Used Plunge Pool for sale (209)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Godpfx Aasw U Ry Notobt Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Condition: excellent (used), AGATHON 150 SL2 Centerless cylindrical grinding machine TECHNICAL DATA Working wheel: Diameter: 150 mm width: 50 mm Bore: 50 mm Regulating disk: Diameter: 100 mm Width: 50 mm Bore: 40 mm Workpiece diameter: Minimum: 0.1 mm Maximum: 12 mm Max. Length for plunge-cut grinding: 49 mm Weight: 750 kg Connected loads: 3 X 380 V / 50 Hz Compressed air: 5-6 bar Dimensions: Machine: 1000 x 500 x 880 mm Electrical cabinet: 1550 x 540 x 420 mm Coolant tank: 750 x 550 x 700 Gedpfx Aor Hdi Aeatjbt SCOPE OF OFFER U.A: (list not exhaustive): Grinding wheels regulating wheels Spare flange mandrel Grinding pads Complete operating documentation Exact scope of offer according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided.

Year of construction: 2003, operating hours: 4,689 h, condition: reconditioned (used), functionality: fully functional, 2023 comprehensively overhauled: - Spring assembly spindle renewed - Rotating union renewed - trackball renewed - Life support battery renewed - Graphic card regenerated - X-axis bearing new - backlash X-/Y-axis 0,015mm TECHNICAL DETAILS X travel: 1270 mm Y travel: 660 mm Z travel: 610 mm speed: max. 8.000 rpm table load: max. 1300 kg table size: 1500x660 mm tool changer: 24-fold/double arm tool holder: SK 40 DIN69871 Control: Ultimax 4 control MACHINE DETAILS spindle hours: 4.689 h, machine ran only 1 shift drive: 15 kW machine weight: approx. 9 t space requirement: approx. 4,8 x 4,5 x 2,95 m EQUIPMENT - Coolant system - Cooling through the spindle (IKZ) 20bar Gbedpel D Rubefx Aatot - chip conveyor - machine light - 2x color screens (working) - Removable electronic handwheel SOFTWARE - Pocket milling with islands - Synchronous tapping without compensating chuck - DXF software - 3D contouring software - Ultinet - Advanced Velocity Control - Plunge Ramp/Helix

Condition: new, Year of construction: 2025, functionality: fully functional, Cutting range: 5300 x 2240/2100 x 80 mm Cutting depth: 80 mm Motor power: 5.5 kW Continuously adjustable scoring unit EPS.X – Electronic positioning system for the X-stop 12" touchscreen display Saw Frame • Manufacture of precision components to 1/100 mm accuracy • Solid, self-supporting, permanently welded, torsion-resistant saw frame • TRK1 full-surface support wall made of birch plywood with integrated small parts support • Auxiliary stop profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of central support • Automatic roller locking during cutting Saw Beam • Stable, durable steel construction of the saw beam • Automatic saw beam locking with interface detection Saw Unit • Play-free, easy-running guides • Robust bearing of the motor carriage ensures high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Increased operator comfort thanks to largely automated operation • Laser-assisted display for horizontal cuts • Automatic motor carriage clamping • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for easy switch-over to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake • ProLock Easy-Fix tool clamping system Control • 12" touchscreen control panel with optimized user guidance • Multilingual user interface • Tool database for maximum flexibility and repeat accuracy • Fully automatic cutting process • Infinitely variable feed speed from 10–25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity • UPS 24VDC for touch PC (uninterruptible power supply) • Automatic saw beam positioning (ASP) Gjdpfx Aaoyx H Dtetebt Dimension Setting • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design, Ergonomics • Typical STRIEBIG product design • Multiple award-winner (including the Design Prize Switzerland) • Ergonomically optimized for function and user Installation • Wall-mounted or free-standing installation possible

Year of construction: 2007, operating hours: 16,500 h, condition: good (used), functionality: fully functional, machine/vehicle number: NH631GF0405, LPP System (Linear Pallet Pool) automation system with 12 pallets only 16,500 spindle hours TECHNICAL DETAILS travel X / Y / Z: 1050 x 900 x 980 mm B-axis: 360 Control: MSX-701 Maps 3 speed: 8000 rpm tool holder: BT 50 number of tool places: 140 number of pallets: 12 table clamping surface: 630 x 630 mm table load: 1500 kg Gsdpfxsmfrtws Aatsbt MACHINE DETAILS dimensions: 3,37 x 5,97 x 3,41 m weight: 19 t total power requirement: 64,7 kVA spindle hours: 16.500 Switch-on time: 127.000

Condition: used, Grinding wheel dimensions (od x id x width): 610 x 355 x 304.8 mm Min/max diameter to be ground: 2 / 150 mm Regulating wheel speed steps: infinite Min/max regulating wheel speed (rpm): 10 / 225 rpm Dressing (auto/manual): Automatic - CNC Lubrication (auto/manual): Automatic Control type (CNC/manual): CNC Gjdjydqfwspfx Aatebt CNC brand: FANUC CNC model: Oi TD Plunge (auto/manual): Automatic Regulating wheel dimensions (od x id x width): Ø350 x Ø203.2 x 355 mm Maximum plunge grinding length: 355 mm Coolant motor power: 0.70 kW Grinding wheel head motor power: 37 kW Total power: 45 kW Voltage: 220/380V Length: 1,165 mm Width: 3,398 mm Height: 1,700 mm Weight: 14,000 kg Accessories: Inline loader, Coolant filter, Supporting rulers

Condition: used, Year of construction: 2006, Milling spindle unit SEMA SE 100, e.g. for the production of crankshafts Spindle mounting: flange Speed with this gearbox: 97 rpm Spindle designed for up to 3000 rpm Drive power, currently: 22 kW The milling spindle is designed for up to 25 kW Bearing diameter: 110 mm Gjdpjddzi Aefx Aatebt Disc cutter SANDVIK Ø 700 x 25 mm Plunge depth of the disc cutter: 235 mm Accessories / Special features: - Disc cutter SANDVIK Ø 700 x 25 mm - Lubricated-for-life spindle bearings - Robust construction with hardened and ground spindle - High precision - 2-fold bearing of the spindle with 5 spindle bearings - WZ clamping via flange Original new price at the time: approx. €34,500.00 net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Thread rolling machine, cold rolling machine, thread forming machine, profile rolling machine Manufacturer PEE-WEE, Type P 24 Q Serial No. LC2403099, Year of manufacture 2004 Rolling force, max. 24 tons Tool diameter, max. 200 mm Rolling spindle diameter 69.85 mm Tool bore diameter 70 mm (nominal diameter) Receiving length, tool length, max. 180 mm Workpiece diameter, max. 50 mm Gbedpfx Ajh A S Hteatst Rolling spindle speed 22 - 44 - 95 - 190 RPM Hydraulic motor power approx. 3 kW Rolling drive motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Swiveling rolling spindle for thread through-rolling - Rolling spindle speed in 4 stages via gear change - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons Good condition Plunge rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The thread length is a maximum as long as the rolling tools are wide. Through-rolling tools: If the thread length is greater than the rolling tool width. Through-rolling tools have 3 sections - the inlet, the calibrating section, and the outlet. Grooved rollers have no pitch and are swiveled with the helix angle of the profile to be rolled. Helix rollers differ from grooved rollers by having a pitch in the profile. The sum of the helix angle and the swivel angle results in the helix angle in the workpiece.

