Used Pot for sale (603)

Condition: used, Year of construction: 1960, Technical details: current capacity: 60 kVA throat: 680 mm arm distance: 115 / 415 mm pincer opening adjustable: 180 mm rated capacity: 60 kVA welding power: 71 kVA electrode capacity: 100 bis 600 daN voltage: 380 V / 50 Hz V air pressure: min./max.: 6 / 10 bar cooling water consumption: 12 l/min weight of the machine approx.: 685 + 200 kg connection voltage: 380 V / 91 A V rated capacity: 60 kVA Ncjdpeu Nv Emefx Adwol connected load: 54 kVA dimension L-W-H: ca. Maschine: 1.700 x 850 x 1.750 mm dimension L-W-H: ca. Aggregat: 900 x 650 x 1000 mm POINT WELDING MACHINE - WELDING TRANSFORMER Direct current three-phase welding machine Application: Spot, projection and series spot welding Maximum short-circuit power 89 kVA Primary short-circuit current 135 A Secondary current = short-circuit current: 25 kA and welding current max. 20 kA Electrode stroke max. 90 mm; electrode force min./max.: 100 daN / 600 daN Stroke sequence max. with 10 mm stroke 400 strokes/min. Spot fitting: electrode holder Ø 30 mm, adjustable 180 mm, arm distance = min./max.: 115 / 415 mm 2-fold foot switch Cooling unit, mobile = movable on wheels, connection power 1.45 kW, pipe connection R 3/4 inch, coolant R22 *

Condition: used, Technical details: current capacity: 100 kVA throat: 600 mm arm distance: 600 mm control: Bosch Programmier-Feldbusse pincer opening adjustable: 240 - 540 interface: RS 485 voltage: 500 V connection voltage: 380 V air pressure: 6 bar cooling water consumption: 14 l/min weight of the machine approx.: 770 kg space requirements of the machine approx.: 1,5 x 0,95 x 2,1 m SPOT WELDING MACHINE - WELDING TRANSFORMER Application: Spot, projection and series spot welding 1 - 1000 Hz Lifting cylinder electrode force 11 daN PSI 6000 medium frequency inverter with integrated control function (50/60 Hz AC mains voltage) Electrode arm Ø 35mm Electrode holder adjustment 200mm (manual) Nodpfx Adsu Nv Eaewocl Arm distance min. 240mm max.: 540mm Manual adjustment Operation via Rexroth IntraControl VCP05 control panel and foot switch incl. replacement electrodes (water-cooled) external Rittal water recooling unit SK3320.609 *

Condition: good (used), Hydraulic press TCS - 150T MACH-ID 8821 Manufacturer: TCS Type: 150T Control system: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load sliding table 20000 Kg Table load upper table 9000 kg Table out feed stroke 2100 mm Ncsdpfx Aeulwzmjdwsl Column diamater 180 mm Closing force 1500 Kn Opening force 700 Kn Laser safe CE Safety Power 15 kW Specifications Metric US Standard Distance between uprights 2000 mm Installation height 2000 mm Table length 1500 x 2000 mm ram stroke 1800 mm Starting speed 50 mm/min. Working speed 8 mm/min. Return speed 50 mm/min. Table rotation 0 - 270 rpm Table rotation 0 - 180 ° Dimensions (estimation) length 4800 mm width 5600 mm height 5200 mm Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Spotting ruler, dressing ruler, test ruler, straightening ruler, straightening bar Nodpfx Adofbyc Djwecl -Spotting ruler: 60° -Ruler length: 2015 mm -Dimensions: 2275/120/H105 mm -Weight: 90 kg

Condition: used, Area lighting, floodlight, workshop lamp, lamp, hall lamp, hall lighting, pendant lamp, industrial lamp -Power: 500 watts -Number: 6x lights available -Price: per piece -Dimensions: 245/170/ H620 mm Nsdpod N Ddvefx Adwjcl -Weight: 4.8 kg/piece

Condition: used, Power resistor, wire potentiometer, resistor, potentiometer, double potentiometer -Manufacturer: Siemens, potentiometer unused Ovp -Type: ASZ12.30 Nsdpsgh Ixlefx Adwscl -Number: 3x potentiometers available -Price: per piece -Dimensions: 40/35/H20 mm -Weight: 0,05 kg/piece

Condition: used, Power resistor, wire potentiometer, resistor, potentiometer, double potentiometer -Manufacturer: Siemens, double potentiometer Nedpjgh Iw Isfx Adwocl -Type: ASZ22.30 -Number: 12x potentiometers available -Price: per piece -Dimensions: 35/20/H40 mm -Weight: 0,05 kg/piece

