Used Plywood Press for sale (12,770)

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) Kdodpow Sgnksfx Anisu - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. Kodpfx Anjdx R Tfjiedu - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: ready for operation (used), Year of construction: 1984, stroke length: 60 mm, controller manufacturer: SIEMENS, Mechanical stamping press manufactured in 1984. This KAISER V50W High-Speed Press underwent a complete mechanical and electrical overhaul in 2022, featuring a new Siemens control system and a SEW 59 kW main motor. It offers a pressing force of 500 kN and a stamping speed of up to 400 strokes/min. If you are looking to get high-quality stamping capabilities, consider the KAISER V50W High-Speed Press we have for sale. Contact us for further details. • Retrofit/overhaul: Complete mechanical and electrical overhaul in 2022 (approx. €50,000) • Stroke: 8–60 mm • Ram adjustment: 80 mm Kdodpfx Anez E Ikioieu • Stamping speed: up to 400 strokes/min • Table size: 800 × 550 mm • Main motor: SEW 59 kW (installed 2022) • Control system: Siemens (new electrical system and cabinet in 2022) • Operator panel: Siemens SIMATIC HMI • Press force monitoring: UNIDOR • Condition: Very good, ready for operation Technical Specification Stamping Force 500 Kn

Condition: reconditioned (used), Year of construction: 2015, Presto HAN10R Kdedpfx Ajz E U Twsniou Year of manufacture: 2015 2 units immediately available Skip loader container 10 cubic meters usable volume Top-hinged discharge door Two-part lid, opening to the left/right above the filling opening Prepared for ramp operation Technically refurbished, inspected, and serviced Painted in RAL6018 We will gladly prepare an offer including delivery.

Condition: used, Year of construction: 2014, power: 5 kW (6.80 HP), We are selling a container press! 1. Manufacturer – Ludden und Mennekes Type – LM20L Year of manufacture – 2014 Capacity – 20 m³ Motor power – 5.5 kW Kodpjz Hbzqefx Anisdu 2. PRESKONTAINER LM20L, 2011, 5.5 kW Price on request!

Condition: used, Year of construction: 2019, power: 4 kW (5.44 HP), 1. PRESCONTAINER LM10ASG +HKV, YEAR OF MANUFACTURE – 2019 OUTPUT – 5.5 kW CAPACITY – 10 m2 Kjdpfx Ajz Hclkeniedu 2. PRESCONTAINER LM10ASG, YEAR OF MANUFACTURE – 2015 OUTPUT – 5.5 kW CAPACITY – 10 m2 3. PRESCONTAINER LM12R + HKV, YEAR OF MANUFACTURE – 2009 OUTPUT – 5.5 kW CAPACITY – 10 m2 4. PRESCONTAINER NP10APK, YEAR OF MANUFACTURE – 2011 OUTPUT – 5.5 kW CAPACITY – 10 m2 PRICE UPON REQUEST!

Condition: excellent (used), Year of construction: 1999, LVD PPEB110/30 CAD-CNC 110T Serial number: 26225 Year of manufacture: 1999 Bending length: 3050 mm Kodpfxszzafge Anisdu Servohydraulic bending system Precise slider positioning using a linear encoder Suitable for precise sheet metal bending.

Condition: used, Year of construction: 1987, machine/vehicle number: 17251, Pressing force: 63 tons, with draw cushion and separate hydraulic unit. Kdsdpoz Nhp Ijfx Anisu

Condition: as good as new (ex-display), Year of construction: 2026, Technical specifications: Laminated panel press from our showroom; Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Kjdpeb Eln Defx Anijdu Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: available from our warehouse in 54634 Bitburg.

Condition: excellent (used), Year of construction: 2018, Veneer press, OMC Type PL 105 30/13 Year of manufacture: 2018 Dimensions: 3000 x 1300 Piston diameter: 6 x 85 Kdsdszx Sh Ujpfx Anieu 3.2 kg/cm2 Weight: approx. 3300 kg

Condition: new, stroke: max. 500daylight: max. 1000motor: 15performance of pump: 65oil filling: 120messurements (LxWxH): 1300 x 3300 x 2950weight approx.: 6000pressure: 300Speed: vorlauf 8 / rücklauf 13,5Electro-hydraulic workshop press 300 t- Anti-rotation device for the cylinder piston - Pressure regulating valve - Speed control throttle valve - Emergency stop safety device - Noise level: 75 dB - Soft starter - Two-hand control panel - Linear measuring device for stroke adjustment with digital display - Pressure gauge - Digital pressure display - Emergency stop buttons on the control cabinet and on the two-hand control panel - Hydraulic tank including motor mounted at the lower side next to the frame - Hydraulic lines with check valves - Table manually height-adjustable and secured with 3 locking pins Kedpfx Anoz Hgb Asiedu

