Used Polyester Granules for sale (841)

Condition: as good as new (ex-display), Year of construction: 2025, SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Medium smoke and dust Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Technical data Procedure 2-speed Filter type disposable filter Filter surface approx. 20 m ² ᐳ 99% filtration efficiency Filter material of non-woven polyester Welding smoke off vagina class W3 Additional filter pre-filter (ALU knitted fabric) Basic data suction capacity Max 1,100 m³/h Extraction arm diameter Ø 150 mm Extraction arm, length 3 m Diameter suction connection Ø 150 mm -. Power supply 3 x 400 V / 50 Hz Tsdpfx Acedqzcvo Nef Motor 1,1 kW Noise level 70 dB(A) Dimensions (W x D x H) 790 x 815 x 1080 mm Weight 71 kg approx. 120 kg

Condition: excellent (used), Year of construction: 2007, Used block and paver stone production machine Omag 1200x1100 from 2007. Equipment includes: cement silo with screw conveyor, ACT/Wiggert 1875 L mixer, Eagle granulate coloring machine, Marcotte dosing system, Besser/Omag concrete transport system, Conv System concrete transport system, concrete feed hopper, Systeg block production machine (without face-mix capability). Capacity: 2.8 to 3 cycles per minute. We produced products ranging in height from 36 to 90 mm. Omag wet conveyor (front), Omag materials (slab) tipper, Omag elevator, Omag finger car, Omag lower conveyor, Omag gap closer, Omag dry conveyor for cubes, Omag pallet feeder Cuber, Omag slab and cube conveyor, Omag Cuber, Omag slab brush and flipper, Omag rear plate return conveyor, Omag plate return conveyor, Omag power panels, Omag wet side hydraulic unit, Omag dry side hydraulic unit, Siemens PLC controllers, steam generator. 1,220 used plastic production boards, dimensions 1200x1100 mm (production area 1040x1040 mm). Available mid-2026. Tedpexzppuefx Ac Njf

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw Tjdpfx Acsxxk Aks Nsf With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 3074, feed rate Y-axis: 10 m/min, total length: 4,984 mm, workpiece height (max.): 60 mm, total width: 1,425 mm, edge thickness (max.): 3 mm, total height: 1,618 mm, overall weight: 1,400 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, extraction nozzle diameter: 140 mm, working height: 888 mm, input current: 32 A, input frequency: 50 Hz, extraction connection diameter: 140 mm, year of last overhaul: 2025, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle - Gluing station - End trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle - Flat scraper - Polishing wheel Tedpexlr S Hsfx Ac Njf Price does not include VAT.

Year of construction: 1987, condition: used, functionality: fully functional, machine/vehicle number: 17526, For sale: aluminium silo suitable for storing granulate, 4 units available. The price is per unit. Tedpfx Acoxx Nnlj Nof

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator, Drive power: 250 kW, control cabinet with star-delta switching Rotor length: 1200 mm, Rotor diameter: 800 mm, Number of blades/rotor: 36 pcs, Number of blades/stator: 4 x 6 pcs, 2 hydraulically rotatable stators each with 2 rows of counter blades, Hydraulic pusher, Bearing temperature monitoring, Central lubrication for the rotor bearings, Net weight: 29,800 kg, Tedoxiw Hwjpfx Ac Nof Year of manufacture: 2005, overhauled in 2025, all wear parts replaced. Available from approx. December 2025.

Condition: excellent (used), Year of construction: 2017, Weima Wood Shredder - Walking Floor Shredder - Low-Noise and Slow-Running Top condition - only 150 operating hours - Type: WL 600 Shaft diameter (mm): 260 Knife length (mm): 600 Knife shaft speed (rpm): 80 - 125 Number of knives (pcs): 14 Max. granulate size (mm): 20/25 Opening (mm): 600 x 800 Extraction port diameter (mm): 160 Motor power (kW): 15 Voltage (V): 400 Working height (mm): 1645 L x W x H (mm): 1,805 x 1,118 x 1,645 Todpfx Aexiq Syec Nsf Weight (kg): 1,100 Location: ex-stock 54634 Bitburg - available immediately - Subject to prior sale

