Used Plunge Pool for sale (498)

Year of construction: 2021, condition: new, cylinder diameter: 133 mm, Maximum Operating Pressure 700bar Capacity Class (tonnage) 200 Maximum Cylinder Capacity Advance (kN)1995 Stroke (mm) 152 Collapsed Height A (mm) 430 Extended Height B (mm) 582 Outside Diameter D (mm) 247 Dcjdpfxshhfa To Addjr Cylinder Bore Diameter E (mm) 190,5 Plunger Diameter F (mm) 133,4 Base to Advance Port H (mm) 57 Top To Retract Port I (mm) 96 Saddle Diameter J (mm) 133 Weight (kg) 147

Condition: reconditioned (used), Year of construction: 2009, operating hours: 15,334 h, functionality: fully functional, Europress EP 6500 V5 H4, Cross Tying, Year 2009, Fully Workshop Overhauled Technical Data: Manufacturer: Europress Type: 6500 V5 H4 Year of manufacture: 2009 Operating hours: approx. 15,334 hrs Number of bales: 138,097 Main press force: 120 t Specific press force: 142 kg/cm² Feed opening dimensions: 1,650 x 1,100 mm Fill volume: 3 m³ Filling volume per press cycle: 1.58 m³ Bale dimensions: 730 x 1,100 mm Drive power: 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Total connected load: 83 kW Current consumption: 150 A Binding: 5-fold vertical, 4-fold horizontal, fully automatic Bale weights: 450-900 kg Hydraulic oil tank volume: 1,200 L PLC control: Siemens S7-200 Operator panel: Siemens touchscreen Press dimensions (assembled with hopper): 13,465 x 5,200 x 5,074 mm Transport dimensions (press only): 9,965 x 2,500 x 2,900 mm (L x W x H) Dcedpfxsw Rlf Ee Addsr Machine weight (press): approx. 28 t Overhaul Work Performed on the EP 6500 V5: - Completely de-rusted and repainted - Full renewal of the interior steel floor of the press - Overhaul of plunger (steel construction) - Complete overhaul of horizontal and vertical lance boxes - Full replacement of internal Hardox lining - All hydraulic hoses replaced - Both lifting cylinders renewed - Knives and counter-knives replaced - All hydraulic cylinders resealed and tested - All guide and sliding plastics renewed - Wire deflection pulleys replaced - Various cables and sensors replaced - Various electrical components (control cabinet) renewed - Complete check of electrical system/control - Full pressure test of hydraulic system Remarks: The machine has been overhauled, checked, and tested by us. You can find a video on our website or YouTube channel. Inspections, including powered operation, are possible at any time by appointment. On request, we are also happy to perform test runs with your material for a fee. For questions about the machine, you may also contact us by phone from Monday to Thursday, 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data refer to the manufacturer’s specifications. No liability is accepted for the accuracy of the information provided or for any possible errors. This offer is non-binding, subject to prior sale and can be revoked at any time. Inspection possible by appointment. Sale is ex location, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2016, operating hours: 29,000 h, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, The offered Mitsubishi MP2400 from 2016 represents an excellent opportunity for companies engaged in or upgrading to high-precision wire EDM machining. With a total operating time of approximately 29,000 hours, the machine is in very good condition and fully operational. Demonstration or test runs are available, allowing interested parties to gain a direct impression of the machine’s condition and performance. Machine data & technical features Series specifications: • Control unit: Advance Plus2 • Max. workpiece dimensions (W × D × H): approx. 1050 × 820 × 305 mm • Max. workpiece weight: approx. 1,500 kg • Table dimensions: approx. 840 × 640 mm • Travel distances (X/Y/Z): approx. 600/400/310 mm • Wire changes possible between Ø 0.05 / 0.10 / 0.20 / 0.25 mm • Linear shaft motor drive system offering supreme precision in the micron range (MP denotes the precision package) Dcedpfxjxztuho Adder Special features of this machine: • Operating time: approx. 29,000 hours • Condition: very good, fully functional, demonstration possible • Integrated CAM system directly on the machine (machine programming) • 20-kg wire spool station for less frequent wire changes • Accessories (excl.): 8 clamping bars, various Erowa clamping devices, prisms and custom clamps, ionizer