Condition: excellent (used), Catalog number: 7984 TECHNICAL DATA - Clamping force: hydraulic - Briquette shape: round - Briquette diameter: 70mm - Hopper diameter: 1000mm - Output: up to 10 briquettes/min, up to approx. 90 kg/hour - Automatic machine operation - Motor: 5.5kW - Dimensions (L/W/H): 1800x1200x1500mm - Weight: approx. 650kg ADVANTAGES - Made in Italy Kedpozwwxcefx Aniodu - Used briquetting machine - Unpainted - Very good condition Net price: 33900 PLN Net price: 7884 EUR, depending on an exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: good (used), Year of construction: 1992, functionality: fully functional, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Control system: LVD MNC 95 Kdedpfx Aoz I N Hwoniou Total power consumption: 14 kW Machine weight (approx.): 7,700 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 2,420 mm, total length: 6,840 mm, total height: 2,600 mm, overall weight: 15,000 kg, type of input current: three-phase, filling opening length: 2,000 mm, filling opening width: 1,980 mm, input voltage: 400 V, empty load weight: 4,950 kg, DGUV certified until: 08/2027, Presto HGS20R Container for roll-off tipper trucks 20 m³ usable volume technically refurbished repainted in desired RAL color Kdjdpfjzt Nirex Anisu hook lift system on both sides discharge door hinged at the top

Condition: good (used), Year of construction: 1997, Used Beyeler press brake Ksdpfoz H Udlex Anisdu Type PR10 200 4100 Capacity 4100 x 200 tons Cybelec CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC-controlled Wila upper and lower clamping system Tools not included

Condition: excellent (used), Year of construction: 2010, Used press brake from MVD Type EAP12 040D Capacity 1250 x 40 tons Delem DA56 CNC control Y1, Y2 and X axes CNC controlled Akas Fiessler laser safety system Includes numerous tools Kdjdpfoz Il U Rex Aniou

Condition: like new (used), Heidelberg GTOZ-S52 offset printing machine The machine is ready to work, very good condition, purchased from small printing house. Technical data: Format: 36x52cm 2 printing units Weight: 3000kg Power supply: 400V Year of production: 1994 Kdedpfxez E A I Aj Aniju Baldwin alcohol dampening Control panel Documentation and additional elements included.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Pre-compression force 28 t Main compression force 85 t Infeed chute 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume output: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying 5-strand vertical, (3-strand horizontal) Oil tank volume 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (L x W x H) Weight approx. 27,000 kg Materials: Paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It was dismantled from ongoing operation. The horizontal tying is currently not functioning. The technical documentation is available. Kdjdpfx Asz H I E Aeniju The following work has been carried out by us: New wear plates (Hardox) in the press channel Seals completely replaced on the main cylinder Oil filter changed Vertical tying system overhauled and made operational. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made with advance payment, ex works, without warranty. Our payment terms are 100% advance payment.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 120 t, ram plate length: 4,300 mm, Equipment: CE marking, SAFAN 120-ton, 4300mm CNC Edge Press/Folding Machine Ksdpfxjz It Sqs Anijdu Used bending machine / press / edge press Brand: SAFAN Model: [Model number missing in the original text] Year: 2002 Press force: 120 tons Bending length: 4300mm CNC control with touchscreen Front supports Operating manual Electrical and hydraulic diagrams Rear safety gate Side safety gates

Condition: used, Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1350 mm Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2000 mm Slide area: 3500 x 2000 mm Die cushion capacity in table: 150 ton Die cushion stroke: 200 mm Die cushion pad area: 2700 x 1500 mm Number of strokes: 7 - 21 s.p.m. Kedoz Hi Rgepfx Anijdu Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Required power: kW Height over floor approx.: 8600 mm Weight of machine approx.: 250 ton Standard configuration LINK DRIVE

Condition: good (used), Year of construction: 2005, power: 7.5 kW (10.20 HP), pressing force: 120 t, stroke length: 1,000 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, throat depth: 400 mm, clearance between the columns: 2,550 mm, total length: 5,700 mm, total width: 1,800 mm, total height: 3,100 mm, overall weight: 9,650 kg, Equipment: documentation/manual, Press brake SAFAN - H-Brake 120TS1 MACH-ID 9820 Make: SAFAN Type: H-Brake 120TS1 Control: TS1 YOP: 2005 Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X/ Z1 / Z2 / R-Central Control: TS1 Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Kedpfx Asz Hka Aonisdu Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Kedpfjz Dtaaox Anisdu Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: excellent (used), Year of construction: 2017, Pressing force: 8,000 kN Stroke: 2,000 mm Clamping area: 4,900 x 2,500 mm Max. tool weight: 50,000 kg Approach speed: 300 mm/s Working speed: max. 60 mm/s - min. 6 mm/s Ksdpsz A Tvxofx Aniodu Weight without tool: 225,000 kg

Condition: excellent (used), Catalog number: 7732 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1200 mm - Capacity: approximately 70 kg/h - Automatic machine operation - Motor: 7.5 kW - Max. operating pressure: 150 bar - Dust extraction outlet: 90 mm - Diameter of the filter bag opening: 500 mm - Max. bag height: 900 mm - Dimensions (L/W/H): 1950x1400x2700 mm - Weight: 1130 kg ADVANTAGES – Made in Italy Ksdpfxezw Dbko Aniedu – Option for direct connection of a sawdust extraction system – Used briquetting machine – DTR documentation available – Very good condition Net price: 29900 PLN Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,000 h, Machine in very good condition, only 17.000 hours. Kdjdpfx Anjz Ayq Esieu Fully functional.