Used Table Top Machine for sale (71,147)

Condition: used, Zwick   Type: BZ1.0 / TH1S   Rcodpfx Aiozdryzereh Zwick table-top testing machine   Zwick with a maximum force of 1.0 kN.   Crosshead travel: 1150 mm. Testing speed: 0.1 ... 1800 mm/min   Scope of supply: (See images)   (Changes and errors in the technical data are subject to change!)   We would be happy to answer any further questions you may have by phone.

Condition: used, Zwick Type: BZ2.5/TN1S Rcedszdry Iepfx Airsh Zwick table-top testing machine, tensile strength measuring machine Application area: Wide range of applications, from testing plastics and elastomers to testing paper, textiles, foam, and wire, as well as component testing. Load frame: Max. test force FN in tension/compression direction: 2.5 kN Height (h1): approx. 770 mm Width with electronics unit: 320 mm Depth with electronics unit: 414 mm Height of the working area h min ... h max: Travel carriage angle mounted upwards: 227 ... 573 mm Travel carriage angle mounted rotated by 180°: 57 ... 403 mm (each without connecting pin) Connection values: Electrical connection: 115/230 V, 4/2 A, 1-phase/PE/N Power consumption: 0.4 kVA Mains frequency: 50/60 Hz 2.5 kN Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Rcedpfxszt Ai Es Airsh Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We offer a new table blasting machine – high-quality Czech manufacture, with premium materials used in production. Model: TSM 360-1.5 - Rotating table diameter: 1,500 mm - Maximum blasting part height: 550 mm - Total machine height: 3,000 mm - Total machine width: 2,000 mm - Total machine depth: 1,600 mm - 1x throwing turbine – power: 7.5 kW – with frequency inverter The turbine supports both left and right rotation. - Bucket elevator – power: 1.1 kW - Table rotation – power: 1.1 kW – with frequency inverter Table rotation can be manually controlled via button. - Total machine power: 9.7 kW The machine features a frequency inverter for adjustable turbine speed. Rcodpfsw Nbycjx Aireh A major advantage is the ability to switch turbine direction between left and right rotation. Blasting unit is CE-certified. Additional advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, this model stands out as a highly advanced table blasting machine due to its concept and design. (Blasting machine, sandblaster, shot blasting, blast cleaning, sand blasting, blasting equipment).

Condition: used, Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Material Testing Machine, 20 kN, Tensile & Compression Testing, testXpert III For sale is a high-quality Zwick / Roell material testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The machine is controlled via a PC with Zwick/Roell testXpert III software (storage medium and documentation available). Technical Data: Nominal testing force: 20 kN Testing direction: Tensile & Compression Power connection: 230 V / 50–60 Hz / 1-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical Data (from documents & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: Tensile & Compression Max. testing frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Overall height: approx. 1,545 – 2,114 mm (depending on the crosshead position) Overall width: approx. 856 mm Overall depth: approx. 650 mm Working space width: 440 mm Weight: approx. 150 kg (basic unit) approx. 180 kg with typical equipment Electrical Data Power connection: 230 V AC Phases: 1-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Rcedpfx Aszimgtoirjh Measuring & Control Electronics Internal measurement value acquisition: 500 Hz Data transmission to PC: 10–100 Hz adjustable Interface: RS232 (COM) Protection class for electronics housing: IP32 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (See picture) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC condition see pictures) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (storage medium) Original operating and technical documentation Various connection and linking cables (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: like new (used), Year of construction: 1998, functionality: fully functional, Swivel spindle milling machine VEMA TFMS 2-4 in very good condition, like new; the machine comes from a correctional facility and has only been idle for the past few years; it has been used very little and operated by only one person. VEMA is a company from Northern Germany; the machine's design is similar to the KÖLLE F45 or the PANHANS 240. everything functions perfectly all bearings and guides are in good condition year of manufacture 1998 the machine has the control panel on top with a milling stop that can be adjusted on one side or completely in depth; this is possible with a handwheel in each case. For complete adjustment, there is a mechanical counter; the counter can be set to zero at any point by pressing a button, allowing the stop to be adjusted quickly and very precisely. both stop jaws can also be adjusted individually; there are also 2 mechanical counters, which allow for one-sided adjustment and also enable facing operations, for example, on a gluing profile. the milling stop can be rotated on the machine table the machine has an extra-powerful motor with 7500 watts with pneumatic spindle locking the chips can be removed very well, with 2 extraction ports 120mm with a 30mm spindle that can be adjusted steplessly from -10 to 45°; the spindle is adjusted by handwheel with a mechanical counter. with right/left rotation we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros; this means you have no risk when purchasing. Shipping to Austria and the rest of the EU is also possible upon request. with a large table opening that can be reduced by means of various rings; this means that milling cutters with a very large diameter can also be used, and you can also mill safely with small milling cutters (the rings are included, but they are not visible in the pictures). with 3000, 6000, 4500, 7500 and 9000 rpm the spindle height adjustment is also done by handwheel; here too, there is a very precise mechanical counter for reading the height. the table is made of highly ribbed cast iron with an interchangeable spindle (a 40mm spindle can also be used) very robust and durable design; the machine was built for the most demanding milling operations and is suitable for all milling operations. optimal power transmission through belt drive with instruction manual Redps Afaugefx Airsch with 3-roller feed HOLZ HER ETX the feed has right/left rotation; the feed rollers are individually mounted and all are like new; it has 8 speeds the machine table is 1020mm wide and 980mm deep + 500mm wide extensions on the left and right the machine can be used immediately 380V, 7500W Weight: approx. 1000kg with all necessary safety devices; the machine is approved by the Holz-BG (German Wood and Furniture Employers' Accident Insurance Association). the machine weighs approx. 1000kg with motor protection switch against overload professional equipment, not cheap hardware store junk optimal, simple, fast and safe handling

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Rcedpozp E T Sefx Airjh Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: used, Zwick / Roell Type: BDO-FB0.5TH Zwick / Roell tensile testing machine, table-top testing machine Material testing machine BDO-FB0.5TH Testing load in tensile/compressive direction: 500 N Height: 1565 mm, Width: 292 mm, Depth: 469 mm Width of test area: infinite Test area depth: 100 mm Max. working distance without accessories: 1266 mm PC or printer interface: RS 232 Required PC connection (for PC operation): COM 1 Power data: 115/230 V (PH, N, PE) Rated power: 0.4 kVA Mains frequency: 50/60 Hz Weight: 47 kg Rcodpfx Aijzdr Hnsreh Condition: used Scope of supply: (autosampler as shown in the picture) (Subject to changes and errors in the technical data; details are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FA005TN.A50.002 Article No. Base Machine: 1004473 Z005 TN AllroundLine Table-Top The system is a comprehensively equipped ZwickRoell Z005 TN AllroundLine tabletop testing machine. The system has been specifically configured for mechanical and functional testing of automotive injectors and injection systems. In addition, the system features pneumatic sample holders, a visual color recognition system, and a precision scale, as well as extensive product-specific accessories. Technical data: Testing machine: Maximum testing force of the load frame: 5 kN Total testing space height: 1,164 mm Testing space height at the bottom without attachments: 1,030 mm Testing space height at the top without attachments: 1,015 mm Testing space width: 440 mm Crosshead speed: 0.0005 to 3,000 mm/min Return speed: max. 3,000 mm/min Deviation of the drive speed: max. 0.05 % Drive stroke resolution: 0.959431 nm Positioning repeatability: ±2 µm Control: adaptive Control cycle: 1,000 Hz Load cell: Type: Xforce HP Rated force: 0.5 kN / 500 N Suitable for static and dynamic tensile and compressive forces Accuracy class 1 from 1 N Accuracy class 0.5 from 5 N Maximum operating force: 150 % of the rated force Limit force: 150 % of the rated force Breaking force: 300 % of the rated force Protection class: IP54 Connection thread: M28 × 1.5 Connection pin: Ø 20 mm Measuring and control electronics: ZwickRoell testControl II machine electronics DCSC measuring module for strain gauge load cells Measured value acquisition rate: 400 kHz Measured value transmission to PC: 500 Hz Automatic zero point correction Measured signal time correction Ethernet interface to PC Measuring amplifier for strain gauge full bridges Measuring range: 0.2 to 165 % of the rated measured value Measured value acquisition rate of the DCSC module: max. 10 kHz Force measurement technology according to ISO 7500-1 and ASTM E4 Testing device for automotive injectors: Article No.: 3002956 Maximum testing force: 200 N Dimensions: approx. 396 × 235 × 309 mm Weight: approx. 20 kg Pneumatic sample holders: Article No.: 3001461 Maximum testing force: 200 N Maximum opening width: 40 mm Closes on both sides and symmetrically Interchangeable clamping jaws Dimensions of the load frame: Height without base profiles: 1,314 mm Height with base profiles: 1,528 to 2,108 mm Width without base profiles: 680 mm Width with base profiles: 856 mm Width including machine electronics: 1,044 mm Depth with base profiles: 650 mm Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 161 kg Base profiles: approx. 31 kg Machine with typical attachments: approx. 226 kg + Laser measuring system / visual color recognition system from Keyence + Precision scale: Article No.: 085770 Maximum load: 220 g Readability: 0.1 mg Repeatability at 200 g: 0.1 mg Linearity: 0.25 mg RS232 interface for data transmission Separate weighing cell, display unit and operating terminal + PC with ZwickRoell testXpert III testing software, version 1.2 + Microphone and many other accessories shown in the pictures Condition: used Rcsdpfezwvu Nex Airjh Optical condition according to the pictures Functional scope according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Shipping or freight shipping is possible. Subject to changes, errors and prior sale.

Condition: ready for operation (used), Year of construction: 2011, DELTA LC 500 – Circular table grinding machine - CE marking - Year of manufacture 2011 - Magnetic table – Rotary table 500 mm - Max. grinding diameter 500 mm - Distance column – grinding spindle axis 315 mm - Grinding height max. magnetic clamping plate – grinding wheel 215 mm - Grinding spindle speed 2840 rpm - Fine adjustment via micrometer 0.01 mm - Coarse adjustment (height adjustment) motorized via keyboard Rodpjzkvz Nsfx Airsch - Spindle motor 3 kW - Dimensions of the grinding wheel 200x80x78 mm - Machine enclosure - Coolant system - Documentation Dimensions: L x W x H 1.3 x 0.8 x 1.8 meters / Weight 800 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 76-1302, overall weight: 7,900 kg, input voltage: 380 V, input frequency: 50 Hz, Schneider CNC die-cutting machine, Type 2032, with vibrating table, Type 3041 For sale is a high-performance CNC die-cutting machine from the Swiss quality manufacturer Schneider Maschinenbau AG, including a vibrating table, Type 3041. The system is ideally suited for processing and die-cutting cardboard, corrugated cardboard, and packaging materials. Thanks to its robust industrial design, the precise NUM-750 CNC control system, and the automatic material handling, the machine still offers an economical solution for many packaging and display applications today. Technical data, Schneider Type 2032 Year of construction: 1992 CNC control: NUM 750 Power: 28 kW Voltage: 380 V / 50 Hz Operating pressure: 100–240 bar Machine weight: approx. 7,900 kg Swiss Made Vibrating table, Type 3041 Year of construction: 1986 Power: 3 kW Weight: approx. 1,600 kg Equipment CNC-controlled die-cutting system Hydraulic clamping system Automatic material feed Pneumatic hold-down devices Includes vibrating table Extensive conveying and feeding system Condition The machine comes from industrial use and can be inspected by appointment. Sale includes all existing system components as shown in the photos. Total weight of the system: approx. 9.5 tons Redpfxjz R Dnce Airoch Inspection possible at any time by arrangement. Loading and transport are the responsibility of the buyer.

Condition: good (used), Fetra Table top Cart 127x80cm with 3 shelves Perfect condition, like new. Modular design. Rcjdpfx Aisy Sd Tfereh Powder-coated blue. Non-marking thermoplastic rubber tread, wheels with precision ball bearings. 2 swivel wheels with brakes and 2 fixed wheels. Load capacity: 500 kg

Year of construction: 2024, condition: like new (used), functionality: fully functional, Sure. Below is a technical and commercial description suitable for product presentations, catalogs, or proposals: ### Mertmakina Mattress Packaging Machine with Integrated Quality Control System The Mertmakina mattress packaging machine is an industrial solution designed to automate and optimize the mattress packaging process, ensuring speed, uniformity, and quality in the final product packaging. The equipment integrates a quality control system, allowing for the monitoring of key stages in the packaging process and the identification of potential anomalies before the product leaves the line. #### Key Features * Automatic mattress feeding and positioning, ensuring a continuous and regular process. * Automatic packaging system, adapted to the dimensions and characteristics of different mattress models. * Control of the application and sealing of the packaging, ensuring a uniform and consistent finish. * Integrated quality control system, designed to verify process parameters such as positioning, packaging integrity, and proper sealing. * Error and anomaly detection, with the possibility of signaling or automatic rejection of units that do not meet the defined parameters. * Intuitive operating interface, allowing the operator to monitor the machine's status, adjust parameters, and consult process information. * Recording and monitoring of production and control data, contributing to traceability and continuous improvement of production. * Robust industrial construction, suitable for operation in continuous production environments. * Increased productivity and reduced manual intervention, while simultaneously reducing variability between packages. ### Integrated Quality Control The integration of quality control transforms the machine into a more complete production and inspection system. Each mattress can be monitored during the process, allowing verification of whether the packaging has been correctly applied and whether the product meets the previously defined parameters. When a condition outside the established limits is detected, the system can generate an alert for the operator and, depending on the installed configuration, automatically direct the product for inspection or rejection. Rsdpfx Asz Dk Aroirsch In this way, the solution helps to reduce packaging errors, increase the consistency of the final product, improve traceability, and reduce waste. ### Result The Mertmakina mattress packaging machine, equipped with an integrated quality control system, provides a solution focused on automation, productivity, standardization, and process control, enabling companies to increase the efficiency of the production line and ensure a consistent final presentation of the mattresses.

Condition: good (used), Year of construction: 2008, Hydraulically Height-Adjustable Pallet Truck from Witte - Alufix for loading coordinate measuring machines With Hovercraft Air Bearing Plate Pallet truck with hydraulic height adjustment from approx. 660 mm to 950 mm. Table top coated with a roller on the broad side for bridging height differences between the table and measuring plate. Internal dimensions approx. 900 x 700 mm. Eurofix air bearing plate with handle and integrated air valve for easy movement and positioning of heavy workpieces on coordinate measuring machines. The surface is equipped with 50 mm grid pattern boreholes. The holes have a diameter of 12.5 mm, a depth of 7 mm, and M6 threaded inserts at the base. Rjdpjw Nylkofx Airoch The air supply can be activated via the valve integrated in the handle, allowing the entire plate with the mounted measuring object to be moved very easily. Usable area (aluminum) is approx. 600 x 600 mm. Ideal for Witte Alufix clamping systems for fixture construction in the automotive sector, etc. Dimensions approx. 1000 x 800 x 660/950 mm (LxWxH). Weight approx. 100 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See "more offers from this supplier."

Condition: ready for operation (used), functionality: fully functional, DELTA LC 400 / Rotary table grinding machine -Max. grinding diameter 400mm -Magnetic chuck -Grinding height / distance between table and grinding wheel approx. 230mm -Spindle speed 2850 rpm -Fine feed 0.01mm -Distance between column and grinding wheel axis approx. 320mm -Spindle motor 3 KW -Grinding wheel dimensions 200x80x78mm -Machine enclosure Rcsdpfjz Nkf Eex Airjh -Coolant system -Documentation Dimensions: L x W x H 1.2 x 0.8 x 1.8 meters / Weight 700 kg Errors and omissions excepted.

Condition: as good as new (ex-display), Receiving table for LT series machines, with side sheet metal panel. Rcjdszn It Ejpfx Airsh Length: 1.8 m, with a 2.5 m sheet metal panel. Width: 627 cm. Height: 754 cm.

Condition: used, functionality: not functional, rotary table diameter: 1,000 mm, total height: 2,900 mm, total width: 2,400 mm, total length: 3,700 mm, overall weight: 10,000 kg, type of input current: three-phase, table diameter: 1,000 mm, We offer this used ELB-Schliff rotary table grinding machine. Rjdpfxs Aat Ntj Airech A rough footprint is 3700mm L x 2400mm H x 2900mm H. 1000mm diameter table. It has a horizontal spindle (Not segmented wheel). Slides look really nice, however it requires electrical upgrade. Mechanically the grinder is in excellent condition. The magnetic chuck & slideways appear to be in excellent condition. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2013, functionality: fully functional, operating hours: 334 h, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, total height: 1,600 mm, total length: 6,600 mm, total width: 1,250 mm, overall weight: 2,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We are offering this used OTT TORNADO-TOP edge banding machine, manufactured in 2013, for sale. The machine is in very good condition and was rarely used. It was only used to process PUR adhesive for custom-made products and individual pieces of furniture. No series production was carried out. The reason for the sale is the closure of the business! Type: TORNADO-TOP Year of manufacture: 2013 Power supply: 3~ N+PE Frequency: 50 Hz Rated voltage: 3×400 VAC Rated current: 31 A Rated power: 17.5 kW cos φ: Control voltage: 24 VDC Rcodpfxszvqcls Airsh Maximum fuse rating: 35 A Conductor cross-section: 5×6 mm² If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Double table machining center Working range X 2,590 mm Working range Y 2,260 mm Rsdpfxjuqw E No Airjch Working range Z 400 mm Number of milling spindles 2 Liquid-cooled spindle Main motor 19.2 kW Max rotational speed 24,000 rpm Aggregate heads 4 C-axis Tool clamping system HSK-F63 Tool change positions central magazine 24 Tool change on each head from 12 positions Boring heads vert. 20 (for each head) Horizontal boring heads X 8 Horizontal boring heads Y 8 Blade for grooves in X, in Y 2 Platens Number 4 360 m³/h vacuum pumps T Jet system for chip blowing Nesting Manual labeling Bar code reader Tool length measurement Software BIESSE BIESSEWORKS ADVANCED, BIESSE B_NEST Weight 17,900 kg

Year of construction: 2006, condition: ready for operation (used), TETRA PAK ESL GABLE TOP FILLING MACHINE FOR 1000/500/300 ml WITH TWIST CAP APPLICATOR TETRA REX TR22 FILLER YOM 2006 ESL UNIT INCLUDED Rodpfx Aiez E U Dversch CAPACITY 2800 CARTONS PER HOUR 13.300 RUNNING HOURS EXCELLENT TECHNICAL CONDITION

Condition: good (used), Year of construction: 2006, I sell the 3-side brushing machine Wikoma SP-3/300 - 1350/2x15°/P, Year 2006. 2 pcs. Surface brushes from top Working width 1350mm Rcedpfxovyln Io Airjh Vacuum underpressure table with ventilator. Adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Made in Italy Available immediately.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, I am selling this machine. A video of the machine can be sent via WhatsApp. It can be tested while connected. Very good condition. X 11,500, Y 3,150, Z 2,000, clamping M 100 Rcodoxwl Tbepfx Airjh Includes a support column, 6 pieces of boards with dimensions 6,500 x 1,850 x 400 mm. Rotary table E 20. Heads, etc. This is a complete workstation. Weight approximately 200,000 kg.

Condition: used, Offered is a rotary table machine with safety enclosure. Equipped with: Transparent protective enclosure, rotary table in the working area, stainless steel cladding, mobile machine base and side-mounted assembly. Inspection possible by arrangement. Rcjdps Agwrfjfx Airsh

Condition: used, Year of construction: 1933, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,259 mm, travel distance Z-axis: 1,500 mm, table length: 1,250 mm, table width: 1,400 mm, overall weight: 10,500 kg, x-travel 1600 mm Rjdpfoz Aun Ssx Airech y-travel 1259 mm z-travel 1500 mm tool adaptor SK 50 weight 10,5 t output 49 kw feed 6000 m/min control Heidenhein 151 1600 min table: 1250-1400 mm serial number 1933 weight of the machine ca. 10,5 t

Condition: used, Year of construction: 1994, functionality: fully functional, overall weight: 27,000 kg, spindle diameter 125 mm x-travel 2000 mm y-travel 1600 mm Control Siemens 840 C z-travel 1400 mm 600 mm Rcedpfoztfwxex Airjh ja total power requirement 40 kW weight of the machine ca. 27 t