Condition: used, Year of construction: 1996, Plate running direction: from operator to the left Max. edge thickness: 8.0 mm Min. workpiece width: 70 mm Feed speed: 11 m/min Heating-up time: 4.5 min Automatic roll magazine: Yes Cutting shears up to: 0.2 - 3.0 mm Individual edge feed: Yes Automatic gluing: Glue pot with granulate on top Cut-off saw: fixed at 90° Flush-milling unit: Yes Combination milling unit: Yes Aggregate display: glue display Control type: manual Operation: selector switch / push buttons Travel device: Yes Protective hood: Yes Working height or infeed table height: 870 mm Approx. weight: 670 kg Dimensions: 3600 x 1400 x 1200 mm Motor power: 11 kW Extraction diameter: 120 mm Storage location: Supplier Tsdoxwdp Uspfx Ac Njf

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw Tsdpfxsxxky Ao Ac Nof With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: new, functionality: fully functional, Conveyor Belt EP 630/4 – 800 mm – 5+2 – 15 MPa – PE/PA For sale is a high-quality conveyor belt with the following specifications: Width: 800 mm Type: EP 630/4 Polyester/Polyamide tension members Tensile strength: 630 N/mm 4 fabric plies Cover plates: 5 mm top / 2 mm bottom Rubber quality: 15 MPa (standard industrial grade, abrasion-resistant) Material: PE/PA Condition: New / unused Length: 40 m Areas of Application Ideally suited for use in: - Quarries & gravel plants - Recycling facilities - Agriculture - General industry and conveying technology Benefits - High tear resistance - Durable covers - Good abrasion resistance - Suitable for medium to heavy-duty conveying tasks Tedexy Nt Ropfx Ac Nsf

Condition: excellent (used), Here we offer a used Datona mobile sandblasting unit. Datona mobile sandblasting unit DUO - 74 liters SKU DT-55212 Advantages and disadvantages: 2.5 m long hose for a long reach Easy to switch between blasting agents thanks to the mixing valve When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting machine is used for removing paint and rust. Thanks to the two boilers, you can choose from two different blasting media. The mobile sandblasting unit works with a pressure of 4 to 8 bar and requires a compressor with a suction capacity of at least 350 l/min. Double boiler: If blasting with soda or calcium carbonate does not achieve the desired result, simply try a different blasting agent. For a more effective effect, it is also possible to use both blasting agents at the same time. Tjdpoqcuvwsfx Ac Nef With the sandblaster, you have a practical machine in your home. With the help of the special mixing valve, you can use soda to easily and gently remove paint from steel, stainless steel, chrome, aluminum or polyester. A major advantage of blasting with fine soda is that the surface of the object to be of the object to be blasted is not damaged. You don't even have to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop as well as on site. Attention: The one boiler is only suitable for soda and calcium carbonate!!! ✓ Duo sandblasting unit ✓ 74 liter boiler capacity ✓ Air consumption is around 350 l/min Technical data: SKU DT-55212 Weight 33 kg Suitable blasting material Aluminum silicate Dato-Blast calcium carbonate soda Blasting cabinet connection 1/4" Max. Pressure 2 - 6 bar Minimum air consumption 350 l/min Min. compressor tank capacity 100 liters Type: DT-55212 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Todpewivdkefx Ac Nef Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Tjdecnw U Depfx Ac Nsf Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: used, No. 10028 Cable granulation plant FRS BK 60 Used According to our customer, the machine is fully functional and can be inspected and tested on site Cable granulating system for up to approx. 1000 kg of cable per hour (according to our customer) Motor and blades were renewed in 2025 Rotor dimensions 610 x 500 mm 14 blades Motor power 45 kW Incl. magnetic conveyor belt Tedpfx Acexwdndo Njf Cylinder size 400 x 120 mm Motor power 1.5 kW Incl. sieve with two outlets Motor power 0.35 kW Installation dimensions approx. 7000 x 6000 mm LW Transport dimensions approx. 6000 x 2400 x 2600 mm LWH Weight approx. 6000 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Errors in the description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Tjdpfx Aoxxkvksc Nsf Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: new, functionality: fully functional, Conveyor Belt EP 650/3 – 800 mm – 6+3 – 15 MPa – PE/PA For sale is a high-quality conveyor belt with the following technical specifications: Width: 800 mm Type: EP 650/3 Tedpfx Acjxy Nr To Nsf Polyester/Polyamide fabric plies Tensile strength: 650 N/mm Construction: 3 fabric plies Cover plates: 6 mm top / 3 mm bottom Rubber quality: 15 MPa (standard industrial grade, wear-resistant) Material: PE/PA Condition: New / unused Length: 196 m Applications Ideal for use in: Quarries & gravel plants Recycling facilities Agriculture General industry and conveying technology Advantages High tear resistance Durable covers Good abrasion resistance Suitable for medium to heavy-duty conveying tasks

