Used Powder Booth for sale (1,272)

Condition: used, Year of construction: 2020, operating hours: 288 h, functionality: fully functional, working width: 430 mm, area performance: 1,720 m²/h, overall weight: 115 kg, tank capacity: 25 l, total height: 1,025 mm, total width: 520 mm, total length: 1,135 mm, water tank capacity: 25 l, empty load weight: 40 kg, This used ride-on scrubber-dryer, model BD 43/25 C Bp Pack from Kärcher (year of manufacture: 2020 | operating hours: 288), has been technically refurbished and cosmetically restored in our in-house workshop. Among other things, new, maintenance-free gel batteries and new rubber squeegees have been installed. The disc brush has also been replaced. The suction bar has been sandblasted and powder-coated with a new finish. Knjdpfe Aa Nccjx Anuec The dirty water tank lid has been replaced with a new one. The BD 43/25 C Bp Pack is ideally suited for economical basic and maintenance cleaning of areas up to 900 m². Due to its maneuverability and ease of handling, it is also perfectly suitable for cleaning areas with obstacles. It is operated with a 24-volt battery, and a separate charger is included. The EASY-Operation system, with its characteristic yellow controls, ensures easy operation and very short learning times. Cleaning and maintenance work on the machine is equally easy to perform. Technical data: Working width, brushes: 430 mm Working width, suction: 750 mm Tank capacity, fresh/dirty water: 25/25 l Theoretical area performance: 1720 m²/h Practical area performance: 860 m²/h Permissible total weight: 115 kg

Condition: new, Viessmann Tecto RF WMC3 1450 Refrigeration Unit The Viessmann Tecto RF WMC3 1450 (also known under the series designation TectoRefrigo) is a state-of-the-art, plug-and-play, piggyback refrigeration unit for wall mounting in cold storage rooms for standard cooling applications. Technical Data • Manufacturer: Viessmann Refrigeration Solutions • Model Designation: Tecto RF WMC3 1450 (Size 2) • Equipment Type: Plug-and-play piggyback refrigeration unit (monoblock) for wall mounting • Integrated Bluetooth connectivity (for control via app and data tracking) • Automatic leakage detection • Pre-installed connection cables: 2.5 m for door contact switch and 5 m Modbus-RTU cable (for building automation system / BMS). • Application area: Standard cooling • Housing surface: Powder-coated, similar to RAL 9003 (signal white) • Cooling capacity at L0L32 (0 °C chamber / 32 °C ambient): 1450 watts • Cooling capacity at L0L43 (0 °C chamber / 43 °C ambient): 1270 watts • Control range for cold storage room: -5 °C to +10 °C • For cold storage room volume: Up to approx. 11.1 m³ to 15 m³ (depending on the selected insulation, goods, and set temperature) • Airflow (evaporator): 1000 m³/h • Permissible ambient temperature: +5 °C to +43 °C (indoor operation only) • Refrigerant: R290 (propane) – an environmentally friendly, natural refrigerant with a very low global warming potential (GWP 3) • Refrigerant charge: < 150 g • Global Warming Potential (GWP): 3 • CO₂ equivalent: < 0.45 t • Defrosting: Automatic hot gas defrosting with demand-controlled cycle control • Condensate: Automatic, integrated condensate evaporation • Maximum permissible wall thickness: 150 mm (for the mounting cutout) • Power connection: 230 V / 50 Hz (AC via CEE plug, blue, power consumption approx. 990 W) • Power consumption (nominal current): 5.4 A • Sound pressure level: 32.8 dB • Dimensions: 828 mm x 671 mm x 976 mm (H x W x D) • Weight: 64 kg (net) Kedps Aa Rlrefx Anusnc Dimensions for the wall cutout • Width of the cutout: 575 mm • Height of the cutout: 395 mm Key features • Piggyback design: The monoblock unit is simply hung into the corresponding cutout in the cold storage room wall (“piggyback”). The maximum wall thickness may be 150 mm. • Hot gas defrosting: The unit has an automatic, demand-controlled hot gas defrosting system with integrated condensate evaporation, so that a separate drain is usually not necessary. • Smart electronics: Equipped with modern control, Bluetooth connectivity (for app control and data tracking), and automatic leakage detection. • Components: Thermostatic expansion valve, pressure sensors, and efficient, internally finned heat exchangers. Important application notes • Ambient temperature: The device is designed exclusively for operation in closed rooms with an ambient temperature of +5 °C to +43 °C. It does not have a winter control system and is not weatherproof (no outdoor installation). • Accessories for Viessmann cells: If the WMC3 unit is mounted on a classic Viessmann cold storage room, a special adapter cable and a converter box are usually required to connect the door contact switch and the power supply correctly. “Everything from one source: We would be happy to offer you suitable bank financing for your project.” More articles – new and used – can be found in our shop! International shipping costs on request!

