Used Plywood Press for sale (13,077)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform Kdsdpszu Ryhsfx Ab Hsr • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: good (used), Year of construction: 2007, operating hours: 10,490 h, functionality: fully functional, Channel baling press Presto HPK 20/50 S, year of manufacture 2007 Manufacturer: Presto Type: HPK 20/50 S Year of manufacture: 2007 Operating hours: 10,490 (as of 08/2026) Ksdpfx Abezvbbre Hodr Drive: 22 kW Pressing force: 50 t Feed opening: 1200 x 700 mm (L x W) Channel cross-section: 700 x 750 mm Feed volume, max. 0.63 m³ Cycle time: 23 s Tying: 3-fold, automatic Throughput capacity at 35 kg/cbm: 2.9 t/h 60 kg/cbm: 4.3 t/h 100 kg/cbm: 6.3 t/h Bale weight: up to 450 kg Machine dimensions: 760 x 1350 x 2350 mm (L x W x H) Machine weight: approx. 7,500 kg Materials: paper, cardboard, film Note: The press is in good condition and is currently still in operation. An inspection is possible by appointment. The machine will be available from the end of 2026. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. The sale is made against prepayment, ex works, without warranty.

Condition: ready for operation (used), Year of construction: 2012, Brand: DIXI Model: 60 SD Year of manufacture: 2012 Pressing force: 60 tons Voltage: 400 Kodjzuxrxjpfx Ab Hedr Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Dimensions of the feed opening: 115 cm wide x 80 cm deep x 55 cm high The DIXI 60 SD features simple operation, an automatic start function, and automatic bale ejection. Thanks to its compact, low-profile design, this machine is ideal for spaces with limited height.

Condition: used, Year of construction: 2023, pressure 320 t chamfer lenght 6050 mm Kdjdpfx Ajzvq Eaeb Hor distance between columns 5100 mm stroke 350 mm dayligth 650 mm total power requirement 30 kW weight of the machine ca. 22.500 kg dimensions of the machine ca. 7000x2300x3200 mm

Condition: used, functionality: fully functional, AUGUST SPECIAL OFFER - The machine needs to be moved urgently: SPECIAL PRICE: Only €2,000 (as is)!!! MAN Roland Practica PRZ 00 2-Color Offset Printing Press Type: Sheet-fed Manufacturer: MAN Roland Model: Practica PRZ 00 Colors: 2 Important Note: Only 14 million copies printed!!! Maximum paper size: 360 x 520 mm Maximum print area: 350 x 500 mm Numbering and perforation Maximum speed: 10,000 sheets/hour Machine length: 2640 mm Condition: Excellent (in stock) Location: Italy Kjdpfozg Nb Iox Ab Hjdr Note: (The machine will be sold as spare parts)

Condition: good (used), Year of construction: 2016, machine/vehicle number: TAD174116002, Offer 26235 Technical data: - Working width: 4100 mm - Pressing force: 170 t - Distance between columns: 3600 mm - Overhang: 400 mm - Max. installation height: approx. 400 mm - Ram stroke: 225 mm - Working height: approx. 920 mm - Motor power: approx. 18 kW - Oil capacity: approx. 300 l - Space requirement: approx. W 4800 x H 2750 x D 2300 mm - Weight: approx. 12500 kg - Includes: - Swivel arm – control panel with ESA control - For 4 axes Y1 + Y2, X, Z - Motorized back gauge with motorized height adjustment - Crowning - Safety – light curtain - 4-way universal die + split ram tool 4000 mm - Pointed tool 4000 mm - Ram tool 3000 mm - V-die 3000 mm - Electric foot switch - Side-mounted adjustable support arms Kjdpfszu Na Hsx Ab Hjdr

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: V309866-20, pressing force: 126 t, filling opening width: 1,620 mm, filling opening length: 1,000 mm, bale length: 1,800 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 650 kg, total height: 7,034 mm, type of input current: DC, input voltage: 400 V, overall weight: 43,000 kg, noise level: 85 dB, pressure: 280 bar, oil tank capacity: 2,700 l, power: 160 kW (217.54 HP), empty load weight: 43,000 kg, protection type (IP code): IP55, stroke length: 2,900 mm, Equipment: documentation/manual, Kdodpfx Aeznm H Djb Hsr

