Used Powered Conveyor for sale (45,135)

Condition: excellent (used), REF: MM6164 Ppedpfx Ajw H I Agjfhjl 1 x Inclined conveyor with height adjustable feet, single-speed. Previously used as an outfeed conveyor for a VFFS bagging machine.  Technical specification ⚙️ ✅ Belt diameter - 2950mm long x 250mm wide. ✅ Infeed height - 350mm.  ✅ Outfeed height - 850mm.  ✅ Overall dimensions - 2950mm long x 450mm wide x 850mm high. ✅ Electric supply - 240 V / 50 hz / 1 phase.

Condition: used, Weber Loading Conveyor Model CZB Stainless steel Ppsdpfx Ajxtfz Rofhel

Condition: good (used), Saxon Bag Sealer Stainless Steel With Stainless Steel Conveyor 230 Volts Single Phase Power Height adjustable mast Mobile on castors Fixed adjustable feet also Psdpfxov Dm Dls Afhjpl Conveyor belt dimensions 1500mm L x 400mm W

Condition: excellent (used), Year of construction: 2010, Converging Solutions Converging Conveyor Model: Integrator 3 Syncro Serial number: CS5653 Year of construction: 2010 Ppedpfx Ajv Tx Uzjfhol 230 V, 16 A Belt width: 680 mm and (6x) 320 mm Clearance: 680 mm x 190 mm Total dimensions: 2280 mm x 850 mm x 1240 mm.

Condition: excellent (used), Converging Solutions converging conveyor Model: High Speed Variable speed control Serial number: 5054 Year of construction: 2002 240 V, 1 Ph, 50 Hz, 16 A Belt width: 625 mm and (3x) 135 mm Ppsdpfsv Tz Tmsx Afhel Total dimensions: 1460 mm x 1000 mm x 1140 mm.

Condition: new, New Conveyor with overhead feeder hopper Both units are mobile on castors Podpfewd Nthox Afhopl Feeder hopper with opening end door, adjustable exit gate to conveyor Feeder hopper dimensions 800mm x 740mm x 600mm deep Conveyor belt dimensions 1800mm x 230mm W x 1260mm H Conveyor height is adjustable VFD on conveyor drive

Condition: excellent (used), 1 x Incline conveyor. Located Melksham. Lift out £30. UKFM1-6799 Pjdpoxc H Nbefx Afhopl

Condition: good (used), Year of construction: 2014, clamping force: 11,500 kN, Equipment: documentation/manual, MC6 controll panel Blue power Clamping force: 1150 t Tie bar distance HxV: 1580x1280 mm Ppodpfx Aoyfgx Asfhsl Screw diameter: 90 mm Shot weight: 2084 g Shot volume: 2290 cm3 Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Weinig LTB250/3500G belt lifter Length 3500mm Width 250mm Ppodpfju Eclrox Afhjl Speed 22m/min

Condition: used, Chip conveyor, chip elevator, inclined conveyor belt, used machine Manufacturer: Mayfran Type: POO.96M3806.01 Overall dimensions: Psdjydbzvepfx Afhepl Width: 6300 mm Depth: 1050 mm Height: 1820 mm Belt size: 6600 × 330 mm Electrical data: 400 V Slat size: 30 mm Slat pitch: 245 mm

Condition: good (used), Year of construction: 2005, Clamping force: 110 t Screw diameter: 35 mm Shot weight: 100 g Ppedsxqd Nbspfx Afhol Distance between tie bars V: 680 mm Distance between tie bars H: 740 mm Type: Horizontal Drive: Hydraulic Working hours : 54.290 h

Condition: used, 5328 - BUCKET CONVEYOR , BUCKET ELEVATOR , VERTICAL CONVEYOR , BUCKET ELEVATOR , BUCKET BELT Pjdpfx Aeh D R Ddsfhepl Run-up height: 18 m Diameter of treck: 310 x 220 mm Overall size: 1050 x 350 mm x Full height: 26 m Voltage: 380 V

Condition: good (used), Overall size: 2510 x 550 mm Ppjdpfxov S Uh Uj Afhel Roller surface size: 2000 x 420 mm Height: 940 mm Roller diameter: 50 mm Aluminum frame, stainless steel roller! Set: 15 pieces Price per piece

Condition: used, roles: 3 Psdpfx Aoyffyfjfhspl speeds: stepless

Condition: used, Conveyor belt, belt conveyor, magnetic conveyor belt NEUHÄUSER Type 1700 x 50 / 1,060 + 110S Year of manufacture: approx. 2003 Usable length: 1700 mm Belt width: 50 mm Belt length: 3700 mm Aluminium frame profile cross-section H x W: 60 x 80 mm Pjdpfx Afoxcbppohspl Roller diameter drum motor: 110 mm Roller width drum motor: 250 mm Belt speed: approx. 30 m/min. Motor power: 0.22 kW Power connection: 400 Volt, 50 Hz - Drive via drum motor BDL Type 110S - Magnetic rail under belt conveyor - Belt body made of aluminium system profile with 12 mm slot - 1 piece conveyor belt NEW 3700 x 50 mm - Front frame profile slightly damaged (see photo), no impact on function - Guide at front reversing roller broken off (see photo) Overall dimensions L x W x H: 1820 x 370 x 120 mm Weight: approx. 30 kg

Year of construction: 2019, condition: excellent (used), Wemo WCS-R 400x2500 (2019) Conveyor belt Dimensions: 400x 2500 mm Ppodpfx Ajx U Dh Ujfhsl Year : 2019

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: 867724419, This is a multi-tank conveyor dishwasher from the premium manufacturer Hobart, model FTNi-2-E-AN-R-DL3, C25, year of manufacture 2023. The machine features an infeed from right to left and is divided into pre-scraping zone, main wash zone, rinse zone, drying zone, and discharge zone. It is equipped with a CLIMATE C25 exhaust air heat recovery system and has undergone a thorough inspection in our workshop. The machine is in excellent used condition, both technically and visually. Machine configuration: - FTNI-03-6/4 Conveyor machine 612/440 - Model: Multi-tank conveyor dishwasher - Type: Profi FTNI 2-E-AN-R-DL3, C25 - Suitable ware: according to DIN EN 17735 - Transport direction: right/left - Heating type: electric - Plate capacity: 2,380 plates/h - Max. plate capacity: 2,710 plates/h - Conveyor width/height: 612 mm/440 mm - Hygiene performance: according to DIN EN 17735 - Infeed component: Infeed 2 (L=1100 mm) - Pre-wash: Wash zone E (L=500 mm) - Main wash: Wash and Neutral zone AN (L=1400 mm) Ppjdpjyc Uu Hsfx Afhsl - Rinse: Rinse zone R (L=650 mm) - Drying: Drying zone DL (L=1100 mm) - Discharge: Discharge module 3 (L=800 mm) - Exhaust system: CLIMATE C25 - Machine length: 5,550 mm Removable filter drawers in the infeed area, 3DRY drying The images shown are example photos of a very similarly configured conveyor dishwasher. Original photos will follow shortly. Machine availability approx. 10 kW Our used equipment service for you: - 6-month warranty on electrical parts, limited to replacement of defective parts, excluding installation and removal costs - High-quality branded equipment at fair prices - Professional overhaul/inspection & expert cleaning - Tested & fully functional - Flexible shipping or self-collection options - Competent advice – before and after your purchase - Provision of user manuals, wiring diagrams, and spare parts - DGUV V3 inspection Multipurpose conveyor belt for standard dishes, tray service trays, and deep plates, 18 settings per meter; additionally equipped with GN supports for gastronorm pans and trays at an incline, finger spacing 55 mm PERMANENT-CLEAN soil removal, AUTO-CLEAN self-cleaning system Technical data: - Separate filling - Info Tronic - SmartConnect (WiFi connectivity) - Autotimer - Emergency stop in the infeed hood - On/Off switch for the conveyor at the infeed - USB interface - Standard voltage 400/50/3N - T6 separation between wash and rinse - Serial number: 867724419 - Year: 2023 Subject to change and errors. Do you have questions, need advice, or would like to inspect the machine on site? You can reach us by phone during our opening hours: Monday-Friday 09:00-13:00 and 14:00-17:00. Sales are governed exclusively by our general terms and conditions (GTC).

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: Pedeydnigjpfx Afhjpl • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Condition: good (used), Year of construction: 1994, operating hours: 7,430 h, functionality: fully functional, overall weight: 38,000 kg, fuel type: hybrid, power: 1,500 kW (2,039.43 HP), output frequency: 50 Hz, type of output current: three-phase, motor manufacturer: Wärtsilä, Diesel Generating Set – 1.5 MWe / 50 Hz Wartsila Vasa 4R32 LN-E This Wartsila diesel generating set has been used exclusively for testing purposes by VTT Technical Research Centre of Finland and has accumulated only 7,430 operating hours since new. Originally, it was built as a conventional diesel engine capable of burning various heavy fuels with viscosities of up to 730 cSt at 50°C. The engine was subsequently upgraded by Wartsila to comply with the LN-E model specification for their 32-series engines and it was equipped with adequate fuel feeding systems, cylinder heads, pistons and liners for dual fuel (DF) and gas diesel (GD) operation. The upgrade included the installation of anti-polishing rings, an increase in engine output, and the implementation of a completely new control system. Pedpfjyfflzjx Afhjpl The unit has been used to test various fuels and components on behalf of Wartsila. It has been exclusively serviced by Wartsila and remains in good technical condition. Over the years, Wartsila has installed new components and control systems. At present, the engine is equipped to operate in three different modes: As a conventional diesel engine using heavy fuel oil (HFO); As a Wartsila 32DF (Dual Fuel) engine using natural gas and light diesel oil; As a Wartsila GD (Gas Diesel) engine, where gas is compressed to high pressure and injected into the cylinder, ignited by a pilot dose of light diesel oil. Naturally, to switch between modes, certain components—such as the turbocharger, cylinder liners, pistons, and cylinder heads—must be changed. All necessary components and much more additional spare parts (some brand new) are coming together in the same package. We can specify more in details upon request. Technical support for on-site installation can also be provided, subject to a separate agreement. The machine is currently located in Kotka and can be shipped by sea to any suitable destination port. Quotations are available upon request.

Condition: like new (used), Year of construction: 2024, Outfeed System 5.6m long belt 270mm wide. Min length 400mm Max Length 5000mm Sweeper 500mm push. New control System Podpfxeyfnbfo Afhepl New Belt New Gearbox for sweeper Sweeper movement by motor/gearbox

Year of construction: 2003, condition: good (used), Conveyor system (outlet) behind e.g. Weinig planing machine Max. wood length 3200 mm, with cross transport Podoydk Nvjpfx Afhspl With return belt 6000 mm

Condition: used, Length of roller conveyors - infeed 0 mm Length of roller conveyors - outfeed 0 mm Ppedpfx Afjd I Udhshjl Numbers of cross transfers 0 Stck.

Condition: used, Year of construction: 2018, length in total 3000 mm band width 200 mm conveying height 1900 total power requirement 1 kW weight of the machine ca. 1 t Pjdpfxev Sdyme Afhspl dimensions of the machine ca. 3x1x2 m

Condition: new, Year of construction: 2023, total length: 44,000 mm, total width: 1,000 mm, Empty weight: 37.000 kg Productivity: 1000 tph 1000x44400mm radial telescobic conveyor General Tech Spec of 150 Feet Radial Belt Conveyor Drive System Direct Accoupled Drive Drum 323* 12 mm rubber coated Reducer Yılmaz KR Series-VOLT 50hz-380V Bed Type SNH Series Felt Cast Iron Bed with Over Lubrication Platform Single Sided Walkway on main belt Band Tape TS 542 Norm 4 Layers, 4/2,10mm Width Direction Roll 12 units Nominal Capacity 800-1000 tph Drive 2.5” Standard Kingpin Paint Acrylic Raised stockpile height 15 meters Lowered stockpile height 4,3 meters Belt widths: 1200mm(26 meters)-1000mm(22 meters) Stinger width 1000* 19000mm Radial Drive Eletrical Motor/Gearbox connected to wheels by chain Radial Move 5 degrees Belt Rear Mounted on static pivot Stockpile capacity at 270 degrees15m height 140900 metric tons Drum 323mm dia, anti material sticking Ppjdpfxox D A S Uo Afhsl Main Belt 2x22 kw Motor Gearbox Stinger Belt Conveyor 2x22 kw Motor Gearbox Radial Tires 8 pcs- 315*65*22,5 Chained to Motors Radial Drives 2 pcs 3 kw Motor Gearbox Total Power 95 kw Transport Weight 35 tons Transport Dimensions 4400x29300x3500mm Control Full Automatic remote controlled Automation component Siemens Radial Tyres Hydraulic Swing for erection Erection Hydraulic Jacks for elevation Scraper Available at main belt and receiving hopper Cleaning Both belts have cleaning scraper under drive drum Receiving Chute included Discharge Chute to stinger belt Included Impact rolls Included at receiving chute section Control panel LCD screen and piano panel for back-up With Polypole automatic piling software and Siemens PLS option Fast delivery, high,quality, economical

Condition: good (used), Year of construction: 1993, operating hours: 604 h, Generator is in good condition, located on stock. Pedpfx Afevkvvqjhspl Technical specification shown on plate.