Used Plate Drill for sale (16,870)

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 1-13 mm arm length: 100 mm workpiece height max.: 400 mm total power requirement: 3 kW dimensions of the machine ca.: 2.0 x 1,2 x 2,2 m bore spindle turning speed range: 0-3000 U/min boring spindle drive: 2,2 kW max. Y-axis travel: 550 mm max. Z-axis travel: 300 mm The machine has a 2.2 kW spindle motor with a 2-stage gearbox for drilling and tapping. Tsdpfx Aisz Hfl Tsrsd Table size is 100 x 50 cm Stroke length approx. 200 mm *

Year of construction: 2026, condition: new, NEW – - Ideal for removing sheets from your vertical sheet storage system. - For internal transport of sheets to a vertical or horizontal sheet dividing saw. - The continuously adjustable support surface can be precisely adjusted to the height of your sheet saw. - Sheets weighing up to 250 kg can be transported or pivoted by a single operator. Technical data: Support height Tjdped Tyaajfx Airod - vertical: approx. 120 – 340 mm - horizontal: approx. 890 – 1200 mm Maximum sheet size: 5200 × 2100 mm Load capacity: 250 kg Location: In stock at 54634 Bitburg - immediately available - Will be shipped within Germany for €90.00 net.

Condition: used, Year of construction: 2008, machine/vehicle number: 30655, overall weight: 5,500 kg, total length: 2,540 mm, total width: 2,290 mm, total height: 2,340 mm, FICEP P51 - CNC PUNCHING & DRILLING MACHINE FOR FLAT BAR AND PLATES | YEAR 2008 | 800 KN The Ficep P51 is a CNC-controlled punching and drilling machine for automated hole processing of flat bar and plates. Punching and drilling run in a single pass with automatic material feed - saving marking, re-clamping and handling on parts with many holes. CONDITION & HANDOVER Used machine from stock, year 2008, serial number 30655. - Condition and function are confirmed during the viewing or upon request. - Viewing possible by arrangement (no demonstration under power). - Service and reconditioning before handover by arrangement. FUNCTION & APPLICATION A hydraulic punching unit and an integrated drilling unit process the workpiece in one pass. A carriage with hydraulic, self-adjusting grippers and ball screw drive positions the material under CNC control (Ficep MINOSSE). Processes: punching, drilling, marking, countersinking and tapping. Tsdpfx Aiez Nyvysrod Typical applications: structural steelwork and connection technology as well as the fabrication of beams, brackets and frame structures with a high share of holes. TECHNICAL DATA - Manufacturer: Ficep | Model: P51 | Year: 2008 | Serial number: 30655 - Machine type: CNC punching and drilling machine - Punching force: 800 kN (approx. 80 t) | Punching units: 1 - Max. punching diameter: 46 mm | Material thickness (punching): 3-25 mm - Drilling units: 1 | Spindle power: 7.5 kW | Max. drilling diameter: 28 mm - Plate width: 100-500 mm | Plate length: from 100 mm, not limited by design thanks to roller conveyors - Workpiece weight: up to 100 kg (standard) / up to 250 kg (reduced positioning) - Travel: X 1,000 mm | Y 500 mm | Positioning speed: 20 m/min - Carriage drive: ball screw | Clamping: hydraulic grippers - Control: Ficep MINOSSE CNC - Frame: one-piece steel C-frame with integrated hydraulic unit, electrics, pneumatics and CNC unit - Machine dimensions (L x W x H): approx. 2,540 x 2,290 x 2,340 mm | Machine weight: approx. 5,500 kg SCOPE OF DELIVERY - 1 x Ficep P51 main machine (one-piece steel C-frame) - 1 x punching unit (800 kN) - 1 x drilling unit (7.5 kW) - 1 x carriage with hydraulic grippers and ball screw drive - 1 x Ficep MINOSSE CNC control unit - 1 x hydraulic unit (integrated in the machine frame) - 1 x safety light curtain LOGISTICS & LOCATION Location: Ulft (Netherlands), close to the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: new, Year of construction: 2026, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: You will receive a 24-month warranty with this machine. On request, we can also offer you a suitable loading ramp, a photoelectric cell for black detection, or the appropriate machine stretch film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thereby fully eliminating the “human factor.” As space-saving as a pallet wrapper with a horseshoe turntable and as robust as a closed system – these are the advantages of this machine, put in a nutshell! The electromagnetic brake allows you to precisely store the film tension for each program step (foot wrapping, upwards wrapping, head wrapping, downwards wrapping). Within the parameters of each program, you can also adjust the speed of the film carriage and turntable. Head wraps, foot wraps, and film overlap at the pallet end can each be programmed individually. This way, you can store customized programs for every packing scheme to achieve optimal wrapping results. Programs can be password-protected so that operators can only select from pre-set programs. Tjdpfx Aoz E Ilaoirjd Weighing 500 kg, this model is designed for loads up to 1200 kg. Our Profiline LP comes with a 1650 mm turntable as standard and can wrap pallets up to 2500 mm in height. Automatic pallet detection (via photoelectric cell) is standard, as are adjustable top and bottom wraps. This model is our recommendation if you have limited space but require a professional and robust pallet wrapper that can be optimally adapted to your needs. Would you like a higher mast, film pre-stretch, or an automatic film cut-off? Almost anything is possible with this machine! We are happy to configure this machine as a new unit with options perfectly matched to your requirements. About us: We believe that business is made between people! A supplier delivers the goods you order – a partner does more: they help you find the best products, support you in achieving your goals, and stand by you in case of problems and challenges! That is our conviction. For over 40 years and through four generations, we have been the partner of mid-sized companies for all matters concerning 'stretching and sealing.' Upon request, we are happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2024, ALZMETALL pillar drilling machine AX 3/S, drilling capacity in steel 40 mm, spindle speeds: 160-2250 rpm, short spindle MK3, spindle stroke: 120 mm, overhang: 293 mm, column diameter: 115 mm, machine table usable support surface: 514 x 360 mm, with T-slots 2 x 14 mm x 224 mm, distance spindle-table min./max. 117/701 mm, machine table height adjustment via hand crank, machine height without options: 1840 mm, net weight: 260 kg. Standard equipment: Main switch with locking mechanism Motor with thermal protection contact Mushroom push button (latching) for EMERGENCY STOP Speed adjustment, stepless Spindle guard with electrical protection Main switch Right and left rotation Protection class IP 54 Motor insulation class "F" (155°) Tedsz E Sqyspfx Airjd Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black including the following options: LED machine light, item no. 12. Digital drilling depth display Zero point setting (drilling start) 5-digit LED display, character height 13 mm, item no. 37.1 Delivery time: ex stock Waiblingen Beinstein The machine can be inspected at our premises by appointment.

Condition: used, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 450 mm, side roll diameter: 410 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 50 mm, sheet thickness copper (max.): 50 mm, overall weight: 23,000 kg, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, hardened rollers, Plate bending machine 3 ROLL HYDRAULIC MODEL 3000 X 40 MM - YEAR 1997 PLATE BENDING ROLL PLANETARY DESIGN PYRAMID DUAL PRE-PINCH Nameplate Bending capacity -Plate width : 3000 mm -Rolling plate thickness: 40 mm -Prebend thickness: 30 mm --- minimum rolling ID 550 mm depending on plate thickness and width Rolls dimensions: -Useful length 3100 mm -top roll D 450 mm -side rolls D 410 mm Accessories installed: Central upper support hydraulic control to hold the plate formed into large diameters Side arm hydraulic to support the large diameter being formed Conical bending attachment with hydraulic control of the angle setting for cone rolling, cone bending stopper hardened pad swing-down on the drop-end of the machine. Technical data Rolls hardening induction treatment, high strength surface of the 3 rolls Power driven total on the 3 rolls with axial gearbox and direct drive hydro-motor each roll Console electric on wheels with centralized commands joysticks and digital readout. Tsdpfx Asz H N Ifsirjd Digital readouts of the rolls position bending and pre-bending. Re-rolling system for welded shells rounding. Opening front side hydraulic drop-end to unload the closed shell. Variable speed working roll bending rotation hydraulic speed fast/slow. Voltage supply 3 phase Vac, electric power 40 Hp.

Condition: refurbished (used), Year of construction: 2017, BUCK TBFZ 3000 CNC incl. tools and clamping wedges Tedpfoz Ntr Iex Airjd The machine has been comprehensively overhauled and modernized. Conversion to Heidenhain iTNC530 including completely new control cabinet Travel: X-3000 mm, Y-1.500 mm, Z-1500 mm Z1: 500 mm A-axis: +/- 20° Depth of drilling in a single pass Z: 1.500 mm Drill depth by readjusting Z1: 2.000 mm Drilling performance with single-lip internal thread drilling tools: 3-40 mm diameter NC rotary table 360° B-axis: 2.500 x 2.300 mm max. Tischladung: 25.000 kg Internal coolant supply (IKZ): 70/100 bar Spindle drive power at 60%: 20.5 kW Express travel X/Y/Z: 15.000 mm/min Spindle speed: 0-6,000 RPM Control: Heidenhain iTNC530 tool holder: SK50 Space requirements: approx. 8.5 m x 8.5 m x 3.5 m machine weight: approx. 24,000 kg max. table load: 25.000 kg

Condition: reconditioned (used), functionality: fully functional, Drill press. Tsdpfjz Dp Akox Airod

Condition: reconditioned (used), functionality: fully functional, pillar drill for metal Tedpfoz Dp Aqsx Aired

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request Tjdpfxjz Hd R Ie Airod - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Condition: good (used), Year of construction: 2009, CN Heidenhain TNC 530 Travel X – 3000 mm Todpfx Aisz H Ui Uored Travel Y – 2000 mm Travel Z – 1200 mm Travel W – 730 mm CNC table 1600 x 1800 mm Max. workpiece weight – 15 t External coolant system, 4 nozzles Heidenhain rotary table with B-axis Heidenhain linear scale, X-axis – 3000 mm Heidenhain linear scale, Y-axis – 2000 mm Heidenhain linear scale, Z-axis – 1200 mm Spindle support 250 mm Safety guard

Condition: good (used), Indexable insert drills, high-performance drills with indexable inserts, solid drills, end mills, shank cutters, milling cutters, indexable insert end mills, end mills with internal cooling, indexable insert end mills, boring heads -Manufacturer: Amec, adjustable indexable insert drill Revolution Drill with internal cooling -Type: V Maxx R44x35-40M -Shaft diameter: 40 mm -Drill diameter range (D1): 66.0 mm to 71.1 mm (adjustable via cartridges) Tedpfsz Imzlsx Airjd -Drilling depth: 3.5 x D / Usable length approx. 253 mm -Reversible inserts: not included -Dimensions: Ø 63 x 355 mm -Weight: 5.0 kg

Condition: excellent (used), Year of construction: 2000, Description to follow! Tedpfxoz Ebqpj Aired

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal and manual buttons. Todoz Dtaaspfx Airsd Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings Tsdoz N Hxhspfx Aired - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: good (used), Year of construction: 1995, Max. cutting length 3050 mm Material thickness 37 kg/mm² 12 mm Material thickness 70 kg/mm² 8 mm Cutting angle 1.8 degrees Stroke rate 8 - 13 min. Number of hold-down clamps 12 Drive power 18.5 kW Dimensions L x W x H 4150 x 1950 x 1950 mm Weight 8000 kg Accessories / Special features: • ELGO Type 71 motorized NC positioning control for the backgauge, length approx. 900 mm • If necessary, the toggle lever system allows the machine to operate with only one cylinder at a reduced cutting capacity of approximately 55% of the nominal capacity. This simultaneously increases the cutting sequence for more efficient work with thin sheet metal. Switching from fast to slow is done using a selector switch on the control panel. Tsdpfx Aiovkw Dvjred • Hydro-mechanical drive via a powerful toggle lever • Easy cutting gap adjustment on both sides • 2 cylinders mounted externally on the machine, easily accessible • Vertical, stable guides • Upper and lower blades each with 4 cutting edges • Hydraulic overload protection • Proportional force of the hold-down clamps • The machine frame is a fully welded construction and is machined in one setup (no screwed parts) • Portable electric foot switch • Blades suitable for black sheet metal and stainless steel • Ball transfer units in the table • 1 angle stop • 1 support arm • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, 1 brand new hydraulic swing-cut plate shear (unused showroom machine) Manufacturer: LAMI NOVA Model: SC 2006 Max. cutting length: 2100 mm Max. sheet thickness, for normal steel: 6.5 mm Max. sheet thickness, for stainless steel: 4 mm Cutting angle: 1.5° Overhang: 350 mm Cutting speed: 29 / min. Drive power: 7.5 kW Dimensions L x W x H: approx. 2670 x 2000 x 1600 mm Weight: 4500 kg Accessories / Special features: Tedpfxod Ad A Es Airsd • NC control ELGO P 40 as an electronic positioning display for the motorized back gauge, length = approx. 800 mm, ball screw spindles • 1 heavy-duty angle stop with tilting cam, 1000 mm • 2 heavy-duty support arms • Large overhang of 350 mm for cutting longer sheet metal • Central shear gap adjustment • Cutting line illumination • Small, fixed cutting angle of 1.5° • Ball rollers in the table • Upper blade with 2 and lower blade with 4 cutting edges • Plastic feet for the clamping beam • Electric foot switch • Sheet metal slide at the rear • Oil filling • Hydraulics by BOSCH, DUPLOMATIK, REXROTH or OILCONTROL • Electrical system by SIEMENS, TELEMECANIQUE • Operating manual • CE compliant Delivery time: immediately, subject to prior sale plus additional freight costs China - Germany Exclusive representation! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, 1 brand new hydraulic oscillating shear Manufacturer: LAMI NOVA / Exclusive dealership! Model: SC 4006 Max. cutting length: 4100 mm Max. sheet thickness, for normal steel: 6 mm Max. sheet thickness, for stainless steel: 4 mm Cutting angle: 1.5° Overhang: 350 mm Cutting rate: 14 / min. Drive power: 7.5 kW Dimensions L x W x H: approx. 4630 x 2050 x 1700 mm Weight: 9600 kg Accessories / Special features: • NC control ELGO P 40 as an electronic positioning indicator for the motorized back gauge, length = approx. 800 mm, ball screw spindles • 1 heavy-duty angle stop with tilting cam, 1000 mm Todjd Ad Dbspfx Airsd • 2 heavy-duty support arms • Large overhang of 350 mm for cutting longer sheet metal plates • Central cutting gap adjustment • Cutting line illumination • Small, fixed cutting angle of 1.5° • Ball rollers in the table • Upper blade with 2 and lower blade with 4 cutting edges • Plastic feet for the hold-down device • Electric foot switch • Sheet metal slide at the rear • Oil filling • Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL • Electrical system SIEMENS, TELEMECANIQUE • Operating manual • CE compliant Fig.: with option! Delivery time: approx. 3 months after order receipt plus pre-carriage costs China - Germany Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Work table 54 cm x 135 cm Shipping dimensions: Tsdpfxsw N N D Ae Airsd Width: 135 cm Length: 160 cm Height: 230 cm