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm Dcjdsw T Sc Nspfx Addsr TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: used, Year of construction: 2011, operating hours: 6,895 h, power: 140 kW (190.35 HP), Equipment: air conditioning, all wheel drive, cabin, front linkage, 1400. GW25BK40525, 50 km/h road approval, electric power shuttle, powershift transmission with automatic mode, air conditioning, automatic AHK K80/trailing hitch, front hydraulics/PTO, Quicke Q75 front loader, 4 electronic rear spool valves, load sensing, rear PTO 540/750/1000 rpm, suspended front axle with brake, air brake system, panoramic roof window, touchscreen control monitor, radio... and much more. Errors and prior sale reserved. Dcedpfx Aexucamjddsr

Condition: excellent (used), Year of construction: 1993, Müller Weingarten blanking line Pressing force 5,000 kN Stroke rate 15-60. rpm Stroke 255 mm Stroke adjustment 140 mm Installation height 930 mm Table surface 4,000 x 2,500 mm Plunger area 4,000 x 2,500 mm Dcsdsxz Hxaspfx Addsr Belt conveyor Belt width 500-2000 mm Belt thickness 0.5-2.0 mm Reel load capacity 30,000 kg

Condition: used, From € 216,00 now for € 194,40. Now with a 10% discount. Pallet offer consisting of 72 used plastic stacking bins E1 meat crates 600x400x125 mm 25 liters. These meat crates are the standardized crates for the meat processing industry, also called pool “E” crates and can be used between temperatures of -30ºC to +80ºC. Equipped with a Dodpfx Aovyqw Ioddscr

Condition: new, At Wöhler, we have developed a range of wire processing machines that are primarily used in the brush industry. They can roll round wire into flat wire, count and bundle individual wires and crimp or cut both individual wires and entire strands to a specific length. There are also solutions for rewinding or coiling and twisting individual wires into strands. Cut wire strands to an adjustable length and knot the sections into bundles with the Wöhler WCB 200. Dcsdpfoxzttkjx Addjr Produce Bucher tufts with the FWB 700. Roll round wire into flat wire with the FWR 250 - including automatic wire thickness regulation. Wind this flat wire onto spools with the DC 510, cut it to size and bundle the counted sections. Wave, cut and bundle wire strands with the DA 400 or the DA 700. Wave and wind wire strands with the STW 87, the STW 96 or the USTW 6000. Spool up to 44 individual wires into one strand - optionally including twisting. Get in touch with us. Together we will also find solutions for tasks not mentioned here.

Condition: like new (used), Year of construction: 1995, functionality: fully functional, center height: 225 mm, workpiece weight (max.): 100 kg, grinding length: 1,600 mm, CNC cylindrical grinding machine STUDER S40, year of manufacture 1995. The machine is in good used condition. Djdpfxot N Ivce Addecr Technical data: • Control: Fanuc Series 16-GC • Required space approx. (Height/Length/Width): 250 cm / 650 cm / 320 cm Axes: • Distance between centers: 1,600 mm • Center height: 225 mm • 4 axes (X, Z, B, C) • Max. workpiece weight approx.: 100 kg Equipment: • 2 grinding wheels + 1 internal grinding stone (selectable via control) • Face, plunge, internal, and cylindrical grinding • Magnetic chuck, three-jaw chuck, collets, between-centers grinding • Automatic dressing device • Steady rest • Resolution: 0.0001 mm • Polygon grinding • Static balancing unit • Grinding wheels available in corundum, diamond, and CBN • Cycle control • DXF import possible