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm, Spraying machine for profiles / Automatic spraying machine for moldings Manufacturer: Falcioni Type: Flexispray Year of manufacture: 2005 Linear continuous spraying machine for the automatic coating of profile moldings, frame moldings, profile boards, and baseboards, with a spray booth, belt conveyor, and programmable gun control. Typical applications: Molding production, frame and picture frame manufacturing, profile wood and panel production, contract coating. Intended coating materials according to the manufacturer: - UV stains and water-based stains - Water-based paints applied by spraying Knjdpfxo Aa Ad To Anusc - UV paints Workpiece dimensions: Max. working width 205 mm Max. workpiece height 60 mm Minimum workpiece length 400 – 800 mm Feed: Feed speed 20 – 120 m/min Conveyor drive 0.75 kW, inverter-controlled Extraction: Exhaust fan 0.55 kW Exhaust capacity 5000 m³/h Compressed air: Operating pressure for gun control 4 – 5 bar Compressed air consumption 1200 Nl/min Electrical system: Installed total power 1.6 kW Machine weight approx. 600 kg Equipment: - 3 spray guns - without material pump Basic concept: - Spray booth with large-area glazing - Rubber-coated conveyor belts at the infeed and outfeed, roller conveyor in the spraying zone - Gun activation via workpiece detection with a pressure roller and microswitch - Electronic control system VT 50 for programming gun height and on/off points for each gun, display of belt speed, meters produced, and quantity - Overspray recovery via collection trays and collection tanks - Dry filter system for exhaust air purification - Operation by one person Note: The technical specifications have been taken from the manufacturer's operating manual and may differ from the actual design of the machine.

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! Kedpowfhu Hjfx Anuenc ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Condition: good (used), Year of construction: 2018, functionality: fully functional, Gema Year of manufacture: 2018 Equipped with 6 automatic guns, 2 manual spray guns Max. pass-through dimensions: L x H x W, 3m x 2m x 1.1m Magic Compact BA04 Color change system Magic Compact BA4 OptiCenter OC2 Powder coating device OptiMatic AS06-8P Lifting equipment ZA7-23 Mono-cyclone 24,000 [Nm3/h] from Therma Afterfilter exhaust air volume 24,000 [Nm3/h] STS fire suppression system Caldan Overhead conveyor system Power & Free by Caldan Year of manufacture: 2018 Approx. 120 linear meters, with 12 product carrier trolleys, each 3 meters Custom built by Protaurus Gas-heated curing oven by Protaurus Year of manufacture: 2018 Weishaupt burner type WG40N/1-A, 500 kW output Complete with control system and accessories Without insulation material, oven casing needs to be overhauled Complete system by Gema and Caldan professionally packed Knjdpfsy Al T Isx Anuec Professional reassembly by Gema and Caldan prepared Layout attached Transportation costs, reassembly, and commissioning to be borne by the buyer

