Used Pneumatic Table for sale (22,909)

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, total width: 2,600 mm, total length: 3,700 mm, overall weight: 2,700 kg, type of input current: three-phase, input voltage: 6,000 V, input frequency: 50 Hz, pressure: 6 bar, Automatic glass cutting table for monolithic glass with loading-unloading arms. Main features: - Rectified rack-and-pinion transmission and linear guides with “0” clearance, ensuring high precision of movement on both axes. - Metal structure made of sheet metal profiles cut on a laser cutting machine and formed on a bending machine. The resulting structure has a minimum number of weld seams and, therefore, high dimensional accuracy and stability. - Latest generation, brushless electric motors, Lenze – Germany. - Automatic detection of glass thickness and automatic adjustment of the cutting head pressure to achieve maximum cutting quality. - The control panel can be located up to 7 meters away from the table. Hsdpsz Rvi Eofx Airow - Hydraulic folding of the loading-unloading arms. - The loading cycle is as follows: the extensions of the folding arms are manually pulled out, and the folding into the vertical plane is commanded. The glass is supported on the bases of the arms, and the folding is commanded. After the glass reaches the horizontal plane, it is manually positioned by the operator anywhere in the cutting area. - Automatic detection of the glass position (automatic squaring) and automatic correction of the cutting head trajectory (the glass can be positioned anywhere on the surface of the cutting table). - “Double 0” system that allows mirror cutting of laminated glass with an accuracy of ± 0.5 mm. General feature: - The work surface of the Turomas tables is made of aluminum covered with a phenolic plate that is ground on one side, and a synthetic felt is glued on top. Since there are no wooden plates in the structure, there are no pressure losses in the air cushion. Also, due to the phenolic plate (a latest generation plastic), the work surface of the table is particularly resistant to mechanical impact, deformation, solvents, acids, humidity, and water vapor. - Intuitive TUR-ISO operator interface, easy to use, developed in a single window. The cutting plan can be viewed and edited in a field of this window. The Maintenance menu can also be accessed from this window, where all the set parameters of the machine can be viewed and modified. - Remote technical support system via the Internet for quick diagnosis and service. - Protection system with barriers and emergency stop button. - Scanner Scanning is done through a sequence of points, which are then converted into curves. The template thickness can be up to 20 mm. - VIN-CUT vinyl cutting - BRK 23 system - Consists of 1 transverse breaking bar + 1 longitudinal breaking bar (materialized by points). This breaking system guarantees minimal contact with the glass surface and maximizes the reduction of potential scratches due to the wear of traditional breaking bars (with a wooden contact surface). Automatic system for transferring the cut glass sheet from the cutting table to a breaking table. The system is mounted on the cutting bridge, on the opposite side of the cutting head, and consists of two vertical pistons that allow the glass to be moved to the next table. Cutting head with two cutting rollers. The table reads the glass thickness and automatically selects which of the cutting rollers to lower. By using this option, the entire range of glass thicknesses that can be cut is covered, in the range of 2 - 25 mm.

