Used Polishing Table for sale (39,749)

Condition: used, - engine (hp): 1/1.9 - engine (rpm): 710/1420 - Motor (V): 380 - Motor (A): 3.7/3.8 Tjdom R Iljpfx Ac Nsf

Condition: used, Year of construction: 1976, We are selling a used rotary indexing table with four polishing stations. This rotary table is also equipped with four rotary unions. The polishing stations are designed for polishing wheels with a maximum diameter of 500 mm. The stations feature automatic feed. The drive power of the polishing stations is 5.5 kW. Tedpfxexxv D Hj Ac Nef If you have any further questions, please feel free to contact us!

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Tsdpfxslccvme Ac Nsf Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Manufacturer: Hau Rotary table with 6 working spindles and 3 polishing stations with high pressure guns, 5,5 kW motors, Tedpfx Aoh Ug Ulec Nef control cabinet

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1000 (maximum part processing length 1000 mm, respectively), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. Todpfx Ajw Avptec Nsf New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: good (used), Used rotary indexing table polishing machine Manufacturer: Hau Tsdpjqmfv Ssfx Ac Nef Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, 5.5 kW motors, gripper clamping system, switch cabinet

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. Tedpfxow Au A Ee Ac Nsf The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: like new (used), functionality: fully functional, Year of construction: 2016, Machine for washing and polishing potatoes, carrots and celery. Pro-Vega MV-1428R 2016 year Slightly used, the machine is like new Tsdpfx Acewlq N He Njf We speak English, we speak Deutsch

Condition: good (used), Rotating table Lazy Susan Perfect for buffering products, bags or trays prior to further handling. This to prevent from overflowing and giving several issues in (automatic) production lines. Height: 80 cm (height is adjustable) Tedpfotpgxiox Ac Nof Diamter: 120 cm

Condition: good (used), Table size:1500x1500mm Tsdofvqmxjpfx Ac Nsf Capacity : 6t Dimension: 1600x2500x2000mm Hydraulic

Condition: used, Outfeed table before resaw IDL000793 Tedjul Rgvjpfx Ac Nof

Condition: good (used), Hard cover assembly table The device is fully functional and in very good condition. Technical data: Todpfx Acsvkt N Uj Nof Max. binding width 810mm. Power supply: Pneumatic Weight: 140 kg Equipment: – elements for fixing the cardboard – module for wrapping the cover

Condition: repair required (used), functionality: limited functionality, For sale Vecoplan infeed table. Can be used for infeeding up to 3.1meter long woodwaist to chipper feeder. Tjdpfxevuk Uio Ac Nof

Condition: new, Year of construction: 2024, functionality: fully functional, Automatic Polishing Machine Sanyi SY-T200 year 2024 The SY-T200 is a closed internal circulation sandblasting machine designed for the surface treatment of hard alloy tool workpieces. It operates using a negative pressure jet blasting method, where compressed air draws in abrasive material to efficiently process surfaces. The machine features an independent dust extraction and filtration system that minimizes dust pollution and allows abrasive reuse, ensuring cost-effectiveness and environmental protection. Its structure includes a working chamber, rotating worktable, spray gun group with lifting mechanism, dust removal system, and electrical control unit. Tjdpfx Aowcftbjc Nef

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm - height: 950 mm Hydraulic lift, lifting capacity around 1 ton. Todpfx Ajtddw Ajc Nsf

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m Todpfou Smq Sjx Ac Nsf - Rema Scanner - log infeed conveyor

Condition: ready for operation (used), functionality: fully functional, MACHINE DETAILS Machine type: Manual edge stripping system Alignment: Aligned against stop rails Fixation: Integrated suction cup for fixation EQUIPMENT Side table for manual edge decoration Side-guided sanding heads Manually adjustable sanding pressure Tjdpfoxurq Uex Ac Nsf

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 309002, No minimum price – guaranteed sale to the highest bidder! Tedoxygdmjpfx Ac Njf By placing a bid, you commit to collecting the item by 31/12/2025!

Year of construction: 2025, condition: new, Rotary Table Blasting Machines provide efficient and uniform surface cleaning for castings, forgings, and metal components. Using a rotating table and high-performance blast wheels, they remove rust, scale, paint, and contaminants to prepare parts for coating or further processing. Ideal for small to medium batch production, these machines offer consistent quality, reduced manual labor, and reliable performance in industrial environments. Todpfsxzzi Tex Ac Nsf

Condition: used, Year of construction: 1999, functionality: fully functional, Lot consists of: (2) Lot of 2 manual polishing machines Tsdpfx Aexz Dzljc Njf Technical details: 960 mm diameter wheel

Condition: excellent (used), For sale: Professional CNC rotary table from the renowned brand Fadal Engineering (USA, subsidiary of Giddings & Lewis Inc.), model VH65. Equipped with a Röhm ZG Ø125 mm lathe chuck, significantly expanding application versatility. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Röhm ZG Ø125 mm lathe chuck – max 4000 rpm, torque 80 Nm • Serial number: 6660297 • Industrial multipin connector Condition: used, fully mechanically functional, normal signs of use. Sturdy, heavy-duty construction guarantees precision and long service life. Ready for use as an additional 4th axis in a machining center. Tjdpow R Syiefx Ac Nof

Condition: excellent (used), Year of construction: 1982, Spindle diameter: 100mm Table: 1250x1250 Cross: 1600mm YOM: 1982 Tjdpfxsxz Dqao Ac Nef

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, cutting length (max.): 3,300 mm, cutting width (max.): 2,550 mm, section length (min.): 700 mm, TECHNICAL DETAILS Todpfxoxurpke Ac Njf Working dimensions min.: 700 x 300 mm Working dimensions max.: 3,300 mm to 2,550 mm MACHINE DETAILS Required space: 6,308 x 2,830 mm EQUIPMENT Low grinding table Swivelling loading arm Manual cutting system Note: Further information regarding the machine layout can be found in the attached images.

Condition: used, Year of construction: 2017, Type: CNC Polishing Machine Manufacturer: Diema Tedpfxjxnmtdo Ac Nsf Model: CNC-Maxi Year of Manufacture: 2017 Serial Number: 22.003 Condition: Used Quantity: 1

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Tsdow R St Nspfx Ac Njf