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Powder extraction hood The Interflow powder extraction hood protects the user from solid contaminants that may be released during various operations. Due to its robustness and reliability, the unit requires a minimum amount of maintenance. Furthermore, the unit has a sturdy appearance and optimal ease of operation. Specifically, for example, during weighing operations, you can continuously adjust the air velocity from the touchscreen control panel, ensuring that the airflow does not affect the weighing process. Kjdpjzhvyajfx Anujnc The operation of the powder extraction hood is based on the principle that air is extracted from the work area through a pre-filter installed in the back panel. This creates a horizontal airflow from the user towards the back panel. All airborne particles are carried along in the airflow and cannot therefore be released uncontrollably into the environment. The airflow is filtered through an easily replaceable pre-filter and an absolute filter and then returned to the surrounding area. Specifications: Made of high-quality HPL material Smooth finish both inside and out Custom solutions possible Installation and validation on-site Complies with all laws and regulations Fail-safe design Hermetic sealing Dimensions: 1838 × 610 × 600 mm, ESD tested, filter tested

Year of construction: 2021, condition: excellent (used), functionality: fully functional, In the Powder applicator it consists of a hopper and a vibrator feeder, that spreads out the granulate in an 130 cm and even coating over the printed transfer paper on the under laying conveyer 140 cm wide net belt, 150 cm long. The machine is height adjustable 88-100 cm and has the total length 150 cm. Knjdpsx R N Ursfx Anuoc The powder feeder as well as the conveyor are both individually adjustable for optimal processing. Excess powder is effectively removed by a combination of airstreams, scatter mechanism and brushing. The silent automatic self-cleaning filter system recycle the granulate back to the hopper for re-processing and exhausts filtered air. In order to minimise the influence of static electricity there is two antistatic bars across the conveyor.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: K974.016, Plasma spraying system - Comfort control panel - Gas regulation cabinet for plasma - Power source PPC 2002 NG - JamBox - Powder feeder PF 2/2 - Plasma torch - Plasma hose and cable set for 9MB - Sigma 67-2K water recooler with 2 cooling circuits for separate use of a 9MB and TopGun torch Kjdpfxoym Ay Es Anujnc - Control cabinet - TS modem adapter

Condition: good (used), Year of construction: 1998, Heidelberg Autoplate (Automatic Plate Changing System) +Version Alcolor Dampening CP Tronic Control System Automatic Ink Roller Washing Device Blanket Washing Device Impression Cylinder Washing Device Grafix Alphatronic 200: Powder Sprayer Condition: Cleaned Knodpfxsw U A Npe Anuec

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 43,000 mm, total height: 3,800 mm, total width: 20,000 mm, type of input current: three-phase, workpiece weight (max.): 200 kg, compressed air connection: 9 bar, workpiece height (max.): 2,400 mm, workpiece length (max.): 7,200 mm, We are offering this BEWAP MACRO 6 POWDER COATING MACHINE – Complete Powder Coating Line 7.2 m, year of manufacture 2015, in very good condition. Complete setup for surface treatment, including 2 powder coating booths and 2 curing ovens for powder coating applications. Machine in perfect working order. Year 2015. Surface Treatment Booth (made of 316 L stainless steel, membrane spray pumps, dosing pumps, stainless steel pickling tanks with immersion heaters, rinse tanks, effluent tank, dosing pumps, reverse osmosis unit, water softener) Drying oven (gas burner, control cabinet) 2 manual powder coating booths with automatic feed and extraction Curing oven (gas burner, control cabinet) Structure with manual overhead conveyor: 3 transfer trolleys with 3 lifting beams (200 kg per beam) 2 lift stations for loading and unloading parts 36 lifting beams in total Operation with 3 beams simultaneously Compatible with Qualicoat and Qualilaquage certification Maximum part dimensions per lifting beam: Maximum part length: 7200 mm Knjdpfxjyc S Hte Anusc Maximum part height: 2400 mm Maximum part width: 500 mm (configuration for 1000 mm width possible) The line is to be dismantled and removed on site Price: €150,000 (excl. VAT) If you have any questions or need further information, please do not hesitate to send us a message or call us. Viewing is possible.

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 2000x1000 mm- Motor rating 2.2 kW, 4.6 A, 3 Ph, 400V/50 Hz, 1430 rpm- Flow rate 6800 m³/h- Usable negative pressure 500 Pa- Filter surface 2.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 3400 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 2-stage switch, +5 m connection cable with power safety plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1912x1405x946 (2969x1405x1218)- Weight device approx. 248 kgItem No. 195 752 01 Kjdpov Svc Hjfx Anusnc

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Knedpfxoun R Ufj Anujc Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Year of construction: 2026, condition: new, functionality: fully functional, A cement clinker grinding mill is a specialized equipment used to grind the hard nodular clinker into fine powder, which is cement. Most cement is currently ground in ball mills and also vertical roller mills, which are more effective than ball mills. Here are key features and information about cement clinker grinding mills: 1. Raw Materials: - The main raw material for making cement is clinker, which is produced by sintering limestone and clay. Other materials such as gypsum, fly ash, or slag may also be added during the grinding process to achieve specific properties. 2. Grinding Process: - The clinker and other additives are finely ground in the grinding mill to produce cement. The grinding process is a crucial step in cement production and contributes significantly to the final quality of the product. 3. Types of Mills: - Ball Mills: Traditional ball mills are commonly used for grinding clinker. They operate by rotating a cylinder with steel grinding balls, causing the balls to fall back into the cylinder and onto the material to be ground. - Vertical Roller Mills (VRM): VRM technology has become increasingly popular for clinker grinding. These mills use a rotating table with rollers to crush and grind the clinker, providing energy efficiency and a smaller footprint compared to ball mills. 4. Gypsum Addition: - Gypsum is often added during the grinding process to control the setting time of the cement. It prevents flash setting of the clinker and facilitates the formation of a workable and pumpable cement paste. 5. Quality Control: - Quality control measures, such as monitoring the fineness of the cement, chemical composition, and other properties, are implemented during the grinding process to ensure the final product meets the required specifications and standards. 6. Clinker Cooling: - Before grinding, the clinker is produced by heating the raw materials in a kiln. The clinker is then cooled before entering the grinding mill to prevent excessive heat build-up during grinding. 7. Dust Collection and Environmental Considerations: - Dust collectors and air pollution control systems are often employed to capture and control the dust generated during the grinding process, addressing environmental and safety concerns. 8. Packaging and Storage: Kjdpfeq Nfbhsx Anusnc - After grinding, the cement is typically stored in silos before being packaged in bags or dispatched in bulk for distribution to construction sites or for sale in the market. Cement clinker grinding mills play a crucial role in the cement production process, and advancements in technology continue to improve the efficiency and environmental sustainability of the grinding process. Technical details We have different options for different requirements, please contact our team for more info.

Year of construction: 2019, condition: new, Powder coating system Mini – for beginners Kedpfxjctx Iro Anusnc The Spark / ROMER® powder coating system Mini consists of: Powder oven SLS-9 small (Internal dimensions: 1200x1400x1200mm - without transport system) Powder booth KPZ-2 Delivery time: approximately 12 to 16 weeks after the order Shipping costs will be calculated individually. (Self-collection is also possible) To provide you with a detailed offer for a system tailored to your specific application, we require further details regarding the application and batch size. We will then promptly prepare an offer for a suitable system with the dimensions you require. Payment terms: 30% down payment and the remaining 70% upon notification of shipping readiness.

Condition: used, Year of construction: 2014, Eichholz Silo Aluminium-Schuttgut-Container OWS (2014) Premium aluminium container for bulk materials (plastic granules, powders, pelleted raw materials) manufactured by the German brand Eichholz Silo- und Anlagenbau. Ksdpfsz Hwxfex Anuonc 1. Manufacturer: Eichholz Silo- und Anlagenbau GmbH & Co. KG (Germany) 2. Type / Model: Aluminium-Schüttgut-Container OWS 3. Year of Construction: 2014 4. Serial Number: 1409073.01 5. Material: Aluminium 6. Certification: CE 7. Features: Bottom outlet tube with clamp connection for vacuum/pneumatic conveying systems, heavy-duty frame designed for forklift transport and stacking.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, CP 2000: Touch Screen Console Automatic Blanket Washing Device Impression Cylinder Washing Device Grafix Alphatronic 200: Powder Sprayer Heidelberg Autoplate (Automatic Plate Changing System) Knodpjz Er Ncefx Anusc Alcolor Dampening Technotrans Cooling Device Low-Pile-Delivery Impression Account: 138 Mio.

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), functionality: fully functional, Mag Impact 2400 VSI (Vertical Shaft Impact) crusher Year of manufacture: 2008 Knedpfx Ajz H Rd Ujnusc Only 3,200 operating hours 250 kW electric motor Maximum feed material size: 130 mm Rotor tip speed: 50 m/s Output product: 0–16 mm (with max. 8/12 mm) Capacity: 250–300 t/h (depending on material and target fraction) Includes support frame and complete electrical system BELT CONVEYORS NOT INCLUDED Includes two additional anvil rings, one of which is designed for double reinforced anvils Total assembly weight: 24,000 kg Crusher is 100% functional and ready for operation This VSI crusher offers the highest material reduction ratio for a 0–80 mm feed; the 0–4 mm fraction yield when processing limestone is nearly 50%! An ideal machine for producing fine aggregates (dust/powder) Full technical documentation and a certificate of origin are provided with the machine We also offer the widest range of spare parts in Poland for this type of machine (available in our other listings) as well as comprehensive post-warranty service!

Year of construction: 2018, condition: ready for operation (used), table load: 35 kg, number of axes: 3, This 3-axis CABYCAL LPP was manufactured in 2018. It features a maximum reciprocator axis stroke of 2,200 mm and a production capacity of up to 90 racks per hour. The system includes a Nordson powder coating application with 4 automatic guns and a comprehensive pre-treatment tunnel. If you are looking to get high-quality powder coating capabilities, consider the CABYCAL LPP automated powder coating line we have for sale. Contact us for further details. • Conveyor • Type: Overhead monorail conveyor (frequency inverter driven) • Speed range: 0.75 to 1.2 m/min (design speed 0.75 m/min) • Reciprocator (application axis) • Max vertical stroke: 2,200 mm (adjustable) • Vertical speed: 0.14 to 0.6 m/s (adjustable) • Positioning movement: Manual adjustment Knsdpfxjz A T Rps Anuec • Part capacity • Workpiece material: Metal • Max part dimensions (L x W x H): 1,000 x 100 x 2,000 mm • Gauge clearance (W x H): 300 x 2,200 mm • Max load: 35 kg per 800 mm hanger rack • Production capacity: 56 racks/hour at 0.75 m/min; 90 racks/hour at 1.2 m/min • Powder application system • Brand/Model: Nordson Encore LT • Reciprocators: 2x electronic reciprocators • Automatic guns: 4x automatic powder guns with individual control modules • Powder booth and recovery: Booth with recovery cyclone and absolute filter with automatic pulse-jet cleaning • Air velocity at openings: approx. 0.5 m/s • Line components and thermal equipment • Pre-treatment tunnel: 5-stage cleaning tunnel with chemical baths, vapor extraction fan, advance solenoid valves • Drying oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 2x air curtain fans • Curing (polymerization) oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 1x air curtain fan, 1x top extraction fan • Oven burners: BALTUR (Code 17080010 / BTG 15 5060HZ) • Max operating temperature: 180°C • Utilities and technical requirements • Electrical connection: 400 VAC, 3-phase + neutral + ground, 50 Hz • Total electrical power: 90 kW (approx. 80 kW line requirement) • Electrical consumption: ~80% (excluding application booth) • Heating fuel: Natural gas • Thermal power: 520 kW total (650 kW installed capacity / ~420 kW consumption with heat recovery) • Compressed air: Clean, dry air at 6–8 bar (2x 1/2" connections + 1x 1" connection for application) • Reverse osmosis water: 1-point distribution (TTS) at 2–3 bar; ~600 l/h via 2" inlet • Building requirements: 4–5 roof penetrations for extraction chimneys; wastewater sump/trench recommended for pre-treatment drainage Additional equipment • 1x Manual powder gun with integrated rack control unit • 1x Complete sieving unit with 10 m feed hose • 1x 36 kg powder hopper • 1x Recovery venturi pump

Year of construction: 2026, condition: new, SMW 600 — Plastic Pulverizer with Vibratory Sieve Industrial Rotor Knife Pulverizer for Fine Grinding of Plastic Materials The SMW 600 Plastic Pulverizer is designed for fine grinding of thermoplastic materials, including PVC, PE and PP. The machine features a high-speed rotor with rotating and stationary knives made of high-quality hardened steel. Grinding is achieved through impact, friction and centrifugal force. Fine particles are discharged by airflow, while oversized particles remain in the grinding chamber for further processing. The combined air and water cooling system reduces operating temperatures and prevents material overheating. The complete system includes a feeding hopper, belt conveyor, pneumatic conveying system, dust collector and vibratory sieve for powder classification. 1. General Technical Specifications * Model: SMW 600 * Type: Rotor Knife Plastic Pulverizer * Materials: PVC, PE, PP * Capacity: 100–300 kg/h * Output Particle Size: 30–80 mesh * Maximum Feed Size: 15 mm * Rotor Diameter: 590 ±1 mm * Rotating Knives: 26 pcs * Stationary Knives: 14 pcs * Main Motor: 55 kW * Motor Speed: 2950 rpm * Pneumatic Conveying Fan: 5.5 kW * Rotary Valve Motor: 0.75 kW * Vibratory Sieve Motor: 0.75 kW * Cooling: Air and water * Dimensions (L × W × H): 3800 × 2900 × 2150 mm * Weight: 2400 kg Capacity depends on the processed material, required particle size and operating conditions. 2. Grinding System The high-speed rotor operates with 26 rotating knives and 14 stationary toothed knives. Material is ground through impact and friction. Oversized particles remain inside the grinding chamber until the required particle size is achieved. The grinding chamber features an opening cover for easy inspection, cleaning and knife maintenance. 3. Automatic Feeding System The feeding hopper and belt conveyor provide continuous material feeding into the pulverizer. * Feeding Method: Automatic belt conveyor * Maximum Feed Size: 15 mm 4. Cooling System The combined air and water cooling system maintains stable operating temperatures during grinding. * Cooling: Air and water * Water Inlet Temperature: Max. 25°C * Water Outlet Temperature: Max. 50°C 5. Pneumatic Conveying & Dust Collection The ground material is transported by airflow to the collection system. The system includes a pneumatic conveying fan, rotary valve, material collector and fabric dust filter. * Fan Power: 5.5 kW * Rotary Valve Motor: 0.75 kW * Dust Collection: Fabric filter Knedpfez Rphnsx Anuec 6. Vibratory Sieve The vibratory sieve separates the ground plastic powder according to particle size. * Type: Circular Vibratory Sieve * Diameter: 1000 mm * Motor Power: 0.75 kW * Application: Plastic powder classification Applications: Fine grinding of PVC, PE, PP and pre-crushed plastic waste for recycling and reuse in plastic manufacturing.

Condition: used, A-frames, 80 units available. Dimensions of the frames: Length: approximately 200 – 240 cm Overall width: approximately 80 cm Height: 180 – 220 cm Some are galvanized, the rest are powder-coated. All of them can be loaded onto 3-4 trucks. Knjdoz Ru Sljpfx Anuec Price upon request.

Year of construction: 2026, condition: new, Galvanized. 1. Rotary screen, 1600 mm, length 4880 mm, 4 mm woven wire (optional - 5.0 mm sheet metal at an extra charge), perforation 20 x 20 mm (or other upon request), drive 4 kW, drum speed approx. 14 rpm, 2. Receiving conveyor (under the drum). Length 3700 mm, width 800 mm, 3. Undersize material elevating conveyor. 4000 mm long, 650 mm wide, up to 2500 mm high, drive 3 kW, 4. Oversize material elevating conveyor. Length 4000 mm, width 650 mm, Knsdpfx Asd Rzy Nonujc height 2500 mm, drive 3 kW, 5. Hopper with a length of 3000 mm, a width of 1800 mm with adjustable belt speed via a variator. Drive 3 kW, 6. Semi-mobile. Mounted on a chassis with wheels and a lower trailer hitch, 7. Cleaning brush with a diameter of 300 mm, length 4000 mm, 8. Drum drive via a gearmotor + 2 rubber drive wheels with a diameter of 230 mm, 9. Hour meter, 10. CE certificate, 12 months warranty, manufactured in EU (Poland), 11. Equipped with an electrical control panel, switch 0/1, safety stop switch, motor overload switch, 12. Weight: approx. 3.5 tons, 13. Tramec durable gearmotor (with speed control in the hopper), 14. FAG and SKF rolling bearings, 15. Structures made of closed steel profiles - steel grade S355, 16. Conveyor rollers made of high-quality materials. Only SKF ZZ bearings, 17. Drum construction is protected against corrosion - hot-dip galvanized (!), 18. Drum structure - S355 steel. Wall thickness 3 mm, perforation to be agreed upon (optional), 19. Brush with adjustable spring. The brush pressure can be adjusted, 20. Electrical sockets and emergency stop switches, on both sides of the machine, 21. Drum covers. Powder-coated in the painting booth. The final technical specifications (length, width, perforation, additional components, etc.) are always agreed upon individually with the customer according to their needs. Sand. Black soil. Coal. Mixed waste. We prepare the machine according to your requirements. We produce rotary screen machines: 1) Stationary, semi-mobile, mobile, 2) Diameter, drum length - on request, 3) Electric, diesel-electric. We have many references in the European Union. We speak Polish, German, English and Russian.