Condition: new, Year of construction: 2026, machine/vehicle number: 3208, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 125 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, total length: 6,700 mm, total width: 4,670 mm, total height: 1,480 mm, overall weight: 815 kg, Equipment: CE marking, documentation/manual, saw blade guard, Piła formatowa LAZZURI FX 3200 przeznaczona jest do cięcia drewna oraz materiałów drewnopochodnych, takich jak płyty wiórowe, MDF i sklejka, przy zastosowaniu odpowiedniej tarczy. Maszyna sprawdzi się w warsztatach stolarskich, zakładach meblowych oraz przy produkcji elementów na wymiar. Stół formatowy o długości 3200 mm umożliwia obróbkę materiałów wielkoformatowych, a pochylany agregat pozwala na wykonywanie cięć prostych oraz pod kątem. Pilarka wyposażona jest w silnik główny o mocy 5,5 kW oraz podcinak napędzany osobnym silnikiem o mocy 0,75 kW. Trzy prędkości obrotowe tarczy głównej pozwalają dopasować pracę do obrabianego materiału i zastosowanego narzędzia. DANE TECHNICZNE: – producent: LAZZURI, – model: FX 3200, – typ maszyny: piła formatowa z podcinakiem, – moc silnika głównego: 5,5 kW, – moc silnika podcinaka: 0,75 kW, – maksymalna średnica tarczy głównej: 400 mm, – maksymalna średnica tarczy podcinaka: 120 mm, – prędkość obrotowa tarczy głównej: 3000 / 4000 / 5000 obr./min, – prędkość obrotowa tarczy podcinaka: 8000 obr./min, – maksymalna długość cięcia: 3200 mm, – maksymalna szerokość cięcia: 1250 mm, – maksymalna wysokość cięcia przy 90°: 125 mm, – maksymalna wysokość cięcia przy 45°: 85 mm, – zakres pochylenia agregatu: od 90° do 45°, – regulacja wysokości cięcia: ręczna, – regulacja kąta cięcia: ręczna, – średnica króćca odciągowego: 100 mm, – masa maszyny: 815 kg. Hjdpfx As Af If Tsirjw STÓŁ I PROWADNICE: – aluminiowy stół formatowy o długości 3200 mm, – szerokość stołu formatowego: 418 mm, – stół prowadzony na prętach za pomocą systemu rolek, – rozsuwana przykładnica poprzeczna o maksymalnej długości 3200 mm, – dwa przesuwne ograniczniki na przykładnicy poprzecznej, – szkła powiększające ułatwiające odczyt skali przy ogranicznikach, – przykładnica równoległa z aluminiowym liniałem o długości 700 mm, – skala przykładnicy równoległej do 1250 mm, – blokowanie przykładnicy równoległej za pomocą szybkozacisku. WYPOSAŻENIE I FUNKCJE: – podcinak z osobnym silnikiem, – podwójnie łożyskowany wał piły, – trzy prędkości obrotowe tarczy głównej, – zmiana prędkości za pomocą pokrętła, – ręczna regulacja wysokości i kąta cięcia, – wskaźnik zegarowy przy regulacji, – elektroniczny licznik do ustawiania szerokości cięcia. WYMIARY WYMAGANE DO USTAWIENIA MASZYNY: – długość: 6700 mm, – szerokość: 4670 mm, – wysokość: 1480 mm. ZALETY MASZYNY: – długość cięcia 3200 mm, – szerokość cięcia 1250 mm, – możliwość cięcia pod kątem do 45°, – maksymalna wysokość cięcia 125 mm przy tarczy 400 mm, – podcinak z niezależnym silnikiem, – trzy prędkości obrotowe tarczy głównej, – możliwość obróbki dużych płyt i elementów meblowych.

Condition: used, Year of construction: 1933, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,259 mm, travel distance Z-axis: 1,500 mm, table length: 1,250 mm, table width: 1,400 mm, overall weight: 10,500 kg, x-travel 1600 mm y-travel 1259 mm z-travel 1500 mm tool adaptor SK 50 weight 10,5 t output 49 kw feed 6000 m/min control Heidenhein 151 1600 min table: 1250-1400 mm serial number 1933 Hedjz Aun Sopfx Airjw weight of the machine ca. 10,5 t

Condition: like new (used), Year of construction: 2023, GENERAL DESCRIPTION: Advanced tooling with a dense and symmetrical structure of the clamping elements. Designed for precise positioning and rigid clamping of geometrically complex components (e.g., car body panels) during automated welding or spot welding processes. The design features a high degree of repeatability of the base points and is fully adaptable for mounting on a welding rotator. COMPONENTS: Hodpfx Aoz Ng Nyeirew 1. DESTACO brand pneumatic (knee-type) clamps – 30 pieces. Heavy-duty clamping elements responsible for the mechanical locking of the part. 2. FESTO brand compact pneumatic cylinders – 14 pieces. Used for extending the positioning pins or auxiliary locks. 3. Clamp position sensors (inductive/magnetic) – approx. 30 pieces. Monitor the open and closed states of the clamping elements. 4. Pneumatic installation in thermal shields (Pyrojacket type) – a complete system of manifolds with flexible hoses in thick, red, fire-resistant braids, protecting against welding spatter. 5. Valve manifolds / pneumatic distributor blocks – 2 pieces. Control the operating sequences of the individual clamps. 6. Positioning blocks, reference bases (NC blocks) and pins. Precisely milled support points with engraved technological coordinates. 7. Main structural frame – 1 piece. Rigid, stress-relieved welded structure made of closed profiles, equipped with transport lugs and mounting plates for the rotator disc.