Condition: excellent (used), Labotek Type: FMD-M-M-15-15-V Model 101134 The Labotek FMD-M-M-15-15-V model is part of the FMD-M series by Labotek, a leading manufacturer of material drying, dosing, and conveying systems for the plastics industry. The FMD-M series comprises modular dryers designed for processing plastic granules. Technical Specifications of the FMD-M Series Model designation: FMD-M 15/15 Dimensions: 80 x 120 x 120 cm Net weight: 88 kg Shipping weight: 113 kg Shipping dimensions: 80 x 120 x 120 cm Shipping volume: 1.15 m³ These dryers are specifically designed for processing plastic granules and are characterized by their modular construction, allowing flexible adaptation to a wide range of production requirements. Voltage: 3x400 Vac+PE Current: 10.4 Amp Overcurrent protection: 16 Amp Power: 2.6 kW Frequency: 50/60 Hz The Labotek AVR3G is an industrial vacuum conveyor with a 1-liter capacity, designed for the automatic conveying of free-flowing plastic granules. It is particularly suitable for small to medium-sized production facilities where space and weight are critical factors. Technical data for Labotek AVR3G (1 liter): Capacity: 1 liter Conveying capacity: Up to 15 kg/h Conveyed material: Free-flowing, granular raw material (minimum grain size 3 mm) Tedpfjwwh Evsx Ac Nof Operating noise level: Below 69 dB Material contact surfaces: Stainless steel AISI 304 Maximum material temperature: 80°C Alarm function: Low material level Power supply: Compatible with 50/60 Hz Weight: 88 kg Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data. Details are provided without obligation!) If you have further questions, we are happy to assist you by phone.

Condition: new, Year of construction: 2024, Paint set: Powder coating furnace 1200 x 1500 x 1800 mm Powder coating booth 1400 x 1400 mm Complete kit for manual powder application OVEN / DRYER TECHNICAL DATA: Working dimension (mm): 1200 x 1500 x 1800, • Power consumption: 20 kW. EQUIPMENT: • Trolley inside, • Outdoor trolley, • True Fan Cooking (Equal temperature throughout the furnace), • Locks for safe opening and closing. POWDER CABIN: Working dimension (mm): 1400 x 1800, Tsdpfx Acjhd Nras Nsf Fan power: 1,5 kW, Fan capacity: 6 500 m³/h, Very quiet operation, Automatic filter cleaning. COMPLETE KIT FOR MANUAL POWDER APPLICATION The Inocart VT manual powder application kit is ideal for the even application of powders such as polyester, epoxy or acrylic, which are delivered in 20 kg cartons. * Constant and even spraying ensuring smooth and uniform painting, * A well-balanced gun that is comfortable to use, * TEC5 technology ensuring high quality of painting finish, * 3 factory settings for quick commissioning, * 99 client settings, * Inobox height adjustment for comfortable work with the control, * Strong cascade ensuring the effect of powder curling around the detail, * High transfer efficiency minimizing the painting time, * Advanced HV control for perfect coverage of hard-to-reach parts, * Powder flow rate adjustment, * Stepless electric vibrating table, * Self-locking hook for gun and pump maintenance during cleaning, * Footrest for easy carrying of the Inocart device, * Unbeatable cascade lifetime, * Monitoring of wear parts for replacement in the right time. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Year of construction: 2019, condition: new, Booth KPZ-4P • Booth Type Closed drive-thru • Worksize dimensions 3500 width x 1800 height x 1000 depth • Overall dimensions 3300width x 2300 height x 1800 depth • Power supply Electric • Nominal power 0,69kW x4 • Voltage 380V • Frequency 50-60Hz • Filters 100% Polyester • Filters count 4 • Filters hang type Bagnet type, easy on/off • Filter area 30m2 • Filter cleaning system Pneumatic - Jet Venturi Todpfx Asbxmfnjc Nof • Ventilator type Aluminium ray rotor . • Air consumption 20,400m3/h • Loudness 74dBa • Doors Double, both side • Inside drive diameter 800mm

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Beveling and Packaging Machine – Packtech AF-35 A professional solution for fast and precise packaging of bulk products. The Packtech AF-35 is a pneumomechanical vertical machine designed for weighing, dosing, and packaging bulk products in “pillow” type bags. It is ideal for packaging pellets, grains, salt, sugar, feed, fertilizers, and other free-flowing materials — even in large doses up to 50 kg. Thanks to its weight-based dosing system, the machine guarantees high accuracy (error 0.5–1%) and a wide operational range from 2 to 25 kg per portion. The machine operates fully automatically, requiring minimal operator intervention. The machine can work with loading conveyors, allowing automatic maintenance of product level in the hopper. Its construction meets ISO 12100:2010 safety standards, and all product-contact parts are made of stainless steel. Key Advantages of AF-35: - High efficiency – 1–5 cycles per minute depending on the product - Precise weight-based dosing for various bulk materials - Wide dosing range: 2–25 kg Tsdpfx Acoxx Sdvs Nef - Fully automatic operation with minimal supervision - Wide film compatibility through impulse sealing (PE, PP, laminates) - Robust construction – combination of carbon steel and stainless steel - Safety and compliance with ISO standards Technical Data: - Power supply: 400 V, 3.5 kW - Pneumatics: 6 bar, 500 l/min - Machine dimensions: 2900 × 1800 × 4600 mm - Weight: 960 kg - Film thickness: 20–130 μm - Max. roll width: 1050 mm Packaging dimensions: up to 600 mm length and 400 mm width Hopper capacity: 100 l Applications: - Food industry - Agriculture - Feed production - Chemical processing - Fertilizers and granulates - Pellets and solid fuels The price quoted is Net. Transport and installation at any location can be arranged for an additional fee. The machine is ready for operation. Immediate pickup available in Gdańsk.

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Tedjxxkuyjpfx Ac Nof Throughput capacity up to 5 t/h depending on material and grain size

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, pre-milling unit granulate glue station pneumatic pre-cut guillotine precision saws for trimming workpiece ends milling unit with profile cutters corner milling unit profile scraper unit Tjdpsxw T Tisfx Ac Njf straight scraper unit machine length 4500 mm Year of manufacture 2013 Total feed – 87026 linear meters

Condition: used, Opal Type: Opal 460 Opal 460 from ATM The Opal 460 is a fully hydraulic, water-cooled hot mounting press for mounting micrograph samples. The process sequence is carried out automatically. The fully automatic sliding shutter enables trouble-free opening and closing of the mounting area. and closing of the embedding area. Manufacturer ATM Q Ness GmbH Model OPAL 460 Functional principle: The Opal 460 is a fully hydraulic, water-cooled hot mounting press for mounting micrograph specimens. During hot mounting, the specimen is embedded in a mounting press under temperature and pressure with a plastic granulate. The advantages of the process are the high hardness of the embedding material (e.g. glass fiber reinforced) and the good freedom from splitting. Hot embedding agents are available based on epoxy resin, acrylic resin, phenolic resin and graphite resin. Main area of application: Mounting of samples for better sample preparation for further metallographic examinations. Technical data: Tjdpfsvd Dlgjx Ac Nef Press mold Ø 30 mm, Ø 50 mm Temperature range 20 ... 200 °C Max. Pressure 310 bar Weight ~ 40 kg Condition: used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Containers, granule containers, storage tanks, powder containers, paint powder containers, storage containers, silo systems, tanks, silos -Silo system: Granule container on a solid base, stackable -Capacity: approx. 600 liters -Container: Material: Aluminum -Inlet/Outlet: 450 x 450 mm / Ø 200 mm Tjdpfsxvxmljx Ac Nef Dimensions: see photos / technical drawing -Overall dimensions: 1190/1180/H1315 mm -Weight: 137 kg

Year of construction: 2022, condition: new, Model KPO-3 Booth Type Open Worksize dimensions 2800 width x 2200 height x 1000 depth Overall dimensions 2800 width x 2300 height x 1700 depth Weight 550kg Power supply Electric Nominal power 0,69kW x2 Voltage 380V Frequency 50-60Hz Filters Polyester Filters count 3 Tjdpfx Acobuyr Ts Nef Filters hang type Bagnet type, easy on/off Filter area 22,5m2 Filter cleaning system Pneumatic - Jet Venturi Ventilator type Aluminium ray rotor 2pcs. Loudness 74dBa Air consumption 10,200m3/h Warranty 12 months