Year of construction: 2026, condition: new, Galvanized on request. 1. drum screen, 1600 mm, length 2800 mm, 4 mm braided wire, Perforation 20x20mm (others on request), drum speed approx. 13.5 rpm, 4kW, 2. Undersize and cross conveyor belt - length / width to discuss, 3. Hopper with a length of 3300mm, a width of 1500mm with adjustable belt speed through the variator, 4. Mounted on a certified frame for a hook crane, 5. cleaning brush with a diameter of 300 mm, length 2000mm, 6. Drum drive via a gear motor + 2 rubber drive wheels with a diameter of 230 mm, 7. Supports with adjustable height, 9. Total height with brush approx. 2484mm, outer width approx. 2400mm, total length 7500mm, 10. Equipped with an electrical control panel, switch 0/1, safety stop switch 2 x , engine overload switch, 11. Total power supply 9.2KW, 12. CE certificate, 12 months warranty, made in EU (Poland), 13. Capacity about 50t/h (black earth), 14. Weight: about 3 tons. Kjdpfx Aneixt Rhsuenc 15. Tramec durable gear motor (with speed control in the Bunker), 16. FAG and SKF rolling bearings, 17. Structures made of closed steel profiles - steel class S355, 18. Conveyor rollers made of high quality materials. SKF ZZ bearings only, 19. Drum construction protected against corrosion - hot zinc as an option, 20. Drum Structure - S355 steel. Wall thickness 3mm, perforation for agree (option), 21. Adjustable spring brush. The brush pressure force can be adjusted, 22. Electrical sockets and emergency stop switches, on either side of the Machine, 23. Drum Covers. Powder coated in the paint booth. We produce drum screening machines: 1) Stationary, semi-mobile, mobile, 2) diameter, drum length - on request, 3) Electric, Diesel Electric. We have many references in the European Union. We speak Polish, German, English and Russian.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, operating hours: 12 h, power: 30 kW (40.79 HP), input voltage: 380 V, temperature: 200 °C, inner dimension length: 1,200 mm, inner dimension width: 1,700 mm, inner dimension height: 2,300 mm, total length: 1,500 mm, total width: 2,200 mm, total height: 2,800 mm, overall weight: 400 kg, number of chambers: 1, control type: PLC-controlled, Equipment: CE marking, Professional Composite Curing Oven – Romer SL Internal Dimensions: 1200 × 1700 × 2300 mm High-performance industrial composite curing oven from the respected Polish manufacturer Romer, designed for advanced composite manufacturing processes including carbon fiber prepreg curing, drying, post-curing, and thermal processing applications. This electric batch oven is ideal for aerospace, automotive, marine, motorsport, and industrial composite production environments where accurate and stable temperature control is essential. Knedpjy Tvvzefx Anuec Constructed with a heavy-duty steel frame, stainless steel internal chamber panels, and durable powder-coated external finish, the oven is built for continuous industrial operation and long-term reliability. The smart control system delivers precise temperature management, efficient power consumption, and controlled heating/cooling performance. The integrated air circulation and ventilation system ensures uniform heat distribution throughout the chamber for consistent curing quality. Key Features: • Maximum operating temperature: 200°C • Internal dimensions: 1300 × 1800 × 2000 mm • Designed for composite prepreg curing applications • Heavy-duty industrial construction • Stainless steel internal chamber • High-efficiency hot air circulation system • Accurate programmable temperature control • Multi-stage curing program capability • Controlled heating and cooling cycles • Uniform temperature distribution • 8 internal vacuum inlets installed inside the chamber • Vacuum pump included in the sale • Suitable for carbon fiber, fiberglass, prepreg, tooling, and composite components Applications: • Carbon fiber prepreg curing • Composite part manufacturing • Aerospace and motorsport components • Marine composite production • Tooling and mold post-curing • Drying and thermal treatment processes • Research & development and prototype manufacturing The oven is in very good working condition and can be inspected and tested on-site.

Year of construction: 1999, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine APC K 200-50 pharmapactor with Flake Crusher AFC 300. The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Specially built for pharma industry. Knsdpfxji E Himj Anujc Material of construction: - product contacting parts: stainless steel - none product contacting parts: stainless steel Non Pressure Shock Resistant (NPSR), non ATEX Scope: Hosokawa Alpine Pharmapaktor APC K200/50 with 4,0 kW motor, feeding screw with 1,1 kW motor + Flake Crusher AFC 300 with 0,75 kW motor

Year of construction: 2011, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Knsdpfxehx N Rvs Anujc Used Hosokawa Alpine Mikro Classifier CC22, from our former generation previous to our current technological evolution. This air classifier can operate off-line as a stand alone system or in-line as the perfect companion for a Hosokawa Alpine ACM 10 or ACM 15 impact classifier mill, to ensure no undesired fine dust particles are present in the final micronized product, usually in the range below 5 - 10 µm. Some applications for this classifier are powder coatings where the final particle size distribution (PSD) is very important and both undesired ultra-fine dust and oversized material must be avoided. Other products that can be processed with this classifier are acrylate, epoxy polyester, gypsum, plastics, petroleum coke, polyurethane, spinel ,etc. Easy to clean and maintain. This classifier is fitted with a secondary air in the coarse discharge bottom part to ensure agglomerates dispersion and that no fine dust remains mixed with the coarser particles. Material of construction: stainless steel Scope: Hosokawa Alpine MikroClassifier CC22 from our previous generation with motor