Condition: refurbished (used), Year of construction: 2017, functionality: limited functionality, WMW UNION CNC table-type boring mill, completely overhauled and modernized in 2017. The machine has been rarely used since then. It is currently disassembled and kept in storage. Cannot be inspected under power!!! Hjde Af U Dvjpfx Airow

Condition: excellent (used), Year of construction: 2019, Table milling machine HOFMANN TFS 107, manufactured in 2019. Hedpo Adubxefx Airow Table milling machine with a milling fence and safety guard. Collection possible from December 15th. Earlier collection is only possible by prior arrangement. Inspection by appointment only. Dismantling, loading, and transport will be arranged. Price on request. Contact: DS-Maschinen – Owner David Schulz.

Condition: good (used), Year of construction: 1960, Make: Bäuerle, including integral fence and HolzHer power feed Model: SFM 2 Tilting range: 0 to 45° Brake Motor with 2 speeds/pole-changeable 6 speed settings: 1,800 - 4,500 - 5,600 - 6,000 - 9,000 - 12,000 rpm Forward/reverse rotation Table size: 1150 x 1200 mm Spindle diameter: 30 mm Milling fence Required space approx. 1200 x 1200 x 1300 mm Hedpfx Ajy E T Ufjirew Weight approx. 1000 kg Location: 54634 Bitburg, loaded free on truck, unpacked Delivery in current condition as inspected, function-tested without overhaul, without warranty or guarantee

Condition: used, Year of construction: 1991, sliding table length: 3300 mm Hjdpfx Aiezdzbhorew cutting width at the fence: 1000 mm cutting width at the cross cut: 2800 mm cutting depth: 170 mm scoring unit: nein height adjustment sawblade: hydraulisch tilting adjustment sawblade: hydraulisch adjustment fence: manuell read out sawblade tilting: Scala read out cutting height: Scala read out fence: Scala read out crosscut: Scala sawbladediameter: 500 mm sawblade speeds: 2800 / 4000 / 5500 motorpower: 5,5kW suction connection: 80 und 120mm machine lenght: 4000 mm machine width: 2200 mm weight: ca. 1300kg

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Hjdpjz Hb Nbsfx Airjw

Condition: used, Year of construction: 1998, sliding table length: 3000 mm cutting width at the fence: 1000 mm cutting width at the cross cut: 3200 mm cutting depth: scoring unit: ja height adjustment sawblade: manuell / Kurbel tilting adjustment sawblade: manuell / Kurbel adjustment fence: manuell readout sawblade tilting: Digital read out sawblade height: - read out fence: Scala read out crosscut: Scala Hedpfx Aijzdzbbsrew sawbladediameter: 450 mm number of speeds: 4000 U/min motor power: 4 kW motor brake: ja - automatisch suction connection: 80 mm und 120 mm machine length: 3000 mm machine width: 2100 mm weight: ca. 1100 kg

Condition: excellent (used), Panel saw ALTENDORF F45 ProDrive Technical data * Manufacturer: Wilhelm Altendorf GmbH & Co. KG * Model: F45 ProDrive * Year of manufacture: 2016 * Serial number: 16 * Machine type: Panel saw with sliding table Technical parameters * Main motor power: 7.5 kW * Minimum saw blade diameter: 250 mm * Maximum saw blade diameter: 450 mm * Width of the saw blade guard slot: 13 mm Electrical data * Connection voltage: 400 V * Rated current: 15.5 A * Frequency: 50 Hz * Number of phases: 3 Main motor Hjds Aa Nt Uepfx Airjw * Motor manufacturer: ATB * Motor type: AF132S/2B-11 * Motor power: 7.5 kW

Condition: used, total height: 500 mm, total length: 2,000 mm, total width: 1,000 mm, Year of manufacture: 2026 Colour: Grey Empty weight: 500 kg The price does not include accessories. - Year: 2026 - Model: Hardened metal - Table length [mm]: 2000 - Table width [mm]: 1000 - Table top thickness [mm]: 15 - Options: Diagonal grid, Drilled holes, Adjustable working height, Clamping grid - └ Hole diameter [mm]: 28 - Transport dimensions: 2000mm x 1000mm x 500mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hodpfx Aiez U I Ubjrsw Lukas van Rossum