Condition: used, TECHNICAL DETAILS - Workpiece diameter : 1 - 80 [mm] - Max. plunge grinding length : 140 [mm] WORKING GRINDING WHEEL - Minimum wheel diameter : 360 [mm] - Maximum wheel diameter : 508 [mm] - Grinding wheel width : 200 [mm] - Peripheral speed : 45 [m/s] - Grinding wheel speed : 1900 [rpm] REGULATING WHEEL - Grinding wheel width : 40 [mm] - Wheel tilt : +/- 7 [°] - Minimum diameter of drive wheel : 220 [mm] - Maximum diameter of drive wheel : 305 [mm] SUPPLY - Installed power : 30 [kW] - Supply : 400V, 50 [Hz] DIMENSIONS - Floor dimensions : 6000 x 4200 [mm] - Machine height : 3000 [mm] - Machine weight : 3100 [kg] Dsdpfx Ajxz Hrmoddecr EQUIPMENT - CNC SIEMENS SINUMERIK 840 D - Double slides for the plunge grinding wheel - Automatic loading through vibrating bowl

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Overhauled BRUDERER BSTA300 automatic punching press incl. new press control unit Dedpfx Adotvnlbsdocr Technical data: ----- Tonnage 300KN Die installation opening 750mm Stroke rate 80-1400 (depending on selected stroke) Adjustment stroke 13, 16,19,25,32,38,44,47 Plunger adjustment range 51mm Tool installation height 171-239 mm (depending on the selected stroke) Clamping plate 740x480mm Ram area 630x360mm Belt passage width 206mm Base plate opening 710x160mm Belt infeed height 50-120mm Belt direction left to right Feed Servo feed Machine weight approx. 5150 kg Machine color RAL 1013 pearl white Color attachments RAL 7016 anthracite Control cabinet color RAL 7035 light grey

Condition: refurbished (used), Centerless grinding machine ROSSI MONZA 410 Monzesi Grinding wheel width 200mm Grinding wheel diameter 400 pneumatic compensation auto plunge Dedpfxswf Rqde Addjcr overhaul - retrofit - PLC under power in our warehouse in Gussago BS (Italy) Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylinders, tapered rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, grinding wheels and setting discs have a negative workpiece profile to work which is given to them with the aid of a tool. Centerless through-feed grinding or through-feed grinding and longitudinal grinding: workpieces to be machined proceed continuously with axial feed through the grinding gap. Grinding wheel width: 200 Grinding wheel diameter: 400

Condition: excellent (used), machine/vehicle number: BAGJ01026, S. No.: BAGJ01026 Equipment / additional information: Dcodpfx Adoxugubjdsr Print Method: Inkjet Maximum Resolution: 2400 dpi (horizontal) x 1200 dpi (vertical) Printhead: PF-10 Number of Nozzles: 18432 nozzles (MBK/C/M/Y: 1536 nozzles x 2, PBK/PC/PM/GY: 1536 nozzles x 1) Minimum Paper Length: 203.2 mm (8.00 in) Maximum Printable Length: Rolls: 18 m (59 ft) // Sheets: 1.6 m (5.2 ft) Thickness: Rolls: 0.07-0.8 mm (3-31 mil) // Sheets: 0.07-0.8 mm (3-31 mil) Maximum Outer Diameter of Roll: 170 mm (6.7 in) or less Inner Diameter of Supported Paper Spool: 50.8 mm/76.2 mm (2/3 inch)

Year of construction: 2025, condition: new, Winder for spool´s up to 10kg gross weight with clamping conus and traverse guiding, Dodpodlpyuofx Addjcr adjustable speed and travelling width

Condition: used, Year of construction: 2007, Technical details of the machine Long-tube filling system with 40 filling valves and 8 KK plungers. Pre-evacuation system to reduce oxygen intake. Hygienic bottle table and stainless steel components for durability. Mechanical adjustment range: 3,000 to 15,000 bottles/hour. Performance range: 0.33l LN 3,000–13,500 bottles/h; 0.5l NRW 3,000–12,000 bottles/h. Low oxygen intake: max. 0.02 mg O2/l. Conversion parts for various bottle types (0.33l longneck, 0.33l Steinie, 0.5l NRW). Advantages of the machine The machine offers numerous advantages that enhance the quality of the bottling process. Smooth, product-friendly filling under CO2 atmosphere. 50–60% lower CO2 consumption compared to short-tube filling machines. High durability thanks to reinforced drive components. Hygienic design facilitates cleaning. Short changeover times. Djdpfx Aoxyuycjddocr Convertible to can filling according to the manufacturer (conversion kit not included).