Condition: new, ALZMETALL column drilling machine Alzstar 23 S Manufacturer: Alzmetall Type: Alzstar 23 S Condition: NEW Drilling capacity steel E335 (St 60) 23 mm Thread cutting Steel E335 (St 60) M 14 Cast EN-GJL-200 (GG20) M 16 Short spindle MK 2 Spindle stroke 100 mm Thrust 250 mm Column diameter 90 mm Machine table, usable support 370 x 300 mm T-slots, number x width x distance 2 x 14 x 160 mm Distance spindle-table min./max. 140/670 mm Hand feed Machine height without options approx. 1770 mm Net weight approx. 175 kg Drive stepless Motor 750 / 1500 rpm Power 0.6 / 0.95 kW Spindle speed rpm 225-4300 Tjdey S Avlspfx Airsd Standard equipment: Mushroom push button (latching) for EMERGENCY STOP Reversing switch for clockwise and counterclockwise rotation Motor protection switch Stepless speed adjustment Digital speed display Protection class IP 54 Connection plug (fully assembled, cable length 2m) Spindle protection with electrical fuse Paint: DD structural paint light gray RAL 7035, anthracite RAL 7016

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Tjdszgvmqepfx Airsd Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Condition: Very good, used but like new Available immediately from stock.

Condition: like new (used), Year of construction: 2020, Donau Flex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Type: Flex 135 High-Speed Radial Drilling Machine Condition: used, very good to like new Year of manufacture: 2020 Stepless speed control Stepless quill feed Tjdezza Nxjpfx Airsd Threading device Dimensions and travel ranges Tool holder: MK 4 Column diameter mm: 170 Table dimensions mm: 1200 x 600 Number of T-slots: 4 Distance between T-slots mm: 125 Quill stroke mm: 165 Column stroke mm: 450 Drilling capacity in solid steel 60 mm: 35 Cast iron 22 mm: 42 Threading steel 60 M 30 Cast iron 22 M 36 AC motor, frequency-controlled kW 4.0 at 100% duty cycle. Speed range: min-1 20 – 3200 Feed, stepless mm/rev: 0.02 – 0.7 Machine light Spindle guard

Condition: used, Year of construction: 2000, power: 1.5 kW (2.04 HP), input voltage: 400 V, type of input current: three-phase, KNUTH KTB 32 Column Drilling Machine – 32 mm, 400 V For sale: KNUTH KTB 32 industrial pillar drilling machine, manufactured in 2000. Heavy-duty floor-standing column drill with belt drive, adjustable worktable, and mechanical speed adjustment. Suitable for drilling operations in metalworking workshops, maintenance departments, and production facilities. Technical specifications: Tjdpfx Aisz R Dy Serjd Manufacturer: KNUTH Model: KTB 32 Year of manufacture: 2000 Serial number: 0002017 Maximum drilling diameter: 32 mm Motor power: 1.5 kW Power supply: 400 V, three-phase, 50 Hz Spindle taper: MT3 / MK3 Approximate dimensions (L × W × H): 800 × 500 × 1800 mm Approximate weight: 140 kg Drive: Belt-driven Worktable: Height-adjustable Quantity: 1 unit Condition: Used machine. The actual condition and included equipment are shown in the photographs. No specific functional test results are provided. Location: Gatciems, Latvia. Inspection is possible by prior arrangement. Loading assistance is available. Transport within Europe can be arranged upon request. MixStock reference: 50026-26

Year of construction: 2016, condition: good (used), Approx. 4 – 5 used plate heat exchangers, Funke, FP. 16-75-1-NH-0: Todpjz Sdypofx Airjd Price per unit, ex works: €550.00 (net)! Manufacturer: Funke Type: FP. 16-75-1-NH-0 Serial number: 0823902 Year of manufacture: 2016 Condition: good Availability: immediately Location: Bünde, North Rhine-Westphalia

Condition: new, 18 mm M 12 M 14 MK 2 225-4.300 U/min. spindle stroke 80 mm throat 190 mm column diameter 65 mm 300x240 mm 2 x 12 x 80 mm 75/357 mm Tedpfxozz Aihj Airjd 300x240 mm 2 x 12 x 80 mm 437/437 mm feed von Hand Handkurbel total power requirement 0,37/0,55 kW Machine height 840 mm