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-085AAV, Chicago Pneumatic Angle Turbine Grinder CP3T30-085AAV with autobalancer with spindle lock Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Specifications: Speed (idle): 8500 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Weight: 2.1 kg Spindle Thread: M14 Air connection: IG 3/8" min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free Hedpsxwn R Ajfx Airjw

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Manufacturer: Duplo / FKS Model: PFi Blade B2+ Category: Digital flatbed cutting plotter Year of manufacture: 2023 Condition: Like new TECHNICAL DATA & FORMAT: - Max. sheet size: 800 x 600 mm (B2+) Hodsz Rkqkspfx Airow - Min. sheet size: 210 x 297 mm (A4) - Max. material thickness: up to 1.3 mm (approx. 1000 g/m²) - Feeder: Automatic vacuum belt feeder - Feeder stack height: 100 mm FEATURES & EQUIPMENT: - Multi-tool head (cutting, scoring, creasing) - Oscillating knife for thicker materials (corrugated board, honeycomb board) - Tangential / drag knife - Creasing wheel - CCD camera system for automatic register mark & QR code recognition - Vacuum table for sheet fixing - Inclined discharge / sheet discharge - PFi Blade PC software incl. control unit

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, cart length 4300 mm scoring saw Hedo Ad I D Topfx Airsw maximum saw blade diameter 350 mm electric saw blade height adjustment electric saw blade angle adjustment main motor power 5.5 kW scoring saw motor power 0.75 kW electric fence adjustment from the control panel bumpers on the cross fence, adjustable from the control panel table running on steel rods blade guard duplex fence included year of manufacture 1998 CE marking external dimensions 4500x2200 mm, height 1750 mm

Condition: as good as new (ex-display), Year of construction: 2019, Wood-Mizer MS300 – Sliding table circular saw • Condition: Demo machine, exhibited at trade shows and exhibitions • Cutting height: 103 mm • Distance between saw blade and fence: 800 mm • Sliding table: 1,400 × 350 mm • Sliding travel: 1,235 mm • Work table length: 900 mm; overall width: 750 mm • Saw blade diameter: 315 mm Hedpfs Af Hdhox Airjw • Arbor diameter: 30 mm • Spindle speed: 4,400 rpm • Blade tilt: 0–45° • Motor options listed in the model specifications: 3 kW three-phase or 2.2 kW single-phase

Condition: excellent (used), Year of construction: 2020, Equipment: Manual adjustment of the milling spindle with digital display Milling fence with crank adjustment of the fence jaws and digital display Electrical preparation for feed mechanism Speed indicator Right/left rotation of the milling spindle with electrical locking during switching Automatic motor brake CE conformity declaration Hsdj Aayg Ejpfx Airsw Technical data: Spindle extension length 140 mm Milling spindle diameter 30 mm Spindle speeds 3000/4500/6000/7000/10000 rpm Overhang of the spindle base from the table 5 mm Dust extraction port diameter 2 x 120 mm INCLUDED OPTIONS: - Milling fence with crank adjustment - Aluminum fence jaws instead of the wooden fence jaws on the milling fence - LL version with 2 cast iron table extensions, length 2500 mm - Motor power: 7.0 kW, 400 V, 50 Hz Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex works, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claim. The buyer is free to inspect the machines at the location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address + telephone number!)

Condition: like new (used), Year of construction: 2023, GENERAL DESCRIPTION: A self-contained, dedicated tooling system designed for a specific operation within an automated production line. It features a robust, open central frame and standardized, heavy-duty mounting units. The tool directly interfaces with industrial robots in a thermal hazard zone, incorporating advanced installation safety features and a dedicated system for dissipating stray currents. COMPONENT LIST: 1. DESTACO brand main welding clamps with opening angle control – 20 pieces. Equipped with a mechanical angle indicator (range 5-135°) to facilitate collision-free loading. 2. Eye bolts (lifting lugs) – 4 pieces. 3. Copper grounding blocks (welding grounding) – approximately 2 connection points. Thick copper connections protect the electronics and positioner bearings from welding current. Hsdsz Ng N Tepfx Airsw 4. Electro-pneumatic junction box (I/O connection box) – 1 piece. A collective housing for signals from inductive sensors, facilitating communication with the PLC controller. 5. Base blocks (NC blocks) with an X, Y, Z coordinate plate – approximately 25 pieces. Base pillars (so-called shims) guaranteeing perfect spatial positioning of the part. 6. Pneumatic installation in red protective sleeves – a complete supply line hidden within fire-resistant covers, safely routed inside the profiles and through edge feedthroughs. 7. Base frame with a process stand – 1 set. Consists of a galvanized working frame and a black service stand for offline maintenance tasks.

Condition: excellent (used), Year of construction: 2017, Ref: 11168 . 2017 Bobst HANDYPACK GT Semi-Automatic Carton Collecting & Packing Table For use at the delivery of a folder-gluer, collects folded and glued cartons and presents them for easy manual packing. Features: • Assists efficient carton collection and manual packing • Adjustable carton flow for handling delicate products Hedpfe Af Tqnsx Airow • Flexible positioning at the folder-gluer delivery • Quick setup and changeovers • Compact, mobile design Specification: Minimum folded carton size: 80 × 50 mm Maximum folded carton size: 500 × 400 mm Solid carton board: Up to 700 g/m² Corrugated board: N, F and E flute, subject to material properties Collection: Continuous carton rows or counted batches Conveyor speed: Adjustable Collection conveyor height: Adjustable Carton layer thickness: Adjustable

Condition: used, Year of construction: 1983, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm z-travel 1240 mm w-axis 950 mm Hodpfx Ao Afpz Neirsw CNC Radial face slide diameter 700 mm turning speeds 16-1250 U/min spindle drive 30 kW table surface area 1420x2000 mm workpiece weight 12000 kg control Siemens type 840 C radial face slide travel 170 mm spindle drive 42 kW turning speeds 16-1250 U/min faceplate speeds from - to 4-315 U/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1980, Spindle swivels: No Height adjustment: Handwheel Milling vice adjustment: Manual Height indicator: Scale Milling stop indicator: Scale Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000, speed indicator defective Motor power: 5 / 6 kW Motor brake: Yes Dust extraction port: 120 mm Machine length: 2500 mm Hedjzdzb Iepfx Airsw Machine depth: 900 mm Weight: 800 kg

Condition: excellent (used), We offer a table-type shot blasting machine – STEM 14x6/2S/2WX1M with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotary tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the external surface of parts placed on a rotary table. The machine is equipped with two rotary tables. Rotary table diameter: 1400 mm Maximum product height: 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Total operating hours: 5275 Commissioning date: March 31, 2009 Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Shot blasting wheel, number and type: 2 WX1M Outer diameter of shot blasting wheel: 330 mm Shot blasting wheel speed: 2900 rpm Amount of abrasive material discharged per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Hsdpfx Ae Afak Uoirew Rotary table diameter: 1400 mm Rotary table speed: 2 rpm Spindle diameter at the front bearing: 105 mm Maximum torque on the spindle: 2500 Nm Distance from the spindle axis to the clamping surface of the table: 60-560 mm Maximum workpiece weight: 500 kg per rotary table.

Condition: used, Year of construction: 2002, Sled length: 3000 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring blade: no Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Crosscut fence with miter function: yes Saw blade diameter: 450 mm Hjdpjzhm Dpsfx Airow Speeds: 4 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 2004, Slider length: 3400 mm Cutting width at the rip fence: 1300 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut scale display: scale Crosscut scale with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 7.5 kW Dust extraction connection: 80 and 120 mm Hedpfx Aijzqyxxerew Machine length: 3600 mm Machine width: 2000 mm Weight: 1200 kg

Condition: excellent (used), Year of construction: 1990, ALTENDORF F45 tilting circular saw with scoring unit Scoring unit Double roller carriage, tilting, parallel fence Extension table, table extension, anodized aluminum, table widening, anodized aluminum, upper guard, narrow and wide ----- Technical data ----- Tilting range: 45°, Hjdpfx Aiszipw Isrew carriage length: 3,200 mm, cutting width: 1,250 mm, max. saw blade diameter: 450 mm, motor power: 5.5 kW, 3 speeds dust extraction port diameter: 80 / 120 mm Location: in stock at 54634 Bitburg - immediately available -