Condition: new, mileage: 500 km, power: 335 kW (455.47 HP), overall weight: 25,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #511 Mercedes-Benz Arocs 2546 6x2 with combined high-pressure jetting and suction pressure tank superstructure, ADR Type K 14.0 / 28 PE Superstructure by KROLL Fahrzeugbau-Umwelttechnik GmbH * Tank material: S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle, Type K 14.0 / 28 PE * Telescopic plunger with 3 locking positions * (3,300 l water / 10,600 l sludge; 5,500 l water / 8,200 l sludge; 7,700 l water / 6,000 l sludge) * Suction from open bodies of water possible – "comfort version" with cassette boom and integrated filter * ADR tank equipment – category AT/FL L4BH * EMPTYING: by pneumatically operated piston * SLUDGE WATER DRAIN DN 80: for returning dirty water via the boom to the sewer. Vacuum system CVS VacuStar 1600 approx. 1,550 m³/h at 400 bar * Approx. 20 m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Parallel guidance of suction and high-pressure hose via boom * Hydraulic suction hose reel on the right with 30 m DN 75 (fully passable) Dedpfexc Sziox Addecr High-pressure system Uraca KD 718 approx. 315 l/min at 170 bar * Large HP hose reel for 240 m 1" DN 25, swivels 180° * Equipped with 160 m DN25 * Small HP hose reel for 80 m DN 13, hydraulic * Equipped with 80 m DN13 Special features of hose storage cassette with telescopic boom DN 125 * Infinitely variable hydraulic height adjustment of suction hose via roller carriage * Hydraulic and telescoping suction hose boom, swivels 180° * ADR version L4BH, category FL incl. EX/II, EX/III, and AT * Spray gun * LED beacon lights * LED area lighting * Remote operation of working functions via CAN-BUS technology * Radio remote control with 14 functions * Hand washing facility (heated) * Large compartment at the rear left, e.g., for a push camera * Rear-view camera with 7" color monitor incl. day/night mode * Sound insulation for pump compartment * Large equipment box * Toolbox * Holder for traffic cones * Vice * Ladder * Large advertising panels on right and left Special equipment: Chassis covers, axle load measuring device, front axle load 9.0 t, driver’s airbag, 220 Ah battery, battery disconnect switch, standard and DuoMatic brake connections, interactive multimedia cockpit, air horn, electrical pre-installation in cab 24V/100A, driver assistance systems: high beam assist and cornering light, traffic sign recognition, suspension: 9.0 t front springs, 4-leaf, tinted windshield with shading strip, ADR hazardous goods version type FL, 150 A generator, speed limiter system, 16-speed gearbox – type G 280-16, rear axle ring gear 300, cab air filter for construction vehicles, 3-piece mudguards, 3-piece mudguards with splash guards, 330 l aluminum fuel tank, left, cooling system for hot climates, trailing axle 9 t, steered, relievable, liftable, navigation system, power take-off – cross-splined flange, PTO gearbox-independent and clutch-dependent MB 1.65, programmable special module, frame lowering without residual pressure regulation, frame overhang 1350 mm, smoker package, rain sensor, tire pressure monitoring system, acoustic reversing warning and warning light (external alarm signal) For further detailed information and/or photos, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Modifications and interim sale excepted.