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, GÜNTHER GTP 600 MC2 | Combined roller steak tenderizer and meat press (strip tenderizer) Kodpfx Aszu Axcob Hsdr Manufacturer: Günther Maschinenbau GmbH Model / Type: GTP 600 MC2 Serial number: 34477 Year of manufacture: 2015 Power supply: 400 V / 50 Hz / 16 A Power: 4.5 kW Overall dimensions: 2250 x 2050 x 2050 mm Working width: 570 mm Belt width: 595 mm (plastic) Pneumatic parameters: working pressure 6 bar, air consumption 100 l/min The GÜNTHER GTP 600 MC2 is an advanced, industrial machine that combines the functions of a roller steak tenderizer and a pneumatic meat press in a single processing step. The machine is designed for professional meat processing plants, butcher shops, and production lines for cooked and cured meat products. Combining surface scoring with mechanical pressure significantly increases the active surface area for brine absorption, improves protein release, and ensures excellent binding and consistency of the product after heat treatment. The unit is factory-equipped for operation in continuous processing lines, including directly after automatic brine injection machines. The scoring rollers and pneumatically controlled pressing roller automatically adjust their clearance to the thickness of the meat piece being processed (pork, beef, or poultry). This ensures a repeatable processing cycle without damaging the fiber structure, which translates into higher slicing efficiency and an aesthetically pleasing appearance of the finished product’s cross-section.

Condition: good (used), Year of construction: 2014, high-performance briquette press year of manufacture 2014 Ksdjztk Ayjpfx Ab Hsdr with only approximately 2,400 operating hours with an 11 kW motor original price approximately €55,000

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 30 h, pressing force: 150 t, stroke length: 1,200 mm, table width: 800 mm, table length: 800 mm, retraction force: 20.5 t, overall weight: 14,700 kg, Equipment: documentation/manual, safety light barrier, This is a brand-new Langzauner press that was never used due to a company restructuring. Data sheets can be provided upon request. Ksdpszh I Ddofx Ab Hjdr

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: TASK, controller model: MASTER 3 AX, working width: 2,500 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, control voltage: 380 V, oil tank capacity: 70 l, overall weight: 5,000 kg, total length: 2,800 mm, total width: 1,800 mm, total height: 2,200 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, finger protection, type plate available, Press brake SCHIAVI - AMADA RG 50-25 Press force 50 tons Table length 2550 mm MASTER TASK 3-axis CNC control Kjdpfxjygu Alo Ab Hedr Complete with upper and lower dies Fully functional and connected for tests and video

Condition: like new (used), Year of construction: 2003, machine/vehicle number: B0101A0074, functionality: fully functional, operating hours: 6,970 h, stroke length: 215 mm, table length: 1,000 mm, overall weight: 4,750 kg, Year of manufacture: 2003, 4 controlled axes, DELEM control system, no tooling included, testing possible. Kdedpeziygasfx Ab Hjr

Year of construction: 1971, condition: ready for operation (used), Max. stroke: 100mm, max. press force: 50t, max. oil pressure: 300kg/cm², motor power: 5.5hp, approx. 4kW, pump: Gury 6-16. An inspection on site is possible. Kdjdpszbb R Ssfx Ab Her

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 540 h, pressing force: 1,000 t, stroke length: 800 mm, reverse speed: 150 mm/s, table width: 2,300 mm, table length: 3,000 mm, total length: 4,500 mm, total width: 3,500 mm, total height: 6,000 mm, overall weight: 1,01,000 kg, working height: 1,300 mm, working range: 1,300 mm, Hydraulic press 1000t - in very good condition, used for stamping first series parts from progressive tools -we bought this maschine as new for 340 000 EUR in year 2019 Kedpfxoyilh Ie Ab Hedr

Condition: excellent (used), Year of construction: 1989, Veneer press Kdodpfeztnhmex Ab Hjr Manufacturer: Bürkle Type: U60 Year of manufacture: 1989 Plate dimensions: 2,200 x 1,250 mm Opening width: 400 mm Pressing pressure: 60 tons Specific pressing pressure: 2.2 kg/cm² Heating: Electric Motor power: 0.75 kW Emergency stop device: Emergency stop cable Weight: 3,000 kg Dimensions: 2,750 x 1,380 x 1,785 mm

Condition: excellent (used), Shelf length: 225 cm Shelf width: 135 cm Kdodpfszvnq Hjx Ab Hjr Maximum heating element height: 40 cm Maximum temperature: 120 °C Total power consumption: 14 kW

Condition: used, Year of construction: 1992, machine/vehicle number: 1311PH1442V1188, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 320 t, table length: 6,200 mm, Colly 320/6 press brake Kdsdpfx Ajy Ti Ahob Her Price negotiable.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 417 h, Amada HFE M2 5012 press brake (2021) Manufacturer: Amada Type: HFE M2 5012 press brake Condition: used, in production and operational Year of manufacture: 10/2020 Operating hours: 6830 hours Working hours: 417 hours (still in use) Pressing force (kN): 500 Press beam length (mm): 1270 Distance between machine uprights (mm): 1035 Stroke (mm): 150 Opening width without punch holder (mm): 480 Overhang (mm): 100 Working height (mm): 920 Working speed (mm/sec): 15 Approach speed (mm/sec): 185 Opening speed (mm/sec): 185 Dimensions: Length (mm): 2585 Kdsdpfx Asztyw Hsb Hsr Width (mm): 2190 Height (mm): 2420 Weight (kg): 3600 Video available.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 105102558/89, overall weight: 750 kg, Continuously fillable compactor with rotating roller collects, shreds, and compacts waste using a special steel roller, which ensures a compaction ratio of up to 9:1. Kjdpozr H Agjfx Ab Hodr It compacts the waste through alternating left/right rotation of the special roller, which continuously applies pressure to the material being fed in. It enables continuous feeding – the compacted waste remains in a transparent PE bag. The compaction station can be installed directly at the point of waste generation within the premises. It is also ideal for continuous filling via chutes or conveyor belts and is easy to operate. CE standards requires particularly little maintenance.

Condition: excellent (used), Year of construction: 2014, Counter: 71 Mil. clicks Equipment / additional information: HP IndiChrome Plus 7-color on-press printing White ink kit Enables use of white ink Technical specifications Kodpfx Abozavhce Hedr Printing speed 120 four-colour a4 images per minute (two-up); 240 two-colour or monochrome a4 images per minute (two-up) Image resolution 812 and 1219 dpi at 8 bit, addressability: 2438 x 2438 dpi HdI (High definition Imaging) Paper format 330 x 482 mm maximum Image format 317 x 464 mm Paper weight* Coated: 80-350 gsm; Uncoated: 60-320 gsm; thickness 70-400 microns Press dimensions Width: 5443 mm; depth: 2298 mm; Height: 2104 mm

Condition: used, total length: 5,200 mm, total width: 2,700 mm, total height: 6,800 mm, overall weight: 1,10,000 kg, Renovated by Beck & Röhm in 1992, pressing force: 630 t, bolster area: 1730 × 2500 mm, number of T-slots: 8, ram stroke: 900 mm, installation height: 1550 mm, power requirement: 2 × 7.5 kW. Dismantling and loading costs are optional. If dismantling is carried out by the buyer, the corresponding costs will of course be reimbursed. Kdjdpfjzdfztox Ab Hsr Weight approx.: 110,000 kg Dimensions (LxWxH) approx.: 5200 x 2700 x 6800 mm Condition: unchecked Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No

Condition: good (used), functionality: fully functional, Very robust and heavy-duty mechanical knee-lever press made of cast iron. Converted to electric heating, 230V/50Hz. Kdjdpfozuwv Nsx Ab Her Approx. 850 kg. Pressing area: 40x45 cm.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. Kdsdpfx Aszvq Rcob Hor The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 300 mm, table width: 1,400 mm, installation height: 500 mm, • Type of machine: Hydraulic press / C-frame press • Manufacturer: Müller Weingarten (historic German engineering company) • Model designation: CKD 100 4.1 • Applications: • Forming, punching, pressing of metal or plastic components • Small and medium batch production • Tool and die making • Design: Robust H-frame or single-column construction, suitable for precise pressing and forming operations • Capacity: Typically around 100 t pressing force (number indicates approx. 100 metric tons nominal force—common for CKD models) 📐 Typical Features • Hydraulic drive: Precise control of force and stroke • Stroke range: Sufficient for versatile applications (e.g. drawing, bending, punching) • Stable construction: Designed for continuous industrial operation • Tool integration: Mounting options for custom tools and dies • Operation: Usually manual or semi-automatic, depending on year of manufacture 🧱 Typical Uses Hydraulic presses like the CKD series are used in production for: Kdodpfxox Ry Hrj Ab Hor • Metal forming (e.g. bending, deep-drawing) • Assembling components by pressing • Assembly processes with defined force • Quality assurance and test pressing Complete circuit diagrams and documentation available! Inspection under power possible at any time.

Condition: used, Year of construction: 1975, functionality: fully functional, power: 33.1 kW (45.00 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 60 t, stroke length: 140 mm, throat depth: 280 mm, We are offering this used Osterholt EXPA 60 eccentric press, manufactured in 1975, for sale. Machine number: 873368 Type: EXPA 60 Pressing capacity: 60,000 kg Stroke length: 280 mm Minimum ram height: 100 mm Adjustable ram: 60 mm Kdodpfxezlgz Ne Ab Her Adjustable stroke: 10–140 mm Motor power: 45 hp Mains voltage: 380 V If you have any questions or would like more information, please do not hesitate to send us a message or call us.