Used Pres Brake for sale (28,204)

Condition: good (used), functionality: fully functional, Year of construction: 2007, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Overhang: 305 mm Usable installation height: 440 mm Table height: 800 mm Table width: 90 mm Machine weight (approx.): 9,100 kg Machine height: 2,500 mm Equipment: - CNC control system Cybelec VisiTouch (retrofit 2026) - 2 pcs. support arms - Foot switch - Side protective doors - Laser safety device - Tool holder EHT Bwodpszt R D Dofx Adljw - Pneumatic die shifting - Crowning - Controlled axes: y1, y2, x, R

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, overall weight: 3,000 kg, HACO ERMS 2040 (83331) Technical condition: Good Stroke length: 2100 mm Tonnage: 40T Type of press brake: Synchronous Back gauge: X-axis CNC controlled, R-axis adjustable in height (manual) Length of back gauge: 800 mm Daylight opening: 400 mm Overhang: 200 mm Bwsdpfxo Adny Us Adljw Control system: ATS 595 (CNC control, NEW) Motor power: 4.1 KW 380V Tooling: New set of upper and lower blades Tooling standard: European standard Serial number: 83331 Overall width: 3000 mm Overall height: 2250 mm Overall depth: 1800 mm Weight: 3000 kg Year of manufacture: 2008

Condition: used, Year of construction: 2001, 3 x Trumpf bending machines (hydraulic press brakes): • TrumaBend V50 | Year of manufacture 1997 • TrumaBend V85 | Year of manufacture 1997 • TrumaBend V85 S | Year of manufacture 2001 Condition & Maintenance: As can be seen in the attached images, all machines have been regularly maintained as part of the annual safety inspection (UVV). The last inspection for all units took place in the summer of 2026. The machines are currently still in operation and are fully functional. Inspection & Contact: An on-site inspection is possible on weekdays until 2:00 PM. Bwodpfx Adez Tfmrolow

Condition: used, functionality: fully functional, Year of construction: 1999, TRUMPF TrumaBend V85 press brake with 850 kN press force and 2.050 mm working length, Delem control, and synchronised Y1/Y2 ram axes — serviced yearly by TRUMPF TruServices, top condition, last maintenance 01/2026. Complete with segmented tooling (gooseneck punches and dies), CNC back gauge with X and R axes, and motor-driven Z-axis (1.370 mm travel). CAPACITY Press force kN: 850 Working length mm: 2.050 Distance between columns mm: 1.750 Throat depth mm: 410 Bwodpfj Agwvqjx Adlew Ram stroke mm: 215 Open height (daylight) mm: 385 Rapid approach speed mm/s: 200 Working speed mm/s: 1–11 Return speed mm/s: 135 CNC AXES X-axis (back gauge depth) mm: 600 R-axis (back gauge height) mm: 250 ACCURACY & CONTROL Controller: Delem MACHINE RUNNING TIMES Under power hours: 37.774

Condition: good (used), Year of construction: 1999, Used conventional press brake from Ermaksan Bwsdpfx Aj Adpq Iodlsw Type AP 3600 200 Capacity 3600 x 200 tons NC control with adjustable back gauge and stroke Includes a set of tools as shown in the picture.

Condition: like new (used), functionality: fully functional, Year of construction: 2001, stroke length: 365 mm, overall weight: 9,050 kg, pressing force: 85 t, clearance between the columns: 540 mm, table length: 2,100 mm, Equipment: CE marking, safety light barrier, The following 2 metre Trumpf press brake featuring the specific extended daylight configuration. The machine is in exceptionally clean, near-mint condition. This is largely because it is being sourced from an immaculate, highly regulated factory that manufactures components exclusively for the medical sector. Used Trumpf V series cnc pressbrake for sale Trumpf v85 2m x 85ton – 4axis cnc pressbrake / with Extended daylight and stroke Make: Trumpf Model: v85 Year: 2001 Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Crowing Complete with: • Extended stroke and daylight: 365mm maximum stroke / 535mm daylight • 2axis back gauge Bedpfx Ajzfp D Tjdleww • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition Delivery to your works, installation and tuition with your operators available.

Condition: used, total length: 4,600 mm, total width: 2,200 mm, total height: 3,000 mm, Year of manufacture: 2004 Weight: 21.500 kg Price: On request - Year: 2004 - CE marking present: Yes - Serial number: 12.2235 - Drive system: CNC - Control system brand: Delem - Power [kW]: 33.5 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 300 - Max. working width [mm]: 4300 - Column gap [mm]: 3700 - Crowning system: CNC-controlled - Punch holder: Hydraulic - Tool holder type: WILA-standard - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 4600mm x 2200mm x 3000mm (l x w x h) - Transport weight [kg]: 21500kg Bwsdpsyvt Dzofx Adlow - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, control type: CNC control, pressing force: 80 t, Equipment: safety light barrier, 1 Used Very Clean Amada 8025 cnc down stroke hydraulic pressbrake for sale The Amada HFT 8025 is a CNC hydraulic down-stroking press brake designed for precise sheet metal bending with an 80-ton pressing capacity. It is often equipped with the CD 2000 CNC control system, providing 4-axis control (typically Y1, Y2, X, and R) for high accuracy in industrial applications. Key Technical Specifications Year 2010 Feature Standard HFT 8025 Press Force 80 Tons (800 kN) Bending Length 2,500 mm Stroke Length 200 mm Open Height 470 mm Throat Depth 420 mm Bwsdpfeyzy D Ejx Adlow Motor Power 7.5 kW

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, stroke length: 365 mm, pressing force: 250 t, table length: 4,100 mm, Equipment: CE marking, safety light barrier, 1 used Edwards Pearson PR 250 Ton x 4 Metre (often listed as the 250/4100 model) is a heavy-duty, multi-axis CNC hydraulic press brake for sale - highly regarded in the metal fabrication industry for its robust build and longevity. Below is an overview of the technical specifications, variants, and common configurations for this machine based on historical industrial data and machinery listings: ⚙️ Core Technical Specifications • Bending Capacity: 250 Tonnes (Metric) • Max. Bend Length: 4100 mm (4.1 Metres) Year 2002 Bjdpoz Iqmrefx Adlsww • Foundation: Free-standing design 🛠️ Common Variants & CNC Controls Configured as a 6 axis machine featuring a 4 axis back gauge (X, R, Z1, Z2,) paired with a Cybelec DNC 1200 control unit. • Features hydraulic crowning system to keep bends precise across the full 4-metre span.

Condition: like new (used), Year of construction: 2022, pressing force: 100 t, A well-maintained and regularly serviced TRUMPF press brake is available. Number of strokes: approximately 860,000. The machine is in continuous operation, so it can be inspected and tested at our facility. The stated price is the net amount. Bwedpfx Aev E Nvaodlew

Condition: good (used), We offer a range of tools for press brakes, almost exclusively from the Trumpf brand: OW / OWZ: Upper tool (punch), Top Tool UW / UWZ: Lower tool (die/matrix), Bottom Tool/Die Details, prices, and specifications: OVERVIEW OF INDIVIDUAL SETS (Radius / Angle / Composition): 1. Upper tool (punch) – OW 210/S (R1 / h-240 / 28°) Set composition: 3 pcs x 500 mm, 8 pcs x 300 mm, 2 pcs x 250 mm, 4 pcs x 200 mm, 1 pc x 170 mm, 1 pc x 140 mm, 1 pc x 110 mm, 3 pcs x 100 mm, 2 pcs x 100R mm, 2 pcs x 100L mm, 1 pc x 75 mm, 2 pcs x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 2 pcs x 35 mm, 2 pcs x 30 mm, 2 pcs x 25 mm. Total length of the set: 6,760 m Price per meter: 1,069 EUR Total price of the set: 7,226 EUR 2. Upper tool (punch) – OW 200/S (R1 / h-220 / 86°) Set composition: 7 pcs x 300 mm, 7 pcs x 200 mm, 1 pc x 100R mm, 1 pc x 100L mm. Total length of the set: 3,700 m Price per meter: 935 EUR Total price of the set: 3,460 EUR 3. Lower tool (die) – EV 004 - W12 (R1 / h-150 / 30°) Set composition: 5 pcs x 500 mm, 1 pc x 200 mm, 1 pc x 180 mm, 3 pcs x 100 mm, 1 pc x 55 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 3,485 m Price per meter: 802 EUR Total price of the set: 2,794 EUR 4. Upper tool (punch) – OW 202 K (R1 / h-120 / 28°) Set composition: 6 pcs x 500 mm, 1 pc x 300 mm, 1 pc x 200 mm, 1 pc x 100 mm, 1 pc x 100R mm, 1 pc x 100L mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 4,050 m Price per meter: 735 EUR Total price of the set: 2,976 EUR 5. Lower tool (die) – EV 004 - W12 (R1 / h-100 / 30°) Set composition: 6 pcs x 500 mm, 1 pc x 300 mm, 1 pc x 200 mm, 3 pcs x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 4,050 m Price per meter: 668 EUR Total price of the set: 2,706 EUR 6. Lower tool (die) – EV/S-W10 (R1 / h-100 / 84°) Set composition: 2 pcs x 500 mm. Total length of the set: 1,000 m Price per meter: 601 EUR Total price of the set: 601 EUR 7. Upper tool (punch) – OW 280/K (R0.5 / h-140 / 80°) Set composition: 1 pc x 500 mm, 1 pc x 300 mm, 1 pc x 100R mm, 1 pc x 100L mm, 1 pc x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 1,350 m Price per meter: 735 EUR Total price of the set: 992 EUR 8. Lower tool (die) – EV 005 W16 (R1.6 / h-150 / 30°) Set composition: 6 pcs x 500 mm, 1 pc x 300 mm, 3 pcs x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm, 1 pc x 200 mm. Total length of the set: 4,050 m Bwodpfozrw A Rjx Adljw Price per meter: 802 EUR Total price of the set: 3,247 EUR 9. Lower tool (die) – EV 006 W 20 (R2 / h-150 / 30°) Set composition: 6 pcs x 500 mm, 2 pcs x 300 mm, 1 pc x 200 mm, 3 pcs x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 4,350 m Price per meter: 802 EUR Total price of the set: 3,487 EUR Total length in the package: 36.960 m Please feel free to request a custom price for the entire tool package!

Condition: new, functionality: fully functional, Year of construction: 2026, oil tank capacity: 200 l, overall weight: 7,500 kg, total length: 3,850 mm, total width: 1,650 mm, total height: 2,680 mm, power: 8.5 kW (11.56 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, pressing force: 110 t, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, CNC press brake 110 t × 3200 mm – MTP SPB 110/3200 with Delem DA-66S, 6+1 axes – NEW, IN STOCK New electro-hydraulic servo-synchronised CNC press brake with 1100 kN bending force and 3200 mm worktable, controlled by the Delem DA-66S 24" touch-screen CNC with 3D graphics. 6+1 CNC axes (Y1, Y2, X, R, Z1, Z2 + V crowning), servo main drive, laser safety guard. The machine is in stock in our warehouse and ready for immediate dispatch. KEY FEATURES • Delem DA-66S CNC: 24" full-touch colour screen, 3D graphics, automatic bend-sequence calculation, Profile-S2D offline software • 6+1 axes: Y1, Y2 (ram), X, R (back gauge depth/height), Z1, Z2 (finger positioning) + V (CNC crowning) • Electro-hydraulic servo synchronisation of Y1/Y2 with GIVI (Italy) linear scales on both sides, resolution 0.005 mm • ESTUN servo main motor – up to 60% energy saving, quiet operation • Rexroth hydraulic valve block and pump, NOK seals, EMB fittings • CNC motorised wedge crowning (V axis) – automatic deflection compensation along the full table length • Servo back gauge on Taiwan ball screws and double linear guides, 3-section adjustable stop fingers • Upper tool quick clamping (accuracy 0.02 mm), height-adjustable front sheet supports • Safety: DSP (Italy) laser guard, rear light curtain, KACON foot switch, Schneider electrics • Rigid frame verified by FEA, machined in one set-up on a CNC gantry machining centre TECHNICAL DATA • Nominal force: 1100 kN (110 t) • Worktable length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 400 mm • Ram stroke: 200 mm • Max. opening height: 480 mm • Ram speed: rapid approach 180 mm/s, working 13 mm/s, return 170 mm/s • Ram repeatability: ±0.01 mm; positioning accuracy ±0.02 mm • Back gauge repeat positioning accuracy: ±0.02 mm • Workpiece straightness: 0.3 mm/m • Main motor: 8.5 kW servo • Dimensions (L × W × H): 3850 × 1650 × 2680 mm • Weight: approx. 7 t • Year of manufacture: 2026, CE marked STANDARD DELIVERY Press brake, levelling bolts, foot switch, operation manual, CNC manual, hydraulic and electrical schematics, foundation drawing, CE certificate. Condition: new. In stock – immediate dispatch. Terms: price net, EXW Sokołów Podlaski, Poland. 12 months warranty on parts. Documentation and manual included. Transport can be arranged to any European destination – delivery quote on contact. Bwjdpfxoz I S Dro Adlew

Condition: excellent (used), Year of construction: 2000, AMADA PROMECAM MODEL HFE 8025 7 AXIS CNC 80 TONS X 2500 HYDRAULIC DOWNSTROKING PRESS BRAKE description TYPE HYDRAULIC DOWNSTROKING CAPACITY 80 TONS CONTROL OP 2000 CNC NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 BENDING LENGTH 2500 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW APPROACH SPEED 100 BENDING SPEED 10 Bwjdpfxezbzq Sj Adlew RETURN SPEED 100 SERIAL NO.V000426 GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED year 2000 price POA

Condition: good (used), Year of construction: 1995, Used press brake by Baykal Type APH 3106 120 Capacity 3100 x 120 tons Bsdpfx Adoz Il Epjlsww NC control Adjustable back gauge and stroke depth Includes a set of tools

Condition: good (used), Year of construction: 2012, Used press brake from Knuth Bedjzz Rz Sepfx Adloww Capacity: 4100 x 250 tons Cybelec DNC 880S CNC control Y1, Y2, X and R axis CNC Hydraulic crowning Amada / Euro top clamp 1 set of complete tooling

Condition: excellent (used), Year of construction: 2010, Very well-maintained press brake from SafanDarley. Type EHP LS 50 15 12 CL Capacity: 1550 x 50 tons New Delem DA69T control system Y1, Y2, X, R, Z1, and Z2 are CNC controlled Hydraulic Wila New Standard upper clamping system Bwjdpoz S H Eaofx Adljw Pneumatic Wila 13mm lower clamping system.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, pressing force: 230 t, Equipment: CE marking, documentation/manual, safety light barrier, Darley hydraulic press brake, 230 tons x 6200 mm, CNC control Delem DA65W Y1/Y2/X/R + crowning + laser safety system. Machine in good condition, with annual maintenance performed by Darley. Bwede Abalwopfx Adljw

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: PB16040, stroke length: 250 mm, throat depth: 400 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table height: 850 mm, oil tank capacity: 400 l, overall weight: 12 kg, total length: 4,500 mm, total width: 2,000 mm, total height: 2,650 mm, power: 18 kW (24.47 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, pressing force: 160 t, clearance between the columns: 3,500 mm, distance table to ram: 3,500 mm, ram plate length: 4,000 mm, ram plate width: 1,900 mm, table length: 4,000 mm, table width: 100 mm, type of input current: three-phase, Equipment: CE marking, safety light barrier, High-end electro hydraulic servo system, upper slider controller by the full loop synchronization. Main servo motor guaranteed high efficiency, lower noise, energy saving. Mechanical compensation on crowning of worktable and deformation compensation on throat, ensuring bending strength and precision. Qualified accessories used to ensure press brake’s long-term stability running. Ball screw and linear guide adopted to ensure accurate and fast backgauge. Movable front support helps with bending convenience. 2D and 3D multifunctional CNC system from Delem and Cybelec. Equipped with side guards and closed rear guards. 8+1 axis/6+1 axis control European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 4000 mm 3 Worktable height 850 mm 4 Distance between vertical 3500 mm 5 Stroke 250 mm 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1 Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg Bodoy U Hmgjpfx Adlsww No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA69T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: good (used), Year of construction: 2002, Used 2-meter CNC press brake Bedpfez Hwi Rox Adleww Type: V85 Capacity: 2050 x 85 tons Delem CNC control Year of manufacture: 2002 Stroke length: 365 mm Y1, Y2, X1, X2, R1, R2, Z1 and Z2 CNC controlled Automatic Wila NS clamping system Adjustable table CNC crowning

Condition: good (used), Year of construction: 1991, machine/vehicle number: P 10106, Offer 26338 Technical data: - Max. working length: 3340 mm - Stand opening: 2600 mm - Max. pressing force: 100 t - Overhang: 400 mm - Max. stroke: 100 mm - Max. installation height: 370 mm - Table height (approx.): 960 mm Bwedpez R Rkfefx Adlow - Approach speed / rapid traverse: 85 mm/s - Pressing speed: 10 mm/s - Retraction speed: 80 mm/s - Drive power: 9.5 kW - Space requirement (approx.): W 3500 x H 2350 x D 1950 mm - Weight (approx.): 6.8 t - Including: - CNC control system DELEM DA 58 - Rear stop 0 - 600 mm

Condition: excellent (used), Year of construction: 2006, Pressing force: max. 850 kN Stroke: max. 215 mm Operating pressure: max. 300 bar Response time: max. 95 ms Follow-up travel at 220 mm/s: max. 10 mm Follow-up travel at 160 mm/s: max. 8.5 mm Safety distance: min. 190 mm Weight of the press: 7,300 kg Voltage: 3 x 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V= Compressed air connection: 6 bar Bwedpfez Hl Nfex Adlow

Condition: as good as new (ex-display), overall weight: 7,700 kg, United Austrian Iron and Steel Works press brake Bjdpfxoz Hbu Re Adlsww Type: AG BAHM 100 4 Capacity: 4000 x 100 tons Weight: 7700 kg The machine can be placed in a museum and is sold as is, where it is.

Condition: excellent (used), Year of construction: 2008, Well-maintained used press brake from SafanDarley. Type EHP LS 230 43 37 Capacity: 4300 x 230 tons New Delem DA69T control system CNC-controlled Y1, Y2, X, R, Z1, and Z2 axes Hydraulic Wila New Standard top clamp Pneumatic Wila 13mm bottom clamp. Bwjdpfx Adoz S H Hdelow

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Bedpfx Adeyy Hgqeleww Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: excellent (used), Year of construction: 2012, TruBend 5230 including robot, well-maintained, in excellent condition. Bodpfez Uxk Hjx Adljww