Used Powder Press for sale (27,518)

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t Iaodpfx Adex Uru Njwsl dimensions of the machine ca. 2,8 x 3 x 4,5 m

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam Iaedsw Nafkjpfx Adwsl - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 1991, Press Brake Manufacturer: AMADA PROMECAM Model: HFB 125/40 Year of manufacture: 1991 Control: DELEM DA 58 Iajdpfx Adjx Tzl Iewjl Max. pressing force: 1,250 kg Max. stroke: 180 mm Sheet thickness: 8 mm Working width / throat: 3.7 m Number of phases: 3 Power consumption: 11 kW Voltage/Frequency: 380/50 Rated current: 24 Weight: 9,900 kg Availability: immediately

Condition: new, The AHK M 1230 NC is a highly efficient press brake from KNUTH, designed specifically for sheet metal processing within the press brakes category. This machine offers a modern, cost-effective NC alternative to traditional CNC press brakes, making it ideal for operators accustomed to manual programming. Featuring a high-precision, stress-relieved steel frame and hydraulic cylinders, the AHK M 1230 NC excels in handling complex bending sequences effortlessly. Enhanced safety features, including light curtains and a CE-compliant design, ensure operator protection while maintaining productivity. The NC control system, complete with a user-friendly touchscreen, allows for easy input of bending sequences, accommodating up to 500 programmable data sets. You can confidently handle a variety of materials and shapes thanks to Promecam tool mounts and an adjustable back gauge with motorized X and R axes. With features designed for ease of use and reliability, now is the perfect time to request a quote for the AHK M 1230 NC press brake, ensuring your workshop benefits from superior capabilities in sheet metal processing. Isdpfxeqc S Nae Adwjal

Condition: new, functionality: fully functional, Year of construction: 2025, Cement Mill & Ultrafine Grinding Mill 🏗️ Introduction to Cement Mill & Ultrafine Grinding Mill In the world of construction and materials processing, achieving the right particle size is essential. Introducing the Cement Mill and Ultrafine Grinding Mill—two pivotal machines designed to deliver superior grinding performance for cement production and ultrafine materials. Let’s dive into their features and applications! 💼 🔥 What is a Cement Mill? A Cement Mill is a crucial piece of equipment in cement production. It grinds clinker, gypsum, and other additives to produce fine cement powder. This machine ensures the optimal particle size for high-quality cement, essential for building robust structures. 🚀 🔧 What is an Ultrafine Grinding Mill? An Ultrafine Grinding Mill is designed to produce extremely fine powders from various raw materials, such as minerals, chemicals, and industrial waste. It operates at high efficiency, delivering ultra-fine materials for advanced applications like coatings, plastics, and ceramics. 🌟 💼 Key Benefits of Using Cement Mill & Ultrafine Grinding Mill 1. High Efficiency: Both mills are engineered for maximum efficiency, ensuring rapid processing times and reduced energy consumption. 🌿💡 Ijdpfjq Nyydex Adwoal 2. Superior Grinding Performance: Achieve consistent, high-quality output with precise control over particle size. 🏭 3. Versatility: Suitable for a wide range of materials, making them essential for various industrial applications. 🌳 4. Durability and Reliability: Built with robust materials, these mills offer long-lasting performance in demanding industrial environments. 💪 📈 Applications in Industry Cement Mill Applications: 1. Cement Production: Essential for producing high-quality cement for construction projects. 2. Infrastructure Development: Used in creating concrete for roads, bridges, and buildings. Ultrafine Grinding Mill Applications: 1. Mineral Processing: Producing ultra-fine powders for advanced material applications. 2. Chemical Manufacturing: Used in creating fine chemicals for various industrial processes. 3. Environmental Applications: Grinding industrial waste for recycling and reuse. ♻️ 🌟 Conclusion Whether you’re in construction, materials processing, or advanced manufacturing, the Cement Mill and Ultrafine Grinding Mill are indispensable tools. Their efficiency, versatility, and superior performance make them a valuable addition to any production line. Contact us today to learn more about these innovative machines and how they can revolutionize your operations! 📞

Condition: used, Year of construction: 2024, Exhibition machine Garbsen, new, complete in standard configuration with: - Sturdy, torsion-free steel frame, welded and bolted construction - Upper lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams featuring proven tolerance compensation system (System Ganner) for tightly pressed carcass joints - Counterpressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support panels - Continuous pressing surface height of 95 mm on the lower vertical press beam - Electromotive adjustment of both press beams via precision trapezoidal spindle screws (with increased pitch and concentricity accuracy) and high-performance recirculating nuts with grease reservoir - Pressing is carried out electromotively, by 2 separate helical geared motors (2 x 0.75 kW) - The pressing force of the press beams is infinitely electronically adjustable using two potentiometers and regulated via frequency converters; the pressing force control is therefore absolutely wear-free - Pressing force for the horizontal press beam: min. 500 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing force for the vertical press beam: min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second - Extremely simple operation via 6 separate push buttons, 8 movement processes can be selected via the control system - Freely adjustable pressing time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: length min: 150 mm, max: 2500 mm; height min: 150 mm, max: 1400 mm; depth: 700 mm - Electrical connection: 400V, 3Ph, 50Hz (3.2 kW, 16 A) - Weight: 2100 kg (net) - Dimensions: 3500x1200x2300 mm (L x W x H) Image includes special accessories: machine feet. Surcharge for rapid traverse speed per unit for fast positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speed: 5 / 10 / 25 mm/sec and rapid traverse speed: 50 mm/sec. Sensors can be deactivated for pressing special components. Iaedpfx Aox Twc Asdwjl Set of machine feet for working height 500 mm per unit. Location: Garbsen

Condition: excellent (used), Catalogue number 6763 TECHNICAL DATA - 5 piston cylinders - 3 upper - 2 side - max length of glued elements: 3100mm - max height of glued elements: 2100mm - motor power: approx. 2kW - upper cylinders: hydraulic - side cylinders: hydraulic - dimensions (L/W/H): 3750/1000/2700mm - weight: approx. 800kg ADVANTAGES – very good condition – used press Iaodpfx Asx R Dvqsdwsl – not repainted – designed for professional use Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may be adjusted)

Condition: good (used), Year of construction: 2003, functionality: fully functional, Baler Presto CC 13 V, Year of manufacture: 2003 Technical data: Manufacturer: Presto Model: CC 13 V Year of manufacture: 2003 Pressing force: 13 t Cycle time: 24 s Drive power: 4 kW Feed opening: 780 x 750 mm Feed volume: 0.39 m³ Tying: 3-fold, automatic Throughput capacity for bulk density of: 35 kg/m³ - 1.7 t 60 kg/m³ - 2.5 t 100 kg/m³ - 3.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 250 kg Dimensions: 2800 x 1050 x 1830 mm (LxWxH) Machine weight: approx. 1900 kg Materials: paper, cardboard, film Iaodpfox Uz Dtex Adwjl Note: The baler is in good condition and has been function-tested. You can find a video on our website or YouTube channel. Inspections, including under power, can be arranged at any time by appointment. Upon request, we can also perform tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on the manufacturer’s information. We accept no liability for the provided information or potential errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are available by appointment. Sale is ex works, prepayment only, without warranty or guarantee.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: CNC control, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: PS 1200, bending force (max.): 2,000 t, working width: 15,400 mm, number of axes: 4, type of crowning: CNC-controlled, back gauge adjustment: CNC-controlled, overall weight: 4,17,000 kg, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, european tool clamping system, foot remote control, safety light barrier, upper tooling, Beyeler hydraulic press brake type Mammut PR 10 2000x15400 Working width: 15,400 mm Max. pressing force: 2,000 tons Cybele CNC control type PS 1200 CNC-controlled Y1, Y2, and R axes 4 back gauge fingers with adjustable height CNC-controlled hydraulic crowning Iajdpfeyahu Iox Adwel Hydraulic upper tool clamping Includes tools Total weight: 417,000 kg

Condition: ready for operation (used), Year of construction: 2003, This F&O 03035 laminating press was manufactured in 2003. It features a working width of 1300 mm and a melting unit capacity of 200 kg. The outfeed roller conveyor is approximately 9000 mm long. In 2024, the infeed conveyor was upgraded with 4 brushes and radiant heaters. Consider the opportunity to buy this F&O 03035 laminating press. Contact us for more information. Iasdex Tkazopfx Adwjl Application Types Pressing / Laminating

Condition: new, functionality: fully functional, Year of construction: 2025, Microsilica, also known as silica fume or condensed silica fume, is a byproduct of producing silicon metal or ferrosilicon alloys. Microsilica powder grinding mills are used to process microsilica powder for various applications, including the production of high-performance concrete, refractory materials, and other specialty products. Grinding mills play a crucial role in reducing microsilica particles to the desired fineness. Here are some key aspects related to microsilica powder grinding mills: 1. Mill Types: - Ball Mill: A traditional ball mill is commonly used for grinding microsilica. It relies on the impact and attrition forces to reduce particle size. It is effective for both wet and dry grinding. - Vertical Roller Mill (VRM): VRM technology is known for its energy efficiency and the ability to grind materials into a narrow particle size distribution. It is suitable for grinding microsilica. 2. Grinding Process: - The grinding process involves feeding microsilica particles into the grinding mill. The grinding media (balls or rollers) inside the mill crush and grind the microsilica particles into a fine powder. 3. Particle Size Distribution: - Controlling the particle size distribution is crucial for achieving the desired properties in the final product. The grinding mill should be equipped with mechanisms to control and monitor particle size distribution. 4. Mill Design and Components: - The design of the grinding mill, including the type of grinding media, liners, and the grinding chamber, influences the efficiency and performance of the milling process for microsilica. 5. Air Classification (Optional): - In some cases, air classification systems are integrated into the grinding process to separate fine particles from coarser ones, ensuring a more uniform product. 6. Control Systems: - Advanced grinding mills often come with automated control systems to regulate various parameters such as feed rate, mill speed, and product fineness. Ijdpfxjq Nxp So Adwoal 7. Material Handling: - Efficient material handling systems are essential to transport microsilica to and from the grinding mill. This may involve pneumatic or mechanical conveying systems. 8. Cooling Systems: - Grinding processes generate heat, and efficient cooling systems are often integrated to maintain the temperature within a controlled range. 9. Dust Collection: - Microsilica powder grinding can produce airborne dust. Dust collection systems are necessary to maintain a clean and safe working environment. 10. Quality Assurance: - Grinding mills for microsilica should be equipped with quality assurance features, such as in-line particle size analysis, to ensure consistency in the final product. When selecting a microsilica powder grinding mill, factors such as production capacity, energy efficiency, and the required particle size distribution should be considered. Additionally, mills should be chosen based on the specific characteristics of the microsilica being processed and the intended application of the final product.

Condition: used, Year of construction: 2009, Briquetting press with hopper Motor 7.5 kW Briquette diameter: 50 mm Throughput capacity: 80 - 100 kg/h Weight: approx. 870 kg Oil capacity: 100 L With oil heating, agitator, and screw discharge With fill level sensor With automatic start Container size: 1500 x 1500 x 900 mm Overall dimensions: 2300 x 1800 x 1200 mm Operating hours: 3370 h Storage location: Nattheim Isdox Twb Sspfx Adwoal

Condition: used, Year of construction: 1994, pressure 600 t stroke 100 mm no. of strokes 45 /min distance between columns 580 mm dayligth 460 mm Ijdsw U Ekpopfx Adwoal table surface area 550 x 620 mm ram surface 550 x 430 mm ram adjustment 50 mm power requirement 15,0 kW Weight 13,5 t dimensions (WxDxH) 1,5 x 2,45 x 2,75 m Nominal force travel 1.7 mm Nominal energy 10.2 kJ With knuckle-joint drive, flywheel brake, hydraulic clutch, press frame balancing, self-monitoring control system

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, with lifting-tilting device Technical Data: Manufacturer: Presto Model: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Binding: 3-fold, wire, manual Throughput capacity at bulk weight: - 35 kg/m³: 1.3 t - 60 kg/m³: 1.7 t Iaedpfx Adjx Uz Daswsl - 100 kg/m³: 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. You can find a video on our website or YouTube channel. Viewings, including under power, are possible by appointment at any time. On request, we can also carry out tests with your material for an additional fee. If you have any questions about the machine, we will be happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Fridays from 08:00 to 13:00. Please note: All technical data is based on manufacturer specifications. We assume no liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Condition: used, AGOSTINO COLOMBO G250 Iaodpfxov Sya As Adwsl

Condition: used, Year of construction: 1984, pressure 1000 t stroke 200 mm total power requirement 30 kW Iajdpfxjyacpao Adwjl weight of the machine ca. 8 t multiple images available

Condition: new, Year of construction: 2025, power: 300 kW (407.89 HP), A ball mill is a key equipment in the grinding process of barite. It is designed to grind and blend solid or hard materials into smaller pieces, particularly powder. In a barite grinding plant, ball mill is often used for grinding barite into an ultrafine powder for various applications. Here are key features and aspects of a ball mill used for barite grinding in a plant: 1. Mill Structure: - The ball mill for barite grinding typically consists of a horizontal cylindrical shell with ends that are flanged and bolted on. The ends may contain openings for feeding and discharging the barite. 2. Grinding Media: - Steel or ceramic balls are commonly used as grinding media in the ball mill. The grinding media helps in the grinding process by reducing the size of the barite particles. 3. Rotation: - The mill rotates on its horizontal axis. The rotational motion of the mill, driven by a motor, causes the grinding media to cascade and grind the barite. 4. Feed and Discharge: - Barite is typically fed into the ball mill through a hopper or a conveyor. The ground barite particles are discharged from the mill through a discharge end. 5. Control System: - Modern ball mills are equipped with control systems to monitor and regulate critical parameters, such as mill speed, feed rate, and temperature. This allows for precise control of the grinding process. 6. Size Reduction: - The primary purpose of the ball mill is to reduce the size of barite particles. Grinding occurs as the barite is subjected to the impact and friction forces of the grinding media. 7. Classification: - Depending on the desired fineness, a classification system may be integrated into the ball mill to separate fine particles from coarse ones. This ensures that the final product meets the required specifications. 8. Dust Collection: - A dust collection system may be incorporated to capture and collect fine particles generated during the grinding process, ensuring a clean and safe working environment. 9. Liners: - The interior of the ball mill is often lined with wear-resistant materials, such as steel or rubber, to protect the mill shell from abrasion and ensure longer equipment life. 10. Application in Barite Processing: - The ball mill in a barite grinding plant is a crucial piece of equipment for processing barite ore into a fine powder. This powder is used in various industries, including oil and gas drilling, coatings, and pharmaceuticals. Iaedpeq Ngafofx Adwel 11. Safety Features: - Safety features, such as monitoring devices and emergency shutdown systems, are typically incorporated into ball mills to ensure safe operation. The specific design and features of a ball mill for barite grinding can vary among different manufacturers and applications. It is essential to follow proper procedures and guidelines for the operation and maintenance of the equipment to ensure optimal performance and longevity.

Condition: used, Year of construction: 2018, _____ Description: Year of manuf. : 2018 Control : Iajdpjxgpwpsfx Adwol Technical data Bending length:4080 mm Pressing force:170 t Column passage:4404 mm Tools:included in the scope of delivery Equipment Axis stop:4-axis Angle measuring system:ACB Laser Manual Support bracket:1x

Condition: used, Year of construction: 1997, pressure 1000 t distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min distance table/ram, max. stroke up, adjustment up 1295 mm table surface area 1250 x 800 mm table height over floor 670 mm side window 830 mm capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t stroke of ejector in ram 23 mm ram surface 1250 x 800 mm ram adjustment 20 mm Isdpfxovuukus Adwjal feeding length transfer 0 - 250 mm closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min power requirement 135,0 kW weight 120,0 t Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Baler Presto HPK 50 HS, Year of Manufacture 2014 Manufacturer: Presto Model: HPK 50 HS Year of Manufacture: 2014 Drive: 30 kW Pressing Force: 50 t Operating Hours: 7145 Filling Opening: 1600 x 650 mm (L x W) Channel Cross Section: 700 x 950 mm Maximum Filling Volume: 1.06 m³ Cycle Time: 20 s Tying: 4-fold Throughput Capacity at 35 kg/m³: 5.5 t/h Iodpjx Uzzxjfx Adweal 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8420 x 1900 x 2400 mm (L x W x H) Machine Weight: approx. 10,500 kg Materials: Paper, Cardboard, Film, PET Bottles Remarks: Blades and counter-blades as well as all sliding plastics have been replaced. The baler is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. Operating manuals and CE declaration are available. Inspections, including under power, are possible by appointment at any time. Upon request, we also conduct tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer’s specifications. We assume no liability for the information provided or for any potential errors. The offer is non-binding and subject to prior sale and revocation at any time. Viewings are possible by arrangement. Sale is ex works against advance payment, without warranty or guarantee.

Year of construction: 2025, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time ceramic ball mill Working principle when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding. Working Principle of Ceramic ball mill ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force. Iedpevzx Auofx Adwoal Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits. The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers. Features of Cement Mill Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired. Working Principle of Cement Mill The cylinder will rotate by the transmission device. Due to the inertial centrifugal force, the steel balls will stick on the liner plate and rotate with the cylinder together. When the steel balls come to a certain height, it will fall down by gravity and impact the raw material. And the repeated going-up, falling down, slide and roll of the steel balls can grind the raw material together with the liner plates.

Condition: used, Year of construction: 1993, Pressure 1500 t distance between columns 5050 mm stroke 1100 mm Distance table/ram, stroke up 2300 mm Table surface area 5000 x 2700 mm pressure of drawing cushion in table 320 t Die cushion stroke in table 300 mm Die cushion area in table 4300 x 1830 mm Die cushion pressure in ram 120 t Die cushion stroke in ram 200 mm Die cushion area in ram 3410 x 1650 mm Ram surface 5000 x 2400 mm Speed down 360 mm/s Speed up 168 - 505 mm/s Working speed 19 - 86 mm/s Oil volume 10500 l Iajdpfxsvuucqj Adwel Power capacity 450,0 kW Weight 400,0 t Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m Height above floor 8,21 m Height below floor 4,0 m year of manufacture 1983 - overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning / stroke limitation (adjustment of the spindle approx. 500 mm, max. dampening force approx. 750 t, dampening stroke max. approx. 30 mm), controllabel dependant on pressure/time and way as is where is, WITHOUT dismantling, WITHOUT loading

Condition: good (used), Year of construction: 2016, Avermann Baling Press, Model AVOS 1410 BR5 – 45/80, Pressing Force 80 t, Year of Manufacture 2016 Technical Data: Manufacturer: Avermann Maschinenfabrik Model: AVOS 1410 BR5 – 45/80 Year of Manufacture: 2016 Pressing Force: 80 t Drive Power: 45 kW Feed Opening: 1,400 x 1,000 mm Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Throughput at 100 kg/m³: 17.5 t/h Bale Dimensions: 1,100 x 750 mm (W x H), length variable Bale Weight: up to 600 kg, depending on material Tying: 5-fold vertical, automatic Machine Dimensions: approx. 10,850 x 2,400 x 3,800 mm (LxWxH) Machine Weight: approx. 18,000 kg Remarks: The baler is still in operation and can be inspected upon request. It is expected to be available from the end of February 2026. A matching WESTERIA conveyor belt is optionally available. The main cylinder was replaced in November 2025. Additional photos available on request. Please feel free to contact us. Please note: All technical data are based on information provided by the manufacturer. We assume no liability for the accuracy of these details or for any errors. This offer is subject to change, prior sale, and withdrawal at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee. Iedpfsx Uzy Uox Adwsal

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, functionality: fully functional, Baler Presto CC 20 M, year of manufacture 2019, pressing force 20 t, with retention device. Technical data: Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Iaodjx Uzynspfx Adwjl Operating hours: 1022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Tying: 3-fold, manual Throughput capacity at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find a video on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a service fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the information given or for any potential errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. The sale is ex location, without warranty or guarantee.

Condition: good (used), Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Baler Presto CC 40 M Technical specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Tying: 4-fold, polyester strapping, manual Throughput at bulk density of 35 kg/m³ – 1.8 t/h 60 kg/m³ – 2.5 t/h 100 kg/m³ – 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are available. Note: Channel exit is fully automatic and self-regulating. Inspections, including powered demonstrations, are possible at any time by prior arrangement. Upon request, we can also perform tests with your material for a nominal fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday between 08:00 and 14:00, and Friday from 08:00 to 13:00. Iasdpfxex Uzxks Adwol Please note: All technical data are based on manufacturer information. We do not assume any liability for the supplied information or possible errors. This offer is subject to change, prior sale excepted, and may be withdrawn at any time. Inspections are available by appointment. Sale is ex works, advance payment required, without warranty or guarantee.