse operation is done electrically via remote control with cable. -Shovel floor power supply via side marker light Actuation hydraulically via truck auxiliary drive Hydraulic connection with hose on the front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump performance: Flow rate: 110 l/min Pressure: 250 bar Oil tank filling min: 100 l Self-Loading System (SBS) Floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design SBS Tipper Body Aluminum box tipper body, front and side walls made of aluminum hollow profiles, welded around the top with a wide special reinforcement profile made of aluminum, and welded with a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 externally mounted swivel locking rods, locked at the top & bottom. Rear wall with mechanical safety locking, operation at the rear on the left in the direction of travel. With pivoting crossbar at the top. The door locks can be locked with a padlock. Isdpei Riwxsfx Agyeih Standing platfor

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r22.5, tire condition: 100 %, Additional information Chassis Fine-grained steel welded construction in lightweight design, extending to the support legs; kingpin plate with 2 replaceable kingpins Lateral floor preparation for lashing eyes 24-ton, two-speed support legs, single-sided operation, with straight lower part, without shock absorption Extendable ladder at the rear Door latch on the side 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps; foldable mudguard for lighting unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with holder 1 plastic toolbox, with drawer and insert, b=650 / h=520 / d=670 mm, lockable with a padlock (padlock not included) 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking system 2-line compressed air braking system; color-coded lines for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connection line EBS, Electronic Braking System with EBS socket at the front, without connection cable With raise and lower valve Vehicle - Driving stability system Wheels and tires 385/55 R22.5, according to manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cable Sliding floor hydraulics Hydraulic cylinder with sliding mechanism installed in the floor; 2-circuit hydraulic system Isdpfxei Riyws Agyeih Switching between forward/backward movement electrically via remote control with cable - Sliding floor power supply via parking lights Actuation hydraulically via truck PTO Hydraulic connection with hose at the front wall and HDK screw connector NW = 48 mm Note: A 2-circuit hydraulic system is required! Recommended pump output: Flow rate: 110 l/min Pressure: 250 bar Minimum oil tank filling: 100 l Sliding floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design Tipping body Aluminum tipping body made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded together at the top all around with a wide special reinforcement profile made of aluminum, welded to a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom with rail cleaner Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 pieces of externally mounted swivel bolts, locked at the top and bottom. Rear wall with mechanical safety locking, operation at the rear on the driver's side. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platform with access ladder on both sides in driving direction left/right and railing, for opening

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,000 kg, maximum load weight: 29,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,800 mm, total width: 2,550 mm, tire size: 385/65 r22.5, tire condition: 100 %, Custom-Made Transport Solution Iisdpfji Ri R Dex Agysh Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis Fine-grain steel welded construction, drawbar with interchangeable 2 kingpin Vario stake system 4 pairs recessed in the loading area, can be pushed together to 2,100 mm and extended to approx. 3,500 mm for loading. Stakes can be locked every 100 mm on an inner width of 2,100 mm to 3,000 mm, 4 pairs of divisible stakes 600 mm + 1,200 mm, total height 1,800 mm removable. With a stake inner width of approx. 2,350 mm or more, there is an overwidth. Vario end walls Floor prepared for attaching 3 end walls. 4 x 5 pairs of Vario stake pockets for attachable end walls and 1 x 3 pairs in the middle for transporting construction steel mats of 2 x 5,000 mm or 2 x 6,000 mm. 2 Vario end walls, each consisting of 1 pair of plug-in stakes and 1 crossbar at the top, approx. 2,200 mm wide. Crossbar can be extended by 220 mm on both sides, with lashing eye for securing. Height of Vario end wall approx. 1,900 mm, can be converted to a height of 1,300 mm or 700 mm. 4 stake pockets recessed in the middle of the floor for 80 x 80 mm plug-in stakes 1 pair of supports at the bottom for Vario end wall at the front 1 pair of supports at the bottom for Vario end wall at the rear Outer frame slightly angled with Load-Lock profile for attaching lashing straps 14 pairs of lashing eyes additionally recessed in the outer frame, each 5 tons 24 tons, 2-speed winch, single-side operation, with straight lower part, without stroke compensation Extension ladder at the rear Aluminum side impact protection Steel underrun protection, galvanized Quarter fender in front of and behind the axle assembly with anti-splash flaps only on the last axle Rear impact protection 8 steel winches with wire rope and swivel hook, 4 on the left and 4 on the right with rope guide through the outer frame, 1 removable attachment gearbox for steel winch - supplied loose Spare wheel holder for 1 wheel, with wheel fastening kit 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. 1 closed stake storage box, open at the top, under the loading area, doors on both sides, w=450 mm/H=400/420 mm/d=2460 mm 4 lashing/stake rails crosswise recessed in the floor across the entire width up to the outer frame (max. usable inner width between the outer plug-in stakes approx. 2170 mm), approx. 100 mm high. With 20 mm round steel strips, at the top and bottom, distance from top to bottom approx. 60 mm. At the bottom with an angle plate as a closure, half open downwards. For lashing and inserting 80 x 80 mm stakes. Wrap-around Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured, reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start assist, operated 3x brakes (start assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended driving height, therefore no guarantee for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,750 mm, loading space width: 2,480 mm, total length: 9,925 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: -, tire condition: 100 %, Additional Information Tandem Platform Trailer Type TPS 180, Standard construction with forklift mount Chassis: Central axle trailer Fine-grain steel welded construction Outer frame slightly angled, new design with Load-Lock profile for securing tie-down straps 1 pair of geared support legs at the front, with straight lower part and single-sided operation on the right-hand side Partial wheel arches 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock Mount for a carried forklift at the rear, including 2 fork pockets, 2 extendable support tubes, and a mount for chain securing with a locking pin. Underrun protection with light unit that can be folded away. The forklift mount shifts the axles to the rear; please consider load distribution when driving without a forklift. Customer risk! Note! Forklift mount! Carrying a forklift can significantly reduce the vertical load. Counterweight at the front is required! On wet and slippery roads, additional ballast weight or a load at the front of the trailer, weighing at least 2 tons, is necessary; the speed should then be reduced, and the driving style adapted to the road and driving conditions. The forklift must always be secured with chains during transport. The distance between the lift mast and the trailer body should be a maximum of 45 mm, or the vertical forklift tines must rest against the forklift pockets at the end. We assume that the towing vehicle does not have a steering or lift axle, or that the steering axle is always locked or the lift axle is always on the ground. Coupling System: Central axle trailer Drawbar with tested 50 mm drawbar eye, freight forwarding design Lower coupling on the drawbar Folding mount with spring support on the drawbar, for guiding the connecting cables to the truck Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axle/suspension to reduce tire wear and fuel consumption Air suspension with raise and lower valve 1st axle: automatic lift axle with proximity switch, for lift axle Wheels and Tires 385/65R22.5, according to manufacturer's choice Steel rims, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake Vehicle - Driving Stability System Duomatic connection at the front, with connecting cable to the towing vehicle, connection on the right-hand side EBS, Electronic Braking System with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights in LED, side yellow LED lighting, license plate lighting in LED Iijdpfx Agendwdhjyeh

Condition: new, Year of construction: 2024, For max. screen size: 120x145cm, connection: 400V, 50Hz, 6kW Sturdy drying cabinet in full steel construction, with 5 drawers smoothly moving on ball bearings. Good air circulation, with thermostat and timer, with white plastic-coated plate on top, can be used as deposit place. Iisdpfeh Tymrjx Agysh

Condition: ready for operation (used), Year of construction: 2017, total height: 711 mm, total width: 864 mm, travel distance X-axis: 355 mm, travel distance Y-axis: 254 mm, travel distance Z-axis: 355 mm, product length (max.): 1,626 mm, number of axes: 3, This 3-axis Stratasys F370 was manufactured in 2017. It features a maximum build size of 355 x 254 x 355 mm and supports various materials including PLA, ABS, and PC-ABS. The machine includes four material spool bays for efficient operation. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys F370 plastic 3D printer we have for sale. Contact us for further details. Iiedpjzbhudjfx Agysh - Maximum Build Size (XYZ): 355 x 254 x 355 mm (14 x 10 x 14 in.)- Model Materials: PLA, ABS-ESD7, ABS-M30, ASA, Diran 410MF07, FDM TPU 92A, PC-ABS, ABS-CF10, QSR Support material- Layer Thickness: Geometry/Material dependent (0.330 mm, 0.254 mm, 0.178 mm, 0.127 mm)- Material Delivery Options: 4 material spool bays (2 for model, 2 for support) located in a drawer on the front of the unit- System Size: 1626 x 864 x 711 mm (64 x 34 x 28 in.)- System Weight: 227 kg (500 lbs) with consumables- Noise Specification: 46 dB maximum during build, 35 dB when idle- Accuracy: +/- 0.2 mm (.008 in) or +/- 0.002 mm/mm (.002 in/in), whichever is greater- Network Connectivity: Wired TCP/IP (100 Mbps minimum, RJ45), Wireless-ready (IEEE 802.11n, g, or b)- Software: GrabCAD Print, Insight software license- Security Feature: ProtectAM technology (U.S. DoD STIG compliance powered by Red Hat Enterprise Linux software)- Power Requirements: 100-132V/15A or 200-240V/7A, 50/60 Hz- Only the touchscreen function is defective. However, the device can still be operated using a connected mouse.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 340 mm, scan area length: 150 mm, scan area width: 150 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg Iiodpeywg Sbjfx Agysh