Used Production Lathe for sale (20,973)

Condition: excellent (used), Year of construction: 2018, operating hours: 2,651 h, functionality: fully functional, Rotatable diameter as Swiss-type lathe: 38 mm Rotatable diameter as conventional lathe: 42 mm Guide system: JBS double cone Parts catcher included: for both short and long parts Turning length in a single pass: approx. 320 mm (simultaneous finish and roughing) Simultaneous machining: front and rear sides Hodpfoxnbc Hjx Aabofn Control: Fanuc Series 31i-Model B In-process measurement: Blum probe Bar feeder: FMB LSK38, max. bar length extended to 3300 mm Oil mist extractor: UC1SD High-pressure system: available, 100 bar Lubricant: coolant Various accessories: guide channels, guide tubes, various tools, various double cone bushings

Condition: excellent (used), CATALOGUE NUMBER 7753 TECHNICAL DATA - max diameter of processed dowels: 130mm - installed bushing: 110mm - max input material diameter: 160mm - min input material length: 800mm - max machining allowance per side: 15mm - knife head drive motor: 15kW - 3 feed speeds + forward/reverse - feed motor: 1.1kW In sequence: Hjdpfx Aaoxhddgsbofn - 3 toothed feed rollers - 3-knife head - 3 smooth outlet feed rollers - dimensions (L/W/H): 3100x1400x1500mm - weight: 2100kg ADVANTAGES - manufactured in Poland - 3-knife head - used dowel lathe, very good condition Net price: PLN 36,900 Net price: EUR 8,680 (according to the rate of 4.25 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: used, Year of construction: 1979, Year 1979 Retrofit 2013 max. turning diameter 1300 mm table diameter 1000 mm Hfsdpoxmk E Uefx Aabsn workpiece height max. 1500 mm working lenght 1050 mm 280 U/min. T-slots 48 x 28 speeds 4,75 - 250 U/min rapid traverse 6000 mm/min In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Retrofit 2013 Precision class: IT7 Technical features - 4-fold swivel head Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Hedpfx Ajxmi A Esabefn Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, machine/vehicle number: RC Rc42µRc14V14/1620, Serac Krones Posimat 1.5L Bottle Bleach Filling Line (Line 4) Previous use in bleach bottle facility Comprising: Lanfranchi bolted stainless steel bottle silo>br>Posimat Access Series N37 bottle unscrambler (2014) Krones Contiroll K745 R66 labeller (2010) Krones Checkmat K731 H06 inspection system Serac RC Rc42µRc14V14/1620, 42 head rotary double turret bleach filler (2015) with cap applicator, hopper elevator Hfodpfx Aoxn N D Eeabon

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard Hfsdpexndblefx Aaben - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: used, functionality: fully functional, Conventional Lathe WEILER CONDOR VS2 Technical details Spindle bore: 38 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 200 mm Hedpfx Aaoxmg S Robofn Turning length: 750 mm Spindle speed (max.): 2,800 rpm Spindle speed (min.): 12 rpm Overall length: 1,700 mm Overall width: 650 mm Overall height: 1,500 mm Total weight: 800 kg

Condition: excellent (used), Locatelli Oriental Matik 1350 lathe component grinder Working length: 1350 mm Two grinding units Six stations for grinding components Minimum grinding length: 220 mm Hsdsxf Thvjpfx Aabofn Maximum grinding length: 1350 mm Maximum grinding diameter: 120 mm

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 203351, total length: 3,750 mm, total width: 1,340 mm, total height: 1,870 mm, type of input current: three-phase, input voltage: 400 V, working width: 120 mm, power: 33 kW (44.87 HP), overall weight: 5,650 kg, The Schroeder PAKE 120 is a four-sided planing and profiling machine designed specifically for the precision processing of solid wood elements, especially in the production of parquet strips, floorboards, and other wooden components. Suitable for workpieces up to 120 mm wide, with adaptable tooling for various widths and profiles. The machine is designed to process short wooden elements starting from approximately 200 mm in length, making it ideal for parquet production. Depending on the configuration and material, the machine supports feed rates from 15 to 50 m/min, suitable for both high-volume production and precision work Hodpfx Asxm Stajabjfn

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Technical Features & Accessories: - Y axis - Accessory package with fixed and driven tool holders Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Hsdpfx Aexmapvjabsfn subject to prior sale!

Condition: good (used), Year of construction: 2014, functionality: fully functional, turning length: 700 mm, turning diameter: 500 mm, Fanuc Oi-TD cnc control 3-jaw chuck 12-fold revolver tail stock chip conveyor Hjdexa Dcaepfx Aabofn Technische Daten: / technical details Umlaufdurchmesser über Bett / rotary diameter over bed 612 mm max. Drehdurchmesser / max. turning diameter 500 mm max. Drehlänge / max. turning length 700 mm X-Weg / X-travel 250+50 mm Z-Weg / Z-travel 750 mm max. Drehzahl / max. spindle speed 3500 UpM /rpm Anzahl der Revolverplätze / number of tool places 12 Antriebsleistung Spindel 100%/30% ED / drive capacity spindle 100%/30%ED 15/18,5 kW Gewicht ca. / weight ca. 5600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard Hjdjxndbfopfx Aabefn - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Conventional Lathe WEILER Praktikant 140 B Year of manufacture: 1985 Working area: Centre height: 140 mm Centre distance: 650 mm Swing diameter over bed: 280 mm Swing diameter over cross slide: 190 mm Spindle: Spindle taper: DIN 55027/DIN ISO 702-3 Gr. 5 Hodjxmf Nnepfx Aabofn Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm Main drive: Drive power: 2.6 / 3.1 kW Speed range: 48 – 2,500 rpm Number of speeds: 16 Feed range: Number: 24, Longitudinal feed: 0.02 – 0.63 mm/rev, Cross slide: 0.006 – 0.2 mm/rev. Length x Width x Height: 1600 mm × 800 mm × 1300 mm Weight: Approx. 650 kg

Condition: used, Year of construction: 2016, IMPORTANT: The sale and delivery of this machine are strictly limited to customers whose registered office and delivery address are located within the European Union (EU). Delivery to recipients outside the European Union is excluded. Hfjdpfxow Tidqs Aabon Machine Details – PITTLER • Manufacturer: Pittler • Model/Type: LP03B • Serial Number: 2198 • Year of Manufacture: 2016 • TAR No.: 12244247 • Machine Weight: 19,500 kg • Country of Manufacture: Germany • CE Marked: Yes • Control System Manufacturer: Pittler T&S GmbH • Control System Type: Board PLS/G-RZ 10 Electrical Specifications: • Power Supply: 3-phase AC 400 V • Frequency: 50 Hz • Lighting Voltage: 42 V • Control Voltage: 230 V AC / 24 V DC • Control Fuse: 25 A • Max. Cable Length to Tool Head: 10 m • Coolant Supply Line: Connection as per site requirements

Condition: like new (used), Year of construction: 2005, turning length: 6,000 mm, spindle bore: 104 mm, workpiece weight (max.): 10,000 kg, Sauter 4 position revolver Chip conveyor Hfedpfx Aajxm Svuobjn Full C-Axis 360.000 Steady rest fixed up to 1000 mm INDAUXMAN 4 chuck 1000 mm SMW Autoblock 3 chuck 630 mm Optional boringbar L = 500 mm Optional boring bar L = 1000 mm Optional Package Sauter holder system (last pictures) Swing over bed Ø: 1300mm Swing over cross slide Ø:940mm DBC Turning Length: 6000mm Spindle bore: 104mm Spindle power: 37kW Bed width: 800mm Tailstock spindle Ø: 180Ø Stroke pinole: 300mm Spindle taper: 6Mk Workpiece weight: 10000 Length: 9500mm Width: 3400mm Height: 2900mm Weight: 24000kg

Condition: excellent (used), Year of construction: 1970, turning length 300 mm Hedjxmahljpfx Aabjfn weight of the machine ca. 0,4 t

Condition: good (used), Year of construction: 2006, functionality: fully functional, turning length: 500 mm, turning diameter: 320 mm, Fanuc Oi-Mate TC cnc control collet chuck device 12-fold revolver tail stock chip conveyor Technische Daten: / technical details max. Drehdurchmesser / max. turning diameter 320 mm Hfodpfx Aoxa A S Teabjn max. Drehlänge / max. turning lenght 500 mm X-Weg / X-travel 180 mm Z-Weg / Z-travel 520 mm max. Drehzahl / max. spindle speed 6000 UpM /rpm Anzahl der Revolverplätze / number of tool places 12 Gewicht ca. / weight ca. 3200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” Hodpfx Aaexnda Uobefn - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: used, turning length 1500 mm connected load 108 kVA total wight 19 t nominal voltage AV 400 V rated current 156 A In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 4 machines available. Hfodpfexl E Tqsx Aabsn Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Auction item. Hedpfjxmhr Sex Aabsfn Log house wall production line is in working condition. Sold as seen in photos and video.

Condition: used, Year of construction: 2000, functionality: fully functional, Lisec IGU line 1.6x2.5 + robot Hodpfx Aexnin Doabjfn Grinding of Lowe glass Washing machine Glass overview Press Robot Machine in working condition Height: 1.6 meters Length: 2.5 meters

Condition: used, Year of construction: 2013, turning length: 1,020 mm, turning diameter: 340 mm, spindle bore: 65 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 25 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,074 mm, total height: 2,487 mm, total length: 4,371 mm, total width: 2,536 mm, overall weight: 7,500 kg, CNC Control OSP P300L-R Turning diameter 340 mm Turning Length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3.000 R/min Spindle motor 15/11 kW Hjdpfx Aoxnmz Ueabsfn Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Spindle speed driven tools 45 - 4500 R/min Number of driven tools 12 x Tool Taper VDI Bar feeder LNS Alpha SL 65S If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Hjdjxnmzhepfx Aabefn Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Hodpfxjxnmxmj Aabjfn Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm Hjdpfx Aajxnmvfjbjfn W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.