Year of construction: 2020, operating hours: 1 h, condition: as good as new (ex-display), Pressure washer PTC Easypower B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet, Kärcher, Dibo, - Operating pressure: 500 or 700 bar - Delivery rate: 21 or 15 l/min. - Engine: Vanguard 31 HP Stage V petrol 31PS/23kW, 3400 1-min - Dimensions: 1.000 x 820 x 850 mm - Empty weight: approx. 190 kg - High pressure pump: Comet TW 500 Premium three-plunger pump with ceramic plungers - Gearbox with 1560 1-min. pump - High quality painted steel frame with corrosion protection - Stainless steel covers Dedpfxefdz Eye Addocr - Holding device for pistol with lance - Trolly with 4 pieces industrial wheels 350mm - Electric starter - Operating hours counter - Stepless pressure valve made of stainless steel with EASY-START - Large water filter with easy to maintain filter cartridge - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle 15 The following models are available: Easy Power B 21/500 | 21 l/min 500 bar Easy Power B 15/700 | 15 l/min 700 bar

Condition: new, Year of construction: 2024, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands Dcedpfx Adju Hz Tqodor

Condition: excellent (used), Year of construction: 2015, Roll pressure infinitely adjustable from 117 kN feeds - fine adjustment 0,5-45 mm/min turning speeds 0-80 U/min Swivel angle of the roller heads 11 ° Diameter of the roller spindles 69,85 mm Stroke - Roller screw slide 0-150 mm min. dist. - roller screws 138 mm max. dist. - roller screws 285 mm min. diameter - Rolling tools 230 mm max. diameter - Rolling tools 135 mm min. dia. 2 mm max. diameter 55 mm thread length at plunge operation 200 mm thread length at continiuous operation 2000 mm maximum thread pitch 4 mm total power requirement 14 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 2,5 x 1,9 m Rolling time continuously adjustable from: 0.1s Pause time continuously adjustable from: 0.1s Rolling spindle length: 200mm Machine bed height: 810mm Rolling spindle height above machine bed: 200 mm Height of support bearings: 115 mm Dcjdpfexukrqox Adder Largest pitch for serrated teeth: 2.5 mm (up to 70 kg/mm2 Strength of the material)

Condition: excellent (used), Year of construction: 1990, pressing force: 5 t, table width: 400 mm, table length: 340 mm, overall weight: 400 kg, reverse speed: 360 mm/s, type of input current: three-phase, working height: 385 mm, stroke length: 150 mm, input voltage: 200 V, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressure speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate Two-hand operation Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 Dcsdswin Emspfx Addor If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 Dcjdpfx Aowix Hhjddjr workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *

Year of construction: 2021, operating hours: 1 h, condition: as good as new (ex-display), High pressure cleaner PTC CJ-2B similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 130 bar - Flow rate: 32 l/min. - Engine: Honda GX390 petrol 8,7kW - dimensions: 1160 x 580 x 710 mm - Empty weight: approx. 80 kg - High pressure pump: Comet three plunger pump with ceramic plungers - Robust steel frame - Practical holding device for gun with lance - Pressure gauge - Built-in professional relief valve - Manual stainless steel hose reel with 30 m HP hose 3/8" + 10 m HP hose 3/16" - 2 pieces 3/8" and 1 piece 1/8" F pipe cleaning nozzles Dcedpfx Adsgigqxsdsr - Gun with wash lance and flat spray nozzle The CJ-2B is a professional mobile pressure washer ideal for cleaning and unclogging pipes 40 to 200 mm. Ideal for cleaning and removing pipe blockages from house connections, cesspits, cisterns and industrial waste. The powerful Honda engine with a power of 8.7 kW and the Comet TW Premium pump with speed control guarantee maximum performance and reliability over time. This machine represents the optimal solution for professionals looking for an efficient and powerful machine, able to face the most demanding work situations thanks to the robust steel frame and the large pneumatic tyres.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 5 t, table width: 400 mm, table length: 340 mm, overall weight: 500 kg, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate oil cooler Voltage 3 phase 200v 1.5kw 10A Dcsdpfx Ajv Sd S Njdder Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, * Dcodpfxewix E Re Addsr

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, Djdpfxepumdco Addscr TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *