Bale press

Presona LP 85 VH2

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Rbedpfsvgrh Usx Adbot Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, transport height: 2,300 mm, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Technical specifications baler: Drive: 37 kW Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Rsdpfx Ajxl Rqbedbjbt Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Rbsdpfx Asv T I Evodbjt Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2017, operating hours: 19,187 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, overall weight: 52,000 kg, Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 140 Year of construction 2017 Working hours 19,187 hours, stand October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 226 kW Rbsdpfxoxrta Ej Adbot Full load current 428 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 27,000 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 52 tons Technical data chain belt conveyor: Manufacturer Bollegraaf Typ HBT 1216 Year of construction 2009 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Weight 16 t Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Comments: The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2026. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2002, pressing force: 115 t, power: 150 kW (203.94 HP), For sale: Paal Konti 425 D horizontal baler Technical specifications: Manufacturer: Paal Type: Konti 425D Year of manufacture: 2002 Feed opening: 102 x 200 cm Drive power: 2 x 45, 2 x 75 kW Rbjdpfjycf R Sjx Adbot Pressing force: 115 t Operation: Horizontal, fully automatic Bale weight: 550-850 kg Pressing weight: 36 t PRICE ON REQUEST!

Condition: used, Year of construction: 1994, pressing force: 30 t, LIKON 200C Horizontal Baler Technical specifications: - Motor power: 22 kW - Year of manufacture: 1994 - Equipped with oil cooler - Horizontal tying: 4-fold - Pressing force: 30 t - Overall dimensions of the baler: 10,000 x 2,000 x 2,750 mm - Weight of the baler: 10 t - Loading opening dimensions: 1,400 x 700 mm - Bale dimensions: 700 x 1,100 x 1,000–1,200 mm, variable length - Filled with hydraulic oil - No binding wire included - Previously operated without conveyor belt in a print shop, only processed dry-shredded printing waste! - Engine hours: 62,639 The baler is in good condition, ready for operation. Rbsdpfxeyb Ndao Adbjt PRICE ON REQUEST!

Condition: good (used), Year of construction: 2016, Avermann Baling Press, Model AVOS 1410 BR5 – 45/80, Pressing Force 80 t, Year of Manufacture 2016 Technical Data: Manufacturer: Avermann Maschinenfabrik Model: AVOS 1410 BR5 – 45/80 Year of Manufacture: 2016 Pressing Force: 80 t Drive Power: 45 kW Feed Opening: 1,400 x 1,000 mm Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Throughput at 100 kg/m³: 17.5 t/h Bale Dimensions: 1,100 x 750 mm (W x H), length variable Bale Weight: up to 600 kg, depending on material Tying: 5-fold vertical, automatic Machine Dimensions: approx. 10,850 x 2,400 x 3,800 mm (LxWxH) Machine Weight: approx. 18,000 kg Remarks: The baler is still in operation and can be inspected upon request. It is expected to be available from the end of February 2026. A matching WESTERIA conveyor belt is optionally available. The main cylinder was replaced in November 2025. Additional photos available on request. Please feel free to contact us. Please note: Rodpjx Uzy Ujfx Adbjbt All technical data are based on information provided by the manufacturer. We assume no liability for the accuracy of these details or for any errors. This offer is subject to change, prior sale, and withdrawal at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee.