Used Table Polishing Machine for sale (67,213)

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Kledpolccvmofx Afpot Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: used, machine/vehicle number: HR6-1200, Used rotary indexing table polishing machine HR6-1200 Manufacturer: Hau Rotary indexing table with 6 working spindles and 3 polishing stations equipped with high-pressure guns, 5.5 kW motors, Pneumatic clamping with Schunk PZN 100 clamping grippers, Schunk distributor. Kljdpfx Afoyntrhjpet Control cabinet. Three rotary table polishing machines are available.

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + Kledpfew Au A Ejx Afpot 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1000 (maximum part processing length 1000 mm, respectively), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. Kledpfx Aow Avptsfpjt New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Kjdpfjh Ug Uljx Afpslt Manufacturer: Hau Rotary table with 6 working spindles and 3 polishing stations with high pressure guns, 5,5 kW motors, control cabinet

Condition: good (used), Used rotary indexing table polishing machine Manufacturer: Hau Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, Klsdpfjqmfv Sex Afpst 5.5 kW motors, gripper clamping system, switch cabinet

Condition: used, Year of construction: 1976, We are selling a used rotary indexing table with four polishing stations. This rotary table is also equipped with four rotary unions. The polishing stations are designed for polishing wheels with a maximum diameter of 500 mm. The stations feature automatic feed. The drive power of the polishing stations is 5.5 kW. Kledpfx Afsxxv D Hopst If you have any further questions, please feel free to contact us!

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Kjdpfsxvwcxsx Afpslt Table Loading Capacity: 1.1(ton)

Condition: used, Year of construction: 2013, functionality: fully functional, Mobile valve machining / turning machine Unigrind FDA 500 for sale. The machine is used, in good condition and fully operational. Inspection and testing on site are possible. The Unigrind FDA 500 is designed for machining and repair of valve sealing surfaces, seats, and flanges. The equipment allows precise turning, milling, and surface refurbishment directly at the worksite. Ksdpfey R R Imsx Afpjlt Specification: Model: Unigrind FDA 500 Year: 2013 Mobile valve machining machine Suitable for repair of valves, flanges, and sealing surfaces Accurate machining of flat and conical surfaces Fits various types of industrial valves Compact and robust design Professional industrial equipment German quality More info: Unigrind FDA 500 Suitable for energy, oil, gas, chemical, and industrial companies as well as repair workshops. If you have further questions, we will be happy to assist you.

Condition: used, Year of construction: 2019, functionality: fully functional, For sale: Unigrind KSM600 flat surface grinding/lapping table. The equipment is in good condition and fully operational. Inspection and testing on site are possible. The Unigrind KSM600 is designed for grinding and lapping flat sealing surfaces. It is suitable for machining and refurbishing surfaces of valves, gates, flanges, and other industrial components. Specification: Model: Unigrind KSM600 Stationary flat surface grinding/lapping table Intended for machining flat sealing surfaces Suitable for valve, gate, and flange repair Robust industrial housing Stable and precise processing Simple and user-friendly operation Professional industrial equipment More information: Unigrind KSM600 Suitable for repair workshops, energy, oil, gas, and industrial companies. Kjdpfx Afsy R Rl Sspslt If you have any further questions, we will be happy to assist you.

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) Kodpfodzqn Djx Afpjlt - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: used, Semi-automatic table punching machine Kjdsy Tzdkepfx Afpelt Working width max. 340 mm Punching thickness up to 3.5 mm (recommended 2.0-2.5 mm) Mechanical cycle rate up to 1,200 per hour Tools: 2:1, 6.0 mm, Ø 2:1, 6 x 6 mm, Square

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Kjdpfxeyi A Tdj Afpslt Storage location: Nattheim

Condition: used, Universal swivel, tilting, and rotary table DECKEL Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees - Swivel table, tilting table, angle table Permissible load max. 1000 kg Weight: 400 kg Ksdpfxed E A I No Afpjlt Good condition

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Kodpfx Asdzp T Njfpslt Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technische Details Werkstückdurchmesser 1000 mm Werkstückgewicht - kg Werkstückhöhe - mm Steuerung Schleifspindelmotor 11 kW Gesamtleistungsbedarf 25 kW Maschinengewicht ca. 6500 kg Raumbedarf ca. 4100 x 3200 x 2600 mm Zusatzinformationen Maschine kommt aus einer Betriebsschließung Ausstattung: Kühlmitteleinrichtung 500 Liter mit Papierbandfilter 4 Stück Schleifscheiben (3 Stück unbenutzt) Technische Daten: Rundtischdurchmesser 800 mm Kledpfxoy Tlrro Afpst Max. Abstand Rundtisch zu Schleifspindelmitte 850 mm Schleifscheibendurchmesser 400 mm Schleifscheibenbreite 80 mm

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Kjdsw R St Nopfx Afpjlt

Condition: used, machine/vehicle number: 008470, X axis working area: 4300 mm Y axis working area: 2205 mm Working Table: Flat table Klsdpjyzyrvefx Afpst Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 46 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 006228, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 9 KW Kjdpfx Afjy Nkwrjpelt Number of controlled axes: 3 axes Total number of drilling spindles: 7 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 007087, X axis working area: 4300 mm Y axis working area: 2200 mm Working Table: Flat table Main Electrospindle power: 12 KW Kledpsy Nkrvofx Afpst Number of controlled axes: 4 axes Total number of drilling spindles: 40 Total number of tool changer positions: 30

Condition: used, machine/vehicle number: 005947, X axis working area: 2500 mm Y axis working area: 4300 mm Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of tool changer positions: 28 Klsdpey Nkpuefx Afpjt

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Y axis working area: 2245 mm Working Table: Flat table Main Electrospindle power: 9 KW Kedpfxju N Skfs Afpolt Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 005289, X axis working area: 7400 mm Kledpowcyacefx Afpjt Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 10 Total number of tool changer positions: 14

Condition: used, Used machine with 2 discs for polishing Disc diameter approx. 500 mm Disc thickness approx. 80 mm Kjdpfx Asy Nug Defpelt Motor 400 V Availability: short-term Storage location: Röllbach

Condition: good (used), Manufacturer: INNOCENTI Type: PM 325 FT Year of construction: 2012 Specifications: Metric Metric US Standard Table length 4250 mm Table width 4250 mm Table load Ksdpstwllfsfx Afpslt 130.000 V-axis feed 3000 mm B-axis rotation 360.000 ° High-speed rotation B-axis 0.16 - 34.5 Omw/min. Dimensions (estimate) length 8000 mm width 4250 mm height 2000 mm weight 62500 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.