Condition: used, O F F E R We can offer you ex stock, subject to prior sale and errors: TSCHUDIN (CH) Centerless cylindrical grinding machine Model TC-300 Year of manufacture 2001 Grinding range – Ø 0.5 – 25 mm (30) Max. workpiece length for plunge grinding 125 mm (140) Max. workpiece length for through-feed grinding 300 mm Grinding wheel dimensions: Ø x width Ø 300 x 125 mm (140) Regulating wheel dimensions: Ø x width Ø 225 x 125 mm (140) Grinding wheel peripheral speed 35 m/sec Grinding wheel infeed 3 mm Regulating wheel speeds, steplessly adjustable 0 – 444 rpm Regulating wheel inclination Degrees Grinding wheel drive approx. 7.5 kW Total connected load approx. 13 kW – 380 V – 50 Hz Weight 2,500 kg Accessories / Special equipment: • The machine operates with a fixed workpiece position, allowing both the grinding spindle and the regulating spindle units to be adjustable. This simplifies machine setup as well as automatic workpiece loading and unloading. • SIEMENS PLC control for automatic operation with SIEMENS touchscreen. Complete electrics and PLC control renewed in 2016! • Electromechanical profile dressing device for the regulating wheel • Regulating and grinding wheel speeds are steplessly adjustable. • Adjustable plunge guide bridge with mounted plunge workpiece rest • Electromechanically controlled workpiece pusher & automatic pneumatic workpiece ejector • Additional outfeed cylinder for automatic tilting of workpieces after plunge grinding (adjustable 4–30 mm) • Machine is prepared for use with a HELP-TEC bar loader MSHL08/400P, which is currently not present. • Complete enclosure of working area with monitoring technology • Separate control cabinet, operating and electrical manuals for the retrofit Condition: Very good! Fitted with new electronics in 2016! Click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – after receipt of invoice Always a large selection of grinding machines in stock – please inquire for your requirements! Gbjdpfx Aaswftt Uotet

Condition: used, Single-acting hollow piston cylinder with spring return ENERPAC Hydraulic ram, hydraulic cylinder, hollow piston cylinder, machine lifter, clamping cylinder Model: BRH 1003, predecessor of RCH 1003 Lifting capacity: 100 tons Operating pressure: 700 bar Piston stroke: 76 mm Piston rod diameter: 127 mm Outer diameter: 215 mm Closed height: 255 mm Gbedpfx Aaoxciuaotet Through-hole diameter: Ø 79 mm Internal thread: Ø108 mm 12G" Hydraulic connection thread on cylinder: M18x1.5 - Hydraulic connection with high-flow quick-coupling type CH-604, thread M30x1.5 mm Net weight: 55 kg Very good condition 16 units available, price per unit

Condition: used, Grinding wheel dimensions (OD x ID x width): Ø508 x Ø304.8 x 305 mm Min./max. diameter to grind: 150 mm Grinding wheel width: 305 mm Maximum plunge grinding length: 305 mm Regulating wheel dimensions (OD x ID x width): Ø330 x Ø203 x 305 mm Godpfxsydz S Ue Aatjbt Regulating wheel motor power: 4 kW Grinding wheel head motor power: 37 kW Total power: 45 kW Length: 3,500 mm Width: 2,500 mm Height: 1,100 mm Weight: 6,500 kg

Condition: good (used), Item: J-10505-Dairy Ice Cream plant Godpsiiyu Hjfx Aatjbt Complete Ice Cream plant for diverse Ice Cream products, very nice condition. EU Capacity: - Tetra Pak Straight-line - Stick Bars. 5.000 pcs/h - Tetra Pak Comet, 5.000 pcs/h Plant consisting on: Pasteurization line Split system with capacity 1.000 l/h Tetra Pak Hoyer Frigus 600 Tekno Ice Frigus 600 - 3 pieces Ice Water pool Technofreeze CVT 30 Double Jacketed Tanks 1.000 L - 5 pieces Air Screw Compressor Gas Heating

Condition: good (used), Grinding wheel dimensions (OD x ID x width): Ø406 x Ø229 x 254 mm Min./max. diameter to be ground: 125 mm Grinding wheel width: 254 mm Max. plunge grinding length: 254 mm Regulating wheel dimensions (OD x ID x width): Ø280 x Ø165 x 254 mm Grinding wheel motor power: 30 HP Total power: 34 HP Approx. weight: 5,500 kg Dimensions: 2,600 mm length x 1,200 mm width x 1,200 mm height Gsdpfew R Rrqex Aatobt

Condition: good (used), Milling chuck, boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, universal drill head, boring tool, face head, facing and boring heads -Manufacturer: Komet microbore twinbore, milling heads, facing and boring heads with countersinking tool -Type: various designs, see photos Gbodsu S Tbhspfx Aatot -Comet: Type AB/VD 80 / AB/V 63x85 / AB/FZ 63 / AB/FZ 40 / AB/FZ 25 / FZ 32-100-3 / 2x AB/ISO 40x63x50 -Comet: Type AB/VD 63 / AB/VD 40 / AB/FZ 80 / AB/V 40x60 / AB/VD 50 / AB/V 25x60 / AB/VD 25 ... -twinbore: microbore MTP-75-1 / MTP-75-80 ... -Price/Fee: complete -Dimensions of transport case: 715/365/H210 mm -Total weight: 72 kg

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 32461/2384, Manufacturing origin Swiss Voltage 380 / 50 / 3 Netweight 4900 lbs Dimensions 121 x 69 inches TECHNICAL DATA Nominal distance between centre 600 mm Max. distance between centres, headstock and tailstock projecting 750 mm Height of centres, standard 125 mm Height of centres by means of raising blocks for work head-and tailstock 175 =ᐳ 250 mm Max. swing diameter with 125 mm height of centres 250 mm Max. swing diameter with raising blocks 350 =ᐳ 500 mm Table swivels each side 10° Max. lenght for surface grinding (width=200 mm) 900 mm Gsded Amifepfx Aatebt Table speed infinitely viable by hydraulic drive, approx. .. 6 m/min Dwell of table reversal 0 - 5 sec. Grinding wheel for cylinrical grinding (diameter x width x hole) 350/400x50x127mm Grinding wheel for surface grinding diameter x width x hole 250 x 13 x 76 Speeds of grinding wheel spindle 1500/1700/2200/3600 Grinding wheel head swivels 270° with indexed stop each 90° Vertical movement of grinding wheel head, height of centres -350 mm Cross movement of grinding wheel head 285 mm Rapid advance and withdrawal of wheelhead 40 mm Intermittent infeed per reversal of table 0,001-0,03 mm/dia Infeed for plunge grinding 0-0,9 mm/dia Micro-corrector of infeed, 1 division of dial 0,001 mm/dia Swivel of work headstock 360° work speeds infinetely viable, normal/special 20-400/10-400 Internal taper of headstock/tailstock 5/3 Morse Grinding wheel motor, approx. 4 HP errors and omissions excepted data given without obligation Inventory Nr.2170089, machine equipped with : 1 Workpiece headstock MT5 1 sinus rule without comparator 1 Wheel headstock with 4 pulleys 1 Tailstock MT3 1 Collet clamping device with drawbar and reduction sleeve B32 1 Internal grinding device with quill Fischer UJ50x250 – pulley Ø 48 for 14000 min-1 1 Pivoting wheel trueing-up device with sole 50 mm 1 Table’s pivoting stop without comparator 1 Cooling device through decantation 1 extractor 1 balancing stake

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 196520 € 3714.23 € 2000 mm 730 mm 2000 x 600 mm 2x 1000 x 600 mm 2100 mm 5 - 30 m/min 0 - 2250 mm/min mm 685 mm 0 - 675 mm/min 0.001 - 0.04 mm 560 mm 500 - 2200 1/min 11 kW 5.5 kW 6225 mm 07 mm 2305 mm 6530 × 00 ×3350 (brutto mm Gjdpsxpizmjfx Aatebt 10200 kg 1600 kg 1150 kg 1600 kg Dm. 405 x 75 x 127 mm je 3,1 kW 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list Max. table speed 30 m/min Integrated machine body temperature control Turbide-coated double V-guides Hydraulic table drive with cooling Linear guides with recirculating ball screws and AC motors for precise positioning in the X and Z axes Automatic lubrication with a pressure switch for automatic stop in case of pressure drop Electro-magnetic chuck 2x 1000 x 600 mm Coolant system with automatic paper filter and magnetic separator (500 l) Automatic dressing device mounted on the table, without diamond, with automatic compensation Grinding wheel flange with 1 grinding wheel Grinding wheel balancing stand LED machine light Machine and equipment according to CE regulations Operating manual in GERMAN or ENGLISH OPTIONS (PRICES ON REQUEST): Complete enclosure of the work area Oil mist extraction

Condition: good (used), Manufacturer ESTARTA Model 301 MV Condition Used Stock number 4576 Location Badajoz, Spain Dimensions 1520x1020x1260mm Weight 1550 kg Opening between grinding wheels 1,5/50mm Max. grinding wheel width in plunge grinding plunge 125mm Gbjdpfer Ezfpjx Aatet Dimensions of the working wheel (od x id x width) 300x125x175mm Øext.min. working wheel working wheel 220mm Max. depth of profile of working profile depth 8mm Dimensions of the driving wheel (od x id x width) 220x125x125mm Øext.min. of driving wheel drive wheel 165mm Max. depth of profile of the driving wheel profile depth 8mm Grinding wheel motor power motor power 7,5Kw Motor power of grinding wheel driving motor power 0.75Kw Tilting angle angle of working working +/- 5º

Condition: used, Grinding wheel dimensions (OD x ID x width): Ø406 x Ø229 x 254 mm Min./max. diameter to be ground: 125 mm Grinding wheel width: 254 mm Max. plunge grinding length: 254 mm Regulating wheel dimensions (OD x ID x width): Ø280 x Ø165 x 254 mm Grinding wheel motor power: 30 HP Total power: 34 HP Approx. weight: 5,500 kg Dimensions: 2,600 mm length x 1,200 mm width x 1,200 mm height Gbjdpfxsydy Emj Aatst

Condition: new, Year of construction: 2024, functionality: fully functional, type of input current: AC, total height: 345 mm, total width: 180 mm, total length: 470 mm, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 12 months, type of cooling: air, hose package length: 4,000 mm, electrical fuse: 12 A, welding current at 60% duty cycle: 220 A, protection type (IP code): IP23, Equipment: documentation/manual, type plate available, MICRO-IMPULSE WELDING UNIT MICROSPOT FOR MOLD REPAIR Gbedpoxzrv Refx Aatot Fully digital: The completely digital welding current source MICRO SPOT allows for almost completely unrestricted shaping of the weld pulse in the millisecond range when setting parameters. Fully functional: The MICRO SPOT is not only the first and only repair welding unit with digital pulse shaping, it is also one of the most advanced digital power sources for: - TIG DC welding (2-stroke or 4-stroke) - TIG AC welding (2-stroke or 4-stroke) - TIG AC welding (2-stroke or 4-stroke) with automatic ball formation - MMA DC+ welding - MMA DC- welding - MMA AC welding Fully creative: Depending on the task and material, the “Creative Pulse Modulation” allows influence over the weld pool by means of oscillation superposition, soft or steep pulse rise, gentle pulse fade-out or abrupt pulse cut-off, etc. Fully intelligent: - Anti-stick function - Automatic post-flow gas (weld current dependent) - Automatic ball formation - Touch or HF ignition - Digital welding process control - Energy-saving inverter technology - Earth fault monitoring - Remote controllable via foot switch or torch - Gas test function - Generator-compatible - Job mode and job editing - Microprocessor control - Polarity reversal and RPI ignition - Welding current flow signal - Flow monitor for torch cooling - Temperature-controlled fan - Overtemperature protection Technical data: Mains voltage: 230 V Welding current: TIG: 3 – 220 A Electrode: 3 – 180 A Dimensions LxWxH mm: 470/180/345 Weight: 16.5 kg Protection class: IP 23

Condition: new, Year of construction: 2025, The EQPB BabyPress is a hydraulically operated benchtop model with CNC control. It is a robust and low-noise machine, specifically designed for the production of small parts. All manufacturing processes, from the hydraulic cylinder to the control cabinet construction, take place in-house. The advantages: - Basic design as a C-frame - Compact benchtop model - Ideal for prototypes and small series - Very short setup time - Functionally simple - Wide range of applications Standard basic design: - Upper slide guidance with high-precision roller guidance - Mechanical tool clamping system Promecam - Narrow table with individual V-tool holder (13x20) - CNC control Delem DA-41T - Y-axis CNC-controlled for programmed plunge depth calculation - X-axis CNC-controlled, 170 mm travel - R-axis manual - Low noise level - Low power consumption - Easy operation Technical data: - Press force 62 kN - Working length 285 mm - Clearance between the frames 230 mm - Installation height 215 mm - Overhang 70 mm - Ram stroke 100 mm Ram speeds: Gbjdoglkfpjpfx Aatot - Pressing stroke max. 9.8 mm/s - Retraction max. 50 mm/s - Motor power 0.7 kW - Main dimensions (W x H x D): 900 x 1,300 x 550 mm - Machine weight approx. 0.25 t - Tank capacity (hydraulic oil) 10 l Optionally, we also offer this machine without CNC control and/or with a press force of 12 t; please contact us for this.