Year of construction: 1969, condition: used, Motor potentiometer, regulator, motor controller, rotary potentiometer Ncsdpfen Tvbrex Adwol -Manufacturer: Kessler, motor potentiometer type P3-173 KL -Distortion Plan: PFN-64 -Rotary potentiometer: Rosenthal P 500 19 Ohm / Rosenthal P 100 470 Ohm -Individual components: see photos -Dimensions: 550/200/H270 mm -Weight: 9.1 kg

Condition: excellent (used), Power resistor, wire potentiometer, resistor, potentiometer, dual potentiometer -Manufacturer: Siemens, unused potentiometer in original packaging Nodpfx Adogh Ixhowocl -Type: ASZ12.803 Quantity: 1 piece available -Dimensions: 65/50/H30 mm -Weight: 0.05 kg

Condition: used, Spot welding device, spot welding machine, spot welding system, spot welding gun -Manufacturer: Dalex, spot welding machine type A11.1 -Voltage: 380 V. -Transport dimensions: 230/270/H205 mm Nodpfx Adefnqhpjwjcl -Weight: 20 kg

Year of construction: 1985, condition: used, Spot welder, spot welding machine, spot welding machine, spot welding tongs -Manufacturer: Tecna, spot welding machine: Type4161 -Rated power: 31 kVA -Operation: by foot pedal -Dimensions: 780/250/H1500 mm Njdpok Aubxefx Adwecl -Weight: about 130 kg

Year of construction: 1976, condition: used, Spot welder, spot welder, spot welder, spot welder -Stationary -Operation by hand switch Ncedoc N Uabopfx Adwsl -Arm length welding machine: 350 mm -Welding gun type: -Control -Dimensions machine: 1500/1000/H1670 mm -Weight machine: 774 kg -Dimensions control cabinet: 1550/420/H1960 mm -Weight control cabinet: 330 kg

Condition: used, Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Ncsdpfxjvuz N Rs Adwol Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch

Condition: good (used), I sell Dalex- Werke PMS11-3 spot welding machine, 172KVA, in bdb condition. Ncsdpou Sb Dtofx Adwel

Condition: used, Technical details: length: 1500 mm width: 1000 mm weight of the machine ca.: 0,2 t Nsdpfx Asvb Ab Iodwscl dimensions of the machine ca.: 1,5 x 1 x 0,8 m Surface plate / Welding bench with underframe *

Condition: used, Technical details: Ncjdpfxsvb Afme Adwel length: 600 mm width: 500 mm weight of the machine ca.: 0,05 t dimensions of the machine ca.: 1,5 x 1 x 0,8 m

Condition: good (used), Year of construction: 2005, Marking and surface plate 1000 x 1000 with base frame Ncodowqx Axjpfx Adwsl Location: from stock 54634 Bitburg - available immediately -

Condition: good (used), Features: Nedeupafvjpfx Adwocl • Accurate, Rapid, Easy to Use • No Cell Alignment or Calibration • Temperature Control, 5 - 75° C • Customizable Reports, SP Charts, Two-Parameter Plots, Graphical Overlays • Integrated Computer The Brookhaven ZetaPlus is designed for rapid, accurate and, above all, straightforward determination of zeta potential and electrophoretic mobility of fine particles from around 5nm up to about 50µm. Its principle is the measurement of the Doppler shifted frequency spectrum of scattered laser light using a known reference frequency for maximum accuracy. The key attraction of the ZetaPlus is its simplicity of operation due to the innovative design of its sample cell – electrode assembly. Using low cost, disposable cuvettes and simple "plug-in" electrodes, it completely eliminates the problem of electroosmosis – for all samples. With this system, cell alignment with respect to the laser beam is no longer critical and therefore requires no periodic checking or adjustment. Bubble-free filling of the cell is easy and fast and the volume of sample required is minimal. Sample temperature is accurately controlled by a fast response dual-Peltier system operating in the range 50C to 750C. For most common liquid media, necessary physical constants are all pre-programmed throughout the temperature range. pH can be read directly into the ZetaPlus software. Zeta potentials can be automatically plotted against pH or any other variable of the user’s choice, such as surfactant or additive concentration.

Condition: used, Year of construction: 2025, ROPA Keiler II Demo machine in use, year of manufacture 2025 Harvested area: 71 ha Current configuration: • K80 ball hitch below the PTO including immobilizer • Computer-assisted control of all functions (ISOBUS) • Hydraulic drawbar control • Hydraulic support leg • Tires: 850/50 R30.5 BKT • Dual-circuit air brakes • Telescopic axle – 3.00 m transport width on road, 3.50 m in the field • Fully hydraulic drive via PTO shaft (650 rpm) • Ridge intake with quick-change function, adjustable row spacing, spring-loaded haulm intake rollers • Sieving Web 1: pitch options 32, 36, 40, 45 or 50 mm / sieve channel width 1,600 mm • Sieving Web 2: pitch options 28, 32, 36 or 40 mm / sieve channel width 1,600 mm • Hydraulically driven shaker, infinitely variable speed adjustment • Hedgehog Belt 3: V-profile, 700 mm width; electric height adjustment for twin separating roller on Hedgehog 3 • Haulm Chain (pitch 250 mm) with 7 rows of haulm springs and 3 tear-off bars • Hedgehog Belt 4: H-profile, 1,300 mm width; 4-row circulating finger comb (UFK) • Hedgehog Belt 1: V-profile, 1,450 mm width and triple separating roller; electric height adjustment for triple separating roller on Hedgehog 1 Njdpfx Adjx R N Tbowecl • UFK: 4-row, each 2 rows variable speed independently adjustable; electric height adjustment for the UFK • Picking table: 1,100 mm wide • Waste conveyor: 350 mm wide, hydraulically driven, adjustable separately • Canvas floor bunker with parallel lift • Bunker capacity approx. 7.5 t, unloading height 4.2 m • Lighting, warning system and nonstop operation • Min. hydraulic flow rate: 110 l/min Includes Profi machine package: • 2 height-adjustable platforms • Central lubrication system • Collision protection for drawbar • Separating roller 2, fourfold version • Bunker bend hydraulically lowerable • Digital video system (video terminal, video switch, cable kit, 4 cameras) • Work lights • Speed-dependent belt control • Swath pickup with harvesting shaft, deck belt hydraulic, depth control wheels hydraulically adjustable • 12" Touch Terminal CCI 1200 Including onion harvesting unit (optionally available without) | Internal No.: 11308157

Condition: used, functionality: fully functional, Spot Welding Machine Fab. Dalex Type SF 8 Technical Data Manufacturer: Dalex Type: SF 8 Rated power at 50% duty cycle: 8 kVA Rated primary voltage: 380 V / 50 Hz Max. welding power: 23.7 kVA Max. short-circuit current: 8.8 kA Cooling water flow rate: 4 l/min Ncjdpox Ic T Aofx Adwsl Electrode force: 17 to 390 daN Open circuit voltage: 2 to 3.2 V Stages: 4 Throat depth: 235 mm Dimensions: L 750 x W 350 x H 1100 mm Weight: 77.5 kg All information without guarantee. A demonstration can be arranged at any time in our exhibition hall.

Condition: good (used), Good working condition. Please check out our other listings as well. Ncjdpfxsn Uv Uls Adwjl

Condition: new, functionality: fully functional, Electric Potters Disc Machine New. Nedpfx Aev U Emgodwecl 230 V With chair and shapers. Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2025, Technical Specifications of KHP60 G Automatic Spiral Fan Guard Welding Machine Operated: Pneumatic (Up and Down Piston) Pressure: Up to 8 bar Power: 60KVA Welding Capacity: 5mm + 5mm thick 4 wires same time Maximum Force: 610 daN Input Voltage: 380V/50Hz Protection Fuse: 200A Power Level: %1-100 power adjustable by digital microcontroller Weld Time: 1-100 Cycle (20ms - 2s) adjustable by digital microcontroller Arm Length: 800mm Cooling: Water cooling (15L/min) Power Input Cable: 3m Protection Class: IP21 Dimensions (W/L/H): 1100mm x2500mm x 1750mm Weight: 740Kg Ncedowvbxtepfx Adwel

Condition: good (used), Stage lights, spotlights, lamps, searchlights -Ultralite Quadro-500 Nsdpfx Asb A Nw Tjdwjcl -Technical data: -Power supply: 15/230 V 50/60 Hz -Lamp: GY9.5 500 W -Weight: 3 kg -Average operating distance: 4-10 m -Swivel range: 45°-45° -Beam angle: Min/Max 8°-37°

Condition: used, spotlight: Max. 1,000 W Stand height: 192 cm Nsdpfjqy Rq Isx Adwocl 2 ESYLUX HAST 1000 spotlights with stand and switching unit for lighting and heating workpieces and work spaces or other areas of application.