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and Gbsdpfxeu R Syij Aatst and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Year of construction: 2026, condition: new, Suitable for automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools, and optionally profile tools using the disc electroerosion process. Accessories: Total enclosure, SK 40 or 50 workpiece carrier according to preference, Cooling unit for dielectric, Automatic fire extinguishing system, Measuring probe, SK 40 or 50 measuring mandrel depending on workpiece carrier, Alphanumeric keyboard for data management, Software package for peripheral machining of end mills and jointing cutters, linear machining in all common axis directions, Software package for compact and radius machining, profile cutters in path-travel and plunge-cutting processes, Software package for profile tools, 4-path program for peripheral electrodes, Software package for circular saws for complete machining of tooth backs and flanks of all common geometries, Automatic central lubrication, 1 short dressing holder, 1 mounting flange for erosion wheel. Machine is brand new!! Originally packed and full warranty from Vollmer! Cutter outer diameter: max. 250 mm Shank tool diameter: from 10 - 100 mm Outside diameter of disc-shaped tools: 380mm cutting length: Max. 20 mm Gbjdpey T It Eofx Aatot Cutting length: Max. 20 mm Tangential clearance angle: max. 6 ° Radial clearance angle: -15° to + 6° Chamfering: automatic max. 70° X axis travel: 280 mm Z-axis travel: 330 mm workpiece carrier cone: SK 50 Y axis travel: 280 mm Workpiece carrier cone: SK 50 A-axis rotation range: 360° B-axis swivel range: +/- 30 ° Tool weight max: 20 kg clearance angle: 30° Dimensions L x W x H: = 1905 x 2520 x 2430 mm Connected load: 3.4 kW (400 V / 50 Hz) colour: grey RAL7045 / RAL 7047 Diameter of rotating electrode: Max. 150 mm Rotational electrode speed: 80 - 1500 rpm weight: approx. 3000 kg

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 76980 € 1454.92 € 1015 mm 610 mm 1.000 x 400 mm 400 x 1.000 mm 1050 mm 5 - 25 m/min 0 - 2.250 mm/min mm 450 mm 480 mm 0 - 675 mm/min 0.001 - 0.04 mm 500 - 1.800 1/min 3.75 kW 1.5 kW 1.1 kW 1.1 kW 4280 mm 2080 mm 2100 mm 3500 kg 220 kg 440 kg Gedpfx Aswiqyajatobt 355 x 50 x 127 mm mm 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation * grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH * The exact configuration of the dresser must be clarified before ordering

Condition: used, Year of construction: 2001, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 400 mm max. width of grinding wheel: 400 mm grinding motor: 55 kW peripheral speed: max. 45 m/sec regulating wheel dimensions: 350 x 400 x 203 mm dimensions of grinding wheel: CBN 500 x 400 x 304 mm grinding wheel size: KORUND 600 x 400 x 304 mm total power requirement: 75 kVA weight of the machine ca.: 13 t. dimensions of the machine ca.: 4,47 x 2,77 x 2,49 m. Centerless Grindign Machine JUNKER JUPITER 500 CNC SIEMENS in good condition. Including: · 2 robots Kuka KR 16 Year 2007 · CNC loading and unloading device Promot EPL60NC Year 2007 The machine was lately used for grinding of guide bushes (through grinding). Plunge is possible. JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Gbodpfx Aottxg Isatet Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. *

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Gbedpfohp Rc Iox Aatet Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm